The effects of negative affectivity on self-reported activity limitations in stroke patients:testing the symptom perception, disability and psychosomatic hypotheses

This study investigated whether Negative Affectivity (NA) causes bias in self-report measures of activity limitations or whether NA has a real, non-artifactual association with activity limitations. The Symptom Perception Hypothesis (NA negatively biases self-reporting), Disability Hypothesis (activity limitations cause NA) and Psychosomatic Hypothesis (NA causes activity limitations) were examined longitudinally using both self-report and objective activity limitations measures. Participants were 101 stroke patients and their caregivers interviewed within two weeks of discharge, six weeks later and six months post-discharge. NA and self-report, proxy-report and observed performance activity (walking) limitations were assessed at each interview. NA was associated with activity limitations across measures. Both the Disability and Psychosomatic Hypotheses were supported: initial NA predicted objective activity limitations at six weeks but, additionally, activity limitations at six weeks predicted NA at six months. These results suggest that NA both affects and is affected by activity limitations and does not simply influence reporting.

Analysis and design of power management scheme for an on-board solar energy storage system

This paper investigates the power management issues in a mobile solar energy storage system. A multi-converter based energy storage system is proposed, in which solar power is the primary source while the grid or the diesel generator is selected as the secondary source. The existence of the secondary source facilitates the battery state of charge detection by providing a constant battery charging current. Converter modeling, multi-converter control system design, digital implementation and experimental verification are introduced and discussed in details. The prototype experiment indicates that the converter system can provide a constant charging current during solar converter maximum power tracking operation, especially during large solar power output variation, which proves the feasibility of the proposed design. © 2014 IEEE.

Degree of vertical integration and its buffering effects on political uncertainty

The focus of this study is on the governance decisions in a concurrent channels context, in the case of uncertainty. The study examines how a firm chooses to deploy its sales force in times of uncertainty, and the subsequent performance outcome of those deployment choices. The theoretical framework is based on multiple theories of governance, including transaction cost analysis (TCA), agency theory, and institutional economics. Three uncertainty variables are investigated in this study. The first two are demand and competitive uncertainty which are considered to be industry-level market uncertainty forms. The third uncertainty, political uncertainty, is chosen as it is an important dimension of institutional environments, capturing non-economic circumstances such as regulations and political systemic issues. The study employs longitudinal secondary data from a Thai hotel chain, comprising monthly observations from January 2007 – December 2012. This hotel chain has its operations in 4 countries, Thailand, the Philippines, United Arab Emirates – Dubai, and Egypt, all of which experienced substantial demand, competitive, and political uncertainty during the study period. This makes them ideal contexts for this study. Two econometric models, both deploying Newey-West estimations, are employed to test 13 hypotheses. The first model considers the relationship between uncertainty and governance. The second model is a version of Newey-West, using an Instrumental Variables (IV) estimator and a Two-Stage Least Squares model (2SLS), to test the direct effect of uncertainty on performance and the moderating effect of governance on the relationship between uncertainty and performance. The observed relationship between uncertainty and governance observed follows a core prediction of TCA; that vertical integration is the preferred choice of governance when uncertainty rises. As for the subsequent performance outcomes, the results corroborate that uncertainty has a negative effect on performance. Importantly, the findings show that becoming more vertically integrated cannot help moderate the effect of demand and competitive uncertainty, but can significantly moderate the effect of political uncertainty. These findings have significant theoretical and practical implications, and extend our knowledge of the impact on uncertainty significantly, as well as bringing an institutional perspective to TCA. Further, they offer managers novel insight into the nature of different types of uncertainty, their impact on performance, and how channel decisions can mitigate these impacts.

Investigation of assessment methods for final year optometry undergraduates

This retrospective study was designed to investigate the factors that influence performance in examinations comprised of multiple-choice questions (MCQs), short-answer questions (SAQs), and essay questions in an undergraduate population. Final year optometry degree examination marks were analyzed for two separate cohorts. Direct comparison found that students performed better in MCQs than essays. However, forward stepwise regression analysis of module marks compared with the overall score showed that MCQs were the least influential, and the essay or SAQ mark was a more reliable predictor of overall grade. This has implications for examination design.

