Estudo da sinterabilidade de ligas de níquel obtidas por meio dos portadores de liga sic, si3n4 ou si metálico com grafita

Nickel alloys are frequently used in applications that require resistance at high temperatures associated with resistance to corrosion. Alloys of Ni-Si-C can be obtained by means of powder metallurgy in which powder mixtures are made of metallic nickel powders with additions of various alloying carriers for such were used in this study SiC, Si3N4 or Si metal with graphite. Carbonyl Ni powder with mean particle size of 11 mM were mixed with 3 wt% of SiC powders with an average particle size of 15, 30 and 50 μm and further samples were obtained containing 4 to 5% by mass of SiC with average particle size of 15 μm. Samples were also obtained by varying the carrier alloy, these being Si3N4 powder with graphite, with average particle size of 1.5 and 5 μm, respectively. As a metallic Si graphite with average particle size of 12.5 and 5 μm, respectively. The reference material used was nickel carbonyl sintered without adding carriers. Microstructural characterization of the alloys was made by optical microscopy and scanning electron microscopy with semi-quantitative chemical analysis. We determined the densities of the samples and measurement of microhardness. We studied the dissociation of carriers alloy after sintering at 1200 ° C for 60 minutes. Was evaluated also in the same sintering conditions, the influence of the variation of average particle size of the SiC carrier to the proportion of 3% by mass. Finally, we studied the influence of variation of the temperatures of sintering at 950, 1080 and 1200 ° C without landing and also with heights of 30, 60, 120 and 240 minutes for sintering where the temperature was 950 °C. Dilatometry curves showed that the SiC sintered Ni favors more effectively than other carriers alloy analyzed. SiC with average particle size of 15 μm active sintering the alloy more effectively than other SiC used. However, with the chemical and morphological analyzes for all leagues, it was observed that there was dissociation of SiC and Si3N4, as well as diffusion of Si in Ni matrix and carbon cluster and dispersed in the matrix, which also occurred for the alloys with Si carriers and metallic graphite. So the league that was presented better results containing Si Ni with graphite metallic alloy as carriers, since this had dispersed graphite best in the league, reaching the microstructural model proposed, which is necessary for material characteristic of solid lubricant, so how we got the best results when the density and hardness of the alloy

Redução aluminotérmica do óxido de tântalo usando uma tocha de plasma como ignitor

In this work was used a plasma torch of non transferred arc with argon as work gas, using a power supply with maximum DC current of 250 A and voltage of 30 V to activate the plasma and keep it switched on. The flame temperature was characterized by optical emission spectroscopy, through Boltzmann-plot-method. The torch has been used like igniter in the aluminothermic reduction of the mixture tantalum oxide and aluminum, seeking to obtain metallic tantalum. In heating of the reagents only one particle will be considered to study interactions between plasma-particle, seeking to determinate its fusion and residence time. The early powders were characterized by laser granulometry, scanning electron microscopy (SEM) and X-ray diffraction analysis. The final product of this reaction was characterized by SEM and X-ray diffraction. Crystallite size was calculated by the Scherrer equation and microdeformation was determined using Willamsom-Hall graph. With Rietveld method was possible to quantify the percentile in weight of the products obtained in the aluminothermic reaction. Semi-quantitative chemical analysis (EDS) confirmed the presence of metallic tantalum and Al2O3 as products of the reduction. As was waited the particle size of the metallic tantalum produced, presents values in nanometric scale due the short cooling time of those particles during the process

Expressão imuno-histoquímica da e-caderina e da ß-catenina em carcinoma epidermóide oral com e sem metástase nodal

The adhesion molecules E-cadherin and β-catenin have been studied as possible markers to distinguish carcinomas with and without metastatic potential. The objective of this research was to study the imunohistochemistry expression of the E-cadherin and β-catenin in oral squamous cell carcinoma (OSCC), aiming to contribute for the better understanding of the biological behavior of this lesion. The sample consisted of 30 cases of OSCC, being 15 of tongue and 15 of lower lip. The profile and intensity of labeling and semi quantitative analysis of the percentage of immunopositive tumoral cells in membrane for E-cadherin and β-catenin had been related with the anatomical localization of the lesion, the presence or not of nodal metastasis and the histological grade of malignancy in the invasive front area of the tumor. It was registered the presence or not of cytoplasmic and nuclear labeling of the β-catenin. The results had been submitted to the statistical analysis, being used the Mann-Whitney Test, the Fisher Test and the Spearman Correlation Coefficient (α=0, 05). The results showed that the expression in membrane for E-cadherin and β-catenin was, predominantly, the heterogeneous profile in the lower lip and tongue carcinomas, as well as in the cases with and without nodal metastasis. It was not observed significant statistical difference between expression profile and amount of immunopositive cells for E-cadherin, β-catenin and the anatomical localization of the lesion and for the presence or not of nodal metastasis. However, there was significant difference of the reduced expression of these proteins with the high score of malignancy. It was verified that the expression of the β-catenin in cytoplasm was present in 22 (73.33%) of the 30 analyzed cases, and 6 cases (20%) showed nuclear expression. The statistical analysis detected significant association between the expression of the β-catenin in the cytoplasm with the histological grade of malignancy, being this molecule more frequently present in the cytoplasm in the cases of high score of malignancy. It was concluded that the reduced immunoexpression of these proteins in membrane can be related with the lowest cellular differentiation, as well as with the pattern of invasion in nests and isolated cells, demonstrated in the cases of OSCC with high histological grade of malignancy

