Controle profissional de biofilme dentário como estratégia para manutenção da saúde periodontal de pacientes com aparelho ortodôntico fixo: análise comparativa entre diferentes períodos

The presence of fixed orthodontics appliances interfere on sanitation, allowing periodontal diseases to appear, despite the fact patients keep on visiting the dentist every month. This research aims to determine a protocol for the mechanical control of the dental biofilm performed by the professional. A protocol that was able to maintain the periodontal health of the patients under orthodontic treatment with fixed appliances, and in order to do so, it used a non-controlled, randomized and blind clinical essay. The sample involved 40 adolescents who were under the installation of fixed orthodontics appliances and it was divided in three groups, as follows: monthly controlled group (group 1) composed of 11 patients, the quarterly controlled group (group 2) with 16 patients and the semestrial controlled group (group 3) with 13 patients. For data collection, an interview and clinical exams with probing depth measurement, quantity of keratinized mucosa, Gingival Index and the Plaque Index were used. On the initial exam all patients received brushing guidelines as well as the professional control of dental biofilm, with periodontal scaler, Robinson s brush and prophylactic paste. However, Group 1 returned every month for control procedures; Group 2 every three months and Group 3 after six months. The intervention had a six-month duration (for all the three groups), when all the exams were repeated by another examiner who did not know which group each patient was inserted in. Finally, the research concluded that despite the fact there is no statistically significant difference among the three groups, clinically the patients from the monthly group presented a better response to professional control, with less accumulation of dental biofilm and less rate of gingival inflammation. Thus, the mechanical control of the dental biofilm performed by the professional could not avoid gingival increase, characterized by the raise of probing depth measurement, neither the quantity of keratinized mucosa

A influência da criopreservação nas células mesenquimais indiferenciadas do ligamento periodontal de humanos análise comparativa in vitro

Cryopreservation is a process where cells or biological tissues are preserved by freezing at very low temperatures and aims to cease reversibly, in a controlled manner, all the biological functions of living tissues, i.e., maintain cell preservation so that it can recover with high degree of viability and functional integrity. This study aimed to evaluate the influence of cryopreservation on the mesenchymal stem cells originating from the periodontal ligament of human third molars by in vitro experiments. Six healthy teeth were removed and the periodontal cells grown in culture medium containing α-MEM supplemented with antibiotics and 15% FBS in a humidified atmosphere with 5% CO2 at 37° C. Cells isolated from each sample were divided into two groups: Group I - immediate cell culture (not fresh cryopreserved cells) and Group II - cell cryopreservation, during a period of 30 days. Analyses of rates of cell adhesion and proliferation in different groups were performed by counting the cells adhered to the wells, in intervals of 24, 48 and 72 hours after the start of cultivation. The number of cells in each well was obtained by counting viable cells with the use of hemocytometer and the method of exclusion of cells stained by trypan blue. The difference between groups for each of the times was analyzed by Wilcoxon test. Regarding the temporal evolution for each group, analysis was done by Friedman's test to verify the existence of differences between times and, when it existed, the Wilcoxon penalty was applied. The results showed no statistically significant difference between the two groups analyzed in this study. Therefore, we conclude that the cryopreservation process, after a period of 30 days, did not influence the cell type studied, and there was no difference in growth capacity in vitro between the groups

Análise comparativa da imunoexpressão das proteínas hmlh1 e hmsh2 em carcinomas epidermóides de lábio inferior e queilites actínicas com graus variados de displasia