Computer control of chemical process plants with special reference to distillation

A sieve plate distillation column has been constructed and interfaced to a minicomputer with the necessary instrumentation for dynamic, estimation and control studies with special bearing on low-cost and noise-free instrumentation. A dynamic simulation of the column with a binary liquid system has been compiled using deterministic models that include fluid dynamics via Brambilla's equation for tray liquid holdup calculations. The simulation predictions have been tested experimentally under steady-state and transient conditions. The simulator's predictions of the tray temperatures have shown reasonably close agreement with the measured values under steady-state conditions and in the face of a step change in the feed rate. A method of extending linear filtering theory to highly nonlinear systems with very nonlinear measurement functional relationships has been proposed and tested by simulation on binary distillation. The simulation results have proved that the proposed methodology can overcome the typical instability problems associated with the Kalman filters. Three extended Kalman filters have been formulated and tested by simulation. The filters have been used to refine a much simplified model sequentially and to estimate parameters such as the unmeasured feed composition using information from the column simulation. It is first assumed that corrupted tray composition measurements are made available to the filter and then corrupted tray temperature measurements are accessed instead. The simulation results have demonstrated the powerful capability of the Kalman filters to overcome the typical hardware problems associated with the operation of on-line analyzers in relation to distillation dynamics and control by, in effect, replacirig them. A method of implementing estimator-aided feedforward (EAFF) control schemes has been proposed and tested by simulation on binary distillation. The results have shown that the EAFF scheme provides much better control and energy conservation than the conventional feedback temperature control in the face of a sustained step change in the feed rate or multiple changes in the feed rate, composition and temperature. Further extensions of this work are recommended as regards simulation, estimation and EAFF control.

Risk-based maintenance model for offshore oil and gas pipelines:a case study

Offshore oil and gas pipelines are vulnerable to environment as any leak and burst in pipelines cause oil/gas spill resulting in huge negative Impacts on marine lives. Breakdown maintenance of these pipelines is also cost-intensive and time-consuming resulting in huge tangible and intangible loss to the pipeline operators. Pipelines health monitoring and integrity analysis have been researched a lot for successful pipeline operations and risk-based maintenance model is one of the outcomes of those researches. This study develops a risk-based maintenance model using a combined multiple-criteria decision-making and weight method for offshore oil and gas pipelines in Thailand with the active participation of experienced executives. The model's effectiveness has been demonstrated through real life application on oil and gas pipelines in the Gulf of Thailand. Practical implications. Risk-based inspection and maintenance methodology is particularly important for oil pipelines system, as any failure in the system will not only affect productivity negatively but also has tremendous negative environmental impact. The proposed model helps the pipelines operators to analyze the health of pipelines dynamically, to select specific inspection and maintenance method for specific section in line with its probability and severity of failure.

Textbook on contract law

This ninth edition of the established Textbook on Contract Law by Jill Poole provides a wide-ranging and straightforward exposition of contract law. The text opens with an overview of the main issues surrounding contract law which places the subject in its wider context, then goes on to give a clear explanation of all the major areas of contract law encountered on undergraduate courses. Features of the book includes chapter summaries to draw key themes and issues together; examples and questions to encourage a deeper understanding of the often complex points of law; and extensive further reading lists of both texts and articles to guide students towards the most relevant and up-to-date resources available. Online resource centre Lecturer resources - Testbank of 150 multiple-choice questions Student resources - Guidance on answering questions in contract law - Questions and answers - Student questions - Updates - Web links

Detection of signals corrupted by the combination of Gaussian and Non-Gaussian noise

The detection of signals in the presence of noise is one of the most basic and important problems encountered by communication engineers. Although the literature abounds with analyses of communications in Gaussian noise, relatively little work has appeared dealing with communications in non-Gaussian noise. In this thesis several digital communication systems disturbed by non-Gaussian noise are analysed. The thesis is divided into two main parts. In the first part, a filtered-Poisson impulse noise model is utilized to calulate error probability characteristics of a linear receiver operating in additive impulsive noise. Firstly the effect that non-Gaussian interference has on the performance of a receiver that has been optimized for Gaussian noise is determined. The factors affecting the choice of modulation scheme so as to minimize the deterimental effects of non-Gaussian noise are then discussed. In the second part, a new theoretical model of impulsive noise that fits well with the observed statistics of noise in radio channels below 100 MHz has been developed. This empirical noise model is applied to the detection of known signals in the presence of noise to determine the optimal receiver structure. The performance of such a detector has been assessed and is found to depend on the signal shape, the time-bandwidth product, as well as the signal-to-noise ratio. The optimal signal to minimize the probability of error of; the detector is determined. Attention is then turned to the problem of threshold detection. Detector structure, large sample performance and robustness against errors in the detector parameters are examined. Finally, estimators of such parameters as. the occurrence of an impulse and the parameters in an empirical noise model are developed for the case of an adaptive system with slowly varying conditions.