Estudo dos principais fatores que influenciam na solubilização dos hpas em águas

Polycyclic aromatic hydrocarbons (PAHs) constitute a family of compounds characterized by having two or more condensed aromatic rings and for being a class of substances that are widely distributed in the environment as a complex mixture, being very persistent in the environment due to its low solubility in water. The application of chemometric methods to analytical chemistry has provided excellent results in studying the solubility of PAHs in aqueous media in order to understand the mechanisms involved in environmental contamination. The method consists in analyzing the solubilization of PAHs from diesel oil in water varying parameters such as stirring time, volume of oil added and pH, using a full factorial design of two levels and three factors. PAHs were extracted with n-hexane and analyzed by fluorescence spectroscopy because they have molecular characteristics fluorescent due to the large number of condensed rings and links, and gas chromatography coupled to a mass spectrometer (GC-MS). The results of fluorescence analysis showed that only the stirring time and pH influenced the solubility of PAHs in diesel fuel. How is a non-selective technique for the study of fluorescence was performed on form and semi-quantitative. And for the chromatographic analysis the results showed that the solubility of the different PAHs is influenced differently so that you can classify them into groups by the results of the effects

Síntese e caracterização da ferrita de MnZn obtida pelo método dos citratos precursores

It was synthesized MnZn ferrite with general formulae Mn1-xZnxFe2O4 (mol%), 0,3 ≤ x ≤ 0,7 by using the citrate precursor method. The precursors decomposition was studied by thermogravimetric analysis (TGA), differential thermogravimetric analysis (DTG), differential thermal analysis (DTA) and Fourier transform infrared (FTIR) of powder calcined at 350ºC/3,5h. X-ray diffraction pattern (XRD) of samples was done from 350 to 1200ºC/2h using various atmospheres. The power calcined at 350ºC/3,5h formed spinel phase. It is necessary atmosphere control to avoid secondary phase such as hematite. From 900 to 1200ºC was obtained 90,66 and 100% of MnZn spinel ferrite phase, respectively. Analysis by dispersive energy scanning (EDS) at 350ºC shows high Mn and Zn dispersion, indicating that the diffusion process was homogeneous. Semi-quantitative analysis by EDS verified that despite the atmosphere control during calcinations at high temperatures (< 800ºC) occurred ZnO evaporation causing stoichiometric deviation. Vibrating sample magnetometer (VSM) measures show soft ferrite material characteristics with Hc from 6,5 x 10-3 to 11,1 x 10-2 T. Saturation magnetization (Ms) and initial permeability (µi) of MnZn spinel phase obtained, respectively, from 14,3 to 83,8 Am2/kg and 14,1 to 62,7 (Am2/kg)T

Cartografia temporal e análise geoambiental da dinâmica da foz do Rio Piranhas-Açu, regiao de Macau-RN, com base em imagens Landast 5-MT

