The potential of novel primers and universal adhesives to bond to zirconia

Objectives: To investigate the adhesive potential of novel zirconia primers and universal adhesives to surface-treated zirconia substrates.Methods: Zirconia bars were manufactured (3.0 mm x 3.0 mm x 9.0 mm) and treated as follows: no treatment (C); air abrasion with 35 mu m alumina particles (S); air abrasion with 30 mu m silica particles using one of two systems (Rocatec or SilJet) and; glazing (G). Groups C and S were subsequentially treated with one of the following primers or adhesives: ZP (Z-Prime Plus), AZ (AZ Primer); MP (Monobond Plus); SU (ScotchBond Universal) and; EA (an Experimental Adhesive). Groups Rocatec and SilJet were silanized prior to cementation. Samples form group G were further etched and silanized. Bars were cemented (Multilink) onto bars of a silicate-based ceramic (3.0 mm x 3.0 mm x 9.0 mm) at 90 degrees angle, thermocycled (2.500 cycles, 5-55 degrees C, 30 s dwell time), and tested in tensile strength test. Failure analysis was performed on fractured specimens to measure the bonding area and crack origin.Results: Specimens from group C did not survive thermocycling, while CMP, CSU and CEA groups survived thermocycling but rendered low values of bond strength. All primers presented a better bond performance after air abrasion with Al2O3 particles. SilJet was similar to Rocatec, both presenting the best bond strength results, along with SMP, SSU and CEA. G promoted intermediate bond strength values. Failure mode was predominately adhesive on zirconia surface combined to cohesive of the luting agent.Conclusions: Universal adhesives (MP, SU, EA) may be a considerable alternative for bonding to zirconia, but air abrasion is still previously required. Air abrasion with silica particles followed by silane application also presented high bond strength values. (C) 2013 Elsevier Ltd. All rights reserved.

Estudo comparativo in vitro da resistência ao cisalhamento de sistemas adesivos em dentina humana: uso de hipoclorito de sódio em sistemas convencionais ou primers acidificados

Pós-graduação em Odontologia Restauradora - ICT

Avaliação da eficácia de primers para metal na resistência ao cisalhamento da união entre cimentos resinosos e metais não nobres. Efeito do armazenamento em água

O sucesso das restaurações metálicas indiretas depende, dentre outros fatores, de uma união eficaz entre a estrutura metálica e o cimento dentário empregados. Sabe-se que os primers para metal atuam com comprovada eficácia na resistência adesiva dos cimentos resinosos às ligas nobres. Entretanto, pouco foi estudado sobre o efeito de tais materiais em ligas não nobres. O propósito deste estudo foi avaliar a eficácia de primers para metal na resistência ao cisalhamento da união entre cimentos resinosos e metais não nobres. Discos (9 mm de diâmetro e 3 mm de altura) foram fundidos em liga de NiCr (n=80) e em titânio comercialmente puro (Ti c.p.) (n=80) e foram incluídos em anel de PVC com resina acrílica quimicamente ativada. As superfícies dos discos foram regularizadas com lixas de carbeto de silício de granulação 320, 400 e 600 e jateadas com partículas de óxido de alumínio de 50 µm. Espécimes de cada metal foram divididos em quatro grupos (n=20). Uma matriz metálica bi-partida (5 mm de diâmetro interno e 2 mm de altura) foi posicionada na superfície do espécime. As áreas adesivas receberam um dos seguintes tratamentos: 1) Panavia F; 2) Alloy Primer e Panavia F; 3) Bistite DC e 4) Metaltite e Bistite DC. Para evitar a exposição dos cimentos à luz, estes foram espatulados e inseridos na matriz dentro de uma câmara de revelação radiográfica. Quarenta minutos após a confecção, os espécimes foram armazenados em água destilada a 37ºC por 24 horas e então termociclados (1.000 ciclos, 5ºC e 55ºC, 30 segundos cada banho). Após a termociclagem, os espécimes foram armazenados novamente nas mesmas condições descritas anteriormente por um período de 24 horas (n=10) ou de 6 meses (n=10) antes do ensaio de cisalhamento em uma máquina de ensaios mecânicos (Material Test System 810).

Can Application of Universal Primers Alone Be a Substitute for Airborne-Particle Abrasion to Improve Adhesion of Resin Cement to Zirconia?

