Quality of wood and pulp from a clone of Eucalyptus grandis planted at three locations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudos da polpação kraft, branqueamento e refino de eucalyptus grandis x eucalyptus urophylla

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A influência das variáveis do lixamento tubular na qualidade das peças de Eucalyptus grandis

In 2010, the Brazilian forest sector is represented by about 30,000 companies producing US$ 21 billion annually and account for approximately 5% of the gross domestic product (GDP) in the country. The sanding process is highly demanded in various stages of industrialization of the wood, when there is a need for a better quality surface finishing. The objective of this work was to analyze the influence of cutting speed and sandpaper granulometry on both the surface finishing of pieces of Eucalyptus grandis processed through tubular sanding and on the sanding efforts (force and power of sanding). Four cutting speeds were used (19.5, 22.7, 26 and 28.1 m/s), one advance speed (16 m/min) and three sets of sandpaper (80-100, 80-120 and 100-120) being one for chipping and another for finishing, respectively. A central data acquisition system was set up to capture the variables (cutting power, acoustic emission and vibration) in real time. The cutting force was obtained indirectly, through a frequency inverter. The roughness of the parts was measured by a roughness meter before and after sanding. The highest cutting speed used (28.1 m/s) consumed more power and generated more acoustic emission among the four speeds tested. Regarding the vibration, the lower cutting speed (19.5 m/ s) generated the highest vibration in the sander machine. It is concluded that the range of 100-120 sandpapers resulted in values of average roughness (Ra) lower than the other sets of sandpaper used, as it resulted in better surface finishing.

Crescimento, características nutricionais e fisiológicas de progênies de Eucalyptus grandis W. Hill. Ex Maiden sob diferentes doses de fósforo

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Can hydrogen peroxide and quercetin improve production of Eucalyptus grandis x Eucalyptus urophylla?

Vegetative propagation is considered the best choice for the rapid multiplication of plant species, however, rooting may still present difficulties. Substances, such as auxins, phenolic compounds and hydrogen peroxide, are recognized as able to improve this process. The aim of the present work was to determine if hydrogen peroxide in combination with quercetin or indole butyric acid, can modify some characteristics related to rooting and development in cuttings of Eucalyptus grandis x Eucalyptus urophylla. Cuttings were periodically evaluated at 30, 60 and 90 days according to the following criteria: height, diameter and survival percentage. After planting (90 days), a destructive evaluation was performed to determine rooting percentage, average size and number of roots. Polyamines content and polyamine oxidase activity, as biochemical markers of plant development, were determined. No statistically significant differences in height, diameter, survival and rooting percentage, root length and number of roots per cuttings were found. Treatments induced a decrease in putrescine levels and polyamine oxidase activity in roots. For absence of positive responses, the use of these substances as a treatment to improve cutting production is economically unviable.

Variação dimensional de tábuas de Eucalyptus grandis durante alguns níveis de tempo e temperatura de termorretificação

The objective of this study was evaluate the effects of retification® temperatures and times on thickness variation from Eucalyptus grandis timber. Boards from logs of 30-year-old Eucalyptus grandis trees, from São Paulo Forest Institute in Santa Barbara, Brazil, were thermally modified at 180ºC for 2.5 hours, at 200ºC for 3.0 hours and 200ºC for 4.0 hours. The results showed that: (1) the thermally modified wood at 200°C by 3.0 to 4.0 hours showed increased thickness between 0.698 mm and 0.874 mm due to the internal cracks, (2) the thermally modified wood at 180°C by 2.5 hours has a decreased from 0,177 mm in thickness and the absences of internal cracks.

Modelo matemático aplicado na vaporização de toras de Eucalyptus grandis

O objetivo deste estudo é obter um modelo matemático logístico que representa a vaporização de toras de Eucalyptus grandis, em função do diâmetro e do tempo de permanência das toras no tratamento térmico a vapor. Para tanto, foram coletadas toras nas classes diamétricas de 25 a 40 cm de três árvores de E. grandis provenientes do Horto Florestal de Mandurí, SP. Em cada uma das toras foram inseridos três termopares, com profundidades distintas, 1/3 do raio; 2/3 do raio e o terceiro, próximo ao seu centro. Posteriormente, as toras foram vaporizadas a 85ºC e 100% de umidade relativa, até que o último termopar atingisse uma temperatura de 80ºC. Um Datalogger CR10 registrou as temperaturas, no interior do material, durante o tratamento térmico. Conclui-se que o modelo matemático logístico foi bem ajustado, obtido no tratamento térmico com vapor, levando em consideração as três classes de diâmetro e a profundidade máxima de 50 mm de raio, o modelo gerado, apresenta-se uma viabilidade técnica na aplicação do processo de aquecimento de toras com vapor, promovendo um consumo ideal de energia.

