Application of FTIR microscopy to cultural heritage materials

Research in art conservation has been developed from the early 1950s, giving a significant contribution to the conservation-restoration of cultural heritage artefacts. In fact, only through a profound knowledge about the nature and conditions of constituent materials, suitable decisions on the conservation and restoration measures can thus be adopted and preservation practices enhanced. The study of ancient artworks is particularly challenging as they can be considered as heterogeneous and multilayered systems where numerous interactions between the different components as well as degradation and ageing phenomena take place. However, difficulties to physically separate the different layers due to their thickness (1-200 µm) can result in the inaccurate attribution of the identified compounds to a specific layer. Therefore, details can only be analysed when the sample preparation method leaves the layer structure intact, as for example the preparation of embedding cross sections in synthetic resins. Hence, spatially resolved analytical techniques are required not only to exactly characterize the nature of the compounds but also to obtain precise chemical and physical information about ongoing changes. This thesis focuses on the application of FTIR microspectroscopic techniques for cultural heritage materials. The first section is aimed at introducing the use of FTIR microscopy in conservation science with a particular attention to the sampling criteria and sample preparation methods. The second section is aimed at evaluating and validating the use of different FTIR microscopic analytical methods applied to the study of different art conservation issues which may be encountered dealing with cultural heritage artefacts: the characterisation of the artistic execution technique (chapter II-1), the studies on degradation phenomena (chapter II-2) and finally the evaluation of protective treatments (chapter II-3). The third and last section is divided into three chapters which underline recent developments in FTIR spectroscopy for the characterisation of paint cross sections and in particular thin organic layers: a newly developed preparation method with embedding systems in infrared transparent salts (chapter III-1), the new opportunities offered by macro-ATR imaging spectroscopy (chapter III-2) and the possibilities achieved with the different FTIR microspectroscopic techniques nowadays available (chapter III-3). In chapter II-1, FTIR microspectroscopy as molecular analysis, is presented in an integrated approach with other analytical techniques. The proposed sequence is optimized in function of the limited quantity of sample available and this methodology permits to identify the painting materials and characterise the adopted execution technique and state of conservation. Chapter II-2 describes the characterisation of the degradation products with FTIR microscopy since the investigation on the ageing processes encountered in old artefacts represents one of the most important issues in conservation research. Metal carboxylates resulting from the interaction between pigments and binding media are characterized using synthesised metal palmitates and their production is detected on copper-, zinc-, manganese- and lead- (associated with lead carbonate) based pigments dispersed either in oil or egg tempera. Moreover, significant effects seem to be obtained with iron and cobalt (acceleration of the triglycerides hydrolysis). For the first time on sienna and umber paints, manganese carboxylates are also observed. Finally in chapter II-3, FTIR microscopy is combined with further elemental analyses to characterise and estimate the performances and stability of newly developed treatments, which should better fit conservation-restoration problems. In the second part, in chapter III-1, an innovative embedding system in potassium bromide is reported focusing on the characterisation and localisation of organic substances in cross sections. Not only the identification but also the distribution of proteinaceous, lipidic or resinaceous materials, are evidenced directly on different paint cross sections, especially in thin layers of the order of 10 µm. Chapter III-2 describes the use of a conventional diamond ATR accessory coupled with a focal plane array to obtain chemical images of multi-layered paint cross sections. A rapid and simple identification of the different compounds is achieved without the use of any infrared microscope objectives. Finally, the latest FTIR techniques available are highlighted in chapter III-3 in a comparative study for the characterisation of paint cross sections. Results in terms of spatial resolution, data quality and chemical information obtained are presented and in particular, a new FTIR microscope equipped with a linear array detector, which permits reducing the spatial resolution limit to approximately 5 µm, provides very promising results and may represent a good alternative to either mapping or imaging systems.

