Modos projetuais de simulação: uso de ferramentas de simulação térmica no processo projetual de arquitetura

This thesis aims to describe and demonstrate the developed concept to facilitate the use of thermal simulation tools during the building design process. Despite the impact of architectural elements on the performance of buildings, some influential decisions are frequently based solely on qualitative information. Even though such design support is adequate for most decisions, the designer will eventually have doubts concerning the performance of some design decisions. These situations will require some kind of additional knowledge to be properly approached. The concept of designerly ways of simulating focuses on the formulation and solution of design dilemmas, which are doubts about the design that cannot be fully understood nor solved without using quantitative information. The concept intends to combine the power of analysis from computer simulation tools with the capacity of synthesis from architects. Three types of simulation tools are considered: solar analysis, thermal/energy simulation and CFD. Design dilemmas are formulated and framed according to the architect s reflection process about performance aspects. Throughout the thesis, the problem is investigated in three fields: professional, technical and theoretical fields. This approach on distinct parts of the problem aimed to i) characterize different professional categories with regards to their design practice and use of tools, ii) investigate preceding researchers on the use of simulation tools and iii) draw analogies between the proposed concept, and some concepts developed or described in previous works about design theory. The proposed concept was tested in eight design dilemmas extracted from three case studies in the Netherlands. The three investigated processes are houses designed by Dutch architectural firms. Relevant information and criteria from each case study were obtained through interviews and conversations with the involved architects. The practical application, despite its success in the research context, allowed the identification of some applicability limitations of the concept, concerning the architects need to have technical knowledge and the actual evolution stage of simulation tools

Sistemas de informação geográfica e análise espacial de dados como ferramentas para determinação de agregação espacial de doenças: a hanseníase como modelo

This work demonstrates the importance of using tools used in geographic information systems (GIS) and spatial data analysis (SDA) for the study of infectious diseases. Analysis methods were used to describe more fully the spatial distribution of a particular disease by incorporating the geographical element in the analysis. In Chapter 1, we report the historical evolution of these techniques in the field of human health and use Hansen s disease (leprosy) in Rio Grande do Norte as an example. In Chapter 2, we introduced a few basic theoretical concepts on the methodology and classified the types of spatial data commonly treated. Chapters 3 and 4 defined and demonstrated the use of the two most important techniques for analysis of health data, which are data point processes and data area. We modelled the case distribution of Hansen s disease in the city of Mossoró - RN. In the analysis, we used R scripts and made available routines and analitical procedures developed by the author. This approach can be easily used by researchers in several areas. As practical results, major risk areas in Mossoró leprosy were detected, and its association with the socioeconomic profile of the population at risk was found. Moreover, it is clearly shown that his approach could be of great help to be used continuously in data analysis and processing, allowing the development of new strategies to work might increase the use of such techniques in data analysis in health care

Mapa de Conteúdos e Mapa de Dependências:Ferramentas Pedagógicas para uma Metodologia de Planejamento baseada em Objetivos Educacionais e sua Implementação em um Ambiente Virtual de Aprendizagem

Furthered mainly by new technologies, the expansion of distance education has created a demand for tools and methodologies to enhance teaching techniques based on proven pedagogical theories. Such methodologies must also be applied in the so-called Virtual Learning Environments. The aim of this work is to present a planning methodology based on known pedagogical theories which contributes to the incorporation of assessment in the process of teaching and learning. With this in mind, the pertinent literature was reviewed in order to identify the key pedagogical concepts needed to the definition of this methodology and a descriptive approach was used to establish current relations between this conceptual framework and distance education. As a result of this procedure, the Contents Map and the Dependence Map were specified and implemented, two teaching tools that promote the planning of a course by taking into account assessment still in this early stage. Inserted on Moodle, the developed tools were tested in a course of distance learning for practical observation of the involved concepts. It could be verified that the methodology proposed by the above-mentioned tools is in fact helpful in course planning and in strengthening educational assessment, placing the student as central element in the process of teaching and learning

