Les cellules stromales multipotentes accélèrent la guérison de plaies cutanées chez les souris irradiées via la sécrétion de la chimiokine SDF-1α

Le traitement du cancer à l’aide d’une exposition aux radiations ionisantes (RI) peut mener au développement de plusieurs effets secondaires importants, dont un retard de réparation et de régénération des tissus. Les mécanismes responsables de ces effets demeurent largement inconnus encore aujourd’hui, ce qui a pour effet de limiter le développement d’approches thérapeutiques. À l’aide d’un modèle de guérison de plaie cutanée chez la souris, nous avons cherché à déterminer les mécanismes par lesquels l’exposition aux RI limite la régénération de la peau. Nos résultats démontrent que l’induction de la "stromal-derived growth factor 1α" (SDF-1α), une cytokine normalement surexprimée dans les tissus hypoxiques, est sévèrement diminuée dans les plaies de souris irradiées versus non-irradiées. Ce défaut corrèle avec un retard de guérison des plaies et est encore évident plusieurs mois suivant l’exposition aux RI, suggérant qu’il y a une altération permanente de la capacité de la peau à se réparer. Parce que SDF-1α est secrété principalement par les fibroblastes du derme, nous avons évalué le potentiel des cellules stromales multipotentes (MSCs), qui sont reconnues pour secréter des niveaux élevés de SDF-1α, à accélérer la régénération de la peau chez les souris irradiées. L’injection de MSCs en périphéries des plaies a mené à une accélération remarquable de la guérison de la peau chez les souris exposées aux RI. Les actions des MSCs étaient principalement paracrines, dû au fait que les cellules n’ont pas migré à l’extérieur de leur site d’injection et ne se sont pas différentiées en kératinocytes. L’inhibition spécifique de l’expression de SDF-1α a mené à une réduction drastique de l’efficacité des MSCs à accélérer la fermeture de plaie indiquant que la sécrétion de SDF-1α par les MSCs est largement responsable de leur effet bénéfique. Nous avons découvert aussi qu’un des mécanismes par lequel SDF-1α accélère la guérison de plaie implique l’augmentation de la vascularisation au niveau de la peau blessée. Les résultats présentés dans ce mémoire démontrent collectivement que SDF-1α est une importante cytokine dérégulée au niveau des plaies cutanées irradiées, et que le déclin du potentiel de régénération des tissus qui est observé suivant une exposition au RI peut être renversé, s’il est possible de restaurer le microenvironnement de la blessure avec un support stromal adéquat.

Amélioration de la prise de greffe hématopoïétique par une thérapie cellulaire à base de cellules souches mésenchymateuses

Le traitement du cancer à l’aide d’une exposition aux radiations ionisantes peut mener au développement de plusieurs effets secondaires importants, dont un retard de réparation et de régénération du tissu hématopoïétique. Les mécanismes responsables de ces effets demeurent encore inconnus, ce qui limite le développement de nouvelles approches thérapeutiques. À l’aide d’un modèle murin de prise de greffe, nos résultats démontrent que l’endommagement du microenvironnement par l’irradiation a un impact limitant sur le nichage hématopoïétique. Parce que le microenvironnement est composé principalement de cellules dérivées des cellules souches mésenchymateuses (CSM), nous avons évalué le potentiel des CSM à régénérer le tissu hématopoïétique par la reconstitution de la niche osseuse. Cette thérapie a mené à une augmentation remarquable du nichage hématopoïétique chez les souris irradiées. Les causes moléculaires impliquées dans le nichage hématopoïétiques sont encore inconnues, mais nous avons remarqué l’augmentation de la sécrétion de la cytokine « granulocyte-colony stimulating factor » (G-CSF) dans l’espace médullaire suite à l’irradiation. Le G-CSF est impliqué dans la mobilisation cellulaire et est fort possiblement nuisible à une prise de greffe. Nous avons évalué le potentiel d’une thérapie à base de CSM sécrétant le récepteur soluble du G-CSF afin de séquestrer le G-CSF transitoirement et les résultats obtenus démontrent que le blocage du G-CSF favorise le nichage hématopoïétique. Globalement, les données présentées dans ce mémoire démontrent que le microenvironnement osseux et le niveau de G-CSF dans la moelle sont importants dans le processus de nichage hématopoïétique et que la baisse du potentiel de régénération du tissu hématopoïétique suite à l’irradiation peut être renversée à l’aide d’une thérapie cellulaire de CSM génétiquement modifiées ou non.