Trasmission and Reflection (ATR)Far-Infrared Spectroscopy Applied in the Analysis of Cultural Heritage Materials

FIR spectroscopy is an alternative way of collecting spectra of many inorganic pigments and corrosion products found on art objects, which is not normally observed in the MIR region. Most FIR spectra are traditionally collected in transmission mode but as a real novelty it is now also possible to record FIR spectra in ATR (Attenuated Total Reflectance) mode. In FIR transmission we employ polyethylene (PE) for preparation of pellets by embedding the sample in PE. Unfortunately, the preparation requires heating of the PE in order to produces at transparent pellet. This will affect compounds with low melting points, especially those with structurally incorporated water. Another option in FIR transmission is the use of thin films. We test the use of polyethylene thin film (PETF), both commercial and laboratory-made PETF. ATR collection of samples is possible in both the MIR and FIR region on solid, powdery or liquid samples. Changing from the MIR to the FIR region is easy as it simply requires the change of detector and beamsplitter (which can be performed within a few minutes). No preparation of the sample is necessary, which is a huge advantage over the PE transmission method. The most obvious difference, when comparing transmission with ATR, is the distortion of band shape (which appears asymmetrical in the lower wavenumber region) and intensity differences. However, the biggest difference can be the shift of strong absorbing bands moving to lower wavenumbers in ATR mode. The sometimes huge band shift necessitates the collection of standard library spectra in both FIR transmission and ATR modes, provided these two methods of collecting are to be employed for analyses of unknown samples. Standard samples of 150 pigment and corrosion compounds are thus collected in both FIR transmission and ATR mode in order to build up a digital library of spectra for comparison with unknown samples. XRD, XRF and Raman spectroscopy assists us in confirming the purity or impurity of our standard samples. 24 didactic test tables, with known pigment and binder painted on the surface of a limestone tablet, are used for testing the established library and different ways of collecting in ATR and transmission mode. In ATR, micro samples are scratched from the surface and examined in both the MIR and FIR region. Additionally, direct surface contact of the didactic tablets with the ATR crystal are tested together with water enhanced surface contact. In FIR transmission we compare the powder from our test tablet on the laboratory PETF and embedded in PE. We also compare the PE pellets collected using a 4x beam condenser, focusing the IR beam area from 8 mm to 2 mm. A few samples collected from a mural painting in a Nepalese temple, corrosion products collected from archaeological Chinese bronze objects and samples from a mural paintings in an Italian abbey, are examined by ATR or transmission spectroscopy.

Entomological monitoring in the cultural heritage facilities as prerequisite for a successful IPM programme

The European Committee for Standardization is working on a standard for the application of IPM (Integrated Pest Management) in museums and cultural heritage facilities. Since one of the aims of this research was to verify the approach against pests adopted in Italian conservation facilities, a survey was conducted. The results show that for the Italian museums, archives, libraries and historical houses pests are a problem, but IPM is unknown and prevention programmes to avoid damages caused by them, are not applied. In the most of cases pests problems are solved only when the risk is high and damages are visible. Also entomological monitoring, which represents a crucial part of IPM and could be very useful, is not included among the ordinary prevention activities. In addition, at present, the scientific researches on entomological traps, whether light or pheromones, for “cultural heritage pests” is extremely poor and only recently the behaviour and/or the physiology of the insects “of museums” have been investigated. For these reasons, tests to increase the traps using are performed. In particular, S. paniceum behaviour towards different attraction systems was investigated and the results indicate that the light traps efficiency could be improved using specific wavelengths and light sources.

