Effect of an acrylic resin combined with an antimicrobial polymer on biofilm formation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prevalence of Candida spp. associated with bacteria species on complete dentures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of the Diramic system for urine cultures

O sistema Diramic foi avaliado para o diagnóstico das infecções do trato urinário (ITU). O sistema Diramic foi desenvolvido em Cuba e possibilita resultados de diagnóstico das infecções do trato urinário (ITU) em quatro horas e baseia-se na variação da turvação do crescimento microbiano no meio de cultura após incubação a 37ºC/4 horas. 396 amostras de urinas provenientes de ambulatórios e enfermarias do HC da FMB-UNESP-Botucatu/SP foram analisadas pelo sistema Diramic. O método da alça calibrada (AC) foi adotado como método de referência. A taxa de coincidência entre os dois métodos foi de 96,46% (382 amostras de urina), não havendo diferença significativa entre os resultados obtidos nos dois métodos. Os resultados para sensibilidade e especificidade foram 84,37 e 98,80% respectivamente e 10 resultados no Diramic foram falsos negativos (2,5%) e 4 falso positivos (1,01%). Os microrganismos identificados nas urinas positivas foram Escherichia coli (68,75%), Klebsiella pneumoniae (10,94%), leveduras (6,25%), Pseudomonas aeruginosa (4,69%), Enterobacter cloacae (3,12%) e Proteus mirabilis, Staphyloccocus coagulase negativo, Morganella morganii e Citrobacter freundii também foram identificadas (1,56% para cada espécie). O método Diramic foi eficiente na triagem das urinoculturas, porém verificou-se algumas restrições quanto ao diagnóstico das infecções do trato urinário quando causadas por leveduras e em pacientes submetidos a antibioticoterapia.

Efeito do teor de soro, açúcar e de frutooligossacarídeos sobre a população de bactérias lácticas probióticas em bebidas fermentadas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effectiveness of 2% peracetic acid for the disinfection of gutta-percha cones

The aim of this study was to evaluate the effectiveness of 2% peracetic acid for the disinfection of gutta-percha cones contaminated in vitro with Escherichia coli, Staphylococcus aureus, Streptococcus mutans, Candida albicans and Bacillus subtilus (in spore form). Two hundred and twenty-five gutta-percha cones were contaminated with standardized suspensions of each microorganism and incubated at 37 degrees C for 24 h. The cones were divided into 10 experimental groups (n = 15), according to the microorganism tested and disinfection testing times. The disinfection procedure consisted of immersing each cone in a plastic tube containing the substance. The specimens remained in contact with the substance for 1 or 2.5 minutes. Afterwards, each cone was transferred to a 10% sodium thiosulphate solution (Na2S2O3) to neutralize the disinfectant. Microbial biofilms adhering to the cones were dispersed by agitation. Aliquots of 0.1 ml of the suspensions obtained were plated on Sabouraud dextrose agar, or brain and heart infusion agar, and incubated at 37 degrees C for 24 h. The results were expressed in colony forming units (CFU/ml) and the data were submitted to the Wilcoxon Signed Rank Test (level of significance at 0.05). A significant reduction was observed, after 1 minute of exposure, in the test solution for C. albicans (p = 0.0190), S. aureus (p = 0.0001), S. mutans (p = 0.0001), B. subtilis (p = 0.0001), and E. coli (p = 0.0001). After 2.5 minutes of exposure, 100% of the microbial inocula were eliminated. It was concluded that the 2% peracetic acid solution was effective against the biofilms of the tested microorganisms on gutta-percha cones at 1 minute of exposure.

Surface Roughness and Bacterial Adherence to Resin Composites and Ceramics

Purpose: The aim of this study was to evaluate the surface roughness and the in vitro adherence of Streptococcus mutans to indirect aesthetic restorative materials that are uncoated with saliva.Materials and Methods: Four groups of restorative materials were evaluated according to material type: (1) microparticulate feldspathic ceramic; (2) leucite-reinforced feldspathic ceramic; (3) microhybrid resin composite and (4) microfilled resin composite. Twenty standardised samples of each material were produced. Roughness analysis (Ra, n = 10) was performed using a roughness analyser. Adhesion tests (n = 10) were carried out in 24-well plates; colony-forming units (CFU/mL) were evaluated. The mean values of roughness (mu m) and adherence (CFU/mL) for each group were subjected to an analysis of variance and a Tukey test.Results: The leucite-reinforced feldspathic ceramic was rougher and presented higher bacterial adherence than the microparticulate feldspathic ceramic. The resin composites were similar with regard to surface roughness and bacterial adherence.Conclusions: The microhybrid and microfilled resin composites were similar and the leucite-reinforced feldspathic ceramic was rougher and presented higher bacterial adherence than the microparticulate feldspathic ceramic.