Rôle du facteur de transcription PITX1 dans la pathogenèse de l'arthrose.

L'arthrose ou ostéoarthrite (OA) est la plus commune des maladies chroniques associées au vieillissement. La multiplicité des loci et des polymorphismes associés à l'OA suggère l'implication de nombreuses voies de signalisation. La plupart des voies empruntées partagent des points en commun avec le processus d'ossification endochondrale. Dans l'arthrose, la réinitiation de ce processus pourrait être responsable de la dégradation du cartilage et de la présence d'ostéophytes. Un des gènes ayant fait surface autant dans l'OA que dans le développement musculosquelettique est PITX1. Contrairement à ce que son nom l'indique, PITX1 n'est pas seulement exprimé dans la glande pituitaire mais également dans l'os, le cartilage, les muscles et les fibroblastes. Pitx1 joue un rôle clé dans l'identité des membres inférieurs et son inactivation complète chez la souris mène à un phénotype ressemblant aux membres supérieurs. Moins sévère, son inactivation partielle provoque des symptômes apparentés à l'arthrose précoce chez la souris vieillissante. Chez l'humain, une perte d'expression de PITX1 est observée dans le cartilage OA de concert avec une augmentation des protéines EXTL3, REG1 et PARP1. Ces dernières pourraient favoriser la phase initiale de régénération associée à l'arthrose. Pour induire la prolifération des chondrocytes, de bas niveaux de PITX1 sont nécessaires. À l'inverse, de hauts niveaux de PITX1 pourraient prévenir la prolifération et être responsables du statut différencié des chondrocytes articulaires normaux. L'étude des mécanismes de régulation du gène PITX1 a mené à l'identification d'un co-répresseur, nommé prohibitine (PHB1), lié sur une région promotrice distale. PHB1 est normalement retrouvé au niveau des mitochondries mais son accumulation nucléaire semble corréler avec la perte de PITX1 et l'initiation de l'OA. Cette découverte pourrait avoir un impact sur le diagnostic et d'éventuels traitements visant à prévenir l'apparition de l'arthrose.

O empreendedorismo e a inovação na saúde, factores potenciadores de novos projetos

O objetivo geral deste trabalho é investigar o empreendedorismo e a inovação, assim como a forma como estes instrumentos se têm ligado, ou podem vir a ligar-se, à atividade da saúde potenciando novos projetos empresariais inovadores com elevados níveis de competitividade e rentabilidade, numa lógica de criação de um modelo que sintetize estes instrumentos e os potencie para resultados noutros projetos empresariais. No seu desenvolvimento, pretende-se compreender e melhorar a influência positiva que o empreendedorismo e a inovação têm na área da saúde e compreender a influência destes instrumentos como fatores potenciadores de novos projetos contribuindo para a regeneração dos tecidos empresariais, quer ao nível da criação de novas empresas inovadoras, quer ao nível da modernização, reposicionamento ou reorientação de empresas existentes. O objetivo específico desta investigação sobre empreendedorismo e inovação na saúde, como fatores potenciadores de novos projetos, pode evidenciar sinais de êxito mais evidentes, que permita tirar ilações da importância das sinergias entre empreendedorismo e inovação, nas suas várias vertentes da saúde, que alavanquem novas oportunidades para projetos empresariais, sustentáveis e com forte probabilidade de sucesso, muitos deles já identificados, mas ainda não desenvolvidos quer por potenciais empreendedores ou investidores.

Imagem por Ressonância Magnética : uma ferramenta poderosa para a Engenharia de Tecidos. Uma revisão atualizada

A Engenharia de Tecidos (ET) é uma área de investigação crescente que se direciona à criação de substitutos biológicos funcionais para vários tecidos do corpo humano. Requer condições específicas favoráveis para a regeneração de tecidos, e o resultado do tecido engenheirado deve ser avaliado objetivamente. A Imagem por Ressonância Magnética (IRM) é uma das técnicas mais promissoras para este efeito. Esta revisão discute as publicações mais recentes acerca das várias técnicas baseadas na IRM disponíveis para a avaliação de tecidos engenheirados e as presentes aplicações da IRM na ET.