Multi-pollutants impact on modern cement built heritage

It is well known that the deposition of gaseous pollutants and aerosols plays a major role in causing the deterioration of monuments and built cultural heritage in European cities. Despite of many studies dedicated to the environmental damage of cultural heritage, in case of cement mortars, commonly used in the 20th century architecture, the deterioration due to air multipollutants impact, especially the formation of black crusts, is still not well explored making this issue a challenging area of research. This work centers on cement mortars – environment interactions, focusing on the diagnosis of the damage on the modern built heritage due to air multi-pollutants. For this purpose three sites, exposed to different urban areas in Europe, were selected for sampling and subsequent laboratory analyses: Centennial Hall, Wroclaw (Poland), Chiesa dell'Autostrada del Sole, Florence (Italy), Casa Galleria Vichi, Florence (Italy). The sampling sessions were performed taking into account the height from the ground level and protection from rain run off (sheltered, partly sheltered and exposed areas). The complete characterization of collected damage layer and underlying materials was performed using a range of analytical techniques: optical and scanning electron microscopy, X ray diffractometry, differential and gravimetric thermal analysis, ion chromatography, flash combustion/gas chromatographic analysis, inductively coupled plasma-optical emission spectrometer. The data were elaborated using statistical methods (i.e. principal components analyses) and enrichment factor for cement mortars was calculated for the first time. The results obtained from the experimental activity performed on the damage layers indicate that gypsum, due to the deposition of atmospheric sulphur compounds, is the main damage product at surfaces sheltered from rain run-off at Centennial Hall and Casa Galleria Vichi. By contrast, gypsum has not been identified in the samples collected at Chiesa dell'Autostrada del Sole. This is connected to the restoration works, particularly surface cleaning, regularly performed for the maintenance of the building. Moreover, the results obtained demonstrated the correlation between the location of the building and the composition of the damage layer: Centennial Hall is mainly undergoing to the impact of pollutants emitted from the close coal power stations, whilst Casa Galleria Vichi is principally affected by pollutants from vehicular exhaust in front of the building.

Context detection and abstraction in smart environments

Context-aware computing is currently considered the most promising approach to overcome information overload and to speed up access to relevant information and services. Context-awareness may be derived from many sources, including user profile and preferences, network information, sensor analysis; usually context-awareness relies on the ability of computing devices to interact with the physical world, i.e. with the natural and artificial objects hosted within the "environment”. Ideally, context-aware applications should not be intrusive and should be able to react according to user’s context, with minimum user effort. Context is an application dependent multidimensional space and the location is an important part of it since the very beginning. Location can be used to guide applications, in providing information or functions that are most appropriate for a specific position. Hence location systems play a crucial role. There are several technologies and systems for computing location to a vary degree of accuracy and tailored for specific space model, i.e. indoors or outdoors, structured spaces or unstructured spaces. The research challenge faced by this thesis is related to pedestrian positioning in heterogeneous environments. Particularly, the focus will be on pedestrian identification, localization, orientation and activity recognition. This research was mainly carried out within the “mobile and ambient systems” workgroup of EPOCH, a 6FP NoE on the application of ICT to Cultural Heritage. Therefore applications in Cultural Heritage sites were the main target of the context-aware services discussed. Cultural Heritage sites are considered significant test-beds in Context-aware computing for many reasons. For example building a smart environment in museums or in protected sites is a challenging task, because localization and tracking are usually based on technologies that are difficult to hide or harmonize within the environment. Therefore it is expected that the experience made with this research may be useful also in domains other than Cultural Heritage. This work presents three different approaches to the pedestrian identification, positioning and tracking: Pedestrian navigation by means of a wearable inertial sensing platform assisted by the vision based tracking system for initial settings an real-time calibration; Pedestrian navigation by means of a wearable inertial sensing platform augmented with GPS measurements; Pedestrian identification and tracking, combining the vision based tracking system with WiFi localization. The proposed localization systems have been mainly used to enhance Cultural Heritage applications in providing information and services depending on the user’s actual context, in particular depending on the user’s location.

Studio della maturazione di formaggi pecorino stagionati in stabilimento e in grotta