Food colours:a study of the effects of regulation

In the 1960s the benefits of government regulation of technology were believed to outweigh any costs. But recent studies have claimed that regulation has negative effects on innovation, health and consumer choice. This case study on food colours examines such claims. EFFECTS ON HEALTH were measured by allocating a hazard rating to each colour. The negative list of 1925 removed three harmful colours which were rapidly replaced, so the benefits were short-lived. Had a proposed ban been adopted in the 1860s it would have prevented many years exposure to hazardous mineral colours. The positive list of 1957 reduced the proportion of harmful coal tar dyes from 54% of the total to 20%. Regulations brought a greater reduction in hazard levels than voluntary trade action. Delays in the introduction of a positive list created a significant hazard burden. EFFECTS ON INNOVATION were assessed from patents and discovery dates. Until the 1950s food colours were adopted from textile colours. The major period of innovation for coal tar colours was between 1856 and 1910, finishing well before regulations were made in 1957, so regulations cannot be blamed for the decline. Regulations appear to have spurred the development of at least one new coal tar dye, and many new plant colours, creating a new sector of the dye industry. EFFECTS ON CONSUMER CHOICE were assessed by case studies. Coloured milk, for example, was banned despite its popularity. Regulations have restricted choice, but have removed from the market foods that were nutritionally impoverished and poor value for money. Compositional regulations provided health protection because they reduced total exposure to colours from certain staple foods. Restricting colours to a smaller range of foods would be an effective way of coping with problems of quality and imperfect toxicological knowledge today.

Relational diversity, social integration and individual effectiveness: a social self-regulation perspective

Relational demographers and dissimilarity researchers contend that group members who are dissimilar (vs. similar) to their peers in terms of a given diversity attribute (e.g. demographics, attitudes, values or traits) feel less attached to their work group, experience less satisfying and more conflicted relationships with their colleagues, and consequently are less effective. However, qualitative reviews suggest empirical findings tend to be weak and inconsistent (Chattopadhyay, Tluchowska and George, 2004; Riordan, 2000; Tsui and Gutek, 1999), and that it remains unclear when, how and to what extent such differences (i.e. relational diversity) affect group members social integration (i.e. attachment with their work group, satisfaction and conflicted relationships with their peers) and effectiveness (Riordan, 2000). This absence of meta-analytically derived effect size estimates and the lack of an integrative theoretical framework leave practitioners with inconclusive advice regarding whether the effects elicited by relational diversity are practically relevant, and if so how these should be managed. The current research develops an integrative theoretical framework, which it tests by using meta-analysis techniques and adding two further empirical studies to the literature. The first study reports a meta-analytic integration of the results of 129 tests of the relationship between relational diversity with social integration and individual effectiveness. Using meta-analytic and structural equation modelling techniques, it shows different effects of surface- and deep-level relational diversity on social integration Specifically, low levels of interdependence accentuated the negative effects of surface-level relational diversity on social integration, while high levels of interdependence accentuated the negative effects of deep-level relational diversity on social integration. The second study builds on a social self-regulation framework (Abrams, 1994) and suggests that under high levels of interdependence relational diversity is not one but two things: visibility and separation. Using ethnicity as a prominent example it was proposed that separation has a negative effect on group members effectiveness leading for those high in visibility and low in separation to overall positive additive effects, while to overall negative additive effects for those low in visibility and high in separation. These propositions were sustained in a sample of 621 business students working in 135 ethnically diverse work groups in a business simulation course over a period of 24 weeks. The third study suggests visibility has a positive effect on group members self-monitoring, while separation has a negative effect. The study proposed that high levels of visibility and low levels of separation lead to overall positive additive effects on self-monitoring but overall negative additive effects for those low in visibility and high in separation. Results from four waves of data on 261 business students working in 69 ethnically diverse work groups in a business simulation course held over a period of 24 weeks support these propositions.

