DNA methylation, histone modification and the transcription factor dE2F1 in Drosophila

Drosophila melanogaster enthält eine geringe Menge an 5-methyl-Cytosin. Die von mir untersuchte männliche Keimbahn von Drosophila weist jedoch keine nachweisbaren Mengen an DNA-Methylierung auf. Eine künstliche Expression der murinen de novo Methyltransferasen, DNMT3A und DNMT3B1, in den Fliegenhoden, führte nicht zu der erwarteten Methylierungszunahme und hatte keinen Effekt auf die Fruchtbarkeit der Männchen. Auch die gewebespezifische Expression unter der Verwendung des UAS/GAL4-Systems zeigte keine phenotypischen Veränderungen. Hingegen fanden wir auf Protein-Ebene des Chromatins von D. melanogaster und D. hydei spezifische Modifikationsmuster der Histone H3 und H4 in der Keimbahn, wie auch in den somatischen Zellen des Hodenschlauches. Die Modifikationsmuster der beiden Zelltypen unterscheiden sich grundlegend und weichen zudem von dem für Eu- und Heterochromatin erwarteten ab, was auf eine größere Komplexität des „Histon-Codes“ als angenommen hindeutet. Folglich liegt die epigenetische Information in Drosophila wahrscheinlich anstatt auf DNA- auf Protein-Ebene, wodurch Genexpression über die Chromatinstruktur reguliert wird. Es wurde gezeigt, dass der Transkriptionsfaktor E2F, der eine Schlüsselfunktion im Zellzyklus hat, durch unterschiedliche Transkripte offenbar quantitativ reguliert wird. Unsere Nachforschungen ergaben, dass die drei E2F1 Genprodukte in Drosophila neben ihrer Zellspezifität auch in unterschiedlichen Expressionsniveaus auftreten, was die Annahme einer quantitativen Expression unterstützt. Die verschiedenen Funktionen der multiplen Gene in Säugern, könnten so funktionell kompensiert werden. Die durch die Expression dreier dE2F1-Transkripte vermutete Synthese verschiedener Proteine konnte nicht bewiesen werden.

The study of a novel zinc finger gene cluster TZF and a genomic region flanking the histone H 4 replacement gene H 4 r of Drosophila melanogaster

Part I : A zinc finger gene Tzf1 was cloned in the earlier work of the lab by screening a ë-DASH2 cDNA expression library with an anti-Rat SC antibody. A ë-DASH2 genomic DNA library and cosmid lawrist 4 genomic DNA library were screened with the cDNA fragment of Tzf1 to determine the genomic organization of Tzf1. Another putative zinc finger gene Tzf2 was found about 700 bp upstream of Tzf1.RACE experiment was carried out for both genes to establish the whole length cDNA. The cDNA sequences of Tzf and Tzf2 were used to search the Flybase (Version Nov, 2000). They correspond to two genes found in the Flybase, CG4413 and CG4936. The CG4413 transcript seems to be a splicing variant of Tzf transcripts. Another two zinc finger genes Tzf3 and Tzf4 were discovered in silico. They are located 300 bp away from Tzf and Tzf2, and a non-tandem cluster was formed by the four genes. All four genes encode proteins with a very similar modular structure, since they all have five C2H2 type zinc fingers at their c-terminal ends. This is the most compact zinc finger protein gene cluster found in Drosophila melanogaster.Part II: 34,056 bp insert of the cosmid 19G11

