Efeito da adição de agentes tróficos na dieta de leitões desmamados sobre a estrutura e ultraestrutura do intestino delgado e sobre o desempenho

Foram estudados os efeitos da glutamina, dos ácidos graxos poli-insaturados e da parede celular de levedura (PCL) sobre a estrutura e ultraestrutura do intestino delgado e o desempenho de leitões. Foram utilizados 45 leitões, desmamados aos 21 dias de idade, para testar os seguintes tratamentos: T1 - dieta basal; T2 - dieta basal + 1% de glutamina; T3 - dieta basal + 0,2% de PCL; T4 - dieta basal + 5% de óleo de peixe. Nos dias sete e 14 pós-desmame, foram abatidos cinco leitões de cada tratamento. Os aditivos testados não alteraram a altura e a densidade dos vilos nem a profundidade das criptas do intestino delgado. Foi observado efeito de idade, mostrando redução na altura e na densidade dos vilos e na profundidade das criptas após o desmame. No duodeno e jejuno, foram observados maiores valores de relação vilo:cripta, que aumentaram com a idade pós-desmame. Ocorreram redução da altura dos microvilos do duodeno aos sete dias e aumento da largura dos microvilos do jejuno aos 14 dias pós-desmame. A área de superfície apical dos enterócitos não foi alterada pelos fatores estudados. Os aditivos estudados não foram eficientes em prevenir a atrofia da mucosa intestinal do jejuno, ao não interferir na sua ultraestrutura. Os aditivos incluídos na dieta não influenciaram o desempenho dos leitões no pós-desmame.

Avaliação de níveis e fontes de proteína na alimentação de leitões na fase inicial de crescimento

Um experimento foi conduzido para comparar diversos níveis e fontes protéicas utilizados em rações sobre o desempenho, a morfometria intestinal e a relação peso de pâncreas/peso de carcaça de leitões de 36 a 70 dias de idade. Foram utilizados 96 leitões desmamados distribuídos em delineamento de blocos ao acaso com seis tratamentos e quatro repetições de quatro animais. Avaliaram-se seis fontes protéicas (tratamentos): leite em pó desnatado (8,80 e 12,00%); isolado protéico de soja (3,20 e 4,50%); farinha de peixe (5,00%); e levedura seca (10,00%). As dietas, isoenergéticas e isoprotéicas, não afetaram o ganho de peso e a conversão alimentar dos animais, contudo, os animais que receberam a dieta contendo leite em pó desnatado apresentaram maior consumo no período de 56 a 63 dias de idade. Não houve efeito significativo das fontes protéicas sobre a altura de vilos, a profundidade de cripta e a relação peso do pâncreas/peso corporal. As fontes protéicas estudadas e os níveis utilizados nas dietas não influenciaram o desempenho, a morfologia intestinal e a relação peso de pâncreas/peso de carcaça em leitões de 36 a 70 dias de idade

Disponibilidade e absorção de aminoácidos em bovinos alimentados com diferentes fontes de compostos nitrogenados

Objetivou-se estudar o fluxo e a absorção de aminoácidos em bovinos alimentados com dietas isoprotéicas formuladas com diferentes fontes nitrogenadas. As dietas foram fornecidas a bezerros holandeses canulados no abomaso, com 8 meses de idade e peso médio de 187 kg, em um total de 21 animais escolhidos aleatoriamente para formar o grupo que constituiu as repetições experimentais (sete por tratamento). As dietas experimentais foram constituídas de 40% de volumoso e 60% de concentrado. Como volumoso, utilizou-se feno de capim-de-rhodes e, no concentrado, utilizaram-se milho, farelo de algodão, levedura, uréia, melaço e minerais. As dietas diferiram apenas quanto à fonte nitrogenada (farelo de algodão, levedura ou uréia). As quantidades (g/dia) de aminoácidos no abomaso e a composição em aminoácidos da proteína presente no abomaso e nas fezes foram influenciadas pela fonte protéica da dieta. As fontes nitrogenadas não afetaram significativamente a digestão de aminoácidos no intestino. A disponibilidade de aminoácidos no abomaso e a absorção no intestino apresentaram valores inferiores aos descritos na literatura, provavelmente porque, neste trabalho, os animais foram submetidos à restrição de ingestão. As fontes nitrogenadas testadas influenciaram a composição e a disponibilidade de aminoácidos em bovinos.

