Velocidade de semeadura e profundidade da haste em sistema plantio direto de milho e soja

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Doses, fontes e épocas de aplicação de nitrogênio influenciando teores de clorofila e produtividade do trigo

To achieve high wheat yield, correct management of N fertilization and the use of high yield potential cultivars are necessary. The aim of this study was to evaluate the effects of different application rates and sources of N, applied totally at sowing or in topdressing, on grain yield and yield components of two irrigated wheat cultivars under a no-till system, grown in a Cerrado (Brazilian tropical savanna) region of low altitude. A randomized block design was used in a 5 x 3 x 2 x 2 factorial arrangement with three replications, combining five levels of N (0, 50, 100, 150, and 200 kg ha(-1)), three sources of N (Entec (R), ammonium sulfate, and urea), and two application times (at sowing, near the rows, or in topdressing) in two wheat cultivars (IAC 370 and Embrapa 21). The wheat cultivars had similar grain yields. There was no difference among the sources of N for grain yield and yield components. The N applied totally at sowing did not differ from the traditional application at sowing and in topdressing for production of irrigated wheat in no-tillage. The increase in application rates of N increased the leaf N contents and chlorophyll, plant height, and the number of ears per m(2). Grain yield of the wheat cultivars IAC 370 and Embrapa 21 increased up to the application rates of 134 and 128 kg ha(-1) of N, respectively, regardless of application time and source of N. The positive correlation between chlorophyll leaf content and grain yield in accordance with N fertilization levels indicates that N fertilization in topdressing can be recommended based on SPAD readings of leaf chlorophyll performed at 38 days after wheat plant emergence.

Early growth of common bean cropped over ruzigrass residues

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização de Híbridos Simples Experimentais de Milho (Zea Mays L.)

Pós-graduação em Agronomia - FEIS

Agronomic performance of peach trees grown in subtropical region

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Growth and flowering of five mango cultivar under subtropics conditions of Brazil

The evaluation of the new cultivars adaptation and yield potential of Mangifera indica L. provides tools to assist and improve the mango production in different climates conditions. This study aimed to evaluate the phenological and reproductive development of five mango cultivars (Bourbon, Haden, Palmer, Parwin and Tommy Atkins), on climate conditions in dry land and four production cycles (from 08/2007 to 01/2011), at São Manuel, São Paulo state, Brazil. The variables were total plant height, trunk height, stem diameter and the first insertion diameter, fruits physical characteristics, yield and harvest period, flowering seasonality and morphological characterization of the inflorescences. It was found that the four-year-old plants of Haden cv. reach 4.0 m high and 0.20 m of trunk diameter. Bourbon cultivar had the highest flowering period, from April to October. Tommy Atkins cv. had productivities of 14779.07 kg∙ha−1 in the fourth cycle and the productivity of Bourbon, Haden and Palmer cultivars was alternated.

Manejo e conservação genética In Situ, Acrocomia aculeata (Jacq.) Lodd. Ex Mart. no pontal do Paranapanema

Pós-graduação em Agronomia - FEIS

ASIAN SOYBEAN RUST INTEGRATED MANAGEMENT POTENTIAL: DISEASE SEVERITY, PLANT DEVELOPMENT AND YIELD COMPONENTS, CULTIVAR MG/BR-46 (CONQUISTA)

Soybean rust caused by Phakopsora pachyrhizi Sydow & P. Sydow is one of the major diseases of the soybean crop. The aim of this study was to evaluate the effects of sowing dates, plant populations and reduced doses of fungicides on soybean rust severity and its effects on plant development and yield, cultivar MG/BR46 (Conquista). Field experiments were conducted in the 2009/2010 and 2010/2011 harvests, under natural rust infestation of soybean rust. As from the appearance of the first disease symptoms, also began the fungicide spraying and the disease severity assessments. To understand the nature and extent of the effects of different treatments, a multivariate analysis of factors was applied. For the majority of the agronomic characters and factors, one-third to two-thirds of their variability can be explained by changes in plant populations or by differences in the fungicide treatments, and the remainder, was explained by sowing date variations. The fungicide treatments and sowing dates are determinants in disease severity and its interference on crop productivity. The characters of plant growth are more dependent on plant population variations. Treatments with azoxystrobina + ciproconazol promoted smaller disease severities, reflecting in productivity increase. The plant populations can be reduced up to 160.000 plants ha(-1) without losses in the disease control and the soybean yield. In general, the earliest sowings provided increase in the plant development, although the rust control was less efficient.