Comparison of the efficacy of Rose Bengal and erythrosin in photodynamic therapy against Enterobacteriaceae

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microbiological or Chemical Models of Enamel Secondary Caries Compared by Polarized-Light Microscopy and Energy Dispersive X-ray Spectroscopy

Different secondary caries models may present different results. The purpose of this study was to compare different in vitro secondary caries models, evaluating the obtained results by polarized-light microscopy (PLM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Standardized human enamel specimens (n = 12) restored with different materials (Z250 conventional composite resin-CRZ, Freedom polyacid-modified composite resin-CRF, Vitremer resin-modified glass-ionomer-GIV, and Fuji IX conventional glass-ionomer cement-GIF) were submitted to microbiological (MM) or chemical caries models (CM). The control group was not submitted to any caries model. For MM, specimens were immersed firstly in sucrose broth inoculated with Streptococcus mutans ATCC 35688, incubated at 37 degrees C/5% CO(2) for 14 days and then in remineralizing solution for 14 days. For CM, specimens were submitted to chemical pH-cycling. Specimens were ground, submitted to PLM and then were dehydrated, gold-sputtered and submitted to SEM and EDS. Results were statistically analyzed by Kruskall-Wallis and Student-Newman-Keuls tests (alpha = 0.05). No differences between in vitro caries models were found. Morphological differences in enamel demineralization were found between composite resin and polyacid-modified composite resin (CRZ and CRF) and between the resin-modified glass-ionomer and the glass-ionomer cement (GIF and GIV). GIF showed higher calcium concentration and less demineralization, differing from the other materials. In conclusion, the glass-ionomer cement showed less caries formation under both in vitro caries models evaluated. (C) 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 90B: 635-640, 2009

Morphology and bacterial colonisation of tooth/ceramic restoration interface after different cement excess removal techniques

Objectives: To evaluate the influence of different protocols for resin cement removal during cementation on biofilm formation.Methods: Twenty-eight ceramic blocks, which were injected under pressure, were placed over enamel blocks obtained from freshly extracted bovine incisors. The ceramic blocks were cemented to the enamel blocks using a dual-cured resin cement and the excess resin was removed according to the experimental group: TS: Teflon spatula; BR: brush; BR+: brush and polishing; SB+: scalpel blade and polishing. After autoclaving, the samples were colonised by incubation in a sucrose broth suspension standardised with Streptococcus mutans in microaerophilic stove. Specimens were quantitatively analysed for bacterial adherence at the adhesive interface using confocal laser scanning microscopy and counting the colony forming units, and qualitatively analysed using SEM. The roughness (Ra/Rz/RSm) was also analysed. Data were analysed by 1-way ANOVA and Tukey's test (5%).Results: The roughness values ranged from 0.96 to 1.69 mu m for Ra (p > 0.05), from 11.59 to 22.80 mu m for Rz (p = 0.02 < 0.05) and from 293.2 to 534.3 mu m for RSm (p = 0.00). Bacterial adhesion varied between 1,974,000 and 2,814,000 CFU/ml (p = 0.00). Biofilm mean thickness ranged from 0.477 and 0.556 mu m (p > 0.05), whilst the biovolume values were between 0.388 and 0.547 mu m(3)/mu m(2) (p = 0.04). Lower values for roughness, bacterial adhesion, biofilm thickness and biovolume were found with BR, whilst TS presented the highest values for most of the parameters. SEM images confirmed the quantitative values.Conclusions: The restoration margin morphology and interface roughness affects bacterial accumulation. The brush technique promoted less bacterial colonisation at the adhesive interface than did the other removal methods.Clinical significance: The brush technique seems to be a good option for removing the excess resin cement after adhesive cementation in clinical practice, as indicated by its better results with lower bacterial colonisation. (C) 2012 Elsevier Ltd. All rights reserved.