Composição em ácidos graxos e qualidade da carne de tourinhos Nelore e Canchim alimentados com dietas à base de cana-de-açúcar e dois níveis de concentrado

O objetivo neste trabalho foi avaliar a composição de ácidos graxos e a qualidade do contrafilé (músculo Longissimus lumborum) de tourinhos das raças Nelore e Canchim. Os animais foram terminados em confinamento e alimentados com dietas contendo cana-de-açúcar e dois níveis de concentrado (40 e 60% na matéria seca). Os concentrados foram compostos de grãos de girassol, milho, farelo de soja, levedura seca de cana-de-açúcar, uréia e núcleo mineral. O delineamento experimental foi o inteiramente ao acaso, em esquema fatorial 2 × 2 (grupo genético × nível de concentrado). Não foram observadas diferenças nos teores de umidade, proteína e extrato etéreo da carne. Os animais da raça Nelore apresentaram maiores concentrações de ácido linoléico conjugado (0,52%), ácidos graxos insaturados (46,82%) e também relações mais elevadas de ácidos graxos insaturados:saturados (1,02) e monoinsaturados:saturados (0,86) em comparação aos tourinhos da raça Canchim. Os tourinhos da raça Canchim apresentaram maior intensidade das cores vermelha e amarela no contrafilé e maior luminosidade da gordura de cobertura. Houve interação para força de cisalhamento, que foi menor nos tourinhos Nelore alimentados com 40% de concentrado. Tourinhos da raça Nelore apresentam carne com melhor composição de ácidos graxos na gordura intramuscular do ponto de vista da saúde humana.

Fermentação alcoólica utilizando líquido da casca de coco verde como fonte de nutrientes

The liquid of the rind of green coconut (LCCV), an effluent stream from the industrial processing of green coconut rind, is rich in sugars and is a suitable feedstock for fermentation. The first step of this study was to evaluate the potential of natural fermentation of LCCV. As the literature did not provide any information about LCCV and due to the difficulty of working with such an organic effluent, the second step was to characterize the LCCV and to develop a synthetic medium to explore its potential as a bioprocess diluent. The third step was to evaluate the influence of initial condensed and hydrolysable tannins on alcoholic fermentation. The last step of this work was divided into several stages: in particular to evaluate (1) the influence of the inoculum, temperature and agitation on the fermentation process, (2) the carbon source and the use of LCCV as diluent, (3) the differences between natural and synthetic fermentation of LCCV, in order to determine the best process conditions. Characterization of LCCV included analyses of the physico-chemical properties as well as the content of DQO, DBO and series of solids. Fermentation was carried out in bench-scale bioreactors using Saccharomyces cerevisiae as inoculum, at a working volume of 5L and using 0.30% of soy oil as antifoam. During fermentations, the effects of different initial sugars concentrations (10 - 20%), yeast concentrations (5 and 7.5%), temperatures (30 - 50°C) and agitation rates (400 and 500 rpm) on pH/sugars profiles and ethanol production were evaluated. The characterization of LCCV demonstrated the complexity and variability of the liquid. The best conditions for ethanol conversion were (1) media containing 15% of sugar; (2) 7.5% yeast inoculum; (3) temperature set point of 40°C and (4) an agitation rate of 500 rpm, which resulted in an ethanol conversion rate of 98% after 6 hours of process. A statistical comparison of results from natural and synthetic fermentation of LCCV showed that both processes are similar

Avaliação, identificação e atividade enzimática de bactérias psicotróficas presentes no leite cru refrigerado