Adult skeletal muscle stem cell migration is mediated by a blebbing/amoeboid mechanism

Adult skeletal muscle possesses a resident stem cell population called satellite cells which are responsible for tissue repair following damage. Satellite cell migration is crucial in promoting rapid tissue regeneration but is a poorly understood process. Furthermore, the mechanisms facilitating satellite cell movement have yet to be elucidated. Here the process of satellite cell migration has been investigated revealing that they undergo two distinct phases of movement; firstly under the basal lamina and then rapidly increasing their velocity when on the myofibre surface. Most significantly we show that satellite cells move using a highly dynamic blebbing based mechanism and not via lamellopodia mediated propulsion. We show that nitric oxide and non-canonical Wnt signalling pathways are necessary for regulating the formation of blebs and the migration of satellite cells. In summary, we propose that the formation of blebs and their necessity for satellite cell migration has significant implications in the future development of therapeutic regimes aimed at promoting skeletal muscle regeneration.

Highly efficient neural differentiation of human somatic stem cells, isolated by minimally invasive periodontal surgery

Neural stem cells (NSCs) are potential sources for cell therapy of neurodegenerative diseases and for drug screening. Despite their potential benefits, ethical and practical considerations limit the application of NSCs derived from human embryonic stem cells (ES) or adult brain tissue. Thus, alternative sources are required to satisfy the criteria of ready accessibility, rapid expansion in chemically defined media and reliable induction to a neuronal fate. We isolated somatic stem cells from the human periodontium that were collected during minimally invasive periodontal access flap surgery as part of guided tissue regeneration therapy. These cells could be propagated as neurospheres in serum-free medium, which underscores their cranial neural crest cell origin. Culture in the presence of epidermal growth factor (EGF) and fibroblast growth factor-2 (FGF-2) under serum-free conditions resulted in large numbers of nestin-positive/Sox-2-positive NSCs. These periodontium-derived (pd) NSCs are highly proliferative and migrate in response to chemokines that have been described as inducing NSC migration. We used immunocytochemical techniques and RT-PCR analysis to assess neural differentiation after treatment of the expanded cells with a novel induction medium. Adherence to substrate, growth factor deprivation, and retinoic acid treatment led to the acquisition of neuronal morphology and stable expression of markers of neuronal differentiation by more than 90% of the cells. Thus, our novel method might provide nearly limitless numbers of neuronal precursors from a readily accessible autologous adult human source, which could be used as a platform for further experimental studies and has potential therapeutic implications.

Collagen membranes at immediate implants: a histomorphometric study in dogs

Aim To evaluate the influence of resorbable membranes on hard tissue alterations and osseointegration at implants placed into extraction sockets in a dog model. Material and methods In the mandibular premolar region, implants were installed immediately into the extraction sockets of six Labrador dogs. Collagen-resorbable membranes were placed at the test sites, while the control sites were left uncovered. Implants were intended to heal in a submerged mode. After 4 months of healing, the animals were sacrificed, and ground sections were obtained for histomorphometric evaluation. Results After 4 months of healing, a control implant was not integrated (n=5). Both at the test and at the control sites, bone resorption occurred. While the most coronal bone-to-implant contact was similar between the test and the control sites, the alveolar bone crest outline was maintained to a higher degree at the buccal aspect of the test sites (loss: 1.7 mm) compared with the control sites (loss: 2.2 mm). Conclusions The use of collagen-resorbable membranes at implants immediately placed into extraction sockets contributed to a partial (23%) preservation of the buccal outline of the alveolar process. To cite this article:Caneva M, Botticelli D, Salata LA, Souza SLS, Carvalho Cardoso L, Lang NP. Collagen membranes at immediate implants: a histomorphometric study in dogs.Clin. Oral Impl. Res. 21, 2010; 891-897.doi: 10.1111/j.1600-0501.2010.01946.x.

The Bone Formation Capabilities of the Anorganic Bone Matrix-Synthetic Cell-Binding Peptide 15 Grafts in an Animal Periodontal Model: A Histologic and Histomorphometric Study in Dogs