Ability of different restorative materials to prevent in situ secondary caries: analysis by polarized light-microscopy and energy-dispersive X-ray

Secondary caries is the main cause of direct restoration replacement. The purpose of this study was to analyze enamel adjacent to different restorative materials after in situ cariogenic challenge using polarized-light microscopy (PLM), scanning electron microscopy (SEM) and energy-dispersive X-ray analysis (EDS). Twelve volunteers, with a low level of dental plaque, a low level of mutans streptococci, and normal salivary flow, wore removable palatal acrylic appliances containing enamel specimens restored with Z250 composite, Freedom composite, Fuji IX glass-ionomer cement, or Vitremer resin-modified glass-ionomer for 14 days. Volunteers dripped one drop of 20% sucrose solution (n = 10) or distilled water (control group) onto each specimen 8 times per day. Specimens were removed from the appliances and submitted to PLM for examination of the lesion area (in mm(2)), followed by dehydration, gold-sputtering, and submission to SEM and EDS. The calcium (Ca) and phosphorus (P) contents were evaluated in weight per cent (%wt). Differences were found between Z250 and Vitremer, and between Z250 and FujiIX, when analyzed using PLM. Energy-dispersive X-ray analysis results showed differences between the studied materials regarding Ca %wt. In conclusion, enamel adjacent to glass-ionomer cement presented a higher Ca %wt, but this material did not completely prevent enamel secondary caries under in situ cariogenic challenge.

In vitro study of the Nd : YAG laser effect on human dental enamel: Optical and scanning electron microscope analysis

Objective: the Nd:YAG laser irradiation of dental enamel was evaluated in enamel demineralization experiments in a Streptococcus mutans culture media. Summary Background Data: Previous studies had shown that a continuous wave Nd:YAG laser at an energy of approximately 67 mJ may induce an increased acid resistance in human dental enamel when exposed to severe demineralization conditions. Methods: Enamel windows of 3 x 4 cm in the buccal surface were irradiated with a continuous wave Nd:YAG laser at a wavelength of 1,064 Ecm using energy densities of from 83.75 to 187.50 J/cm(2), Enamel windows of 3 x 4 cm on the lingual surface served as control (without the laser irradiation). The enamel windows were then exposed to a Streptococcus mutans culture media at a temperature of 37 degrees C for 15 and 21 days. The laser effects and demineralization were examined both by optical microscopy and scanning electron microscopy (SEM), Results: A comparison between the lased and the unlased windows of enamel showed fusion and recrystalization of the enamel and increased acid-resistance in all groups irradiated with the Nd:YAG laser, on the other hand, the 3 x 4 delimited enamel surfaces from the control group (not irradiated with the Nd:YAG laser) showed 100% deminerization, Conclusions: These findings are consistent with the finding that laser irradiation of dental results in significant reduction of the effective solubility of enamel mineral.

Detecção de Curtobacterium flaccumfaciens pv. flaccumfaciens em sementes de feijoeiro produzidas em Santa Catarina

Foi avaliada a presença de Curtobacterium flaccumfaciens pv. flaccumfaciens em 37 amostras de sementes de feijoeiro, dos grupos preto e carioca, produzidas em municípios do Estado de Santa Catarina, nas safras 2004/2005 e 2005/2006. Para a detecção, as sementes foram maceradas e alíquotas de sua suspensão foram transferidas para o meio de cultura semi-seletivo MSCFF. A identidade dos isolados obtidos foi comprovada por meio da observação da morfologia celular, coloração diferencial de Gram, tolerância a NaCl a 7% e patogenicidade em cultivares de feijoeiro suscetíveis. Detectou-se a presença de Curtobacterium flaccumfaciens pv. flaccumfaciens em 23 amostras (62,2%), indicando a importância das sementes como fonte de inoculo inicial.