Fast pyrolysis and nitrogenolysis of biomass and biogenic residues:production of a sustainable slow release fertiliser

The production of agricultural and horticultural products requires the use of nitrogenous fertiliser that can cause pollution of surface and ground water and has a large carbon footprint as it is mainly produced from fossil fuels. The overall objective of this research project was to investigate fast pyrolysis and in-situ nitrogenolysis of biomass and biogenic residues as an alternative route to produce a sustainable solid slow release fertiliser mitigating the above stated problems. A variety of biomasses and biogenic residues were characterized by proximate analysis, ultimate analysis, thermogravimetric analysis (TGA) and Pyrolysis – Gas chromatography – Mass Spectroscopy (Py–GC–MS) for their potential use as feedstocks using beech wood as a reference material. Beech wood was virtually nitrogen free and therefore suitable as a reference material as added nitrogen can be identified as such while Dried Distillers Grains with Solubles (DDGS) and rape meal had a nitrogen content between 5.5wt.% and 6.1wt.% qualifying them as high nitrogen feedstocks. Fast pyrolysis and in-situ nitrogenolysis experiments were carried out in a continuously fed 1kg/h bubbling fluidized bed reactor at around 500°C quenching the pyrolysis vapours with isoparaffin. In-situ nitrogenolysis experiments were performed by adding ammonia gas to the fast pyrolysis reactor at nominal nitrogen addition rates between 5wt.%C and 20wt.%C based on the dry feedstock’s carbon content basis. Mass balances were established for the processing experiments. The fast pyrolysis and in-situ nitrogenolysis products were characterized by proximate analysis, ultimate analysis and GC– MS. High liquid yields and good mass balance closures of over 92% were obtained. The most suitable nitrogen addition rate for the in-situ nitrogenolysis experiments was determined to be 12wt.%C on dry feedstock carbon content basis. However, only a few nitrogen compounds that were formed during in-situ nitrogenolysis could be identified by GC–MS. A batch reactor process was developed to thermally solidify the fast pyrolysis and in-situ nitrogenolysis liquids of beech wood and Barley DDGS producing a brittle solid product. This was obtained at 150°C with an addition of 2.5wt% char (as catalyst) after a processing time of 1h. The batch reactor was also used for modifying and solidifying fast pyrolysis liquids derived from beech wood by adding urea or ammonium phosphate as post processing nitrogenolysis. The results showed that this type of combined approach was not suitable to produce a slow release fertiliser, because the solid product contained up to 65wt.% of highly water soluble nitrogen compounds that would be released instantly by rain. To complement the processing experiments a comparative study via Py–GC–MS with inert and reactive gas was performed with cellulose, hemicellulose, lignin and beech wood. This revealed that the presence of ammonia gas during analytical pyrolysis did not appear to have any direct impact on the decomposition products of the tested materials. The chromatograms obtained showed almost no differences between inert and ammonia gas experiments indicating that the reaction between ammonia and pyrolysis vapours does not occur instantly. A comparative study via Fourier Transformed Infrared Spectroscopy of solidified fast pyrolysis and in-situ nitrogenolysis products showed that there were some alterations in the spectra obtained. A shift in frequencies indicating C=O stretches typically related to the presence of carboxylic acids to C=O stretches related to amides was observed and no double or triple bonded nitrogen was detected. This indicates that organic acids reacted with ammonia and that no potentially harmful or non-biodegradable triple bonded nitrogen compounds were formed. The impact of solid slow release fertiliser (SRF) derived from pyrolysis and in-situ nitrogenolysis products from beech wood and Barley DDGS on microbial life in soils and plant growth was tested in cooperation with Rothamsted Research. The microbial incubation tests indicated that microbes can thrive on the SRFs produced, although some microbial species seem to have a reduced activity at very high concentrations of beech wood and Barley DDGS derived SRF. The plant tests (pot trials) showed that the application of SRF derived from beech wood and barley DDGS had no negative impact on germination or plant growth of rye grass. The fertilizing effect was proven by the dry matter yields in three harvests after 47 days, 89 days and 131 days. The findings of this research indicate that in general a slow release fertiliser can be produced from biomass and biogenic residues by in-situ nitrogenolysis. Nevertheless the findings also show that additional research is necessary to identify which compounds are formed during this process.