Purpose: To determine whether universal primers alone can deliver similar levels of adhesion of resin cement to zirconia ceramic when compared to their application in conjunction with airborne-particle abrasion.Materials and Methods: Sintered zirconia blocks (N = 160) (Lava, 3M ESPE), (5.25 x 5.25 x 3 mm(3)) were embedded in acrylic resin, polished, and randomly distributed into 16 groups (n = 10 per group), according to the factors "universal primer" (8 levels) and "air-particle abrasion" (2 levels): 1. ctr: control, without application of a universal primer; 2. AP: Alloy Primer; 3. MP: Monobond Plus; 4. MZP: Metal Zirconia Primer; 5. MZ: MZ Primer; 6. Sg: Signum Zirconia Bond; 7. SbU: Singlebond Universal; 8. ZP: Z Prime Plus. The universal primers were also used after air abrasion (A) of zirconia to form the following 8 groups: Ctr-A, AP-A, MP-A, MZP-A, MZ-A, Sg-A, SbU-A, and ZP-A. After ultrasonic cleaning, air abrasion was performed using Al2O3 particles (110 mu m, 2.5 bar, 20 s at 10 mm) in a chairside air-abrasion device. After ultrasonic cleaning again, universal primers were applied according to each manufacturer's recommendation. The resin cement (RelyX ARC, 3M ESPE) was built up incrementally and photo-polymerized on the zirconia surface using a silicone mold (empty set = 3.5, height = 3 mm). All specimens were stored in distilled water (60 days at 37 degrees C) and then subjected to shear bond strength testing (SBS) in a universal testing machine (1 mm/min). On a separate set of zirconia specimens, contact angle measurements were made using the sessile drop technique with a goniometer after the application of universal primers on control and air-abraded zirconia surfaces. Data (MPa) were analyzed using one-way ANOVA, Tukey's test, and Student's t-test (alpha = 0.05).Results: When universal primers were used alone, SbU presented significantly higher mean SBS (19.5 +/- 5.8) that did the other primers (0 to 9.9 +/- 6.6) (p = 0.001). When air abraded, the groups AP-A (14.1 +/- 6.1), MP-A (15.9 +/- 5.4), ZP-A (16.9 +/- 7.3), SG-A (19.1 +/- 2.1), SbU-A (12 +/- 1.5) showed significant differences (p = 0.03). Adhesive performance of all universal primers was enhanced after air abrasion, with the exception of the SbU and MZ primers. After air abrasion, contact angle measurements were lower for the each primer (without air abrasion: 28.9 to 83.9; with air abrasion: 27.1 to 63.0), except for MZP.Conclusion: Air abrasion with 110 mu m Al2O3 followed by universal primer application increased the bond strength of tested resin cement to zirconia, with the exception of SbU and MZ.

Hemoculture and polymerase chain reaction using primers TCZ1/TCZ2 for the diagnosis of canine and feline trypanosomiasis

Introduction. American trypanosomiasis, also known as Chagas disease, is a zoonosis caused by Trypanosoma cruzi (T. cruzi). Dogs and cats participate actively in this parasite's transmission cycle. This study aimed at evaluating the occurrence of T. cruzi in dogs and cats from Botucatu, SP, Brazil, as well as at evaluating the technique of hemoculture in LIT (liver infusion tryptose) medium by polymerase chain reaction (PCR). Methods. Blood samples were collected from 50 dogs and 50 cats in Botucatu-SP, Brazil. For hemoculture, the samples were inoculated in LIT medium, and readings were performed for four months. Upon completion of such period, all the hemocultures were processed for parasitic DNA extraction. The PCR reactions were performed by using primers TCZ1/TCZ2. Results. Ten dogs and ten cats (20%) were positive to PCR, and four dogs and three cats (7%) were positive to hemoculture. Only in a one cat sample (1%) there was confirmation of positive hemoculture by PCR for T. cruzi. Conclusions. Results showed that PCR was a suitable tool for the confirmation of the parasite detection in hemoculture samples, and that dogs and cats from Botucatu, SP, Brazil, are maintaining the role of household reservoirs of T. cruzi, which reinforces the need for constant epidemiologic surveillance for this zoonosis.

Biocompatibilidade de primers e adesivo utilizados na confecção de próteses maxilofaciais implantorretidas: análise in vitro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Plant or fungal sequences? An alternative optimized PCR protocol to avoid ITS (nrDNA) misamplification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

RAPD marker use for improving resistance to Helicoverpa zea in corn

Helicoverpa zea is responsible for great losses to the corn, Zen mays L., crops final productivity, and the best way to control it is by improving genetic resistance. In collaboration with corn improvement and increasing resistance to insects through molecular marker assisted selection, this work had as an objective the selection of resistant (RP) and susceptible progenies (SP) to H. zea based on the RAPD technique. Molecular markers were Found, among the resistant progenies and it is suggested that linkage of these within the Zapalote Chico corn race, be used to extract resistance genes from this race as a donor. The progenies were selected from a population of half-sibs exhibiting a broader genetic base (FCAVJ-VF14). After DNA extraction, two sample bulks were formed; one made up of the six most resistant plants, the other of the six least resistant plants. Eighty-six primers were tested for PCR reactions with the resistant and susceptible bulks and analyzed on agarose electrophoresis for the detection of RAPD band polymorphism. The results of the banding patterns and similarity values indicated a nucleotide sequence amplified by the primer OPC-2 as a possible molecular marker for the identification of resistant progenies and a homology region between them and the Zapalote Chico corn race.