Novas ferramentas para monitoramento ambiental usando SIG Web

The use of Geographic Information Systems (GIS) has becoming very important in fields where detailed and precise study of earth surface features is required. Applications in environmental protection are such an example that requires the use of GIS tools for analysis and decision by managers and enrolled community of protected areas. In this specific field, a challenge that remains is to build a GIS that can be dynamically fed with data, allowing researchers and other agents to recover actual and up to date information. In some cases, data is acquired in several ways and come from different sources. To solve this problem, some tools were implemented that includes a model for spatial data treatment on the Web. The research issues involved start with the feeding and processing of environmental control data collected in-loco as biotic and geological variables and finishes with the presentation of all information on theWeb. For this dynamic processing, it was developed some tools that make MapServer more flexible and dynamic, allowing data uploading by the proper users. Furthermore, it was also developed a module that uses interpolation to aiming spatial data analysis. A complex application that has validated this research is to feed the system with data coming from coral reef regions located in northeast of Brazil. The system was implemented using the best interactivity concept provided by the AJAX model and resulted in a substantial contribution for efficiently accessing information, being an essential mechanism for controlling events in the environmental monitoring

Estudos de algumas ferramentas de coleta e visualização de dados e desempenho de aplicações paralelas no ambiente MPI

The last years have presented an increase in the acceptance and adoption of the parallel processing, as much for scientific computation of high performance as for applications of general intention. This acceptance has been favored mainly for the development of environments with massive parallel processing (MPP - Massively Parallel Processing) and of the distributed computation. A common point between distributed systems and MPPs architectures is the notion of message exchange, that allows the communication between processes. An environment of message exchange consists basically of a communication library that, acting as an extension of the programming languages that allow to the elaboration of applications parallel, such as C, C++ and Fortran. In the development of applications parallel, a basic aspect is on to the analysis of performance of the same ones. Several can be the metric ones used in this analysis: time of execution, efficiency in the use of the processing elements, scalability of the application with respect to the increase in the number of processors or to the increase of the instance of the treat problem. The establishment of models or mechanisms that allow this analysis can be a task sufficiently complicated considering parameters and involved degrees of freedom in the implementation of the parallel application. An joined alternative has been the use of collection tools and visualization of performance data, that allow the user to identify to points of strangulation and sources of inefficiency in an application. For an efficient visualization one becomes necessary to identify and to collect given relative to the execution of the application, stage this called instrumentation. In this work it is presented, initially, a study of the main techniques used in the collection of the performance data, and after that a detailed analysis of the main available tools is made that can be used in architectures parallel of the type to cluster Beowulf with Linux on X86 platform being used libraries of communication based in applications MPI - Message Passing Interface, such as LAM and MPICH. This analysis is validated on applications parallel bars that deal with the problems of the training of neural nets of the type perceptrons using retro-propagation. The gotten conclusions show to the potentiality and easinesses of the analyzed tools.

CAD e engenharia reversa como ferramentas de auxílio na fabricação de cartuchos para próteses ortopédicas

The manufacturing of above and below-knee prosthesis starts by taking surfac measurements of the patient s residual limb. This demands the making of a cartridg with appropriate fitting and customized to the profile of each patient. The traditiona process in public hospitals in Brazil begins with the completion of a record file (according to law nº388, of July 28, 1999 by the ministry of the health) for obtaining o the prosthesis, where it is identified the amputation level, equipment type, fitting type material, measures etc. Nowadays, that work is covered by the Brazilian Nationa Health Service (SUS) and is accomplished in a manual way being used commo measuring tapes characterizing a quite rudimentary, handmade work and without an accuracy.In this dissertation it is presented the development of a computer integrate tool that it include CAD theory, for visualization of both above and below-knee prosthesis in 3D (i.e. OrtoCAD), as well as, the design and the construction a low cos electro-mechanic 3D scanner (EMS). This apparatus is capable to automatically obtain geometric information of the stump or of the healthy leg while ensuring smalle uncertainty degree for all measurements. The methodology is based on reverse engineering concepts so that the EMS output is fed into the above mentioned academi CAD software in charge of the 3D computer graphics reconstruction of the residualimb s negative plaster cast or even the healthy leg s mirror image. The obtained results demonstrate that the proposed model is valid, because it allows the structura analysis to be performed based on the requested loads, boundary conditions, material chosen and wall thickness. Furthermore it allows the manufacturing of a prosthesis cartridge meeting high accuracy engineering patterns with consequent improvement in the quality of the overall production process

Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro

This work presents the results, analyses and conclusions about a study carried out with objective of minimizing the thermal cracks formation on cemented carbide inserts during face milling. The main focus of investigation was based on the observation that milling process is an interrupted machining process, which imposes cyclic thermal loads to the cutting tool, causing frequent stresses changes in its superficial and sub-superficial layers. These characteristics cause the formation of perpendicular cracks from cutting edge which aid the cutting tool wear, reducing its life. Several works on this subject emphasizing the thermal cyclic behavior imposed by the milling process as the main responsible for thermal cracks formation have been published. In these cases, the phenomenon appears as a consequence of the difference in temperature experienced by the cutting tool with each rotation of the cutter, usually defined as the difference between the temperatures in the cutting tool wedge at the end of the cutting and idle periods (T factor). Thus, a technique to minimize this cyclic behavior with objective of transforming the milling in an almost-continuous process in terms of temperature was proposed. In this case, a hot air stream was applied into the idle period, during the machining process. This procedure aimed to minimize the T factor. This technique was applied using three values of temperature from the hot air stream (100, 350 e 580 oC) with no cutting fluid (dry condition) and with cutting fluid mist (wet condition) using the hot air stream at 580oC. Besides, trials at room temperature were carried out. Afterwards the inserts were analyzed using a scanning electron microscope, where the quantity of thermal cracks generated in each condition, the wear and others damages was analyzed. In a general way, it was found that the heating of the idle period was positive for reducing the number of thermal cracks during face milling with cemented carbide inserts. Further, the cutting fluid mist application was effective in reducing the wear of the cutting tools.

A engenharia simultânea e o perfil da indústria de confecção da grande Natal/RN utilizando as ferramentas CAD/PDM e ERP

This work presents the research carried through in the industrial segment of confection of clothes of the Great Natal whose objective is to show the profile, enterprise and technological management as also the use of simultaneous engineering in the development of products. The research approaches two studies. The first one presents the current picture of the companies, synthesized through twelve variable. As, through fifteen variable it shows to the level of use of Simultaneous Engineering in the Development of Products and its amplitude in relation to the Integrated Management using tools CAD, PDM and ERP (Computer Aided Design, Product Management Date, Enterprise Resource Planning). The integration of these systems acts aiming the reduction of the cost and the development time of products. The reached results indicate that simultaneous engineering is a competitive advantage and becomes possible: to reduce the life cycle of the product, to rationalize the resources, to incorporate one high standard of the quality to the process and product as well as to personalize the product to take care of the global market. It is important to note that this work also is considered to contribute for the better understanding of the real companies situation of confection located at the Great Natal and its role in the economy of the State of the Rio Grande do Norte

Desenvolvimento de um núcleo versátil e integrado de ferramentas CAD/CAE para a modelagem e simulação de peças mecânicas

Currently there is still a high demand for quality control in manufacturing processes of mechanical parts. This keeps alive the need for the inspection activity of final products ranging from dimensional analysis to chemical composition of products. Usually this task may be done through various nondestructive and destructive methods that ensure the integrity of the parts. The result generated by these modern inspection tools ends up not being able to geometrically define the real damage and, therefore, cannot be properly displayed on a computing environment screen. Virtual 3D visualization may help identify damage that would hardly be detected by any other methods. One may find some commercial softwares that seek to address the stages of a design and simulation of mechanical parts in order to predict possible damages trying to diminish potential undesirable events. However, the challenge of developing softwares capable of integrating the various design activities, product inspection, results of non-destructive testing as well as the simulation of damage still needs the attention of researchers. This was the motivation to conduct a methodological study for implementation of a versatile CAD/CAE computer kernel capable of helping programmers in developing softwares applied to the activities of design and simulation of mechanics parts under stress. In this research it is presented interesting results obtained from the use of the developed kernel showing that it was successfully applied to case studies of design including parts presenting specific geometries, namely: mechanical prostheses, heat exchangers and piping of oil and gas. Finally, the conclusions regarding the experience of merging CAD and CAE theories to develop the kernel, so as to result in a tool adaptable to various applications of the metalworking industry are presented