Aims: Ripening evaluation of two different Pecorino cheese varieties ripened according either to a traditional method in plant and in cave. Different ripening features have been analyzed in order to evaluate the cave as possible ripening environment with the aim of obtaining a peculiar product which could also establish an added value to the cultural heritage of the local place in which it has been originally manufactured. Methods and Results: Chemical-physical features of Pecorino cheese have been initially analyzed into two different ripening environments and experimentations, among which: pH, weight reduction and subsequent water activity. Furthermore, the microbial composition has been characterized in relationship with the two different ripening environments, undertaking a variety of microbial groups, such as: lactic bacteria, staphylococci, yeasts, lactococci, enterobacteria, enterococci. Besides, an additional analysis for the in-cave adaptability evaluation has been the identification of biogenic amines inside the Pecorino cheese (2-phenilethylamine, putrescine, cadaverine, hystidine, tyramine, spermine and spermidine). Further analysis were undertaken in order to track the lipid profile evolution, reporting the concentration of the cheese free fatty acids in object, in relation with ripening time, environment and production. In order to analyse the flavour compounds present in Pecorino cheese, the SPME-GC-MS technique has been widely employed. As a result, it is confirmed the trend showed by the short-chain free fatty acids, that is to say the fatty acids which are mostly involved in conveying a stronger flavor to the cheese. With the purpose of assessing the protheolytic patterns of the above-mentioned Pecorino cheese in the two different ripening environments and testing methods, the technique SDS-PAGE has been employed into the cheese insoluble fraction, whereas the SDS-PAGE technique has been carried out into the cheese soluble portion. Furthermore, different isolated belonging to various microbial groups have been genotypically characterized though the ITS-PCR technique with the aim to identify the membership species. With reference to lactic bacillus the characterized species are: Lactobacillus brevis, Lactobacillus curvatus and Lactobacillus paraplantarum. With reference to lactococci the predominant species is Lactococcus lactis, coming from the employed starter used in the cheese manufacturing. With reference to enterococcus, the predominant species are Enterococcus faecium and Enterococcus faecalis. Moreover, Streptococcus termophilus and Streptococcus macedonicus have been identified too. For staphylococci the identified species are Staphyilococcus equorum, Staphylococcus saprophyfiticus and Staphylococcus xylosus. Finally, a sensorial analysis has been undertaken through on one side a consumer test made by inexperienced consumers, and on the other side through a panel test achieved by expert consumers. From such test Pecorino cheese ripened in cave were found to be more pleasant in comparison with Pecorino cheese ripened in plant. Conclusions: The proposed approach and the undertaken analysis showed the cave as preferential ripening environment for Pecorino cheese and for the development of a more palatable product and safer for consumers’ health.

Physical and mineralogical changes of Hungarian monumental stones exposed to different conditions: stone-testing in-situ and under laboratory conditions

The Székesfehérvár Ruin Garden is a unique assemblage of monuments belonging to the cultural heritage of Hungary due to its important role in the Middle Ages as the coronation and burial church of the Kings of the Hungarian Christian Kingdom. It has been nominated for “National Monument” and as a consequence, its protection in the present and future is required. Moreover, it was reconstructed and expanded several times throughout Hungarian history. By a quick overview of the current state of the monument, the presence of several lithotypes can be found among the remained building and decorative stones. Therefore, the research related to the materials is crucial not only for the conservation of that specific monument but also for other historic structures in Central Europe. The current research is divided in three main parts: i) description of lithologies and their provenance, ii) physical properties testing of historic material and iii) durability tests of analogous stones obtained from active quarries. The survey of the National Monument of Székesfehérvár, focuses on the historical importance and the architecture of the monument, the different construction periods, the identification of the different building stones and their distribution in the remaining parts of the monument and it also included provenance analyses. The second one was the in situ and laboratory testing of physical properties of historic material. As a final phase samples were taken from local quarries with similar physical and mineralogical characteristics to the ones used in the monument. The three studied lithologies are: fine oolitic limestone, a coarse oolitic limestone and a red compact limestone. These stones were used for rock mechanical and durability tests under laboratory conditions. The following techniques were used: a) in-situ: Schmidt Hammer Values, moisture content measurements, DRMS, mapping (construction ages, lithotypes, weathering forms) b) laboratory: petrographic analysis, XRD, determination of real density by means of helium pycnometer and bulk density by means of mercury pycnometer, pore size distribution by mercury intrusion porosimetry and by nitrogen adsorption, water absorption, determination of open porosity, DRMS, frost resistance, ultrasonic pulse velocity test, uniaxial compressive strength test and dynamic modulus of elasticity. The results show that initial uniaxial compressive strength is not necessarily a clear indicator of the stone durability. Bedding and other lithological heterogeneities can influence the strength and durability of individual specimens. In addition, long-term behaviour is influenced by exposure conditions, fabric and, especially, the pore size distribution of each sample. Therefore, a statistic evaluation of the results is highly recommended and they should be evaluated in combination with other investigations on internal structure and micro-scale heterogeneities of the material, such as petrographic observation, ultrasound pulse velocity and porosimetry. Laboratory tests used to estimate the durability of natural stone may give a good guidance to its short-term performance but they should not be taken as an ultimate indication of the long-term behaviour of the stone. The interdisciplinary study of the results confirms that stones in the monument show deterioration in terms of mineralogy, fabric and physical properties in comparison with quarried stones. Moreover stone-testing proves compatibility between quarried and historical stones. Good correlation is observed between the non-destructive-techniques and laboratory tests results which allow us to minimize sampling and assessing the condition of the materials. Concluding, this research can contribute to the diagnostic knowledge for further studies that are needed in order to evaluate the effect of recent and future protective measures.