Identificação e caracterização de genes vip e cry coleóptero-específicos em isolados de Bacillus thuringiensis

O objetivo deste trabalho foi identificar e caracterizar os genes cry3, vip1, vip2 e vip1/vip2 em uma coleção de 1.078 isolados de Bacillus thuringiensis potencialmente tóxicos para larvas de coleópteros. Foram utilizados pares de oligonucleotídeos iniciadores gerais obtidos a partir de regiões conservadas dos genes e do alinhamento de sequências consenso. Posteriormente, os isolados positivos foram caracterizados por meio da técnica de PCR‑RFLP, tendo-se utilizado enzimas de restrição específicas, para identificar novas subclasses de genes nos isolados. Cento e cinquenta e um isolados foram positivos para os genes avaliados, com maior frequência para o gene vip1/vip2 (139 isolados). Pela técnica de PCR‑RFLP, foram observados 14 perfis polimórficos, o que indica a presença de diferentes alelos e, consequentemente, de distintas subclasses desses genes.

Identification of new isolates of Bacillus thuringiensis using rep-PCR products and delta-endotoxin electron microscopy

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Molecular analysis of the bacterial diversity in a specialized consortium for diesel oil degradation

Diesel oil is a compound derived from petroleum, consisting primarily of hydrocarbons. Poor conditions in transportation and storage of this product can contribute significantly to accidental spills causing serious ecological problems in soil and water and affecting the diversity of the microbial environment. The cloning and sequencing of the 16S rRNA gene is one of the molecular techniques that allows estimation and comparison of the microbial diversity in different environmental samples. The aim of this work was to estimate the diversity of microorganisms from the Bacteria domain in a consortium specialized in diesel oil degradation through partial sequencing of the 16S rRNA gene. After the extraction of DNA metagenomics, the material was amplified by PCR reaction using specific oligonucleotide primers for the 16S rRNA gene. The PCR products were cloned into a pGEM-T-Easy vector (Promega), and Escherichia coli was used as the host cell for recombinant DNAs. The partial clone sequencing was obtained using universal oligonucleotide primers from the vector. The genetic library obtained generated 431 clones. All the sequenced clones presented similarity to phylum Proteobacteria, with Gammaproteobacteria the most present group (49.8 % of the clones), followed by Alphaproteobacteira (44.8 %) and Betaproteobacteria (5.4 %). The Pseudomonas genus was the most abundant in the metagenomic library, followed by the Parvibaculum and the Sphingobium genus, respectively. After partial sequencing of the 16S rRNA, the diversity of the bacterial consortium was estimated using DOTUR software. When comparing these sequences to the database from the National Center for Biotechnology Information (NCBI), a strong correlation was found between the data generated by the software used and the data deposited in NCBI.

Characterization of the genetic variability among Caesalpinia pulcherrima (L.) Sw. (Fabaceae) plants using RAPD molecular markers

O flamboyanzinho (Caesalpinia pulcherrima, Fabaceae) é muito utilizado como cerca-viva e na arborização de ruas, parques e jardins. de florescimento exuberante, suas flores podem apresentar coloração rosa, laranja ou amarela, conforme a variedade. Como características florais são essenciais para a definição do valor comercial de espécies ornamentais, o objetivo principal do trabalho foi verificar a existência de polimorfismo entre plantas de C. pulcherrima, que produzem flores de diferentes colorações, por marcadores moleculares RAPD. Foram escolhidas aleatoriamente 30 plantas adultas, cultivadas no município de Jaboticabal, Estado de São Paulo, para a retirada de amostras foliares para a extração de DNA. Dentre essas matrizes, 20 possuem flores alaranjadas, oito, flores amarelas, e apenas duas produzem flores de coloração rosa. Dos 140 primers de RAPD avaliados, 94 foram capazes de ampliar fragmentos definidos, gerando 246 bandas, das quais se observou 100% de bandas monomórficas, indicando que nenhum dos primers utilizados detectou polimorfismo entre os tratamentos. Concluiu-se que a técnica para detecção de polimorfismo por marcadores RAPD não foi eficiente, e que existe a necessidade de se testarem marcadores moleculares mais específicos. Além disso, a característica morfológica cor de flor é, possivelmente, controlada por vários genes ou pela combinação deles.

Genetic diversity of natural populations of Anemopaegma arvense (Bignoniaceae) in the Cerrado of São Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

An investigation of Leishmania spp. in Didelphis spp. from urban and peri-urban areas in Bauru (São Paulo, Brazil)

Blood and bone marrow samples were taken from 112 Didelphis spp., collected between March 2005 and February 2006, from urban and peri-urban areas of Bauru, São Paulo State, Brazil, to evaluate the hypothesis that these animals might constitute a reservoir of Leishmania spp. Anti-Leishman ia ssp. antibodies were screened in the serum samples using an enzyme-linked immuno-sorbent assay (ELISA) and the polymerase chain reaction (PCR). PCR was performed on fragments of DNA samples from Leishmania spp. using primers 13A and 13B, and showed a positive outcome in 91.6% of the 112 samples tested. of the 107 samples analyzed by ELISA, 71 % were positive. Evidence of epidemiological risk factors such as a circulating parasite and freely moving vectors suggests that Didelphis spp. may participate in the transmission cycle of Leishmania spp. in Bauru. (c) 2007 Elsevier B.V. All rights reserved.

Atividade tóxica de isolados de Bacillus Thuringiensis a larvas de Aedes Aegypti (l.) (diptera: culicidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)