Lip squamous cell carcinoma (SCC) may develop from a premalignant condition, actinic cheilitis (AC) in 95% of the cases. Both premalignant and neoplastic lip diseases are caused mainly by chronic exposure to the ultraviolet component of solar radiation, especially UVB. This exposure causes disruption of the cell cycle and damage to DNA repair systems, like mismatch repair, altering proteins repair as hMLH1 and hMSH2. This research aimed to investigate the immunohistochemical expression of hMLH1 and hMSH2 proteins in lower lip SCCs and ACs, providing additional information about carcinogenesis of the lower lip. The sample consisted 40 cases of ACs and 40 cases of lower lip SCCs. Histological sections of 3 μm were submitted to immunoperoxidase method, for immunohistochemical analysis of lesions were counted in 1000 cells (positive and negative), data were evaluated both in absolute numbers and percentage of immunostained cells, the latter by assigning scores. Associations of the variables and comparative analysis of biomarker expression were performed by Fisher s exact and Pearson s chi-square, "t" student, one-way ANOVA, Mann- Whitney e Kruskal-Wallis tests. The level of significance was 5%. It was found that, in lower lip SCC, the mean of the proteins was higher in female patients (hMLH1= 369,80 + 223,98; hMHS2 = 534,80 + 343,62), less than 50 years old (hMLH1 = 285,50 + 190,65; hMHS2 = 540,00 + 274,79) and classified as low-grade malignancy (hMLH1 = 264,59 + 179,21; hMHS2 = 519,32 + 302,58), in these data only to sex, for hMLH1 protein, was statistically significant (p=0.034). Comparing the different lesions, we observed that for both hMLH1 and hMSH2 protein, the average of positive epithelial cells decreased as the lesion was graded at later stages. The ACs classified without dysplasia or mild dysplasia had the highest average of immunostained cells (hMLH1 = 721.23 + 88.116; hMHS2 = 781.50 + 156.93). The ACs classified as moderate or severe dysplasia had intermediate values (hMLH1 = 532,86 + 197,72; hMHS2 = 611,14 + 172,48) and SSCs of the lower lip had the lowest averages (hMLH1 = 255,03 + 199,47; hMHS2 = 518,38 + 265,68). There was a statistically significant difference between groups (p<0.001). In conclusion, our data support the hypothesis that changes in immunoexpression of these proteins is related to the process of carcinogenesis of the lower lip

Análise comparativa na influência da técnica de moldagem funcional em arcos parcialmente edêntulos sobre os pontos de contato oclusais, a integridade da fibromucosa e a extensão da base da prótese

There is a lack of clinical studies evaluating techniques of functional impression for partially edentulous arches. The aim of this double-blind non-randomized controlled clinical trial was to compare the efficacy of altered cast impression (ACI) and direct functional impression (DFI) techniques. The efficacy was evaluated regarding the number of occlusal units on denture teeth, mucosa integrity at 24-hour follow-up and denture base extension. The sample included 51 patients (female and male) with mean age of 58.96 years treated at Dental Department of UFRN. The patients, exhibiting edentulous maxilla and mandibular Kennedy class I, were divided into two groups (group ACI, n=29; group DFI, n=22). Clinical evaluation was based on the number of occlusal units on natural and/or artificial teeth, mucosa integrity at 24-hour follow-up, and denture base extension. Statistical analysis was conducted using the software SPSS 17.0® (SPSS Inc., Chicago, Illinois). Student T-test was used to reveal association between number of occlusal units and impression technique while chi-square test showed association between mucosa integrity and impression technique. Fischer s exact test was applied for association between denture base extension and impression technique at 95% level of significance. No significant difference was observed between the groups regarding number of occlusal units, mucosa integrity and denture base extension. The altered cast technique did not provide significant improvement in comparison to the direct technique when the number of occlusal units, mucosa integrity and denture base extension

Uma Análise Comparativa entre Sistemas de Combinação de Classificadores com Distribuição Vertical dos Dados

In systems that combine the outputs of classification methods (combination systems), such as ensembles and multi-agent systems, one of the main constraints is that the base components (classifiers or agents) should be diverse among themselves. In other words, there is clearly no accuracy gain in a system that is composed of a set of identical base components. One way of increasing diversity is through the use of feature selection or data distribution methods in combination systems. In this work, an investigation of the impact of using data distribution methods among the components of combination systems will be performed. In this investigation, different methods of data distribution will be used and an analysis of the combination systems, using several different configurations, will be performed. As a result of this analysis, it is aimed to detect which combination systems are more suitable to use feature distribution among the components

Análise comparativa da tendência na mortalidade infantil em áreas cobertas e não cobertas pela estratégia saúde da família no município de Garanhuns entre 2003 e 2012