Durability of crystalline monumental stones in terms of their petrophysical characteristics

The durability of stone building materials is an issue of utmost importance in the field of monument conservation. In order to be able to preserve our built cultural heritage, the thorough knowledge of its constituent materials and the understanding of the processes that affect them are indispensable. The main objective of this research was to evaluate the durability of a special stone type, the crystalline stones, in correlation with their intrinsic characteristics, the petrophysical properties. The crystalline stones are differentiated from the cemented stones on the basis of textural features. Their most important specific property is the usually low, fissure-like porosity. Stone types of significant monumental importance, like the marble or granite belong to this group. The selected materials for this investigation, indeed, are a marble (Macael marble, Spain) and a granite (Silvestre Vilachán granite, Spain). In addition, an andesite (Szob andesite, Hungary) also of significant monumental importance was selected. This way a wide range of crystalline rocks is covered in terms of petrogenesis: stones of metamorphic, magmatic and volcanic origin, which can be of importance in terms of mineralogical, petrological or physical characteristics. After the detailed characterization of the petrophysical properties of the selected stones, their durability was assessed by means of artificial ageing. The applied ageing tests were: the salt crystallization, the frost resistance in pure water and in the presence of soluble salts, the salt mist and the action of SO2 in the presence of humidity. The research aimed at the understanding of the mechanisms of each weathering process and at finding the petrophysical properties most decisive in the degradation of these materials. Among the several weathering mechanisms, the most important ones were found to be the physical stress due to crystallization pressure of both salt and ice, the thermal fatigue due to cyclic temperature changes and the chemical reactions (mostly the acidic attack) between the mineral phases and the external fluids. The properties that fundamentally control the degradation processes, and thus the durability of stones were found to be: the mineralogical and chemical composition; the hydraulic properties especially the water uptake, the permeability and the drying; the void space structure, especially the void size and aperture size distribution and the connectivity of the porous space; and the thermal and mechanical properties. Because of the complexity of the processes and the high number of determining properties, no mechanisms or characteristics could be identified as typical for crystalline stones. The durability or alterability of each stone type must be assessed according to its properties and not according to the textural or petrophysical classification they belong to. Finally, a critical review of standardized methods is presented, based on which an attempt was made for recommendations of the most adequate methodology for the characterization and durability assessment of crystalline stones.

