Análise do impacto do sombreamento vegetal no conforto termo-luminoso em edificações no clima quente e úmido

Este trabalho visa analisar o potencial do sombreamento vegetal no edifício para promover conforto térmico, luminoso e eficiência energética, a partir de simulações computacionais nos softwares DesignBuilder e Daysim. Foram simuladas diferentes combinações de fator de céu visível (FCV), transparência da copa vegetal e percentual de abertura da fachada (PAF) para edificação residencial térrea em Nata/RN, a fim de quantificar os impactos e propor recomendações projetuais. Os modelos foram analisados por meio do método de conforto adaptativo indicado pela ASHRAE Standard 55 (ASHRAE, 2010), classificação do nível de eficiência energética do Regulamento Técnico da Qualidade para o Nível de Eficiência Energética de Edificações Residenciais (RTQ-R), resultados de Daylight autonomy (DA) e uniformidade da luz natural para as exigências lumínicas de 100-300-500 lux. Os resultados demonstram grande potencial para integração da vegetação na edificação, principalmente para os fatores de céu médio e grande, e falta de coerência do RTQ-R para classificar as edificações da Zona bioclimática 08 pelo método de simulação.

Obtenção e caracterização de um compósito de matriz polimérica com carga de resíduos vegetal proveniente do sabugo de milho

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m³ for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.

Obtenção e caracterização de um compósito de matriz polimérica com carga de resíduos vegetal proveniente do sabugo de milho

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m³ for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.

Obtenção e caracterização de um compósito de matriz polimérica com carga de bucha vegetal luffa cylindrica

Composite materials arise from the need for lighter materials and with bigger mechanical and thermal resistance. The difficulties of discard, recycling or reuse are currently environmental concerns and, therefore, they are study object of much researches. In this perspective the feasibility of using loofahs (Luffa Cylindrica) for obtainment of a polymeric matrix composite was studied. Six formulations, with 4, 5 and 6 treated layers and untreated, were tested. The loofahs were treated in boiling water to remove lignins, waxes and impurities present in the fibers. After that, they were dried in a direct exposure solar dryer. For the characterization of the composite, thermal (thermal conductivity, thermal capacity, thermal diffusivity and thermal resistivity), mechanical (tensile and bending resistance) and physicochemical (SEM, XRD, density, absorption and degradation) properties were determined. The proposed composite has as advantage the low fiber density, which is around 0.66 g/cm³ (almost half of the polyester resin matrix), resulting in an average composite density of around 1.17g/cm³, 6.0 % lower in relation to the matrix. The treatment carried out in the loofahs increased the mechanical strength of the composite and decreased the humidity absorption. The composite showed lower mechanical behavior than the matrix for all the formulations. The composite also demonstrated itself to be feasible for thermal applications, with a value of thermal conductivity of less than 0.159 W/m.K, ranking it as a good thermal insulator. For all formulations/settings a low adherence between fibers and matrix occurred, with the presence of cracks, showing the fragility due to low impregnation of the fiber by the matrix. This composite can be used to manufacture structures that do not require significant mechanical strength, such as solar prototypes, as ovens and stoves.

Obtenção e caracterização de um compósito de matriz polimérica com carga de bucha vegetal luffa cylindrica

Composite materials arise from the need for lighter materials and with bigger mechanical and thermal resistance. The difficulties of discard, recycling or reuse are currently environmental concerns and, therefore, they are study object of much researches. In this perspective the feasibility of using loofahs (Luffa Cylindrica) for obtainment of a polymeric matrix composite was studied. Six formulations, with 4, 5 and 6 treated layers and untreated, were tested. The loofahs were treated in boiling water to remove lignins, waxes and impurities present in the fibers. After that, they were dried in a direct exposure solar dryer. For the characterization of the composite, thermal (thermal conductivity, thermal capacity, thermal diffusivity and thermal resistivity), mechanical (tensile and bending resistance) and physicochemical (SEM, XRD, density, absorption and degradation) properties were determined. The proposed composite has as advantage the low fiber density, which is around 0.66 g/cm³ (almost half of the polyester resin matrix), resulting in an average composite density of around 1.17g/cm³, 6.0 % lower in relation to the matrix. The treatment carried out in the loofahs increased the mechanical strength of the composite and decreased the humidity absorption. The composite showed lower mechanical behavior than the matrix for all the formulations. The composite also demonstrated itself to be feasible for thermal applications, with a value of thermal conductivity of less than 0.159 W/m.K, ranking it as a good thermal insulator. For all formulations/settings a low adherence between fibers and matrix occurred, with the presence of cracks, showing the fragility due to low impregnation of the fiber by the matrix. This composite can be used to manufacture structures that do not require significant mechanical strength, such as solar prototypes, as ovens and stoves.