Variabilidade genética e alterações morfológicas em progênies de polinização aberta de Eucalyptus grandis sob o efeito do paclobutrazol

The research objective was to study the genetic diversity of morphological traits in Eucalyptus grandis progenies growing under paclobutrazol regulator effects. The progeny trail was set up through design of randomized blocks. The morphological changes occurred before and during the plant flowering were analyzed. The estimation of genetic parameters were for plant height and stem diameter. The paclobutrazol have caused changes on plant development being strong by the beginning and becoming lightening through the evaluations. The coefficients of variation have shown there is higher genetic diversity within than among progenies for the studied traits. Therefore, it can have high efficiency on selection within progenies in the Eucalyptus grandis breeding program.

Aplicação de polímero hidroretentor no desenvolvimento inicial de Eucalyptus grandis

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Estudo comparativo da madeira e polpação de Eucalyptus urophylla e do híbrido E. urophylla x E. grandis em dois modelos silviculturais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Photoacoustics as a tool for the diagnosis of radicular stress: Measurements in eucalyptus seedlings

In reforesting companies (cellulose industry), eucalyptus is usually cultivated in small plastic containers (50 mL). As seedlings remain for about 120 days in these containers-until transplantation-their roots become space restricted, with consequent limitations in water and nutrient absorption. These restrictions may lead to plant stress, decreasing productivity. In this work, we used the photoacoustic technique to evaluate the photosynthetic activity of Eucalyptus grandis, E. urophylla and E. urograndis seedlings subjected to this limited space availability, seeking a correlation with morphological parameters and fluorescence measurements in these seedlings. Photoacoustic, fluorescence, and morphological analysis were conducted every 15 days, from 45 to 120 days after sowing. Fluorescence and photosynthetic rate were evaluated in vivo and in situ, the latter one using the open photoacoustic technique. Data show that root dry matter diminished markedly at 90 and 120 days after sowing; this behavior showed a high correlation with the gas exchange component of the photoacoustic signal, as well as with the fluorescence ratio Fv/Fm. These results indicate that the soil volume of the container becomes insufficient for the roots after 90 days, probably leading to a nutritional deficiency in plants, which explains the decrease observed in the photosynthetic rate of seedlings. (C) 2003 American Institute of Physics.

Consequências da deriva de clomazone e sulfentrazone em clones de E. grandis x E. urophylla

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The position effect of structural Eucalyptus round timber on the flexural modulus of elasticity

A madeira roliça possui grande emprego nas construções civis, desempenhando a função de vigas, colunas, fundações, postes para distribuição de energia elétrica, entre outras, apresentando a vantagem de não ser processada, como é o caso da madeira serrada. O projeto envolvendo elementos roliços requer, além de outras variáveis estruturais, o conhecimento do módulo de elasticidade. No Brasil, os documentos normativos que tratam da determinação das propriedades de rigidez e resistência para peças roliças de madeira estão em vigência há mais de vinte anos sem revisão técnica. A madeira roliça, por geralmente possuir eixo com curvatura não nula, pode apresentar, segundo a posição da peça no ensaio de flexão, valores diferentes do módulo de elasticidade. Este trabalho tem como objetivo analisara influência da posição de peças roliças de madeira de Eucalyptus grandis na determinação do módulo de elasticidade na flexão. O ensaio de flexão utilizado é o de três pontos, sendo cada peça avaliada em duas posições distintas, definidas mediante o giro da seção transversal em torno do eixo. Os resultados encontrados indicam a necessidade do ensaio de flexão em, pelo menos, duas posições distintas da peça.

Physical and mechanical properties of thermally modified wood from E. grandis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of four trap types for ambrosia beetles (Coleoptera, Scolytidae) in Brazilian Eucalyptus stands

Eucalyptus spp. plantations represent >60% of the reforested area in Brazil. Although ambrosia beetle attacks on live trees were at first nonexistent, they have begun to appear with greater frequency. Monitoring for pest insects is a key factor in integrated pest management, and baited traps are one of the most widely used methods for insect population detection and survey. We compared the efficiency of the most widely used trap in Brazil to survey for ambrosia beetles and other Scolytidae, the ESALQ-84 type, with other traditionally employed traps: the multiple funnel (Lindgren trap); drainpipe; and slot (Theyson) traps, in a Eucalyptus grandis Hill ex Maiden stand in Brazil. The ESALQ-84 trap was the most efficient in trapping Hypothenemus eruditus Westwood and Hypothenemus obscurus (F.); the multiple funnel trap caught significantly more Cryptocarenus diadematus Eggers; whereas the slot trap caught more Premnobius cavipennis Eichhoff and Xyleborus affinis Eichhoff than the other traps. The drainpipe trap was the least effective trap overall. When corrected for number of beetles caught per trap surface area, catches were significantly higher on the ESALQ-84 trap for the majority of the species analyzed, probably because of a smaller trap surface area. The slot trap was recommended for it caught overall more beetles of the three most economically important scolytid species in eucalypt plantations in Brazil, P. cavipennis, X. affinis, and X, ferrugineus.