Extended storage of refrigerated milk can lead to reduced quality of raw and processed milk, which is a consequence of the growth and metabolic activities of psychrotrophic bacteria, able to grow under 7oC or lower temperatures. Although most of these microorganisms are destroyed by heat treatment, some have the potential to produce termoresistant proteolytic and lipolytic enzymes that can survive even UHT processing and reduce the processed products quality. Recently, the IN 51 determineds that milk should be refrigerated and stored at the farm what increased the importance of this group of microorganisms. In this work, psychrotrophic bacteria were isolated from 20 communitarian bulk tanks and 23 individual bulk tanks from dairy farms located at Zona da Mata region of Minas Gerais State and from southeastern Rio de Janeiro. Selected milk dilutions were plated on standard agar and after incubation for 10 days at 7oC, five colonies were isolated, firstly using nutrient agar and after using McConkey agar for 24 hours at 21oC. The isolates were identified by morphology, Gram stain method, catalase production, fermentative/oxidative metabolism and by API 20E, API 20NE, API Staph, API Coryne or API 50 CH (BioMerieux). In order to ensure reproductibility, API was repeated for 50% of the isolates. Species identification was considered when APILAB indexes reached 75% or higher. 309 strains were isolated, 250 Gram negative and 59 Gram positive. 250 Gram negative isolates were identified as: Acinetobacter spp. (39), Aeromonas spp. (07), A. Hydrophila (16), A. sobria (1), A. caviae (1), Alcaligenes feacalis (1), Burkholderia cepacia (12), Chryseomonas luteola (3), Enterobacter sp. (1), Ewingella americana(6), Hafnia alvei (7), Klebsiella sp. (1), Klebsiella oxytoca (10), Yersinia spp. (2), Methylobacterium mesophilicum (1), Moraxella spp. (4), Pantoea spp. (16), Pasteurella sp. (1), Pseudomonas spp. (10), P. fluorescens (94), P. putida (3), Serratia spp. (3), Sphigomonas paucomobilis (1). Five isolates kept unidentified. Pseudomonas was the predominant bacteria found (43%) and P. fluorescens the predominant species (37.6%), in accordance with previous reports. Qualitative analysis of proteolytic and lipolytic activity was based on halo formation using caseinate agar and tributirina agar during 72 hours at 21oC and during 10 days at 4°C, 10oC and 7°C. Among 250 Gram negative bacteria found, 104 were identified as Pseudomonas spp. and 60,57% of this group showed proteolytic and lipolytic acitivities over all four studied temperatures. 20% of Acinetobacter, Aeromonas, Alcaligenes, Burkholderia, Chryseomonas, Methylobacterium, Moraxella presented only lipolytic activity. Some isolates presented enzymatic activity in one or more studied temperatures. Among Gram positive bacteria, 30.51% were proteolytic and lipolytic at 10oC, 8.47% were proteolytic at 7oC, 10oC, and 21oC, 8.47% were proteolytic at all studied temperatures (4oC, 7oC, 10oC and 21oC) and 3.38% were proteolytic only at 21oC. At 4oC, only one isolate showed proteolytic activity and six isolates were lipolytic. In relation to Gram negative microorganisms, 4% were proteolytic and lipolytic at 7oC, 10oC and 21oC, 10% were proteolytic at 10oC and 4.4% were lipolytic at 4oC, 7oC, 10oC and 21oC, while 6.4% of all isolates were proteolytic and lipolytic at 10oC and 21oC as well as lipolytic at 4oC and 7oC. These findings are in accordance with previous researches that pointed out Pseudomonas as the predominant psycrotrophic flora in stored refrigerated raw milk

Efeito de variáveis de processo no tempo de fermentação e na concentração das dicetonas vicinais totais