Caracterização patogênica e molecular de Plasmodiophora brassicae

Poucos estudos foram desenvolvidos no Brasil sobre a doença hérnia das crucíferas, causada por Plasmodiophora brassicae. Realizou-se testes de severidade da doença causada por diferentes populações do patógeno em espécies de brássicas (couve-flor, couve-chinesa suscetível, couve-chinesa resistente, brócolis e repolho). As populações de P. brassicae foram obtidas de raízes de brássicas infectadas originárias de algumas regiões produtoras no Brasil. Os testes de severidade foram realizados em casa de vegetação (25±2ºC) mediante inoculações, no colo de cada planta com 2 mL da suspensão de esporos do patógeno, na concentração de 107 esporos mL-1. As avaliações ocorreram 35 dias após a inoculação. em laboratório foi realizada a extração de DNA dessas populações e análises de PCR-RAPD para a comparação das características genéticas. As populações obtidas nas regiões de Carandaí MG e Colombo PR mostraram-se mais agressivas, manifestando patogenicidade até mesmo em cultivar considerada resistente. Entretanto, não foi observado um padrão genético específico quanto ao local de origem das populações avaliadas, sugerindo que mesmo em locais distantes e com diferenças quanto à severidade, tais populações são geneticamente semelhantes.

Agressividade de linhagens de Xanthomonas axonopodis pv. aurantifolii Tipo C em lima ácida 'Galego'

O presente trabalho objetivou gerar informações referentes à agressividade de linhagens de Xanthomonas axonopodis pv. aurantifolii Tipo C(Xaa-C), produtoras (PP) e não produtoras de pigmento (NP) escuro em meio de cultura, comparativamente a X. axonopodis pv. citri Tipo A (Xac) . Os tratamentos foram formados por 14 linhagens, sendo sete de Xaa-C PP, cinco Xaa-C NP, e duas linhagens de Xac. As linhagens foram inoculadas através de ferimentos, em folhas de lima ácida 'Galego' (Citrus aurantifolia Swingle), com agulha previamente mergulhada em uma suspensão de células bacterianas (10(7) UFC/mL). Foram realizadas dez repetições para cada tratamento, representadas por uma planta cada. As plantas foram mantidas em casa de vegetação durante todo o experimento. As linhagens diferiram entre si quanto ao período de incubação, diâmetro e populações bacterianas das lesões e, comparativamente, Xaa-C NP mostraram-se mais agressivas do que Xaa-C PP. Algumas linhagens induziram sintomas que diferiram quanto à presença e extensão de anasarca, halo amarelo e saliência do tecido necrosado.

Mancha de mirotécio em algodoeiro causada por Myrothecium roridum

A mancha de mirotécio causada por Myrothecium roridum Tode ex Fr. foi observada em lavouras de algodão no sul do Maranhão, causando reduções de produtividade de até 60%. Os sintomas da doença são lesões necróticas, circulares, com estruturas salientes, os esporodóquios, de distribuição irregular. Foram observadas lesões nos pecíolos, brácteas, folhas e maçãs de algodoeiro cv. Deltapine Acala 90, Fibermax 966 e Sure Grow 821. O isolamento do fungo foi realizado em meio de cultura batata-dextrose-ágar (BDA). O teste de patogenicidade foi realizado em maçãs sadias, destacadas de algodoeiro cv. Fibermax 966, no estádio vegetativo R6, previamente desinfestadas. Foram testados 13 isolados de M. roridum, oito provenientes de algodão e cinco de soja. Avaliações das estruturas fúngicas foram realizadas com auxílio de microscópio óptico equipado com um micrômetro ocular. Os isolados causaram infecções em maçãs de algodão e destacou-se como mais agressivo o MA-75, proveniente de algodão, apresentando diâmetro médio de lesão de 1,3cm, aos sete DAI e 2,7cm aos 14 DAI. Todos os isolados formaram esporodóquios dispostos concenticamente em meio BDA. Os conídios são unicelulares, hialinos a oliváceos, abundantemente produzidos em massa verde-oliva a preta. Os conídios de isolados provenientes de algodão mediram, em média, 5,1µm x 1,5µm, e os obtidos de soja, 5,8µm x 1,5µm. Estes resultados relatam a ocorrência da mancha de mirotécio, causada por M. roridum, em lavouras comerciais de algodão no Brasil.