Breeding potential of maize composite Isanao VF1 in small spacing in the second growing season

The purpose of this study was to verify the breeding potential of the maize composite Isanao VF1 in the second growing season. One hundred and fifty half-sib progenies were evaluated of spacing of 0.45 m, densities of 57,778 and 80,000 plants ha(-1), in a randomized block design with three replications. Gains of 16.0 and 19.2% were estimated for grain Yield, H. I and 10.5% for prolificacy and 12.3 and 12.9% for ear height, respectively, at 57,778 and 80,000 plants ha(-1). The heritabilities for plant height, ear height and grain yield were 65.2 and 61.3%, 64.3 and 66.9% and 53.5 and 63.3%, respectively, confirming the potential for breeding at both densities. The absence of progeny by density interaction indicates that no further selection programs are necessary. The occurrence of segregation for modifier genes for height suggests stabilizing selection based on ear height.

Performance and carcass characteristics of broiler chickens with different growth potential and submitted to heat stress

In order to evaluate the effects of broiler genotype and of heat exposure on performance, carcass characteristics, and protein and fat accretion, six hundred one-day-old male broilers were randomly assigned in a 2 x 3 factorial arrangement, according to the following factors: genetic group (selected and non-selected broilers) and pair-feeding scheme (Ad(32) - reared under heat stress and fed ad libitum; Ad(23) - reared at thermoneutrality and fed ad libitum; Pf(23) - reared at thermoneutrality and pair fed with Ad(32)), with a total of six treatments with four replicates of 25 birds each. Independent of pair-feeding scheme, selected broilers showed better feed conversion, higher carcass yield, and lower abdominal fat deposition rate. However, as compared to non-selected broilers, they reduced more intensively feed intake when heat exposed, which promoted significant breast-yield decrease, and more pronounced changes on carcass chemical composition. These findings allows concluding that, in both genetic groups, both environmental temperature and feed-intake restriction influence abdominal fat deposition rate and other carcass characteristics; however, the impact of heat exposure on broiler performance is more noticeable on the selected line.

Effects of Silicon and Drought Stress on Tuber Yield and Leaf Biochemical Characteristics in Potato

Silicon has beneficial effects on many crops, mainly under biotic and abiotic stresses. Silicon can affect biochemical, physiological, and photosynthetic processes and, consequently, alleviates drought stress. However, the effects of Si on potato (Solanum tuberosum L.) plants under drought stress are still unknown. The objective of this study was to evaluate the effect of Si supply on some biochemical characteristics and yield of potato tubers, either exposed or not exposed to drought stress. The experiment was conducted in pots containing 50 dm(3) of a Typic Acrortox soil (33% clay, 4% silt, and 63% sand). The treatments consisted of the absence or presence of Si application (0 and 284.4 mg dm(-3)), through soil amelioration with dolomitic lime and Ca and Mg silicate, and in the absence or presence of water deficit (-0.020 MPa and -0.050 MPa soil water potential, respectively), with eight replications. Silicon application and water deficit resulted in the greatest Si concentration in potato leaves. Proline concentrations increased under lower water availability and higher Si availability in the soil, which indicates that Si may be associated with plant osmotic adjustment. Water deficit and Si application decreased total sugars and soluble proteins concentrations in the leaves. Silicon application reduced stalk lodging and increased mean tuber weight and, consequently, tuber yield, especially in the absence of water stress.

Strategy of specification of management areas: rice grain yield as related to soil fertility

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Shikimate Kinase (EC 2.7.1.71) from Mycobacterium tuberculosis: Kinetics and Structural Dynamics of a Potential Molecular Target for Drug Development

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Azteca barbifex Forel (Hymenoptera: Formicidae): potential pest of citrus crops in eastern Amazon

Damage caused by the ant Azteca barbifex (Forel) was identified in orange trees (Citrus sinensis), in Capitão Poço County, Guamá microregion, Pará State. The damage caused by the scraping of stems and branches lead to reduction in yield with subsequent death of the plant. These characteristics indicate A. barbifex as a potential pest of citrus crops in the eastern region of Amazon.

Total secondary-electron yield of metals measured by a dynamic method

The secondary electron emission of dielectrics usually is measured by the pulse method, in which the dielectric is irradiated with short pulses of electrons. Attempts to use a dynamic method, in which the dielectric is irradiated continuously, have failed because the dielectric becomes charged and this charge interferes with the emission process. The dynamic method can, however, be applied to metals where volume charges are prevented. This article reports dynamic measurements of the total secondary emission yield from stainless steel, platinum, and aluminum and compares them with results from the current pulse method. In order to apply the dynamic method to metals a simple but important change in the setup was introduced: a dielectric slab was placed between the electrode and the metallic sample, which permitted the sample surface potential and therefore the energy of the incident electrons to change continuously. Unlike for dielectrics, the emission curves for metals are identical when obtained by the two methods. However, for a sample with deliberately oxidized surfaces the total secondary emission yield is smaller when measured with the dynamic method as compared with the pulse method, just as happens for dielectrics. (C) 2000 American Institute of Physics. [S0021-8979(00)03413-7].