Architectures for Context Aware Services in Smart Environments

This thesis deals with Context Aware Services, Smart Environments, Context Management and solutions for Devices and Service Interoperability. Multi-vendor devices offer an increasing number of services and end-user applications that base their value on the ability to exploit the information originating from the surrounding environment by means of an increasing number of embedded sensors, e.g. GPS, compass, RFID readers, cameras and so on. However, usually such devices are not able to exchange information because of the lack of a shared data storage and common information exchange methods. A large number of standards and domain specific building blocks are available and are heavily used in today's products. However, the use of these solutions based on ready-to-use modules is not without problems. The integration and cooperation of different kinds of modules can be daunting because of growing complexity and dependency. In this scenarios it might be interesting to have an infrastructure that makes the coexistence of multi-vendor devices easy, while enabling low cost development and smooth access to services. This sort of technologies glue should reduce both software and hardware integration costs by removing the trouble of interoperability. The result should also lead to faster and simplified design, development and, deployment of cross-domain applications. This thesis is mainly focused on SW architectures supporting context aware service providers especially on the following subjects: - user preferences service adaptation - context management - content management - information interoperability - multivendor device interoperability - communication and connectivity interoperability Experimental activities were carried out in several domains including Cultural Heritage, indoor and personal smart spaces – all of which are considered significant test-beds in Context Aware Computing. The work evolved within european and national projects: on the europen side, I carried out my research activity within EPOCH, the FP6 Network of Excellence on “Processing Open Cultural Heritage” and within SOFIA, a project of the ARTEMIS JU on embedded systems. I worked in cooperation with several international establishments, including the University of Kent, VTT (the Technical Reserarch Center of Finland) and Eurotech. On the national side I contributed to a one-to-one research contract between ARCES and Telecom Italia. The first part of the thesis is focused on problem statement and related work and addresses interoperability issues and related architecture components. The second part is focused on specific architectures and frameworks: - MobiComp: a context management framework that I used in cultural heritage applications - CAB: a context, preference and profile based application broker which I designed within EPOCH Network of Excellence - M3: "Semantic Web based" information sharing infrastructure for smart spaces designed by Nokia within the European project SOFIA - NoTa: a service and transport independent connectivity framework - OSGi: the well known Java based service support framework The final section is dedicated to the middleware, the tools and, the SW agents developed during my Doctorate time to support context-aware services in smart environments.

L'Occidente di Elisée Reclus: l'invenzione dell'Europa nella Nouvelle Géographie Universelle (1876-1894)

La Nouvelle Géographie Universelle di Élisée Reclus relativizza e problematizza il ruolo dell’Europa e il suo peso nello scacchiere mondiale, restando tuttavia in equilibrio fra, da una parte, la critica delle pratiche coloniali e dall’altra la fiducia nei confronti della tradizione culturale proveniente dall’antica Grecia e dal secolo de Lumi destinata, nella visione evoluzionista dell’autore, a spargere negli altri continenti i germi del pensiero socialista e anarchico. In questo lavoro si cerca di chiarire questa rappresentazione dei concetti di Europa e Occidente in tre passaggi successivi. Dapprima, la ricostruzione della genealogia, della teoria e del contesto storico del concetto di geografia universale all’epoca. Poi, la ricostruzione dalle fonti di archivio delle reti scientifiche di respiro europeo che sono state alla base di quest’opera, indispensabile per poterne comprendere il significato politico nel contesto dell’epoca. Infine, l’indagine sul testo per ricostruire ruolo, caratteri e suddivisione dell’Europa, che si rivela, nonostante la serrata critica del suo ruolo colonizzatore, come il privilegiato laboratorio individuato dai “geografi anarchici” per lo sviluppo delle lotte sociali e per la costruzione, su basi anche geografiche, di una proposta politica federalista e libertaria.

Il linguaggio degli ambienti virtuali culturali: comunicare la storia di Bologna attraverso il progetto Nu.M.E.

The contemporary media landscape is characterized by the emergence of hybrid forms of digital communication that contribute to the ongoing redefinition of our societies cultural context. An incontrovertible consequence of this phenomenon is the new public dimension that characterizes the transmission of historical knowledge in the twenty-first century. Awareness of this new epistemic scenario has led us to reflect on the following methodological questions: what strategies should be created to establish a communication system, based on new technology, that is scientifically rigorous, but at the same time engaging for the visitors of museums and Internet users? How does a comparative analysis of ancient documentary sources form a solid base of information for the virtual reconstruction of thirteenth century Bologna in the Metaverse? What benefits can the phenomenon of cross-mediality give to the virtual heritage? The implementation of a new version of the Nu.M.E. project allowed for answering many of these instances. The investigation carried out between 2008 and 2010 has shown that, indeed, real-time 3D graphics and collaborative virtual environments can be feasible tools for representing philologically the urban medieval landscape and for communicating properly validated historical data to the general public. This research is focused on the study and implementation of a pipeline that permits mass communication of historical information about an area of vital importance in late medieval Bologna: Piazza di Porta Ravegnana. The originality of the developed project is not limited solely to the methodological dimension of historical research. Adopted technological perspective is an excellent example of innovation that digital technologies can bring to the cultural heritage. The main result of this research is the creation of Nu.ME 2010, a cross-media system of 3D real-time visualization based on some of the most advanced free software and open source technologies available today free of charge.

