697 resultados para Resistência


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Foram estudadas 18 progênies na geração F5 do híbrido H 419, provenientes do cruzamento entre o Híbrido de Timor (UFV 445-46) e o Catuaí Amarelo IAC 30 (UFV 2143), 5 progênies na geração F5 do híbrido H 516, proveniente do cruzamento entre o Híbrido de Timor (UFV 446-08) e o Catuaí Amarelo IAC 86 (UFV 2154) e como controle o Catuaí Vermelho IAC 44 ( UFV 2144 ) com e sem controle da ferrugem. em relação a produção de café cereja por planta e ao ataque da ferrugem as progênies H419-3-1-1-14 e a H516-2-1-1-18, foram as que apresentaram maiores produtividades e resistência a ferrugem ( nota 1 ), seguidas da H419-6-3-6-12, porém com resistência parcial à ferrugem. Essas progênies também foram as que apresentaram maior comprimento do ramo plagiotrópico, que influenciou em 37,73% (R²) na produção de café cereja por planta. O comprimento do ramo plagiotrópico, diâmetro do tronco e altura das plantas foram os atributos que mais correlacionaram r= 0.5977, r= 0.3316 e r= 0.2848, respectivamente p< 0.01, com as produtividades dessas progênies, concordando com resultados obtidos por Dhaliwal (1968). em relação a resistência ao fungo Hemileia vastatrix Berk. et Br.,as progênies apresentaram herdabilidade no sentido amplo elevada (h a² = 0,80 entre e h a² = 0,96 entre e dentro das progênies), mostrando variabilidade genética alta para seleção de material resistentes à ferrugem do cafeeiro.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O tripes do prateamento, Enneothrips flavens Moulton, 1941, é considerado a principal praga do amendoim no Brasil, por sua ocorrência generalizada, pelos elevados níveis populacionais e pelos danos causados a cultura. Objetivou-se, com este trabalho, avaliar o efeito do silício sobre a população de E. flavens e sobre a produtividade do amendoinzeiro. Avaliaram-se, semanalmente, 10 folíolos abertos ou semi-abertos no terço superior das plantas do cultivar IAC 886, por parcela. Os tratamentos foram constituídos por: uma aplicação foliar de silício realizada aos 20 dias após a emergência, duas aplicações foliares de silício realizadas aos 20 e 55 dias, e o controle. Uma aplicação de silício proporcionou proteção às plantas de amendoim, reduzindo o número de adultos e ninfas do tripes de E. flavens e aumentou a produtividade da cultura em 31,30% de amendoim em casca e 28,85% em grãos.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Os autores apresentam uma revisão da literatura referente às alternativas de tratamento cirúrgicas e não-cirúrgicas para a Síndrome da Apnéia e Hipopnéia Obstrutiva do Sono (SAHOS) e para a Síndrome da Resistência das Vias Aéreas superiores (SRVAS) com enfoque no princípio de ação e evolução dos aparelhos de avanço mandibular e, em particular, no mecanismo dinâmico de ação do Aparelho Anti-Ronco® (AAR-ITO).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

OBJETIVO: este trabalho propõe um novo sistema de forças ortodônticas que visa eliminar ou diminuir alguns efeitos secundários da mecânica ortodôntica, como as inclinações, extrusões e perdas de ancoragem. Por meio de uma revisão crítica da literatura sobre a biomecânica, e de ilustrações detalhadas dos mecanismos, procura-se apresentar didaticamente o seu conceito e sua proposta de funcionamento. CONCLUSÕES: embora já existam outras tentativas de diminuir efeitos indesejados da mecânica ortodôntica, como o Power-arm de Andrews e a mecânica com arcos segmentados, ainda assim, sua utilização tem se mostrado muito distante de uma unanimidade na prática clínica ortodôntica. O Centrex talvez se mostre como uma forma de melhorar a mecânica ortodôntica pela diminuição de alguns efeitos indesejados.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A harmful and limiting factor regarding culture productivity is soil compaction, a parameter that can be quantified by the resistance of the soil to penetration and highly influenced by water content. These variables present spatial and temporary variability, characteristics which can be determined by the geostatistical technique. In the light of the above, the present work had as its objective the study of spatial variability of soil resistance to penetration (RP) and water content in the soil (U) in soy culture. The RP values at depths of 0,00-0,10; 0,11-0,20 and 0,21-0,30 m varied from 2,9 to 4,28 MPa and are considered harmful to the root development of legumes, although they have not influenced soy productivity which was 3887 kg ha(-1). The medium water content of the soil was between 0,210 and 0,213 kg kg(-1) for the three depths studied. The resistance of the soil to penetration, expressed through semivariograms, presented spatial dependence at all depths, being adjusted to the spherical model at depths of 0,00-0,10m and exponential at depths of 0,110,20 and 0,21-0,30 m. The spatial variability for all studied layers presented a range of about 20m. The water content in the soil did not present spatial dependence for the depths, presenting randomized distribution.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