Synthesis and surface modification of semiconductor nanocrystals

The last decade has witnessed an exponential growth of activities in the field of nanoscience and nanotechnology worldwide, driven both by the excitement of understanding new science and by the potential hope for applications and economic impacts. The largest activity in this field up to date has been in the synthesis and characterization of new materials consisting of particles with dimensions in the order of a few nanometers, so-called nanocrystalline materials. [1-8] Semiconductor nanomaterials such as III/V or II/VI compound semiconductors exhibit strong quantum confinement behavior in the size range from 1 to 10 nm. Therefore, preparation of high quality semiconductor nanocrystals has been a challenge for synthetic chemists, leading to the recent rapid progress in delivering a wide variety of semiconducting nanomaterials. Semiconductor nanocrystals, also called quantum dots, possess physical properties distinctly different from those of the bulk material. Typically, in the size range from 1 to 10 nm, when the particle size is changed, the band gap between the valence and the conduction band will change, too. In a simple approximation a particle in a box model has been used to describe the phenomenon[9]: at nanoscale dimensions the degenerate energy states of a semiconductor separate into discrete states and the system behaves like one big molecule. The size-dependent transformation of the energy levels of the particles is called “quantum size-effect”. Quantum confinement of both the electron and hole in all three dimensions leads to an increase in the effective bandgap of the material with decreasing crystallite size. Consequently, both the optical absorption and emission of semiconductor nanaocrystals shift to the blue (higher energies) as the size of the particles gets smaller. This color tuning is well documented for CdSe nanocrystals whose absorption and emission covers almost the whole visible spectral range. As particle sizes become smaller the ratio of surface atoms to those in the interior increases, which has a strong impact on particle properties, too. Prominent examples are the low melting point [8] and size/shape dependent pressure resistance [10] of semiconductor nanocrystals. Given the size dependence of particle properties, chemists and material scientists now have the unique opportunity to change the electronic and chemical properties of a material by simply controlling the particle size. In particular, CdSe nanocrystals have been widely investigated. Mainly due to their size-dependent optoelectronic properties [11, 12] and flexible chemical processibility [13], they have played a distinguished role for a number of seminal studies [11, 12, 14, 15]. Potential technical applications have been discussed, too. [8, 16-27] Improvement of the optoelectronic properties of semiconductor nanocrystals is still a prominent research topic. One of the most important approaches is fabricating composite type-I core-shell structures which exhibit improved properties, making them attractive from both a fundamental and a practical point of view. Overcoating of nanocrystallites with higher band gap inorganic materials has been shown to increase the photoluminescence quantum yields by eliminating surface nonradiative recombination sites. [28] Particles passivated with inorganic shells are more robust than nanocrystals covered by organic ligands only and have greater tolerance to processing conditions necessary for incorporation into solid state structures or for other applications. Some examples of core-shell nanocrystals reported earlier include CdS on CdSe [29], CdSe on CdS, [30], ZnS on CdS, [31] ZnS on CdSe[28, 32], ZnSe on CdSe [33] and CdS/HgS/CdS [34]. The characterization and preparation of a new core-shell structure, CdSe nanocrystals overcoated by different shells (CdS, ZnS), is presented in chapter 4. Type-I core-shell structures as mentioned above greatly improve the photoluminescence quantum yield and chemical and photochemical stability of nanocrystals. The emission wavelengths of type-I core/shell nanocrystals typically only shows a small red-shift when compared to the plain core nanocrystals. [30, 31, 35] In contrast to type-I core-shell nanocrystals, only few studies have been conducted on colloidal type-II core/shell structures [36-38] which are characterized by a staggered alignment of conduction and valence bands giving rise to a broad tunability of absorption and emission wavelengths, as was shown for CdTe/CdSe core-shell nanocrystals. [36] The emission of type-II core/shell nanocrystals mainly originates from the radiative recombination of electron-hole pairs across the core-shell interface leading to a long photoluminescence lifetime. Type-II core/shell nanocrystals are promising with respect to photoconduction or photovoltaic applications as has been discussed in the literature.[39] Novel type-II core-shell structures with ZnTe cores are reported in chapter 5. The recent progress in the shape control of semiconductor nanocrystals opens new fields of applications. For instance, rod shaped CdSe nanocrystals can enhance the photo-electro conversion efficiency of photovoltaic cells, [40, 41] and also allow for polarized emission in light emitting diodes. [42, 43] Shape control of anisotropic nanocrystals can be achieved by the use of surfactants, [44, 45] regular or inverse micelles as regulating agents, [46, 47] electrochemical processes, [48] template-assisted [49, 50] and solution-liquid-solution (SLS) growth mechnism. [51-53] Recently, formation of various CdSe nanocrystal shapes has been reported by the groups of Alivisatos [54] and Peng, [55] respectively. Furthermore, it has been reported by the group of Prasad [56] that noble metal nanoparticles can induce anisotropic growth of CdSe nanocrystals at lower temperatures than typically used in other methods for preparing anisotropic CdSe structures. Although several approaches for anisotropic crystal growth have been reported by now, developing new synthetic methods for the shape control of colloidal semiconductor nanocrystals remains an important goal. Accordingly, we have attempted to utilize a crystal phase control approach for the controllable synthesis of colloidal ZnE/CdSe (E = S, Se, Te) heterostructures in a variety of morphologies. The complex heterostructures obtained are presented in chapter 6. The unique optical properties of nanocrystals make them appealing as in vivo and in vitro fluorophores in a variety of biological and chemical investigations, in which traditional fluorescence labels based on organic molecules fall short of providing long-term stability and simultaneous detection of multiple emission colours [References]. The ability to prepare water soluble nanocrystals with high stability and quantum yield has led to promising applications in cellular labeling, [57, 58] deep-tissue imaging, [59, 60] and assay labeling [61, 62]. Furthermore, appropriately solubilized nanocrystals have been used as donors in fluorescence resonance energy transfer (FRET) couples. [63-65] Despite recent progress, much work still needs to be done to achieve reproducible and robust surface functionalization and develop flexible (bio-) conjugation techniques. Based on multi-shell CdSe nanocrystals, several new solubilization and ligand exchange protocols have been developed which are presented in chapter 7. The organization of this thesis is as follows: A short overview describing synthesis and properties of CdSe nanocrystals is given in chapter 2. Chapter 3 is the experimental part providing some background information about the optical and analytical methods used in this thesis. The following chapters report the results of this work: synthesis and characterization of type-I multi-shell and type-II core/shell nanocrystals are described in chapter 4 and chapter 5, respectively. In chapter 6, a high–yield synthesis of various CdSe architectures by crystal phase control is reported. Experiments about surface modification of nanocrystals are described in chapter 7. At last, a short summary of the results is given in chapter 8.