Pyrolysis-Gas Chromatography-Mass Spectometry and Chemometric Analysis for the Characterization of Complex Matrices

The present PhD thesis was focused on the development and application of chemical methodology (Py-GC-MS) and data-processing method by multivariate data analysis (chemometrics). The chromatographic and mass spectrometric data obtained with this technique are particularly suitable to be interpreted by chemometric methods such as PCA (Principal Component Analysis) as regards data exploration and SIMCA (Soft Independent Models of Class Analogy) for the classification. As a first approach, some issues related to the field of cultural heritage were discussed with a particular attention to the differentiation of binders used in pictorial field. A marker of egg tempera the phosphoric acid esterified, a pyrolysis product of lecithin, was determined using HMDS (hexamethyldisilazane) rather than the TMAH (tetramethylammonium hydroxide) as a derivatizing reagent. The validity of analytical pyrolysis as tool to characterize and classify different types of bacteria was verified. The FAMEs chromatographic profiles represent an important tool for the bacterial identification. Because of the complexity of the chromatograms, it was possible to characterize the bacteria only according to their genus, while the differentiation at the species level has been achieved by means of chemometric analysis. To perform this study, normalized areas peaks relevant to fatty acids were taken into account. Chemometric methods were applied to experimental datasets. The obtained results demonstrate the effectiveness of analytical pyrolysis and chemometric analysis for the rapid characterization of bacterial species. Application to a samples of bacterial (Pseudomonas Mendocina), fungal (Pleorotus ostreatus) and mixed- biofilms was also performed. A comparison with the chromatographic profiles established the possibility to: • Differentiate the bacterial and fungal biofilms according to the (FAMEs) profile. • Characterize the fungal biofilm by means the typical pattern of pyrolytic fragments derived from saccharides present in the cell wall. • Individuate the markers of bacterial and fungal biofilm in the same mixed-biofilm sample.

Contributi della Geomatica nella salvaguardia e gestione dei Beni Culturali

Il territorio italiano presenta una grandissima ricchezza nel campo dei Beni Culturali, sia mobili che immobili; si tratta di un patrimonio di grande importanza che va gestito e tutelato nel migliore dei modi e con strumenti adeguati, anche in relazione ai problemi ad esso legati in termini di manutenzione e di salvaguardia dai fattori di rischio a cui può essere esposto. Per una buona conoscenza del Patrimonio Culturale, è fondamentale un’acquisizione preliminare di informazioni condotte in modo sistematico e unitario, che siano diffuse ed organiche, ma anche utili ad una valutazione preventiva e ad una successiva programmazione degli interventi di restauro di tipo conservativo. In questo ambito, l'impiego delle tecniche e tecnologie geomatiche nel campo dei Beni Culturali, può fornire un valido contributo, che va dalla catalogazione e documentazione del bene culturale al suo controllo e monitoraggio. Oggigiorno il crescente sviluppo di nuove tecnologie digitali, accompagnato dai notevoli passi avanti compiuti dalle discipline della geomatica (in primo luogo topografiche e fotogrammetriche), rende possibile una efficace integrazione tra varie tecniche, favorita anche dalla diffusione di soluzioni per l’interscambio dati e per la comunicazione tra differenti dispositivi. Lo studio oggetto della presente tesi si propone, di approfondire gli aspetti legati all’uso delle tecniche e tecnologie della Geomatica, per mettere in risalto le condizioni di un bene ed il suo stato di degrado. Per la gestione e la salvaguardia di un bene culturale , si presenta il SIT Carta del Rischio che evidenzia le pericolosità legate al patrimonio, e come esse sommate alla vulnerabilità di un singolo bene, contribuiscano all’individuazione del grado di rischio. di approfondire gli aspetti legati all’uso delle tecniche e tecnologie delle Geomatica, per mettere in risalto le condizioni di un bene ed il suo stato di degrado.