Among the main challenges in the beer industrial production is the market supply at the lowest cost and high quality, in order to ensure the expectations of customers and. consumers The beer fermentation stage represents approximately 70% of the whole time necessary to its production, having a obligatoriness of strict process controls to avoid becoming bottleneck in beer production. This stage is responsible for the formation of a series of subproducts, which are responsible for the composition of aroma/bouquet existing in beer and some of these subproducts, if produced in larger quantities, they will confer unpleasant taste and odor to the final product. Among the subproducts formed during the fermentation stage, total vicinal diketones is the main component, since it is limiting for product transfusion to the subsequent steps, besides having a low perception threshold by the consumer and giving undesirable taste and odor. Due to the instability of main raw materials quality and also process controls during fermentation, the development of alternative forms of beer production without impacting on total fermentation time and final product quality is a great challenge to breweries. In this work, a prior acidification of the pasty yeast was carried out, utilizing for that phosphoric acid, food grade, reducing yeast pH of about 5.30 to 2.20 and altering its characteristic from flocculent to pulverulent during beer fermentation. An increase of six times was observed in amount of yeast cells in suspension in the second fermentation stage regarding to fermentations by yeast with no prior acidification. With alteration on two input variables, temperature curve and cell multiplication, which goal was to minimize the maximum values for diketones detected in the fermenter tank, a reduction was obtained from peak of formed diacetyl and consequently contributed to reduction in fermentation time and total process time. Several experiments were performed with those process changes in order to verify the influence on the total fermentation time and total vicinal diketones concentration at the end of fermentation. This experiment reached as the best production result a total fermentation time of 151 hours and total vicinal diketone concentration of 0.08 ppm. The mass of yeast in suspension in the second phase of fermentation increased from 2.45 x 106 to 16.38 x 106 cells/mL of yeast, which fact is key to a greater efficiency in reducing total vicinal diketones existing in the medium, confirming that the prior yeast acidification, as well as the control of temperature and yeast cell multiplication in fermentative process enhances the performance of diketones reduction and consequently reduce the total fermentation time with diketones concentration below the expected value (Max: 0.10 ppm)

Monitoramento em tempo real de processos fermentativos por espectroscopia no infravermelho próximo (NIRS)

A chemical process optimization and control is strongly correlated with the quantity of information can be obtained from the system. In biotechnological processes, where the transforming agent is a cell, many variables can interfere in the process, leading to changes in the microorganism metabolism and affecting the quantity and quality of final product. Therefore, the continuously monitoring of the variables that interfere in the bioprocess, is crucial to be able to act on certain variables of the system, keeping it under desirable operational conditions and control. In general, during a fermentation process, the analysis of important parameters such as substrate, product and cells concentration, is done off-line, requiring sampling, pretreatment and analytical procedures. Therefore, this steps require a significant run time and the use of high purity chemical reagents to be done. In order to implement a real time monitoring system for a benchtop bioreactor, these study was conducted in two steps: (i) The development of a software that presents a communication interface between bioreactor and computer based on data acquisition and process variables data recording, that are pH, temperature, dissolved oxygen, level, foam level, agitation frequency and the input setpoints of the operational parameters of the bioreactor control unit; (ii) The development of an analytical method using near-infrared spectroscopy (NIRS) in order to enable substrate, products and cells concentration monitoring during a fermentation process for ethanol production using the yeast Saccharomyces cerevisiae. Three fermentation runs were conducted (F1, F2 and F3) that were monitored by NIRS and subsequent sampling for analytical characterization. The data obtained were used for calibration and validation, where pre-treatments combined or not with smoothing filters were applied to spectrum data. The most satisfactory results were obtained when the calibration models were constructed from real samples of culture medium removed from the fermentation assays F1, F2 and F3, showing that the analytical method based on NIRS can be used as a fast and effective method to quantify cells, substrate and products concentration what enables the implementation of insitu real time monitoring of fermentation processes

Análise de fluxos metabólicos para otimização da síntese do antibiótico cosmomicina por Streptomyces olindensis ICB20