Análise da bacia hidrográfica do Rio Punaú-Rio Grande do Norte utilizando ferramentas de geoprocessamento

Provide data and information on watershed becomes important since the knowledge of their physical characteristics, land use, etcetera, allows for better planning and sustainable use of economically, socially and environmentally in this area. The investigation of the physical environment has been commonly given with the use of geoprocessing, which has proved a very efficient tool. Within this context, this research aims at analyzing the river basin Punaú (located in the cities of Touros, Rio do Fogo and Pureza, state of Rio Grande do Norte) in several aspects, using geoprocessing as a tool of work, to provide information about the entire watershed. Specifically, this study aimed to update pre-existing maps, such as geological, geomorphological and land use, generating map of environmental vulnerability, under the aspect of erosion susceptibility of the area, generating map of legal incompatibility, identifying areas that are already being employed in breach of environmental legislation; propose solutions to the occupation of the river basin Punaú, focused on environmental planning. The methodology was based on the use of geoprocessing tools for data analysis and to make maps of legal incompatibility and environmental vulnerability. For the first map was taken into account the environmental legislation regarding the protection of watersheds. For the vulnerability analysis, the generated map was the result of crossing the maps of geology, geomorphology, soils and land use, having been assigned weights to different attributes of thematic maps, generating a map of environmental vulnerability in relation to susceptibility to erosion. The analysis results indicate that agriculture is the most significant activity in the basin, in total occupied area, which confers a high degree of environmental vulnerability in most of the basin, and some agricultural areas eventually develop in a manner inconsistent with Brazilian environmental legislation. It is proposed to consider deploying a measure of revitalization of the watershed in more critical areas and conservation through mitigation measures on the causes of environmental degradation, such as protection of water sources, protection and restoration of riparian vegetation, protection of permanent preservation areas, containment of erosion processes in general, and others listed or not in specific laws, and even the establishment of a committee of basins in the area

Floração precoce em cana-de-açúcar - um estudo utilizando ferramentas de análise in silico e proteômica

Sugarcane is one of the most important products of the world and Brazil is responsible for 25 % of the world production. One problem of this culture at northeast of Brazil is the early flowering. In our laboratory, it has been made before four subtractive libraries using early and late flowering genotypes in order to identify messages related to the flowering process. In this work, two cDNAs were chosen to make in silico analysis and overexpression constructs. Another approach to understand the flowering process in sugarcane was to use proteomic tools. First, the protocol for protein extraction using apical meristem was set up. After that, these proteins were separated on two bidimensional gels. It was possible to observe some difference for some regions of these gels as well as some proteins that can be found in all conditions. The next step, spots will be isolated and sequence on MS spectrometry in order to understand this physiological process in sugarcane

