Acupuntura: bases científicas e aplicações

A acupuntura visa à terapia e à cura das enfermidades pela aplicação de estímulos através da pele, com a inserção de agulhas em pontos específicos. Essa técnica esteve isolada do mundo ocidental durante milênios, distanciando sua forma de raciocínio e linguagem da cultura ocidental. Isto restringe sua aceitação no Ocidente, sendo considerada mística e sem base científica. Além disso, a prática da acupuntura no Ocidente se depara com deficiências no ensino e difusão científica. Porém, a eficácia dessa terapia levou a Organização Mundial de Saúde a listar enfermidades que podem ser tratadas pela acupuntura e, recentemente, essa técnica foi reconhecida como especialidade médica veterinária no Brasil. A pesquisa da acupuntura reveste-se, portanto, de grande interesse, na medida em que poderá traduzir conhecimentos milenares, contribuindo para sua aceitação e incorporação.

Effect of wounds applied to the bases of herbaceous cuttings on the rooting of four Japanese apricot clones (Prunus mume Sieb. et Zucc.) in an intermittent mist system

The Japanese apricot (Prunus mume Sieb. et Zucc.) is a fruit tree of the Rosaceae family which produces very acid and bitter fruits, highly appreciated by Orientals. In Brazil, this species has been studied as a rootstock for peach and nectarine trees, its main advantage being the reduction in plant vigour, which can favour the production of compact trees and orchard cultural treatments. This study was conducted in the Vegetable Production Department of FCAV/UNESP, Jaboticabal Campus, São Paulo State, Brazil, and the objective was to examine the effect of wounding the herbaceous cutting bases on the rooting of four Japanese apricot clones. The clones were obtained from plants under cultivation in the Instituto Agronomico de Campinas, Brazil, and were identified as Clones 02, 05, 10 and 15. The stock plants, obtained through herbaceous cuttings, were maintained under lath house conditions (50% of natural light). Cuttings 12 cm long with 3 to 5 leaves were collected from these clones and prepared. The experiment was carried out in a completely randomised design with 4 repetitions of 20 cuttings per replication, in a factorial 4 x 2 design, the clone factor having 4 levels (Clones 02, 05, 10 and 15) and the wounding factor at 2 levels of incisions into the cutting base (with and without). All the cuttings were treated with 2000 mg.L-1 of IBA for five seconds. Differences between the clones were observed concerning the rooting percentage, dead cuttings, number and length of roots. The incision (wound) at the base of the herbaceous cuttings of the Japanese apricot increased the number of roots and improved the distribution of these in the damaged tissue but the results were not considered sufficiently beneficial to make the treatment worthwhile.

Bases para a padronização do teste de germinação em três espécies de Solanum L.

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção de matéria seca e absorção de nutrientes pelo milho em razão da saturação por bases e da adubação potássica

O trabalho foi conduzido em condições de casa de vegetação, com o objetivo de avaliar a resposta do milho à adubação potássica e à saturação do solo por bases, na produção de matéria seca e na absorção de nutrientes. O delineamento experimental foi inteiramente casualizado, com quatro repetições, em esquema fatorial 3x2x4, constituindo-se de três solos (Areia Quartzosa, Latossolo Vermelho-Escuro e Latossolo Roxo), dois valores de saturação por bases (40% e 70 %) e quatro teores de K no solo (0,5, 1,5, 3,0 e 6,0 mmol c dm-3). Para a calagem, foi utilizada mistura de carbonato de cálcio + carbonato de magnésio (PRNT = 103,3 %) na proporção de 4:1. A adubação básica constou de 200 mg kg-1 de N, 200 mg kg-1 de P e 5 mg kg-1 de Zn por vaso de 30 L, sendo o N parcelado em 2,48 g (83,7 mg kg-1) na semeadura e o restante em duas coberturas aos 25 e 40 dias após a emergência das plântulas (DAE). As doses de K utilizadas foram de 0, 3,62, 7,24 e 14,48 g de KCl por vaso. A semeadura foi realizada em 4/3/97, utilizando-se o milho cv. Zêneca 8392, mantendo-se uma planta/vaso durante 60 DAE. O K proporciona ganhos de matéria seca até teores de 1,5 mmol c dm-3 no solo. O aumento dos teores de K no solo resultam em queda na concentração de Ca e Mg na matéria seca do milho. A elevação da saturação por bases e respectivo aumento dos teores de Ca e Mg no solo reduzem a absorção de K pelo milho.