A mortalidade infantil é tida como um indicador sensível para descrever as condições de vida e de saúde de uma população, sendo, portanto, interpretada como a estimativa do risco de um nascido vivo morrer antes de completar o primeiro ano de vida. Esse indicador é considerado elevado quando atinge patamares superiores a 50/1.000 nascidos vivos, médios quando se encontra entre 20 e 49/1.000 e mais baixos quando está até 20/1.000. No Brasil, a Mortalidade Infantil tem evidenciado variações ao longo dos anos, e nas duas últimas décadas esse indicador tem sofrido um acentuado decréscimo, provavelmente devido à melhoria no acesso aos serviços de saúde, ao saneamento básico, redução da taxa de fecundidade, melhoria das condições de vida e implementação de tecnologias na atenção à saúde. O objetivo principal do estudo foi avaliar a tendência na mortalidade infantil no município de Garanhuns no período de 2003 a 2012, segundo áreas cobertas e não cobertas pela estratégia saúde da família. Foi realizado um estudo de série temporal, e para isso foram coletados os dados referentes aos nascidos vivos e óbitos de menores de 01 (um) ano através do Sistema de Informações de Atenção Básica – SIAB, nas áreas cobertas e não cobertas pela estratégia, a fim de estabelecer relação de possível causalidade entre a intervenção e o indicador. Os resultados foram apresentados em gráficos, com a curva da Mortalidade Infantil no município de Garanhuns entre os anos de 2003 e 2012 segmentado através das áreas cobertas e não cobertas pela estratégia saúde da família ao longo do mesmo período. Após a análise dos resultados, observou-se uma tendência de queda no coeficiente de mortalidade infantil tanto nas áreas cobertas pela estratégia saúde da família quanto nas áreas cobertas pelo PACS, e que não foi possível estabelecer isoladamente uma maior redução da mortalidade infantil em áreas cobertas pela estratégia. No entanto, os resultados das ações desenvolvidas pela estratégia saúde da família são consistentes e plausíveis de causar impacto no declínio da mortalidade infantil, sobretudo as ações voltadas para a saúde da mulher e da criança

Análise comparativa da imunoexpressão de GLUT-1, GLUT-3 e M-CSF em lesão periférica e central de células gigantes

The peripheral giant cell lesion ( PG CL ) and the central giant cell lesion ( CGC L) are lesions histologically similar affecting the head and neck region . The study aimed to analyze the immunohistochemical expression of markers GLUT - 1 , GLUT - 3 and M - CSF in a series of cases of PGCL and CGCL , in trying to understand the different biological behavior of these pathologies . The sample consisted of 20 tissue specimens of PGCL 20 central lesion of not aggressive giant cell ( CLNAGC) and 20 central lesi on of aggressive giant cell ( CLAGC), coming from the Pathology Unit of Oral Pathology of the Department of Dentistry of UFRN . W as performed the s emi - quantitative and qualitative analysis of immunohistochemical expression of the markers in giant cells and m ononuclear cells . In relation to the GLUT - 1, it was found a statistically significant difference (p < 0.05) in the number of mononuclear cells immunomarked between the PGCL and the CLNAGC and between the PGCL and CLAGC . Regarding the intensity of staining w as also observed a statistically significant difference both at the mononuclear cells as in giant cells between PL and CLNAGC and between PGCL and CLAGC , at the giant cells there was also a statistically significant difference between the CLNAGC and CLAGC . In relation to GLUT - 3 , was found a statistically significant difference between PGCL and CLAGC and between CLAGC and CLNAGC in amount of mononuclear cells immunomarked . Regarding the intensity of labeling for such protein was found a statistically signifi cant difference at the giant cells between PL and CLAGC . To the M - CSF was observed only a statistically significant difference in the intensity of labeling at the mononuclear cells between PGCL and CLNAGC and between PGCL and CLAGC . Based on these results, we can conclude the participation of GLUT - 1, GLUT - 3 and M - CSF in the pathogenesis of the lesions studied. The bigger immunostaining of these proteins in mononuclear cells show that these cells perform a higher metabolic activity and osteoclastogenic, espe cially in CLAGC . It was found that the mononuclear cells were more related to the pathogenesis of the studied lesions than properly the giant s cell s.

Análise comparativa da imunoexpressão do IMP-3 e Ki-67 em queilites actínicas e carcinoma epidermóide de lábio inferior