La représentation du pathétique masculin dans le roman sentimental européen: une réflexion sur l'imaginaire littéraire

Ce travail est une analyse de la représentation du pathétique masculin dans le roman dit sentimental dans la deuxième moitié du dix-huitième siècle en Europe, ou plutôt dans les littératures anglaise, française, allemande et italienne. La thèse soutenue est celle de la dérivation du pathétique romanesque de l’âge des Lumières des pratiques de prédication religieuse du siècle précédent et donc de la valeur normative du roman sentimental à ses débuts : celui-ci aurait relayé le rôle des manuels de conduite des siècles précédents et se serait posé comme un répertoire d’exempla comportementaux adaptés aux différentes situations de la vie. Nous avons suivi les évolutions historiques du genre à travers l’analyse thématique du motif des larmes masculines. Pour ce faire, nous avons examiné la complexe proxémique de représentation de l’émotion et la diégèse qui en résulte, qui peut être nuancée, selon une terminologie récente, en pathétique attendrissant, sentimental et spectaculaire. Cela a entraîne la prise en compte de diverses formes artistiques, de la peinture au théâtre. La méthodologie utilisé conjugue l’histoire des idées et l’étude des formes de l’imaginaire, le pathétique appartenant au domaine de la philosophie autant qu’à celui de la représentation artistique : le concept glisse au dix-huitième siècle du champ rhétorique et stylistique à une dimension esthétique et anthropologique. Le travail a donc été divisé en trois grandes parties qui analysent les trois dimensions anthropologiques fondamentales : l’imaginaire religieux et l’héritage des anciens, c’est–à-dire le rapport que l’époque établit avec la tradition culturelle qui la précède ; l’imaginaire amoureux, qui se concentre sur les rapports entre les deux sexes et sur la « féminisation » du héros romanesque sentimental ; l’imaginaire familial, qui aborde les conséquences de ce changement dans la représentation de la masculinité au sein de la représentation de la famille et des rapports intergénérationnels.

Il patrimonio culturale per la dinamizzazione dell'economia territoriale: Il riconoscimento dell'indicazione geografica "Vale do Paraiba Fluminense" ad un caffè con identità culturale

Le Indicazioni Geografiche (IG) giocano un ruolo importante nella crescita economica e nello sviluppo territoriale rurale quando una determinata qualità di prodotto, reputazione o altra caratteristica del prodotto siano attribuibili essenzialmente alla sua origine geografica. In questa ricerca si è verificato la possibilità di valorizzare la regione del Brasile denominata Vale do Paraiba Fluminense, soprannominata “Vale do Café” e di mettere in luce le potenzialità del caffè come prodotto di qualità, sostenibile sotto il profilo ambientale e sociale: un vero e proprio patrimonio culturale che può rivelarsi una valida risorsa economica per il territorio. Nella prima fase dell'indagine è stata realizzata la ricerca a tavolino e sul campo fondata sulle fonti bibliografiche; nella seconda fase è stata applicata la Metodologia Partecipativa della FAO per identificare il collegamento dell’area di origine e del prodotto locale ed il suo potenziale di sviluppo con le risorse locali attraverso questionari on line. Nell’analisi qualitativa sono stati intervistati rappresentanti delle differenti categorie di stakeholder per arricchire il quadro sul contesto storico della regione. Infine, nella parte quantitativa sono stati applicati dei questionari ai consumatori di caffè del territorio. A conclusione della ricerca il territorio potrebbe reintrodurre un caffè storico, simbolo della ricchezza e decadenza di quella regione come elemento di potenziale economico locale, sfruttando la parte immateriale delle aziende agricole storiche, rilocalizzando il prodotto nella memoria locale, riavvicinando la popolazione alla sua storia e principalmente sensibilizzandola del valore del nome geografico “Vale do Paraiba Fluminense” o “Vale do Café” relazionata alla storia della regione, e del prodotto caffè che si propone rilanciare a favore del territorio, rilocalizzando il nome geografico.