Synthesis, characterization and chemical modification of a cationic polyelectrolyte poly(methylene amine)

Polyamine polymers have attracted attention due to their ability to demonstrate pH dependent cationic nature and presence of highly reactive pendant amino groups. These amino groups make them suitable for a host of applications through cross-linking and derivatization. As a result the end use application of a polyamine is largely driven by the number of amino groups and the way they are attached to the polymer backbone. Thus, this piece of work describes the synthesis and investigation of properties of a novel aliphatic polyamine, poly(methylene amine); that carries maximum number of amino group on its backbone. The target polymer, poly(methylene amine); was synthesized via two major steps viz.1.synthesis of precursor polymers of poly(methylene amine) and 2. Hydrolysis of the precursor polymers to obtain poly(methylene amine). The precursor polymers poly (1,3-diacetylimidazole-2-one)(6) and poly(1,3-diformyldihydroimidazol-2-one)(7) were synthesized via radical polymerization of their respective monomers. The monomers were polymerized in bulk as well as in solution at different reaction conditions. The maximum molecular weights were achieved by polymerizing the monomers in bulk (Mn = 6.5 x 104 g/mol and Mw = 2.13 x 105 g/mol) of 6. The precursor polymers were hydrolyzed under strong reaction conditions in ethanol in presence of NaOH, LiCl at 170°C to yield poly(methylene amine). The process of hydrolysis was monitored by IR spectroscopy. The solution properties of poly(methylene amine) and its hydrochloride were investigated by viscosimetry and light scattering. The reduced viscosity of poly (methylene amine) hydrochloride as a function of polymer concentration demonstrated a behavior typical of cationic polyelectrolyte. With decrease in polymer concentration the reduced viscosity of poly(methylene amine) hydrochloride increased gradually. The dynamic light scattering studies also revealed behaviors of a polyelectrolyte. Poly(methylene amine) was reacted with electrophiles to yield novel materials. While the attachment of alkyl group onto the nitrogen would increase nucleophilicity, it would also impose steric hindrance. As a result the degree of substitution on poly(methylene amine) would be governed by both the factors. Therefore, few model reactions with electrophiles were performed on polvinylamine under similar reaction conditions in order to make a comparative evaluation. It was found that under similar reaction conditions the degree of substitution was higher in case of polyvinylamine in comparison with poly (methylene amine).This shows that the steric hindrance outweighs nucleophilicity while deciding degree of substitution of electrophiles on poly(methylene amine). The modification was further extended to its use as an initiator for ring opening polymerization of benzyloxy protected N-carboxyanhydride of z-Lysine. The resulting polymer had an interesting brush like architecture. The solid state morphology of this polymer was investigated by SAXS. The 2D-WAXS diffractograms revealed hexagonal morphology of peptide segments without formation of alpha helices.