They were casted pieces using three kinds of alloy (Ni-Cr, Ag-Sn and Cu-Al) with circular and smooth surface. They were cemented to human teeth, on occlusal surface, grounded at dentin level, through three different materials kind (zinc polycarboxylate cement, glassionomer cement and composite). After 24 hours storing, the samples were subjected to the tensile test. The results showed that the samples cemented with composite and the casts made with Ag-Sn alloy had higher bond strength.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The purpose of this study was to compare the enamel/resin/metal bond tensile strength by using human canines, in which castings were bonded. These castings were obtained by Co-Cr or Ni-Cr alloys and showed four types of mechanisms of retention: 50 micrograms aluminum oxide abrasive, electrochemical etch, acrylic beads metal mesh. The castings were bonded utilizing Comspan Opaque and Panavia Ex. The specimens were subjected to tensile forces after 24 hours in an Instron machine. The castings subjected to 50 micrograms aluminum oxide abrasive and bonded utilizing Panavia EX showed the biggest bond tensile strength.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of the present study was to investigate changes in colon wall in rats with fecal peritonitis (Per) associated with sodium diclofenac (SD) by studying breaking strength and tissue collagen concentration. The rats were divided into the following experimental groups: GROUP 1-SD: 60 animals injected intramuscularly with sodium diclofenac at the dose of 2 mg/kg body weight; GROUP 2-Per: 60 animals injected intraperitoneally with a suspension of human feces. Peritonitis was interrupted after six hours of evolution; GROUP 3-Per+SD: 60 animals injected intraperitoneally with a suspension of human feces and receiving SD according to the schedule used for Groups 1 and 2; CONTROL GROUP: 12 animals injected intramuscularly with physiological saline. The animals of Group 1, 2 and 3 were successively sacrificed 2, 4, 7, 14 and 21 days after interruption of peritonitis an/or the beginning of treatment. Under conditions of the experimental model and of the methods used, we conclude that sodium diclofenac, peritonitis and the peritonitis-sodium diclofenac association decrease the breaking strength and the concentration of tissue collagen in the colon segment.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Since 1988 to 1992, a study about susceptibility to antimicrobial drugs of bacterias isolated from hospitalized patients was performed. The compared susceptibility to important drugs (ampicilin, cephalothin, cefoxitin, ceftazidime, ceftriaxone, aztreonam, gentamicin, amikacin, peftoxacin, ciprofloxacin, imipenem, oxacillin and vancomicin) was investigated in 1200 strains (300 of each specie) of the prevalent bacterias: E. coli, Klebsiella pneumoniae, Pseudomonas aeruginosa and S. aureus. Minimal inhibitory concentration (MIC) was determined by agar dilution method, using from 0,05 to 256 mcg of each drug per ml of culture medium (Mueller-Hinton). Ranges of MIC, MIC 50%, MIC 90% and the proportion of resistant strains were determined and permited to know the 4 drugs that were found to be more active against bacterias; the CIM 90% values are: E. coli - aztreonam (0,1 mcg/ml), pefloxacin (0,1), ceftazidime (0,25) and ceftriaxone (0,05); K. pneumoniae - aztreonam (0,25), ceftriaxone (0,25), ceftazidime (0,5) and pefloxacin (2,0); P. aeruginosa - imipenem (4,0), aztreonam (16), ceftazidime (16) and ciprofloxacin (16); S. aureus - vancomicina (1,0), ciprofloxacin (8,0), arnicacina (128) and cephalothin (128 mg/ml). The better in vitro antibacterial activity observed was related to: aztreonam (77-100% of the sensitive strains), ceftazidime (50-99,7%), pefloxacin (73-99,7%), ciprofloxacin(80%), imipenem (93%) and vancomicin (100%).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Cotton genotypes resistance to Alabama argillacea (Huebner, 1818) due to antibiosis has been evaluated in laboratory trials (at 27 ± 2°C, 70 ± 10% relative humidity and 14 hours photoperiod). Six different genetic materials (T 1122-13-1, STO 285 N, JPM 157, T 953-13-4-2, CNPA 9211-21, and CNPA 9211-31) have been tested in a completely randomized experimental design, with ten replications, each one with ten larvae/genotype. Larvae have been supplied with leaves daily. The following variables have been scored: time length of several insect stages (from larvae to adult), average mass of larvae and pupae as well as average larval, pre-pupal and pupal mortality rates. All genotypes have revealed longer overall average time length of stage duration from larvae to adult, as compared to STO 285 N; however, CNPA 9211-31 and CNPA 9211-21 have shown the smallest average mass of pupae along with high frequencies of pre-pupae and larvae to adult mortalities. The results strongly suggest that antibiosis is one of the resistance mechanisms to A. argillacea in that two cotton genotypes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A quite common problem in the recovery of degraded areas in the mineral exploration understands the compaction of the soil due to the intense traffic of machines and earth movement. The most common problem of the compaction of a degraded surface is: increase of the mechanical resistance to the penetration of the rooats, reduction of the aeration, alteration of the water flow and heat. Thus the present work had the basic objective of diagnosing the compaction of a degraded area by mining in a space way, through the mechanical resistance the way penetration to guide a future subsoiling in the place seeking recovery. Through the studies it was concluded that the kriging method in agreement with the space variation allows the division of the area studies in sub areas facilitating a future work to reduce cost and unnecessary interference to the atmosphere. The method was shown quite appropriate and it can be used in diagnosis of the compaction in a degraded area by mining, foreseeing subsoiling need.