Avaliação do banco de dissertações e teses da associação brasileira de antropologia: uma análise cienciométrica

VITULLO, Nadia Aurora Vanti. Avaliação do banco de dissertações e teses da Associação Brasileira de Antropologia: uma análise cienciométrica. 2001. 143 f. Dissertaçao (Mestrado) - Curso de Mestrado em Biblioteconomia e Ciência da Informação, Pontifícia Universidade Católica de Campinas, Campinas, 2001.

Biblioteca digital de teses e dissertaçoes: uma referência fundamental

OLIVEIRA, Raimundo Muniz de. Biblioteca digital de teses e dissertaçoes: uma referencia fundamental. In: CINFORM ENCONTRO NACIONAL DE ENSINO E PESQUISA DA INFORMAÇAO,HUMANISMO E DESENVOLVIMENTO CIENTIFICO E TECNOLOGICO,7.,2007,Salvador. Anais...Salvador:UFBA, 2007.Disponivel em:www.cinform.ufba.br>. Acesso em: 27 set. 2007. Acesso em: 27 set. 2010.

Bibblioteca Digital de Teses e Dissertações: uma estratégia de preservação digital

CUNHA, Jacqueline de Araújo. Biblioteca Digital de Teses e Dissertações: uma estratégia de preservação da memória científica. 2009. 141f. Dissertação (Mestrado)- Programa de Pós-Graduação em Ciência da Informação. Universidade Federal da Paraíba, João Pessoa, 2009.

Biblioteca Digital de Teses e Dissertações: grau de utilização pelos mestrandos do curso de Ciência da Informação das Universidades Públicas Brasileiras

A pesquisa aborda o uso das Tecnologias de Informação e Comunicação, que vem revolucionando as atividades e ocasionando muitas mudanças relacionadas ao acesso e uso de informações. O objetivo foi analisar o grau de utilização do conhecimento científico produzido pelos Programas de Pós-Graduação das Universidades Públicas Brasileiras, através da BDTD, pelos mestrandos dos referidos programas. Nos procedimentos metodológicos realizados, procurou-se inicialmente analisar o amplo espectro da população do corpus da pesquisa. Em razão da impossibilidade de trabalhar com os Programas de Pós-Graduação como um todo, optou-se por fazer um recorte, elegendo os cursos de Pós-Graduação em Ciência da Informação, vez que estes representam o principal segmento social de interesse da pesquisa. Foi utilizado o método de estudo de usuários, onde se optou por adotar o grupo, “estudos orientados aos usuários”, que identifica as necessidades e comportamento de acesso e uso da informação. Para coletar os dados, elaborou-se um questionário semi-estruturado com 25 questões, que versavam sobre o uso, dificuldades de acesso e recuperação da informação, bem como a satisfação na utilização dessa fonte informacional. Dentre os vários resultados obtidos, podemos destacar o fato de que a maioria dos mestrandos (71,8%) só teve contato com a BDTD somente no momento em que se encontrava cursando o mestrado e, somente 24,3%, tiveram contato durante a graduação. Estes resultados representam um problema, que pode afetar o bom desempenho do projeto BDTD, o qual consiste em disseminar e divulgar a produção científica dos Programas de Pós-Graduação das Universidades Públicas Brasileiras para a sua comunidade. Foi observado também, que os mestrandos oriundos do curso de Biblioteconomia tende a ter contato com a BDTD bem mais cedo do que mestrandos de outros cursos de graduação. A fim de minimizar o problema detectado, propõe-se uma divulgação mais eficaz na graduação através de dois procedimentos: Primeiro, o docente deve fazer uma divulgação mais eficaz da BDTD junto aos discentes de todos os cursos de graduação; segundo: deverá ser feita a divulgação na mídia eletrônica, através da inserção de ícones da BDTD, nos portais dos Departamentos dos Cursos de Graduação das Universidades Públicas Brasileiras. Acredita-se que com estes procedimentos seja possível aperfeiçoar o uso dessa fonte de informação científica.

Bibliotecas digitais de teses e dissertações brasileiras: paradigma do acesso livre à informação científica

A evolução da comunicação científica ao longo do tempo e o impacto causado pela A evolução da comunicação científica ao longo do tempo e o impacto causado pela A evolução da comunicação científica ao longo do tempo e o impacto causado pela se analisar as contribuições da Biblioteca Digital de Teses e Dissertações (BDTD)para a comunicação científica atual, destacando possibilidades emergentes e desafios a serem superados. Apresenta uma breve evolução da comunicação científica ao longo do tempo; discute os impactos causados pela Internet na comunicação, disponibilização e acessibilidade de informações técnico-científicas; e caracteriza BDTD destacando os desafios a serem superados. Dentre eles estão, a questão dos direitos autorais que ocasionam a baixa adesão dos autores ao projeto piloto do IBICT para disponibilizar teses e dissertações no meio eletrônico. Para este desafio, são apontadas sugestões.