This work embraces the application of Landsat 5-TM digital images, comprising August 2 1989 and September 22 1998, for temporal mapping and geoenvironmental analysis of the dynamic of Piranhas-Açu river mouth, situated in the Macau (RN) region. After treatment using several digital processing techniques (e.g. colour composition in RGB, ratio of bands, principal component analysis, index methods, among others), it was possible to generate several image products and multitemporal maps of the coastal morphodynamics of the studied area. Using the image products it was possible the identification and characterization of the principal elements of interest (vegetation, soil, geology and water) in the surface of the studied area, associating the spectral characteristics of these elements to that presented by the image products resulting of the digital processing. Thus, it was possible to define different types of soils: Amd, AQd6, SK1 and LVe4; vegetation grouping: open arboreal-shrubby caatinga, closed arborealshrubby caatinga, closed arboreal caatinga, mangrove vegetation, dune vegetation and areas predominately constituted by juremas; geological units: quaternary units beach sediments, sand banks, dune flats, barrier island, mobile dunes, fixed dunes, alluvium, tidal and inundation flats, and sandy facies of the Potengi Formation; tertiary-quaternary units Barreiras Formation grouped to the clayey facies of the Potengi Formation, Macau Formation grouped to the sediments of the Tibau Formation; Cretaceous units Jandaíra Formation; moreover it was to identify the sea/land limit, shallow submersed areas and suspended sediments. The multitemporal maps of the coastal morphodynamics allowed the identification and a semi-quantitative evoluation of regions which were submitted to erosive and constructive processes in the last decade. This semi-quantitative evoluation in association with an geoenvironmental characterization of the studied area are important data to the elaboration of actions that may minimize the possible/probable impacts caused by the implantation of the Polo Gas/Sal and to the monitoring of areas explorated by the petroleum and salt industries

Estudo da sinterabilidade de ligas de níquel obtidas por meio dos portadores de liga sic, si3n4 ou si metálico com grafita

Nickel alloys are frequently used in applications that require resistance at high temperatures associated with resistance to corrosion. Alloys of Ni-Si-C can be obtained by means of powder metallurgy in which powder mixtures are made of metallic nickel powders with additions of various alloying carriers for such were used in this study SiC, Si3N4 or Si metal with graphite. Carbonyl Ni powder with mean particle size of 11 mM were mixed with 3 wt% of SiC powders with an average particle size of 15, 30 and 50 μm and further samples were obtained containing 4 to 5% by mass of SiC with average particle size of 15 μm. Samples were also obtained by varying the carrier alloy, these being Si3N4 powder with graphite, with average particle size of 1.5 and 5 μm, respectively. As a metallic Si graphite with average particle size of 12.5 and 5 μm, respectively. The reference material used was nickel carbonyl sintered without adding carriers. Microstructural characterization of the alloys was made by optical microscopy and scanning electron microscopy with semi-quantitative chemical analysis. We determined the densities of the samples and measurement of microhardness. We studied the dissociation of carriers alloy after sintering at 1200 ° C for 60 minutes. Was evaluated also in the same sintering conditions, the influence of the variation of average particle size of the SiC carrier to the proportion of 3% by mass. Finally, we studied the influence of variation of the temperatures of sintering at 950, 1080 and 1200 ° C without landing and also with heights of 30, 60, 120 and 240 minutes for sintering where the temperature was 950 °C. Dilatometry curves showed that the SiC sintered Ni favors more effectively than other carriers alloy analyzed. SiC with average particle size of 15 μm active sintering the alloy more effectively than other SiC used. However, with the chemical and morphological analyzes for all leagues, it was observed that there was dissociation of SiC and Si3N4, as well as diffusion of Si in Ni matrix and carbon cluster and dispersed in the matrix, which also occurred for the alloys with Si carriers and metallic graphite. So the league that was presented better results containing Si Ni with graphite metallic alloy as carriers, since this had dispersed graphite best in the league, reaching the microstructural model proposed, which is necessary for material characteristic of solid lubricant, so how we got the best results when the density and hardness of the alloy

Redução aluminotérmica do óxido de tântalo usando uma tocha de plasma como ignitor

In this work was used a plasma torch of non transferred arc with argon as work gas, using a power supply with maximum DC current of 250 A and voltage of 30 V to activate the plasma and keep it switched on. The flame temperature was characterized by optical emission spectroscopy, through Boltzmann-plot-method. The torch has been used like igniter in the aluminothermic reduction of the mixture tantalum oxide and aluminum, seeking to obtain metallic tantalum. In heating of the reagents only one particle will be considered to study interactions between plasma-particle, seeking to determinate its fusion and residence time. The early powders were characterized by laser granulometry, scanning electron microscopy (SEM) and X-ray diffraction analysis. The final product of this reaction was characterized by SEM and X-ray diffraction. Crystallite size was calculated by the Scherrer equation and microdeformation was determined using Willamsom-Hall graph. With Rietveld method was possible to quantify the percentile in weight of the products obtained in the aluminothermic reaction. Semi-quantitative chemical analysis (EDS) confirmed the presence of metallic tantalum and Al2O3 as products of the reduction. As was waited the particle size of the metallic tantalum produced, presents values in nanometric scale due the short cooling time of those particles during the process

A saúde psíquica de quem faz saúde: uma análise crítica sobre a humanização direcionada ao profissional de saúde

