Drying kinetics of tomato by using electric resistance and heat pump dryers

Drying kinetics of tomato was studied by using heat pump dryer (HPD) and electric resistance dryers with parallel and crossed airflow. The performance of both systems was evaluated and compared and the influence of temperature, air velocity, and tomato type on the drying kinetics was analyzed. The use of HPD showed to be adequate in the drying process of tomatoes, mainly in relation to the conversion rate of electric energy into thermal energy. The heat pump effective coefficient of performance (COPHT,EF) was between 2.56 and 2.68, with an energy economy of about 40% when compared to the drying system with electric resistance. The Page model could be used to predict drying time of tomato and statistical analysis showed that the model parameters were mainly affected by drying temperature.

Infestation of Bemisia tabaci (Genn.) biotype B (Hemiptera: Aleyrodidae) and Caliothrips phaseoli (Hood.) (Thysanoptera: Thripidae) in beans genotypes.

The objective of this work was to evaluated the infestion of the whitefly Bemisia tabaci (Genn.) B biotype and thrips Caliothrips phaseoli (Hood) in fifteen beans genotypes in field condition. The genotypes IAPAR 31, Rosinha G2, Jalo precoce, Perola, IAC Harmonia, Gen 99TGR110, Gen 99TG2868, Gen 99TGR3416, Gen 99TG3450, Gen 99TG823, Gen 99TGR609, IAC Jaragua, Gen 95A10061531, Gen 99TGR3114 e Gen 96A1473153V2 was used. The experiment was conducted from May to July 2006. The statistical design was randomized blocks, totalizing 15 treatments and four replications. Evaluation was realized weekly, totalizing seven samplings. The evaluations were accomplished on a weekly basis by counting B. tabaci biotype B eggs and nymphs and nymphs of C. phaseoli in 10 leaflets per plot. The less oviposition genotypes by B. tabaci biotype B were IAC Harmonia, Perola, Gen TG3114 e Gen 95A10061531, while the most oviposited were IAC Jaragua and Gen 99TG3450. The less presence of nymphs of whitefly were observed on Perola and IAC Harmonia and the most at IAC Jaragua. It was observed a negative and non significant linear correlation between average temperature versus number of silverleaf whitefly and temperature versus number of thrips was verified.

Microcystin-producing genotypes from cyanobacteria in Brazilian reservoirs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

INCORPORATION of NEEM LEAVES INTO SOIL TO CONTROL BACTERIAL WILT of TOMATO

The objective of this study was to evaluate the effect of incorporation of neem (Azadirachta indica) leaves into the soil for controlling bacterial wilt of tomato caused by Ralstonia solanacearum. The experiment was conducted in a greenhouse of the State University of Maranhao (Brazil). Dry and fresh neem leaves were incorporated in the soil in different amounts (0, 20, 40, 60, 80 and 100 g) and kept in it for different periods of time (0, 15, 30, 45 and 60 days). After each of these periods, seedlings inoculated with R. solanacearum were transplanted in the amended soil. Results showed positive effects in the disease control by incorporating neem leaves, with a reduction of wilting symptoms up to 100% with dry leaves and 78% with fresh leaves.

An alternative field method for screening soybean genotypes for resistance to Heterodera glycines

The soybean cyst nematode (Heterodera glycines) has become an increasingly severe problem in soybean production areas in Brazil. The development and use of resistant cultivars is the most efficient method of minimizing losses due to this pathogen. Our objective was to test the efficiency of an alternative method for screening soybean genotypes for resistance to H. glycines in field plots. The alternative method was compared to the standard method of sowing the test genotypes in fields found to be infested during the previous crop season. In the alternative method, the test genotypes are sown in the furrow following the uprooting of 45-day-old infected plants. The alternative method resulted in twice the cyst population and fewer escapes, and more consistent results than the standard method. The major advantage of the alternative method is that it permits screening in a more homogeneous distribution of H. glycines in the soil.

Evaluation of antimicrobial activity of extracts of medicinal plants on three tomato phytopathogens

Antimicrobial activity of 45 extracts of medicinal plants were tested on Xanthomonas campestris pv. vesicatoria, Ralstonia solanacearum and Clavibacter michiganense subsp. michiganense. Some assays were done to verify the capability of these plants extrats to show an antibiosis. Five extracts (EAFQ, SM1, SM12, SM16, SA1) shown positive activity. The extract EAFQ expressed bactericide activity on C. michiganense. It suggests the possibility of using these actives substances in natura or as a model to synthesize industrialized products, intendind field utilization.

Fatores que afetam a oviposição de Bemisia tabaci (Genn.) biótipo B (Hemiptera: Aleyrodidae) em tomateiro

The aim of the present work was to determine the oviposition preference of the silverleaf whitefly on tomato (Lycopersicon esculentum). Preferred plant age and leaflet position on the plant were studied and the number of adults per plant necessary for selecting hosts was determined. Bruna VFN hybrid plants at different ages (30-, 45- and 60-days old) were offered to adult whiteflies in free choice test and 30-day old plants in no-choice test. Leaves were collected from upper and lower part of the plant; the leaflets were divided into three categories: basis (those near the steam of plant), middle and apex (terminal leaflet). The 30-day old plants were more preferred for oviposition in free choice test. In the upper part of the plant, whitefly adults preferred to oviposit on the leaflets at the apex and the middle of the leaves. However, in the lower part of the plant, the basal leaflets were preferred in relation to middle and apex. The densities of 100 or 150 adults per tomato plant were considered adequate for genotypes screening, using no-choice test.