Panorama brasileiro das bibliotecas digitais de teses e dissertações

As bibliotecas de teses e dissertações têm um papel fundamental para o desenvolvimento científico e cultural de um país. Nesse sentido, buscou-se, de modo geral, analisar o panorama brasileiro das bibliotecas digitais de teses e dissertações. Especificamente, objetivou-se caracterizar a sociedade da informação enquanto contexto das BDTD; caracterizar os vários tipos de bibliotecas surgidos a partir da inserção das novas tecnologias de informação e comunicação; identificar as diretrizes norteadoras da implantação de BDTD; e levantar as BDTD existentes no Brasil. Para tato, além de levantamento bibliográfico, realizou-se uma pesquisa nos sites de instituições de ensino superior brasileiras que já dispõe de bibliotecas digitais de teses e dissertações em funcionamento. A análise e interpretação destes dados nos permite considerar que no Brasil as BDTD encontram-se num estágio embrionário, sendo relevante pesquisar a histórica implantação e configuração desse novo modelo de biblioteca.

Da bancada ao Bureau: análise do desenvolvimento da biotecnologia no Nordeste Brasileiro sob o enfoque de Sistema Regional de Inovação

The starting point of the present work consisted of investigating the development of biotechnology in the Northeast region of Brazil from the perspective of a Regional Innovation System (RIS). The theoretical framework adopted relied on the approaches and concepts presented by the Neo-Schumpeterian perspective. This framework was chosen because, by means of the Innovation System concept, this literature allows us to analyze the relationships and configurations of actors, as well as the role of the state and of social, science and technology, and economic policies in the studied region. The analysis considered four selected dimensions: physical infrastructure, human capital, scientific production, and funding. These variables were chosen because they allow us to verify the possibilities and limitations of developing a biotechnology RIS in the Northeast of Brazil, and these elements would help in answering the question behind this dissertation. The location of the physical infrastructure was determined by means of bibliographic and documental research and interviews with heads of institutions that do biotechnology research. Regarding human capital, the analysis focused on resource training in biotechnology, highlighting graduate courses and research groups in the area. To measure knowledge production, we delimited scientific collaboration among researchers in the field of biotechnology as the focus of this category. For the funding dimension, information was gathered from reports available at the websites of national and state funding agencies. The data was analyzed through method triangulation, involving quantitative and qualitative research stages. To back the analyses, we revisited the integration policies in the area of Science, Technology and Innovation. Our analysis has shown that these policies play a crucial role in the development of biotechnology in the region being studied. The data revealed that the physical infrastructure is concentrated in only three states (Bahia, Ceará, and Pernambuco). In this regard, the Northeast Biotechnology Network (Renorbio) stands out as a strategic actor, enabling states with poor infrastructure to develop research through partnerships with institutions located in another state. We have also verified that the practices involving human resource training and knowledge production are factors that enable the emergence of a regional system for biotechnology in the studied region. As limitations, we have verified the low immersion level of regional actors, the heterogeneity of socioeconomic indicators, the lack of financial resources, and a low innovation culture in the business sector. Overall, we have concluded that the development of a Regional Innovation System in Biotechnology, based on the current regional dynamics, depends on an effective change in the behavior of the social agents involved, both in the national and regional dimensions as well as in the public and private spheres

Avaliação da espécie vegetal Croton cajucara Benth como inibidor de biocorrosão em aço carbono Aisi 1020

Actually in the oil industry biotechnological approaches represent a challenge. In that, attention to metal structures affected by electrochemical corrosive processes, as well as by the interference of microorganisms (biocorrosion) which affect the kinetics of the environment / metal interface. Regarding to economical and environmental impacts reduction let to the use of natural products as an alternative to toxic synthetic inhibitors. This study aims the employment of green chemistry by evaluating the stem bark extracts (EHC, hydroalcoholic extract) and leaves (ECF, chloroform extract) of plant species Croton cajucara Benth as a corrosion inhibitor. In addition the effectiveness of corrosion inhibition of bioactive trans-clerodane dehydrocrotonin (DCTN) isolated from the stem bark of this Croton was also evaluated. For this purpose, carbon steel AISI 1020 was immersed in saline media (3,5 % NaCl) in the presence and absence of a microorganism recovered from a pipeline oil sample. Corrosion inhibition efficiency and its mechanisms were investigated by linear sweep voltammetry and electrochemical impedance. Culture-dependent and molecular biology techniques were used to characterize and identify bacterial species present in oil samples. The tested natural products EHC, ECF and DCTN (DMSO as solvent) in abiotic environment presented respectively, corrosion inhibition efficiencies of 57.6% (500 ppm), 86.1% (500 ppm) and 54.5% (62.5 ppm). Adsorption phenomena showed that EHC best fit Frumkin isotherm and ECF to Temkin isotherm. EHC extract (250 ppm) dissolved in a polar microemulsion system (MES-EHC) showed significant maximum inhibition efficiency (93.8%) fitting Langmuir isotherm. In the presence of the isolated Pseudomonas sp, EHC and ECF were able to form eco-compatible organic films with anti-corrosive properties