Regulation of Nox4 expression by histone deacetylases in human endothelial cells : involvement of epigenetic mechanisms

Nox4 is a member of the NADPH oxidase family, which represents a major source of reactive oxygen species (ROS) in the vascular wall. Nox4-mediated ROS production mainly depends on the expression levels of the enzyme. The aim of my study was to investigate the mechanisms of Nox4 transcription regulation by histone deacetylases (HDAC). Treatment of human umbilical vein endothelial cells (HUVEC) and HUVEC-derived EA.hy926 cells with the pan-HDAC inhibitor scriptaid led to a marked decrease in Nox4 mRNA expression. A similar down-regulation of Nox4 mRNA expression was observed by siRNA-mediated knockdown of HDAC3. HDAC inhibition in endothelial cells was associated with enhanced histone acetylation, increased chromatin accessibility in the human Nox4 promoter region, with no significant changes in DNA methylation. In addition, the present study provided evidence that c-Jun played an important role in controlling Nox4 transcription. Knockdown of c-Jun with siRNA led to a down-regulation of Nox4 mRNA expression. In response to scriptaid treatment, the binding of c-Jun to the Nox4 promoter region was reduced despite the open chromatin structure. In parallel, the binding of RNA polymerase IIa to the Nox4 promoter was significantly inhibited as well, which may explain the reduction in Nox4 transcription. In conclusion, HDAC inhibition decreases Nox4 transcription in human endothelial cells by preventing the binding of transcription factor(s) and polymerase(s) to the Nox4 promoter, most likely because of a hyperacetylation-mediated steric inhibition. In addition, HDAC inhibition-induced Nox4 downregulation may also involves microRNA-mediated mRNA destabilization, because the effect of the scriptaid could be partially blocked by DICER1 knockdown or by transcription inhibition.