Background: The aim of this study is to verify the regenerative potential of particulate anorganic bone matrix synthetic peptide-15 (ABM-P-15) in class III furcation defects associated or not with expanded polytetrafluoroethylene membranes. Methods: Class III furcation defects were produced in the mandibular premolars (P2, P3, and P4) of six dogs and filled with impression material. The membranes and the bone grafts were inserted into P3 and P4, which were randomized to form the test and control groups, respectively; P2 was the negative control group. The animals were sacrificed 3 months post-treatment. Results: Histologically, the complete closure of class III furcation defects was not observed in any of the groups. Partial periodontal regeneration with similar morphologic characteristics among the groups was observed, however, through the formation of new cementum, periodontal ligament, and bone above the notch. Histologic analysis showed granules from the bone graft surrounded by immature bone matrix and encircled by newly formed tissue in the test group. The new bone formation area found in the negative control group was 2.28 +/- 2.49 mm(2) and in the test group it was 6.52 +/- 5.69 mm(2), which showed statistically significant differences for these groups considering this parameter (Friedman test P <0.05). There was no statistically significant difference among the negative control, control, and test groups for the other parameters. Conclusions: The regenerative potential of ABM-P-15 was demonstrated through new bone formation circumscribing and above the graft particles. The new bone also was accompanied by the formation of new cementum and periodontal ligament fibers. J Periodontol 2010;81:594-603.

Influence of implant positioning in extraction sockets on osseointegration: histomorphometric analyses in dogs

Aim To evaluate the influence of implant positioning into extraction sockets on osseointegration. Material and methods Implants were installed immediately into extraction sockets in the mandibles of six Labrador dogs. In the control sites, the implants were positioned in the center of the alveolus, while in the test sites, the implants were positioned 0.8 mm deeper and more lingually. After 4 months of healing, the resorptive patterns of the alveolar crest were evaluated histomorphometrically. Results All implants were integrated in mineralized bone, mainly composed of mature lamellar bone. The alveolar crest underwent resorption at the control as well as at the test sites. After 4 months of healing, at the buccal aspects of the control and test sites, the location of the implant rough/smooth limit to the alveolar crest was 2 +/- 0.9 mm and 0.6 +/- 0.9 mm, respectively (P < 0.05). At the lingual aspect, the bony crest was located 0.4 mm apically and 0.2 mm coronally to the implant rough/smooth limit at the control and test sites, respectively (NS). Conclusions From a clinical point of view, implants installed into extraction sockets should be positioned approximately 1 mm deeper than the level of the buccal alveolar crest and in a lingual position in relation to the center of the alveolus in order to reduce or eliminate the exposure above the alveolar crest of the endosseous (rough) portion of the implant. To cite this article:Caneva M, Salata LA, de Souza SS, Baffone G, Lang NP, Botticelli D. Influence of implant positioning in extraction sockets on osseointegration: histomorphometric analyses in dogs.Clin. Oral Impl. Res. 21, 2010; 43-49.

Histological Outcomes on the Development of New Space-making Devices for Maxillary Sinus Floor Augmentation

Background: Previous studies have pointed out that the mere elevation of the maxillary sinus membrane promotes bone formation without the use of augmentation materials. Purpose: This experimental study aimed at evaluating if the two-stage procedure for sinus floor augmentation could benefit from the use of a space-making device in order to increase the bone volume to enable later implant installation with good primary stability. Materials and Methods: Six male tufted capuchin primates (Cebus apella) were subjected to extraction of the three premolars and the first molar on both sides of the maxilla to create an edentulous area. The sinuses were opened using the lateral bone-wall window technique, and the membrane was elevated. One resorbable space-making device was inserted in each maxillary sinus, and the bone window was returned in place. The animals were euthanatized after 6 months, and biopsy blocks containing the whole maxillary sinus and surrounding soft tissues were prepared for ground sections. Results: The histological examination of the specimens showed bone formation in contact with both the schneiderian membrane and the device in most cases even when the device was displaced. The process of bone formation indicates that this technique is potentially useful for two-stage sinus floor augmentation. The lack of stabilization of the device within the sinus demands further improvement of space-makers for predictable bone augmentation. Conclusions: It is concluded that (1) the device used in this study did not trigger any important inflammatory reaction; (2) when the sinus membrane was elevated, bone formation was a constant finding; and (3) an ideal space-making device should be stable and elevate the membrane to ensure a maintained connection between the membrane and the secluded space.

Ridge Preservation With Acellular Dermal Matrix and Anorganic Bone Matrix Cell-Binding Peptide P-15 After Tooth Extraction in Humans