Crescimento do milho em função da saturação por bases e da adubação potássica

Os teores de Ca, Mg e K no solo interferem no crescimento e na produção das culturas. No entanto, a relação entre esses nutrientes que proporciona o desenvolvimento adequado das plantas varia entre as espécies vegetais. O presente teve por objetivo estudar o desenvolvimento do milho em função da saturação do solo por bases e adubação potássica. O delineamento experimental foi inteiramente casualizado, com quatro repetições, em esquema fatorial 3x2x4, constituindo-se de três solos (Neossolo Quartzarênico, Latossolo Vermelho e Latossolo Bruno), dois valores de saturação por bases (40 e 70 %) e quatro doses de potássio no solo (0, 60, 120 e 240 mg kg-1). O experimento foi conduzido em casa-de-vegetação, utilizando-se o milho cv. Zêneca 8392 com uma planta por vaso de 30 L. Aos 29, 57 e 127 dias após a emergência das plântulas, efetuaram-se medidas do número de folhas por planta, altura média das plantas, diâmetro basal do colmo e comprimento médio de entrenós. Após a colheita final determinou-se a produção de grãos por planta. O desenvolvimento e a produção de grãos do milho aumentou até a adição de 60 mg kg-1 de K ao solo. O crescimento do milho foi mais rápido no solo mais arenoso, até o florescimento masculino. Solos com maior capacidade de troca catiônica proporcionaram maior comprimento de entrenós. O comprimento médio de entrenós foi inversamente relacionado ao número médio de entrenós por planta, em função do tipo de solo.

Níveis crescentes de saturação por bases e desenvolvimento inicial de teca em um latossolo de textura média

Teak is a forest species of high commercial value, but the little knowledge on the behavior of this species in relation to soil acidity is an important factor that may limit its cultivation. The aim of this study was to evaluate the effect of high base saturation on the soil on the initial development of teak (Tectona grandis L.f.). The experiment was conducted in a greenhouse, in plastic containers with capacity of 50 liters. The experimental design was randomized, with five treatments and four replications. The treatments consisted of: natural saturation of the soil and the other treatments with 20 %, 40 %, 60 % and 80 % of saturation. Correcting the soil favored the growth characteristics of all evaluated plant teak. The liming positively affected the uptake of N, P, K, Ca, Mg, B, Cu and Fe, and the nutritional requirements of the species had the following order: N > Ca > K > Mg > P > S > Fe > Mn > B > Zn > Cu. Base saturations above 70 % showed higher plant development.

Selectivity of the cyclic carbonate formation by fixation of carbon dioxide into epoxides catalyzed by Lewis bases

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bases neurofisiológicas da dependência do tabaco

A maioria dos estudos pré-clínicos e clínicos aponta a nicotina como o principal agente responsável pelo desenvolvimento da dependência ao tabaco. Muitos trabalhos têm demonstrado que as bases neurais da dependência à nicotina são semelhantes àquelas das outras drogas de abuso. A nicotina induz preferência condicionada por lugar e auto-administração e, portanto, atua como reforçador positivo, esse efeito parece ser mediado pelo sistema dopaminérgico mesolímbico. A nicotina também induz à sensibilização comportamental que é provavelmente resultante de alterações da expressão gênica do núcleo acumbens induzidas pela exposição prolongada a essa substância. A suspensão do uso de nicotina resulta em síndrome de abstinência. As evidências indicam que esses sinais e sintomas sejam mediados por receptores colinérgicos nicotínicos centrais e periféricos. Outros neurotransmissores, como por exemplo a serotonina e os peptídeos opióides, também podem estar envolvidos na mediação da dependência e síndrome de abstinência à nicotina. A revisão da literatura mostra a complexidade dos efeitos da nicotina no organismo. A integração entre as abordagens comportamental, neuroquímica e molecular possibilitará a compreensão dos mecanismos neurais da dependência ao tabaco e fornecerá as bases para o desenvolvimento racional de agentes terapêuticos que possam ser utilizados para o tratamento da dependência e síndrome de abstinência ao tabaco.