Metabolic flux analysis (MFA) is a powerful tool for analyzing cellular metabolism. In order to control the growth conditions of a specific organism, it is important to have a complete understanding of its MFA. This would allowed us to improve the processes for obtaining products of interest to human and also to understand how to manipulate the genome of a cell, allowing optimization process for genetic engineering. Streptomyces olindensis ICB20 is a promising producer of the antibiotic cosmomycin, a powerful antitumor drug. Several Brazilian researchers groups have been developing studies in order to optimize cosmomycin production in bioreactors. However, to the best of our knowledge, nothing has been done on metabolic fluxes analysis field. Therefore, the aim of this work is to identify several factors that can affect the metabolism of Streptomyces olindensis ICB20, through the metabolic flux analysis. As a result, the production of the secondary metabolite, cosmomycin, can be increased. To achieve this goal, a metabolic model was developed which simulates a distribution of internal cellular fluxes based on the knowledge of metabolic pathways, its interconnections, as well as the constraints of microorganism under study. The validity of the proposed model was verified by comparing the computational data obtained by the model with the experimental data obtained from the literature. Based on the analysis of intracellular fluxes, obtained by the model, an optimal culture medium was proposed. In addition, some key points of the metabolism of Streptomyces olindensis were identified, aiming to direct its metabolism to a greater cosmomycin production. In this sense it was found that by increasing the concentration of yeast extract, the culture medium could be optimized. Furthermore, the inhibition of the biosynthesis of fatty acids was found to be a interesting strategy for genetic manipulation. Based on the metabolic model, one of the optimized medium conditions was experimentally tested in order to demonstrate in vitro what was obtained in silico. It was found that by increasing the concentration of yeast extract in the culture medium would induce to an increase of the cosmomycin production

Otimização do meio de cultura para a produção de quitosanase por metarhizium anisopliae em cultivo descontínuo submerso

In this work a Plackett-Burman Design with 8 factors and 12 trials in 2 levels with 3 repetitions at the center point was used in order to investigate the influence of the concentration of chitosan, peptone, yeast extract, NaNO3, K2HPO4, KCl, MgSO4.7H2O and FeSO4 on chitosanase production by Metarhizium anisopliae. Runs were carried out using submerged discontinuous cultivation for enzyme production. The results of the Plackett & Burman Design showed that only two factors, chitosan concentration as well as FeSO4 had influence on chitosanolytic activity, while the increase in concentration of other factors not contributed significantly to the quitosanolítica activity. Cultivation medium optimization for enzyme production was carried out using a Composite Central Design, with the most important factors for chitosanolytic activity (chitosan and FeSO4), in accordance with Plackett & Burman Design, and keeping the other nutrients in their minimum values. On this other design, it was taken the highest limit in Plackett & Burman Design as the lowest limit (-1) to FeSO4 factor. The results showed that the enzyme production was favoured by increasing the chitosan concentration and by decreasing FeSO4. Maximum production for chitosanolytic activity was about 70.0 U/L and was reached in only 18 h of fermentation, a result about twenty-eight times greater than a former study using the same microorganism (about 2.5 U/L at 48 h)

Susceptibility of Saccharomyces cerevisiae and lactic acid bacteria from the alcohol industry to several antimicrobial compounds

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Quantificação da floculação de Saccharomyces cerevisiae por bactérias contaminantes da fermentação alcoólica

O assentamento de células de leveduras no fundo das dornas e perdas de células nas centrífugas podem ser causadas por bactérias floculantes, contaminantes naturais da fermentação alcoólica industrial. Estes problemas levam a queda no rendimento e produtividade do etanol. O presente trabalho visa a caracterização da floculação de Saccharomyces cerevisiae por Lactobacillus fermentum CCT 1396. As células de leveduras e bactérias foram misturadas e a floculação das células quantificadas por espectrofotometria. Concentrações de bactérias numa faixa de 0,4 a 3,8g/L (biomassa seca) foram testadas a fim de determinar a ótima concentração de bactérias necessária para provocar a floculação das leveduras. O efeito de pH na floculação das células de leveduras e bactérias foi determinado. 1,38g/L de bactéria foi necessário para a floculação, de 65,4g/L de células de levedura com tempo de contato entre as células (sob agitação) de 15 minutos e repouso de 20 minutos. No pH 3,0 pouco efeito na floculação celular foi detectado e as células continuaram floculadas, mas na faixa de pH 2,0 -- 2,5 a floculação foi próxima de zero. Esta técnica pode ser utilizada para o controle da floculação de leveduras de indústrias de produção de álcool, para determinar a origem desta floculação, já que trata-se de uma técnica fácil, econômica e rápida.

