HACCP plan proposal for a typical Brazilian peanut processing company

Peanuts are likely to be infested by fungi with consequent contamination by aflatoxin in post-harvest industries. A hazard analysis critical control point (HACCP) plan is proposed for a typical Brazilian post-harvest industry from raw in-shell reception to the unpeeled peanuts transportation. Codex Alimentarius Commission guidelines were followed, with four critical control points (CCP) for aflatoxin being identified. The process steps with highest probability of aflatoxin occurrence (risk) are the in-shell reception, the dried in-shell storage, and the unpeeled kernel storage. During the storage steps there is a lack of control of air moisture and temperature. Therefore, there is no option but to keep rigid monitoring and control over each CCP, and detour lots with high aflatoxin levels to either oil or seed production. Attempts to correlate the aflatoxin levels with the rainfall showed an irregular trend of the toxin level. (c) 2008 Elsevier Ltd. All rights reserved.

Work and injuries in dancers: Survey of a professional dance company in Brazil

This study examined the daily life and most important physical injuries suffered and reported by the dancers of a professional (contemporary) dance company in S (a) over tilde $o Paulo, Brazil. Through an observational, cross,sectional, retrospective procedure using a questionnaire that collected qualitative and quantitative data, we were able to gather information on 30 dancers who collaborated with the survey. We determined that the injuries considered as most important by dancers were those that prevented dance activity during some months. These injuries occurred mainly during rehearsals (which is the activity occuppying, the most time on the schedule). Articular injuries were the most frequent and mainly involved the knee and ankle. They were related to classical technique, in which most of the company's artists started their dance careers. Medical care usually was sought within 1 day, and the prescribed treatment resolved the problem, but the injury cause was not identified in all cases.

Integration in new product development: Case study in a large Brazilian high-technology company

Proficiency in management activities undertaken in product development processes is regarded as a key competitive advantage for companies, particularly for high-tech industrial firms, which benefit from the important competitiveness factor of launching products with a differentiated technological content. This paper's objective was to identify, through case study, practices for integration between the roles of R & D with others involved in product development in a large Brazilian company of industrial automation. The results suggest some management practices to improve the integration in new products development, such as the use of employees from marketing with knowledge and experience previously gained from R & D activities and uses the heavyweight product manager to solve synchronization problems between product and technology development. © Universidad Alberto Hurtado, Facultad de Economía y Negocios.

Multi-choice mixed integer goal programming optimization for real problems in a sugar and ethanol milling company

Goal Programming (GP) is an important analytical approach devised to solve many realworld problems. The first GP model is known as Weighted Goal Programming (WGP). However, Multi-Choice Aspirations Level (MCAL) problems cannot be solved by current GP techniques. In this paper, we propose a Multi-Choice Mixed Integer Goal Programming model (MCMI-GP) for the aggregate production planning of a Brazilian sugar and ethanol milling company. The MC-MIGP model was based on traditional selection and process methods for the design of lots, representing the production system of sugar, alcohol, molasses and derivatives. The research covers decisions on the agricultural and cutting stages, sugarcane loading and transportation by suppliers and, especially, energy cogeneration decisions; that is, the choice of production process, including storage stages and distribution. The MCMIGP allows decision-makers to set multiple aspiration levels for their problems in which the more/higher, the better and the less/lower, the better in the aspiration levels are addressed. An application of the proposed model for real problems in a Brazilian sugar and ethanol mill was conducted; producing interesting results that are herein reported and commented upon. Also, it was made a comparison between MCMI GP and WGP models using these real cases. © 2013 Elsevier Inc.