Acupuntura: histórico, bases teóricas e sua aplicação em Medicina Veterinária

A acupuntura (AP) é uma técnica terapêutica empírica desenvolvida em uma cultura oriental e que utiliza pensamento mágico (linguagem pré-científica) em seu raciocínio. É uma terapia reflexa que utiliza a estimulação de pontos específicos do corpo com objetivo de atingir um efeito terapêutico ou homeostático. A AP preconiza que a saúde é dependente das funções psico-neuro-endócrinas, sob influência do código genético e de fatores extrínsecos como nutrição, hábitos de vida, clima, qualidade do ambiente, entre outros. O presente artigo faz uma breve revisão sobre a filosofia da AP, seus marcos históricos na China e no Ocidente, a história da AP veterinária no Brasil e no mundo. Também aborda a prática da AP, incluindo as formas de diagnóstico, a definição do protocolo de tratamento, os métodos de estimulação dos pontos, o agulhamento de animais, suas indicações, contra-indicações e reações adversas.

Influence of microwave disinfection on the dimensional stability of intact and relined acrylic resin denture bases

Statement of problem. Microwave irradiation has been suggested as a method to disinfect denture bases. However, the effect of microwave heating on the dimensional stability of the relined denture bases is unknown.Purpose. The purpose of this study was to evaluate the dimensional stability of intact and relined acrylic resin denture bases after microwave disinfection.Material and methods. A standard brass cast simulating an edentulous maxillary arch was machined and used to fabricate 2- and 4-mm-thick denture bases (n=200), which were processed with heat-polymerized acrylic resin (Lucitone 550). The 2-mm thick-specimens (n=160) were relined with 2 mm of autopolymerizing resin (Tokuso Rebase Fast, Ufi Gel Hard, Kooliner, or New Truliner). Distances between 5 removable pins on the standard brass cast were measured with a Nikon optical comparator, and the area (mm(2)) formed by the distance between 5 pins was calculated and served as baseline. During fabrication, the pins were transferred to the intaglio surface of the specimens. Differences between the baseline area and those subsequently determined for the specimens were used to calculate the percent dimensional changes. The intact and relined denture bases were divided into 4 groups (n=10) and evaluated after: polymerization (control group P); 1 cycle of microwave disinfection (MW); daily microwave disinfection for 7 days (control group MW7); water storage for 7 days (WS7). Microwave irradiation was performed for 6 minutes at 650 W. Data were analyzed using 2-way ANOVA followed by Tukey's test (alpha=.05).Results. Intact specimens and those relined with Kooliner and New Truliner showed increased shrinkage after 1 (P=.05, .018, and .001, respectively) and 7 (P <.001, .003, and <.001, respectively) cycles of microwave disinfection. With the exception of specimens relined with Kooliner, intact specimens showed greater shrinkage than the relined specimens after 7 cycles of microwave disinfection.Conclusions. Microwave disinfection produced increased shrinkage of intact specimens and those relined with New Truliner and Kooliner.

Influence of thermal and mechanical stresses on the strength of intact and relined denture bases

Statement of problem. Denture bases may become increasingly weaker as a result of thermal stress and flexural cyclic loading. Information regarding this potential problem and its relationship to the denture base reline is limited.Purpose. This study evaluated the influence of thermal and mechanical stresses on the strength of intact and relined denture bases.Material and methods. Twenty-eight microwave-polymerized (Acron MC) intact denture bases were prepared in the shape of a 3-mm-thick maxillary denture. Additionally, fifty-six 2-mm-thick denture bases were relined with 1 mm of autopolymerizing resin (Tokuyama Rebase Fast II or New Truliner) (n = 28). Intact and relined specimens were divided into 4 groups (n = 7) as follows: without stress (control); a mechanical stress at 0.8 Hz for 10,000 cycles; 5000 thermal cycles between 5 degrees C and 55 degrees C; or a combination thermo-mechanical stress. The specimens were vertically loaded in compression with a rounded rod at 5 mm/min until failure, using a universal testing machine. Data on maximum fracture load (N), deflection at fracture (%), and fracture energy (N-mm) were analyzed by 2-way analysis of variance and Student-Newman-Keuls tests (alpha = .05).Results. The strength of the denture bases relined with New Truliner was not significantly affected by any of the experimental conditions, but comparing the control groups, New Truliner exhibited the lowest maximum fracture load values. The maximum fracture load of intact denture bases (P = .002) and those relined with Tokuyama Rebase Fast II (P = .01) showed a significant decrease after thermal stress. Additionally, cyclic loading significantly decreased the maximum fracture load (P < .001), deflection at fracture (P = .025), and fracture energy (P < .001) of intact denture bases and those relined with Tokuyama Rebase (P values of .002, .039, and .001, respectively).Conclusion. Thermal and mechanical stresses exert deleterious effects on the strength of intact and/or relined denture bases, which vary according to the relining material used.