Funktionelle Analyse der onkologisch relevanten Protease Threonin-Aspartase 1

Krebs stellt eine der häufigsten Todesursachen in Europa dar. Grundlage für eine langfristige Verbesserung des Behandlungserfolgs ist ein molekulares Verständnis der Mechanismen, welche zur Krankheitsentstehung beitragen. In diesem Zusammenhang spielen Proteasen nicht nur eine wichtige Rolle, sondern stellen auch bei vielerlei Erkrankungen bereits anerkannte Zielstrukturen derzeitiger Behandlungsstrategien dar. Die Protease Threonin Aspartase 1 (Taspase1) spielt eine entscheidende Rolle bei der Aktivierung von Mixed Lineage Leukemia (MLL)-Fusionsproteinen und somit bei der Entstehung aggressiver Leukämien. Aktuelle Arbeiten unterstreichen zudem die onkologische Relevanz von Taspase1 auch für solide Tumore. Die Kenntnisse über die molekularen Mechanismen und Signalnetzwerke, welche für die (patho)biologischen Funktionen von Taspase1 verantwortlich sind, stellen sich allerdings noch immer als bruchstückhaft dar. Um diese bestehenden Wissenslücken zu schließen, sollten im Rahmen der Arbeit neue Strategien zur Inhibition von Taspase1 erarbeitet und bewertet werden. Zusätzlich sollten neue Einsichten in evolutionären Funktionsmechanismen sowie eine weitergehende Feinregulation von Taspase1 erlangt werden. Zum einen erlaubte die Etablierung und Anwendung eines zellbasierten Taspase1-Testsystem, chemische Verbindungen auf deren inhibitorische Aktivität zu testen. Überraschenderweise belegten solch zelluläre Analysen in Kombination mit in silico-Modellierungen eindeutig, dass ein in der Literatur postulierter Inhibitor in lebenden Tumorzellen keine spezifische Wirksamkeit gegenüber Taspase1 zeigte. Als mögliche Alternative wurden darüber hinaus Ansätze zur genetischen Inhibition evaluiert. Obwohl publizierte Studien Taspase1 als ααββ-Heterodimer beschreiben, konnte durch Überexpression katalytisch inaktiver Mutanten kein trans-dominant negativer Effekt und damit auch keine Inhibition des wildtypischen Enzyms beobachtet werden. Weiterführende zellbiologische und biochemische Analysen belegten erstmalig, dass Taspase1 in lebenden Zellen in der Tat hauptsächlich als Monomer und nicht als Dimer vorliegt. Die Identifizierung evolutionär konservierter bzw. divergenter Funktionsmechanismen lieferte bereits in der Vergangenheit wichtige Hinweise zur Inhibition verschiedenster krebsrelevanter Proteine. Da in Drosophila melanogaster die Existenz und funktionelle Konservierung eines Taspase1-Homologs postuliert wurde, wurde in einem weiteren Teil der vorliegenden Arbeit die evolutionäre Entwicklung der Drosophila Taspase1 (dTaspase1) untersucht. Obwohl Taspase1 als eine evolutionär stark konservierte Protease gilt, konnten wichtige Unterschiede zwischen beiden Orthologen festgestellt werden. Neben einem konservierten autokatalytischen Aktivierungsmechanismus besitzt dTaspase1 verglichen mit dem humanen Enzym eine flexiblere Substraterkennungs-sequenz, was zu einer Vergrößerung des Drosophila-spezifischen Degradoms führt. Diese Ergebnisse zeigen des Weiteren, dass zur Definition und Vorhersage des Degradoms nicht nur proteomische sondern auch zellbiologische und bioinformatische Untersuchungen geeignet und notwendig sind. Interessanterweise ist die differentielle Regulation der dTaspase1-Aktivität zudem auf eine veränderte intrazelluläre Lokalisation zurückzuführen. Das Fehlen von in Vertebraten hochkonservierten aktiven Kernimport- und nukleolären Lokalisationssignalen erklärt, weshalb dTaspase1 weniger effizient nukleäre Substrate prozessiert. Somit scheint die für die humane Taspase1 beschriebene Regulation von Lokalisation und Aktivität über eine Importin-α/NPM1-Achse erst im Laufe der Entwicklung der Vertebraten entstanden zu sein. Es konnte also ein bislang unbekanntes evolutionäres Prinzip identifiziert werden, über welches eine Protease einen Transport- bzw. Lokalisations-basierten Mechanismus zur Feinregulation ihrer Aktivität „von der Fliege zum Menschen“ nutzt. Eine weitere Möglichkeit zur dynamischen Funktionsmodulation bieten post-translationale Modifikationen (PTMs) der Proteinsequenz, zu welcher Phosphorylierung und Acetylierung zählen. Interessanterweise konnte für die humane Taspase1 über den Einsatz unabhängiger Methoden einschließlich massenspektrometrischer Analysen eine Acetylierung durch verschiedene Histon-Acetyltransferasen (HATs) nachgewiesen werden. Diese Modifikation erfolgt reversibel, wobei vor allem die Histon-Deacetylase HDAC1 durch Interaktion mit Taspase1 die Deacetylierung der Protease katalysiert. Während Taspase1 in ihrer aktiven Konformation acetyliert vorliegt, kommt es nach Deacetylierung zu einer Reduktion ihrer enzymatischen Aktivität. Somit scheint die Modulation der Taspase1-Aktivität nicht allein über intra-proteolytische Autoaktivierung, Transport- und Interaktionsmechanismen, sondern zudem durch post-translationale Modifikationen gesteuert zu werden. Zusammenfassend konnten im Rahmen dieser Arbeit entscheidende neue Einblicke in die (patho)biologische Funktion und Feinregulation der Taspase1 gewonnen werden. Diese Ergebnisse stellen nicht nur einen wichtigen Schritt in Richtung eines verbesserten Verständnis der „Taspase1-Biologie“, sondern auch zur erfolgreichen Inhibition und Bewertung der krebsrelevanten Funktion dieser Protease dar.