Selecting green suppliers based on GSCM practices: Using fuzzy TOPSIS applied to a Brazilian electronics company

Due to an increased awareness and significant environmental pressures from various stakeholders, companies have begun to realize the significance of incorporating green practices into their daily activities. This paper proposes a framework using Fuzzy TOPSIS to select green suppliers for a Brazilian electronics company; our framework is built on the criteria of green supply chain management (GSCM) practices. An empirical analysis is made, and the data are collected from a set of 12 available suppliers. We use a fuzzy TOPSIS approach to rank the suppliers, and the results of the proposed framework are compared with the ranks obtained by both the geometric mean and the graded mean methods of fuzzy TOPSIS methodology. Then a Spearman rank correlation coefficient is used to find the statistical difference between the ranks obtained by the three methods. Finally, a sensitivity analysis has been performed to examine the influence of the preferences given by the decision makers for the chosen GSCM practices on the selection of green suppliers. Results indicate that the four dominant criteria are Commitment of senior management to GSCM; Product designs that reduce, reuse, recycle, or reclaim materials, components, or energy; Compliance with legal environmental requirements and auditing programs; and Product designs that avoid or reduce toxic or hazardous material use. © 2013 Elsevier B.V. All rights reserved.

A Sorocabana Railway Company: a relação de uma empresa ferroviária privada com as diretrizes governamentais (1907-1919)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Standard oil company: um reflexo da industrialização americana

A Standard Oil Company foi resultado da forte industrialização que ocorreu nos Estados Unidos após a Guerra de Secessão. Anterior ao conflito, os americanos estavam divididos entre ser tornarem um país exportador de matérias primas ou serem industrializados. Mesmo que ambas as estruturas econômicas foram aplicadas concomitantemente, trazendo recursos financeiros para a Nação, os estados do Norte acabaram vencendo a guerra e incentivaram a expansão industrial. O reflexo desse processo foi notado pelo empresário J.D. Rockefeller que inicia sua empresa baseada na exploração de petróleo, a Standard Oil Company. Utilizando-se de métodos eficientes, inovadores e eficazes, proporcionou um aumento na produção petrolífera de forma exorbitante, podendo manter altos níveis de lucro, mesmo que a preços razoáveis ao consumidor. O impacto da organização industrial e as estratégias encontradas pelo monopólio marcaram profundamente a economia americana. Mesmo sendo um tema de história econômica, no decorrer deste trabalho utilizaremos aspectos sociológicos, biográficos e estatísticos para compreendermos de que forma a Standard Oil Company representa a essência do espírito capitalista da instituição americana

Relationships between company size, types of production system and supply chain management: evidence from electro-electronics sector in Brazil

Purpose – The purpose of this paper is to investigate how company size and the type of production system affect the adoption of supply chain management (SCM) practices in companies in the electro‐electronics sector in Brazil. Design/methodology/approach – An e‐mail survey of 107 companies associated with the Brazilian Electrical and Electronics Industry Association (ABINEE) was conducted. Statistical techniques were employed to verify the adoption of SCM practices according to the size of the company and its production system. Findings – The major results indicate that the larger the size of the company, the higher the level of adoption of SCM practices, and that the choice of SCM practices depends upon the type of production system implemented. Practical implications – The implications of this study are useful to top management leaders of small and medium‐sized enterprises since the findings enable them to identify the most common practices adopted by either large‐, medium‐ or small‐sized companies in order to benchmark the level of adoption of SCM practices. Production managers can also benefit from this study by identifying the SCM practices that may support certain production systems.

Greening a Brazilian cotton seed processing company: from challenges to strategic opportunities

This paper aims to shed light on a current and important theme that has been gaining increasing importance for governments, society and companies: the greening of agricultural companies in developing countries. The research objective is to classify a Brazilian cotton seed processing company in the evolutionary stages of environmental management: reactive, preventive or proactive. Design/methodology/approach– A case study was conducted in a Brazilian cotton seed processing company.Findings– The main results are: the studied company is positioned in the preventive stage of environmental management; this company is investing in operational green practices; environmental management in this company is motivated by various factors aiming at an increased competitive advantage. Finally, it can be concluded that this company is looking for green opportunities towards the proactive environmental management stage.