A systematic and mechanistic evaluation of aspartic acid as filler for directly compressed tablets containing trimethoprim and trimethoprim aspartate

The generally accepted paradigm of 'inert' and 'mono functional' excipient in dosage form has been recently challenged with the development of individual excipients capable of exhibiting multiple functions (e.g. binder-disintegrants, surfactant which affect P-gp function). The proposed study has been designed within the realm of multifunctionality and is the first and novel investigation towards evaluation of aspartic acid as a filler and disintegration enhancing agent for the delivery of biopharmaceutical class IV model drug trimethoprim. The study investigated powder characteristics using angle of repose, laser diffractometry and scanning electron microscopy (SEM). The prepared tablets were characterised using Heckel analysis, disintegration time and tensile strength measurements. Although Heckel analysis revealed that both TMP and TMP aspartate salt have high elasticity, the salt form produced a stronger compact which was attributed to the formation of agglomerates. Aspartic acid was found to have high plasticity, but its incorporation into the formulations was found to have a negative impact on the compaction properties of TMP and its salt. Surface morphology investigations showed that mechanical interlocking plays a vital role in binding TMP crystals together during compaction, while the small particle size of TMP aspartate agglomerates was found to have significant impact on the tensile strength of the tablets. The study concluded that aspartic acid can be employed as filler and disintegrant and that compactability within tablets was independent of the surface charge of the excipients.

Surface- and deep-level dissimilarity effects on social integration and individual effectiveness related outcomes in work groups:a meta-analytic integration

Prior research linking demographic (e.g., age, ethnicity/race, gender, and tenure) and underlying psychological (e.g., personality, attitudes, and values) dissimilarity variables to individual group member's work-related outcomes produced mixed and contradictory results. To account for these findings, this study develops a contingency framework and tests it using meta-analytic and structural equation modelling techniques. In line with this framework, results showed different effects of surface-level (i.e., demographic) dissimilarity and deep-level (i.e., underlying psychological) dissimilarity on social integration, and ultimately on individual effectiveness related outcomes (i.e., turnover, task, and contextual performance). Specifically, surface-level dissimilarity had a negative effect on social integration under low but not under high team interdependence. In return, social integration fully mediated the negative relationship between surface-level dissimilarity and individual effectiveness related outcomes under low interdependence. In contrast, deep-level dissimilarity had a negative effect on social integration, which was stronger under high and weaker under low team interdependence. Contrary to our predictions, social integration did not mediate the negative relationship between deep-level dissimilarity and individual effectiveness related outcomes but suppressed positive direct effects of deep-level dissimilarity on individual effectiveness related outcomes. Possible explanations for these counterintuitive findings are discussed. © 2011 The British Psychological Society.

Vetting and barring scheme

This factsheet for CIPD members was last updated in June 2013. Background to the Vetting and Barring Scheme The Vetting and Barring Scheme was introduced on 12 October 2009 following the Soham case which concerned the murder of Holly Wells and Jessica Chapman by Ian Huntley. The Bichard Report into the case made a series of recommendations which were implemented in England, Wales and Northern Ireland by the Safeguarding Vulnerable Groups Act 2006. It was also implemented in Scotland by the Protection of Vulnerable Groups (Scotland) Act 2007. Login or register for a free account to continue reading this factsheet and to learn about: •Background to the Vetting and Barring Scheme •Changes under the Protection of Freedoms Act 2012 •Filtering of of old and minor cautions and convictions •Barred lists •Criminal offences •Action points •Useful contacts •Further reading

An assessment of web-based textbook supplementary material to support student learning

There is an increasing trend by publishers to provide supplementary learning materials with text books in order to improve the learning experience and thus ultimately improve text book sales. This study will aim to establish the use of these materials and their relevance to students in terms of supporting student learning. The materials include multiple choice test banks, animated demonstrations, simulations, quizzes and electronic versions of the text. The study will focus on the extensive library of web-based learning materials available on the ‘WileyPlus’ web platform which accompanies the textbook ‘Operations Management’, 2nd edition authored by A. Greasley and published by John Wiley and Sons Ltd.