Background: Preventing ridge collapse with the extraction of maxillary anterior teeth is vital to an esthetic restorative result. Several regenerative techniques are available and are used for socket preservation. The aim of this study is to analyze by clinical parameters the use of acellular dermal matrix (ADM) and anorganic bovine bone matrix (ABM) with synthetic cell-binding peptide P-15 to preserve alveolar bone after tooth extraction. Methods: Eighteen patients in need of extraction of maxillary anterior teeth were selected and randomly assigned to the test group (ADM plus ABM/P-15) or the control group (ADM only). Clinical measurements were recorded initially and at 6 months after ridge-preservation procedures. Results: In the clinical measurements (external vertical palatal measurement [EVPM], external vertical buccal measurement [EVBM], and alveolar horizontal measurement [AHM]) the statistical analysis showed no difference between test and control groups initially and at 6 months. The intragroup analysis, after 6 months, showed a statistically significant reduction in the measurements for both groups. In the comparison between the two groups, the differences in the test group were as follows: EVPM = 0.83 +/- 1.53 mm; EVBM = 1.20 +/- 2.02 mm; and AHM = 2.53 +/- 1.81 mm. The differences in the control group were as follows: EVPM = 0.87 +/- 1.13 mm; EVBM = 1.50 +/- 1.15 mm; and AHM = 3.40 +/- 1.39 mm. The differences in EVPM and EVBM were not statistically significant; however, in horizontal measurement (AHM), there was a statistically significant difference (P<0.05). Conclusion: The results of this study show that ADM used as membrane associated with ABM/P-15 can be used to reduce buccal-palatal dimensions compared to ADM alone for preservation of the alveolar ridge after extraction of anterior maxillary teeth. J Periodontol 2011;82:72-79.

Compressibility of porous magnesium foam: dependency on porosity and pore size

Mechanical properties of porous magnesium with the porosity of 35–55% and the pore size of about 70–400 μm are investigated by compressive tests focusing on the effects of the porosity and pore size on the Young's modulus and strength. Results indicated that the Young's modulus and peak stress increase with decreasing porosity and pore size. The mechanical properties of the porous magnesium were in a range of those of cancellous bone. Therefore, it is suggested that the porous magnesium is one of promising scaffold materials for hard tissue regeneration.

Functionalization of dendrimers for improved gene delivery to mesenchymal stem cell