Effect of disinfection by microwave irradiation on the strength of intact and relined denture bases and the water sorption and solubility of denture base and reline materials

This study evaluated the influence of microwave disinfection on the strength of intact and relined denture bases. Water sorption and solubility were also evaluated. A heat-polymerized acrylic resin (Lucitone 550) was used to construct 4-mm-thick (n = 40) and 2-mm-thick (n = 160) denture bases. Denture bases (2mm) were relined with an autopolymerizing resin (Tokuso Rebase Fast, Ufi Gel Hard, Kooliner, or New Truliner). Specimens were divided into four groups (n = 10): without treatment, one or seven cycles of microwave disinfection (650 W for 6 min), and water storage at 37 degrees C for 7 days. Specimens were vertically loaded (5 mm/min) until failure. Disc-shaped specimens (50 min x 0.5 mm) were fabricated (n = 10) to evaluate water sorption and solubility. Data on maximum fracture load (N), deflection (%), and solubility (%) were analyzed by two-way analysis of variance and Student-Newman-Keuls tests (alpha = 0.05). One cycle of microwave disinfection decreased the deflection at fracture and fracture energy of Tokuso Rebase Fast and New Truliner specimens. The strength of denture bases microwaved daily for 7 days was similar to the strength of those immersed in water for 7 days. Microwave disinfection increased the water sorption of all materials and affected the solubility of the reline materials. (C) 2007 Wiley Periodicals, Inc.

Physicochemical properties of endodontic sealers of different bases

Objective: To assess the setting time (ST), flow (FL), radiopacity (RD), solubility (SB) and dimensional change following setting (DC) of different sealers (AH Plus (R), Polifil, Apexit Plus (R), Sealapex (R), Endomethasone (R) and Endofill (R)) according to American National Standards Institute/American Dental Association (ANSI/ADA) Specification 57. Material and methods: Five samples of each material were used for each test. For ST, cast rings were filled with sealers and tested with a Gillmore needle. For FL, the sealer was placed on a glass plate. After 180 s, another plate with 20 g and a load of 100 g were applied on the material, and the diameters of the discs formed were measured. In RD, circular molds were filled with the sealers, radiographed and analyzed using Digora software. For SB, circular molds were filled with the sealers, a nylon thread was placed inside the material and another glass plate was positioned on the set, pressed and stored at 37 degrees C. Samples were weighed, placed in water, dried and reweighed. The water used for SB was analyzed by atomic absorption spectrometry. For DC, circular molds were filled with the sealers, covered by glass plates and stored at 37 degrees C. Samples were measured and stored in water for 30 days. After this period, they were dryed and measured again. Results: Regarding ST, AH Plus (R), Apexit (R) and Endofil (R) sealers are in accordance with ANSI/ADA standards. Endomethasone's manufacturer did not mention the ST; Polifil is an experimental sealer and Sealapex (R) did not set. Considering RD, SB and DC, all sealers were in accordance with ANSI/ADA. The spectrometric analysis showed that a significant amount of K+ and Zn2(+) ions was released from Apexit Plus (R) and Endofill (R), respectively. Conclusion: Except for DC, all other physicochemical properties of the tested sealers conformed to ANSI/ADA requirements.

A systematic study of transfection efficiency and cytotoxicity in HeLa cells using iron oxide nanoparticles prepared with organic and inorganic bases

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)