Heavy metal nutrients in tomato plants cultivated in soil amended with biosolid composts

The use of biosolids in horticulture could contribute to recycle residues produced by men. This study analyzed concentrations of Cu, Mn and Zn in the compost during fermentation, in the soil amended with the composts and in the tomato plant materials. Five composts were produced using sugar-cane bagasse, biosolid and cattle manure in the proportions: 75-0-25; 75-12.5-12.5; 75-25-0; 50-50- 0 and 0-100-0 (composts with 0; 12.5; 25; 50 and 100% biosolid), respectively. These composts were used in an experiment with 6 treatments (the 5 composts and a control with mineral fertilization) in a design of randomized blocks with a split plot design. The control and the treatment of 0% biosolid received inorganic nitrogen. All the treatments received the same amount of N, P and K. Two tomato plants were cultivated in each 24 L pot, in a greenhouse at the Technology Department of the Faculdade de Ciências Agrárias e Veterinárias of the Universidade Estadual Paulista in Jaboticabal County, São Paulo State, Brazil. The concentrations of Cu, Mn and Zn were evaluated in the compost 7, 27, 57, 97 and 127 days after composting began, in the soil 0 and 164 days after the compost applied, and in the plants. Compost, soil and plant samples were subjected to digestion with HNO3, H 2O2 and HCl and the metals were determined by AAS. There were positive and significant correlations between Mn in the compost and Mn uptake by the plant (0.46 p>0.05), and between Zn in the compost and Zn concentration in the plant (0.78 p>0.05). Cu, Mn and Zn concentrations increased during composting. The biosolid in the compost supplied Cu and Zn to tomato plants, and the cattle manure supplied Mn to the plants.

Yield and fruit size distribution of processing tomato cultivars

The productivity and fruit size distribution of 28 processing tomato cultivars were analyzed to determine the ones with potential for fresh market. The experiment was done in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), in a Haplorthox soil, from June to December. The cultivars H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511 were evaluated. The experimental design was randomized blocks, with four repetitions, and five plants per experimental unit. Fruits harvested from each experimental unit were counted, classified by transversal diameter (large, medium, small, very small and cull) and then weighed. Cultivars AG 72, H 9498, Hypeel 45, RPT 1095 and Curicó yielded more than 70 fruits per plant, on average. The total production per plant of cultivars AG 72, H 9498, Hypeel 45, H 7155, Hypeel 108, Halley, Hitech, RPT 1095, H 9494, H 9036 and Curicó was greater than 4 kg. Considering the weight of large and medium fruits, categories which are important for fresh market, the cultivars H 2710, Botu 13, U 573, Hypeel 45, Yuba, RPT 1294 and Ipa 6 presented values above 50% for production.

Total and harvest-date yield of processing tomato cultivars

The productivity of 28 tomato cultivars was evaluated over three stages of harvest. The study was carried out during from June to December of 1999 in an open field at the experimental area of the Section of Olericulture and Aromatic Medicinal Plants, Department of Crop Production at FCAV-UNESP, Jaboticabal, SP, Brazil. The cultivars studied were H 7155, Hypeel, Andino, U 573, H 9036, IPA 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Pelmeech, Curico, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570, and PSX 37511. The experimental design was a randomized block design with four repetitions, with five plants per plot. Productivity was evaluated at three stages of harvest at 119, 149 and 179 days after seeding. There were no significant differences among the cultivars at the first harvest (119 days). The majority of the cultivars produced their highest yield at the second harvest; the most productive cultivars were Curicó and AG 72, which yielded 4.69 and 4.67 kg/plant, respectively, although they did not differ statistically from the cultivars Hypeel 45 (4.35 kg/plant) and H 9498 (4.16 kg/plant). Yields of the cultivars Andino and H 9494 were evenly distributed between the second and third harvests. At the third harvest, cultivar IPA 6 had the highest yield (2.9 kg/plant) and was statistically different from all other cultivars except H 9036 (2.34 kg). These two cultivars had the most delayed and concentrated maturity, making them suitable for mechanical harvesting, although at a later time. Cultivar AG 72 had the greatest total yield (5.76 kg/plant), but it was not statistically different from cultivars Hypeel 45 (5.43 kg), Curico (4.17 kg), H 9498 (4.83 kg), H 7155 (4.58 kg) and Halley (4.55 kg). All of the cultivars, with the exception of cultivars H 9036, IPA 6, Andino and H 9494 showed in the second harvest concentrated maturity, making it suitable for mechanical harvesting.

Physical-chemical characterization of processing tomato fruit

Fruit of 28 tomato cultivars for industrial processing were characterized to identify cultivars with potential for in natura consumption. The experiment was carried out in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), on a Haplorthox soil during June-December. The cultivars used in this study were: H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511. The experimental design was randomized blocks, replicated four times. Ten fruits per plot were analyzed, evaluating the following characteristics: shape (oblong or round); length and diameter (mm); external and internal coloration; presence of fissures; number of loci; pulp thickness (mm); soluble solids content (Brix) and total acidity. Only cultivars Hypeel 108, AG 72, NK 1570, RPT 1570 had oblong fruit. Cultivars which had pulp thicker than 5.5 mm, a characteristic which is directly related to fruit yield for industrial purposes were: Ipa 6, Andino, U 646, H 9553, RPT 1294 and Hypeel 108. Cultivars Ipa 6 and Andino also presented elevated values for length, diameter and pulp thickness, indicating them as quality material for industry or, alternatively, for in natura market. Among the cultivars which presented better values for acidity (higher or equal to 0.3 g citric acid 100 g-1) were RPT 1095, AG 45, H 9553 and Hypeel 45.