Disease, injury, and age problems compromise human quality of life and continuously motivate the search for new and more efficacious therapeutic approaches. The field of Tissue Regeneration and Engineering has greatly evolved over the last years, mainly due to the combination of the important advances verified in Biomaterials Science and Engineering with those of Cell and Molecular Biology. In particular, a new and promising area arose – Nanomedicine – that takes advantage of the extremely small size and especial chemical and physical properties of Nanomaterials, offering powerful tools for health improvement. Research on Stem Cells, the self-renewing progenitors of body tissues, is also challenging to the medical and scientific communities, being expectable the appearance of new and exciting stem cell-based therapies in the next years. The control of cell behavior (namely, of cell proliferation and differentiation) is of key importance in devising strategies for Tissue Regeneration and Engineering. Cytokines, growth factors, transcription factors and other signaling molecules, most of them proteins, have been identified and found to regulate and support tissue development and regeneration. However, the application of these molecules in long-term regenerative processes requires their continuous presence at high concentrations as they usually present short half-lives at physiological conditions and may be rapidly cleared from the body. Alternatively, genes encoding such proteins can be introduced inside cells and be expressed using cell’s machinery, allowing an extended and more sustained production of the protein of interest (gene therapy). Genetic engineering of stem cells is particularly attractive because of their self-renewal capability and differentiation potential. For Tissue Regeneration and Engineering purposes, the patient’s own stem cells can be genetically engineered in vitro and, after, introduced in the body (with or without a scaffold) where they will not only modulate the behavior of native cells (stem cell-mediated gene therapy), but also directly participate in tissue repair. Cells can be genetically engineered using viral and non-viral systems. Viruses, as a result of millions of years of evolution, are very effective for the delivery of genes in several types of cells, including cells from primary sources. However, the risks associated with their use (like infection and immunogenic reactions) are driving the search for non-viral systems that will efficiently deliver genetic material into cells. Among them, chemical methods that are promising and being investigated use cationic molecules as carriers for DNA. In this case, gene delivery and gene expression level remain relatively low when primary cells are used. The main goal of this thesis was to develop and assess the in vitro potential of polyamidoamine (PAMAM) dendrimers based carriers to deliver genes to mesenchymal stem cells (MSCs). PAMAM dendrimers are monodispersive, hyperbranched and nanospherical molecules presenting unique characteristics that make them very attractive vehicles for both drug and gene delivery. Although they have been explored for gene delivery in a wide range of cell lines, the interaction and the usefulness of these molecules in the delivery of genes to MSCs remains a field to be explored. Adult MSCs were chosen for the studies due to their potential biomedical applications (they are considered multipotent cells) and because they present several advantages over embryonic stem cells, such as easy accessibility and the inexistence of ethical restrictions to their use. This thesis is divided in 5 interconnected chapters. Chapter I provides an overview of the current literature concerning the various non-viral systems investigated for gene delivery in MSCs. Attention is devoted to physical methods, as well as to chemical methods that make use of polymers (natural and synthetic), liposomes, and inorganic nanoparticles as gene delivery vectors. Also, it summarizes the current applications of genetically engineered mesenchymal stem cells using non-viral systems in regenerative medicine, with special focus on bone tissue regeneration. In Chapter II, the potential of native PAMAM dendrimers with amine termini to transfect MSCs is evaluated. The level of transfection achieved with the dendrimers is, in a first step, studied using a plasmid DNA (pDNA) encoding for the β-galactosidase reporter gene. The effect of dendrimer’s generation, cell passage number, and N:P ratio (where N= number of primary amines in the dendrimer; P= number of phosphate groups in the pDNA backbone) on the level of transfection is evaluated, being the values always very low. In a second step, a pDNA encoding for bone morphogenetic protein-2, a protein that is known for its role in MSCs proliferation and differentiation, is used. The BMP-2 content produced by transfected cells is evaluated by an ELISA assay and its effect on the osteogenic markers is analyzed through several classical assays including alkaline phosphatase activity (an early marker of osteogenesis), osteocalcin production, calcium deposition and mineralized nodules formation (late osteogenesis markers). Results show that a low transfection level is enough to induce in vitro osteogenic differentiation in MSCs. Next, from Chapter III to Chapter V, studies are shown where several strategies are adopted to change the interaction of PAMAM dendrimers with MSCs cell membrane and, as a consequence, to enhance the levels of gene delivery. In Chapter III, generations 5 and 6 of PAMAM dendrimers are surface functionalized with arginine-glycine-aspartic acid (RGD) containing peptides – experiments with dendrimers conjugated to 4, 8 and 16 RGD units were performed. The underlying concept is that by including the RGD integrin-binding motif in the design of the vectors and by forming RGD clusters, the level of transfection will increase as MSCs highly express integrins at their surface. Results show that cellular uptake of functionalized dendrimers and gene expression is enhanced in comparison with the native dendrimers. Furthermore, gene expression is dependent on both the electrostatic interaction established between the dendrimer moiety and the cell surface and the nanocluster RGD density. In Chapter IV, a new family of gene delivery vectors is synthesized consisting of a PAMAM dendrimer (generation 5) core randomly linked at the periphery to alkyl hydrophobic chains that vary in length and number. Herein, the idea is to take advantage of both the cationic nature of the dendrimer and the capacity of lipids to interact with biological membranes. These new vectors show a remarkable capacity for internalizing pDNA, being this effect positively correlated with the –CH2– content present in the hydrophobic corona. Gene expression is also greatly enhanced using the new vectors but, in this case, the higher efficiency is shown by the vectors containing the smallest hydrophobic chains. Finally, chapter V reports the synthesis, characterization and evaluation of novel gene delivery vectors based on PAMAM dendrimers (generation 5) conjugated to peptides with high affinity for MSCs membrane binding - for comparison, experiments are also done with a peptide with low affinity binding properties. These systems present low cytotoxicity and transfection efficiencies superior to those of native dendrimers and partially degraded dendrimers (Superfect®, a commercial product). Furthermore, with this biomimetic approach, the process of gene delivery is shown to be cell surface receptor-mediated. Overall, results show the potential of PAMAM dendrimers to be used, as such or modified, in Tissue Regeneration and Engineering. To our knowledge, this is the first time that PAMAM dendrimers are studied as gene delivery vehicles in this context and using, as target, a cell type with clinical relevancy. It is shown that the cationic nature of PAMAM dendrimers with amine termini can be synergistically combined with surface engineering approaches, which will ultimately result in suitable interactions with the cytoplasmic membrane and enhanced pDNA cellular entry and gene expression. Nevertheless, the quantity of pDNA detected inside cell nucleus is always very small when compared with the bigger amount reaching cytoplasm (accumulation of pDNA is evident in the perinuclear region), suggesting that the main barrier to transfection is the nuclear membrane. Future work can then be envisaged based on the versatility of these systems as biomedical molecular materials, such as the conjugation of PAMAM dendrimers to molecules able to bind nuclear membrane receptors and to promote nuclear translocation.