It is noticeable that pressure, tension and overwork are frequent in health professionals routine. The work related to the ward area demands deep attention and surveillance. Because of that, it is essential to have a specific look at the humanization directed at health professionals, considering that taking care of other human beings is the essence of their job. This study has analyzed the psychic health levels, as well as the stress health professionals are submitted to, providing a debate about the humanization in 06 public hospitals (03 of them awarded by actions of humanization, and 03 not awarded) in Rio Grande do Norte state, Brazil. A study with 126 active health professionals (doctors, nurses, psychologists, nutritionists and social workers) in ward areas in their respective institutions was carried out. The thesis presented, with multi-disciplinary characteristic, counted on the support of statisticians (to calculate samples and data analysis), psychologists, social workers and administrators (linked to the human resources sector in each hospital). A cross-sectional study was performed, taking into consideration both quantitative and qualitative factors. The tools used for that were a semistructured questionnaire with socio-demographic characteristics, work and humanization; Lipp's Stress Symptoms Inventory for Adults (ISSL), and the Goldberg s General Health Questionnaire (QSG). The workers are predominantly women (84,9%), married (54,8%), between 46 and 55 years old (40,5%), working in the same institution for more than 20 years (22,2%), and between 16 and 20 years (20,6%), respectively. They work 40 hours a week (71,4%) and have multiple jobs (61,9%). Although most of these individuals global psychic health is in a good level, there are a significant number of people that is gradually getting worse concerning psychic stress (F1) showed by QSG (54,7%), and stress showed by ISSL(42,1%). Observing the categories, nurses (41,5%). Nutritionists (20,8%), doctors and social workers (18,9%), were among the most affected. About general health (F6), 63% of the awarded hospitals and 70% of the not awarded ones, presented good health levels (ranging from 5 to 50%). It was also noticed that, in the groups mentioned above, 25 and 20% respectively, were inserted in scores between 55 to 90%, what means that they are in worsening phase. The fact that the hospital is awarded or well recognized doesn t interfere in health professionals stress level and in their psychic health. Through what was heard from these individuals, it was possible to verify that they know little about humanization, once few of them identify or know that the service they offer is in an adoption process by Ministerial Policies. It was also detected the necessity of developing actions aimed at worker s health. Such results showed the importance of have more investments in programs that are directed to workers well-being, because they deal with other people s health and it is known that it is difficult for them to offer high-quality assistance if there are not suitable physical, psychological and material conditions to help them develop their jobs. As a warning, it is fair to say that investments in actions that provide humanized care to health professionals, mainly concerning preventive care for their health and life quality in their work

Abordagem dos aspectos psicológicos da mulher infértil :um estudo quali-quantitativo

Purpose: assess the frequency of stress and anxiety levels in infertile women, correlate these aspects with risk factors and qualitatively analyze feelings resultant from the inability to conceive, in order to obtain data for specific psychological guidance. Methods: the case-control study included a total of 302 women, 152 being infertile (case group: 30.3 ± 5.4 years), and 150 non-fertile (control group: 25.7 ± 7.9 years). The quantitative approach involved the application of Lipp s Stress Symptoms Inventory (LSSI) and State-Trait Anxiety Inventory (STAI), whereas the qualitative approach consisted of a semi-structured interview. Response variables considered were: stress frequency and anxiety scores (State and Trait). Statistical analysis compared frequencies and medians between groups, by means of qui-squared and Mann-Whitney tests, respectively, and constructed logistical regression models to test associations between response variables and risk factors considered. Qualitative data were analyzed descriptively and categorized in order to perform correspondence analysis. The level of significance was 5%. Results: in the study sample, stress frequency was higher in the case group than in the control(61.8 and 36.0%, respectively), however, significant differences were not observed between groups in relation to stress phases and predominant symptomology type. With respect to anxiety, there were no significant differences between case and control groups as to median state scores [39.5 (35.0 46.0) and 41.0 (35.7 47.0 ); respectively) and anxiety trait scores [44.0 (34.0 51.0) and 42.0 (36.0 49.2); respectively). Risk factors significantly associated with greater risk for high anxiety scores in the case group were: primary infertility, unawareness of the causal factor, diagnostic phase investigation, religion, lack of children from other marriages and the fact that the woman was previously married. The qualitative approach demonstrated that infertility provokes emotional responses, such as sadness, anxiety, anger, fear and guilt. Conclusions: it can be concluded that infertile women are more vulnerable to stress; however, they are capable of adapting to stressful events without serious physical or psychological compromising