Prevalência e susceptibilidade de leveduras vaginais

Entre as vulvovaginites, a candidíase é apontada como a causa mais freqüente em mulheres na idade fértil. Atualmente, várias pesquisas mostram aumento na freqüência das espécies não-albicans e grande preocupação com episódios de repetição, assim como sua relação com a resistência ao tratamento. OBJETIVO: O presente estudo teve como objetivo verificar a distribuição de gêneros e espécies de leveduras causadoras de vaginite e analisar o perfil de sensibilidade das leveduras frente às drogas antifúngicas. MATERIAL E MÉTODO: Foram colhidas amostras de fluido vaginal de 250 pacientes para cultura, realizados identificação e antifungigrama dos isolados. RESULTADOS: Leveduras do gênero Candida estavam presentes em 27,6% das amostras. Candida albicans foi a levedura mais isolada em 74% dos casos, seguida de Candida glabrata, em 14,5%; Candida tropicalis, em 7,3%; e Candida parapsilosis, em 4,3%. Todos os isolados Candida albicans foram sensíveis à anfotericina B, e apenas um isolado da espécie não-albicans apresentou concentração inibitória mínima (CIM) mais elevada (2µg/ml). em Candida albicans, 5,9% das amostras mostraram-se sensíveis, dependendo da dose de fluconazol, e 9,8%, resistentes. Apenas um isolado mostrou-se resistente, com CIM de 8µg/ml, para itraconazol. Nas espécies não-albicans, 11,7% dos isolados foram considerados resistentes ao fluconazol e 23,5, ao itraconazol. CONCLUSÃO: Candida albicans foi a espécie mais freqüentemente encontrada na microbiota vaginal; no entanto, outras espécies foram também comuns nessa população. Porcentual importante de isolados de Candida albicans e não-albicans foi resistente a fluconazol e itraconazol, mostrando a importância de realização de testes de identificação e antifungigrama para os episódios de candidíase vaginal.

Efeito da temperatura de estocagem de leveduras de panificação sobre a atividade da glicerol-3-fosfato desidrogenase

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diversificação cariotípica em cinco espécies de moréias do Atlântico Ocidental (Anguilliformes)

The Anguiliformes is constituted by 15 families, 141 sorts and 737 species. In this group eight families possess at least one karyotyped species, where a prevalence of karyotypes with 2n=38 is evidenced chromosomes and high NF, apparently basal for the Anguiliformes. The only family who shows a different karyotypic pattern from the others is the Muraenidae family. In this, of the eight species already described, all of them present 2n=42 chromosomes. Despite the dimension of this Order, few species present karyotypics descriptions. In the present work, a species of Ophichthidae, Myrichthys ocellatus (2n=38, 8m+14sm+10st+6a, NF=70) and three species of Muraenidae, Enchelycore nigricans (2n=42, 6m+8sm+12st+16a, NF=68), Gymnothorax miliaris (2n=42, 14m+18sm+10st, NF=84), Gymnothorax vicinus (2n=42, 8m+6sm+28a, NF=56) and Muraena pavonina (2n=42, 6m+4sm+32a, NF=52), collected in the coast of the Rio Grande do Norte state, Saint Peter and Paul Rocks and in the coast of Bahia state were analyzed. Mitotics chromosomes had been gotten through mitotic stimulation with yeasts. Among the analyzed species, it is observed the presence of characteristic large metacentric chromosomic pairs (≅10µm). As for the structural standard, heterochromatics regions in these species in centromeric position of the majority of the chromosomic pairs and simple ribosomal sites had been evidenced. For the Ophichthidae family, the gotten data corroborate the hypothesis of karyotypic diversification mediated by the occurrence of pericentrics inversions and robertsonians rearrangements, while in the Muraenidae, the identification of larger chromosomic values (2n=42), suggests derived karyotypes, possibly caused by possible chromosomic fissions