Uso de ferramentas por macacos-prego em manguezais

The present study discusses the geographical distribution and the context on the occupation of mangrove swamp areas by capuchin monkeys. In addition, we assess how the dispersion to the mangrove allowed the exploration of different food items, permitting the development of predation by ambush and the use of cracking tools. From 2004 to 2008 we surveyed the main estuaries of Brazilian Amazon coast, from northeastern state of Pará to the eastern boundary of the state of Maranhão, and recorded the presence of two species of capuchin monkeys in the mangrove forest areas. Cebus apella has been widely distributed in the mangrove at the estuaries examined (excluding C. libidinosus areas). Its presence is often related to Amazon forest remnants in the neighbourhood of the mangrove swamps and thus it is possible that some groups live in both kinds of habitats. However, we recorded some populations restricted only to mangrove swamp surrounded by open areas. On the other hand, Cebus libidinosus had a distribution more restricted and isolated in mangroves. Its pattern of habitat use is consistent with geographic distribution in mangrove patches. It seems that the possible contact zone previously proposed in the literature for that two species has no evident barriers in the mangrove. Furthermore, we record cracking sites and systematic observations on the tool use, carnivory and predation by ambush in Cebus libidinosus from 2006 to 2008. Cebus libidinosus is the only Neotropical primate species in which the tool use has been systematically recorded in nature. However all previous studies had been obtained is open areas (Cerrado and Caatinga). Thus, the present study is first one to report that behaviour in forested habitats in which the tool use to cracking by capuchin monkeys is associated with the consumption of meat. In the Caatinga and Cerrado, food shortages and terrestriality has been proposed by different authors to explain the evolution of tool use in primates. Here, we analyzed the relative contribution of these two variables as selective pressures for the tool use by capuchin monkeys in the mangrove forests, an ecological scenario in which food resources is available around the year and terrestriality is limited by structural habitat features, as the presence of stilt roots and muddy soil

Estudo da organização funcional do sistema circadiano por meio de ferramentas computacionais e matemáticas

Circadian rhythms are variations in physiological processes that help living beings to adapt to environmental cycles. These rhythms are generated and are synchronized to the dark light cycle through the suprachiasmatic nucleus. The integrity of circadian rhythmicity has great implication on human health. Currently it is known that disturbances in circadian rhythms are related to some problems of today such as obesity, propensity for certain types of cancer and mental disorders for example. The circadian rhythmicity can be studied through experiments with animal models and in humans directly. In this work we use computational models to gather experimental results from the literature and explain the results of our laboratory. Another focus of this study was to analyze data rhythms of activity and rest obtained experimentally. Here we made a review on the use of variables used to analyze these data and finally propose an update on how to calculate these variables. Our models were able to reproduce the main experimental results in the literature and provided explanations for the results of experiments performed in our laboratory. The new variables used to analyze the rhythm of activity and rest in humans were more efficient to describe the fragmentation and synchronization of this rhythm. Therefore, the work contributed improving existing tools for the study of circadian rhythms in mammals

Ferramentas quimiométricas aplicadas a classificação de amostras de leite em pó e quantificação de proteínas

In this work we used chemometric tools to classify and quantify the protein content in samples of milk powder. We applied the NIR diffuse reflectance spectroscopy combined with multivariate techniques. First, we carried out an exploratory method of samples by principal component analysis (PCA), then the classification of independent modeling of class analogy (SIMCA). Thus it became possible to classify the samples that were grouped by similarities in their composition. Finally, the techniques of partial least squares regression (PLS) and principal components regression (PCR) allowed the quantification of protein content in samples of milk powder, compared with the Kjeldahl reference method. A total of 53 samples of milk powder sold in the metropolitan areas of Natal, Salvador and Rio de Janeiro were acquired for analysis, in which after pre-treatment data, there were four models, which were employed for classification and quantification of samples. The methods employed after being assessed and validated showed good performance, good accuracy and reliability of the results, showing that the NIR technique can be a non invasive technique, since it produces no waste and saves time in analyzing the samples

Estudo da potencialidade da espectroscopia de infravermelho próximo na análise de cabelo utilizando ferramentas quimiométricas para diferenciar fumantes de não fumantes

This paper investigates the potential of near infrared spectroscopy (NIR) for forensic analysis of human hair samples in order to differentiate smokers from nonsmokers, using chemometric modeling as an analytical tool. We obtained a total of 19 hair samples, 9 smokers and 10 nonsmokers varying gender, hair color, age and duration of smoking, all collected directly from the head of the same great Natal-RN. From the NIR spectra obtained without any pretreatment of the samples was performed an exploratory multivariate chemical data by applying spectral pretreatments followed by principal component analysis (PCA). After chemometric modeling of the data was achieved without any experimental data beyond the NIR spectra, differentiate smokers from nonsmokers, by demonstrating the significant influence of tabacco on the chemical composition of hair as well as the potential of the methodology in forensic identification