Epithelial changes observed in actinic cheilitis (AC) and squamous cell carcinoma of the lower lip (LLSCC) are mainly caused by chronic exposure to ultraviolet rays (UV) and are studied using different immunohistochemical markers trying to evaluate the process of carcinogenesis. The objective of this study was to comparatively evaluate the expression of Ki-67 proteins and IMP-3 in AC and LLSCC to contribute with additional information on carcinogenesis in lower lip. A total of 33 cases of AC and 33 cases of LLSCC were studied, analyzed the clinical and pathological features and immunostaining of Ki-67 and IMP-3. Immunohistochemical analysis of Ki-67 was made through the determination of the proliferation index (PI) and subsequent classification of the cases according to the scores: 0 (0% positive cells) +1 (≤30%) + 2 (> 30% and ≤60%) and +3 (> 60%). For statistical tests cases were classified as unmarked (score 0), low expression (score +1) and high expression (scores +2 and +3). For the expression of IMP-3, the percentage of immunostained epithelial cells was established, and assigned scores: 0 (corresponding to 0%), +1 (up to 30% of positive cells); +2 (From 30% to 60% of immunostained cells) and +3 (over 60% of positive cells). Statistical tests chi-square test, Mann-Whitney and Wilcoxon were used. The significance level was 5%. Most AC chaos was male (78.8%) with mean age of 50 years and cases of LLSCC also were male (69.89%) with an average of 62 years. The Ki-67 was expressed in all cases of AC and in cases of LLSCC, predominantly in the two injuries the score 2, corresponding to 81.8% of cases in ACs and 54.5% in the CELI. The expression of IMP-3 in ACs occurred in 72.7% of cases, predominantly in 36.3% of LLSCC cases score 1. Already in the IMP-3 was expressed in 60.6% of cases, especially in 27.3% of the score of the cases 3. These results allow us to conclude that the expression of IMP3 and proliferative activity are early events in carcinogenesis independently lower lip state of change.

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

Análise comparativa e teste empírico da validade dos modelos CAPM tradicional e condicional: o caso das ações da Petrobrás

ALVES, Janaína da Silva. Análise comparativa e teste empírico da validade dos modelos CAPM tradicional e condicional: o caso das ações da Petrobrás. Revista Ciências Administrativas, Fotaleza, v. 13, n. 1, p.147-157, ago. 2007.

Análise comparativa entre as propriedades do gesso obtido de rejeito da produção de sal e gesso comerciais

The environmental impacts, caused by the solid residues generation, are an often quoted concern nowadays. Some of these residues, which are originated from different human activities, can be fully reused, reducing the effects of the poor waste management on the environment. During the salt production process, the first formed crystals are discarded as industrial waste. This is mainly made of gypsum that is a calcium sulfate dihydrate (CaSO4.2H2O). The gypsum in question may go through a calcination process due to the plaster (CaSO4.0,5H2O) production and then the application on the cement industry. Considering the necessity of development and application for these industrial wastes, this paper aims to analyze the plaster, called Salgesso, from the gypsum that was generated during the salt production, and its use viability on the civil construction industry in order to create environmental and economical benefits. For characterization, the following experiments were performed: X-ray Fluorescence (XRF), X-ray Diffraction (XRD), thermal analysis (TG/DTG) and Scanning Electron Microscopy (SEM) with EDS. The following tests were also performed to obtain the mechanical characteristics: Thinness Modulus, Unit Mass, Setting Time and Compressive Resistance. Three commercial plasters used on civil construction were taken as references. All of these tests were performed according to the current standards. It was noticed that although there were some conflicting findings between the salt and commercial plasters in all of the studied properties, the Salgesso has its values within the standard limits. However, there is the possibility to improve them by doing a more effective calcination process. Three commercial plasters, used in construction, were used as reference material. All tests were performed according to standards in force. It was observed that although some tests present conflicting findings between the salt and gypsum plasters commercial properties in all of the studied Salgesso have values within the limits imposed by the standard, but can be improved simply by calcination process more effective

Análise comparativa entre simuladores de linha de fluxo e diferenças finitas para um reservatório de petróleo submetido a injeção de água

Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.

Análise dos efeitos da legislação urbanística na formação e crescimento do Bairro de Lagoa Nova: planos diretores de 1974, 1984 e 1994

To Analyze the Managing Plans of Natal in the decades of 1970, 1980 and 1990, identifying elements that had contributed for the growth of the Lagoa Nova quarter, capital one of the Rio Grande do Norte state. Ahead of the sped up growth of the urban centers, many times is not given to analyze which law had taken care of to its objective, and which the imperfections that had appeared during the application of these laws. To make the comparisons in you square them chosen at there distantinct times made possible to analyze the form as the ground of Lagoa Nova absorbed the proposals laws.Therefore toanalyze influences it of the Managing Plans, to make comparatives analyses between the urbanistics condicion, made possible to understand that the fabric urban of the quarter of Lagoa Nova is a true granary of information that it makes possible to the dedicated ones to the urban studies, a true field of analysis

Análise das emissões gasosas de um veículo flex funcionando com diferentes combustíveis

Efforts in research and development of new technologies to reduce emission levels of pollutant gases in the atmosphere has intensified in the last decades. In this context, it can be highlighted the modern systems of electronic engine management, new automotive catalysts and the use of renewable fuels which contributes to reduce the environmental impact. The purpose of this study was a comparative analysis of gas emissions from a automotive vehicle, operating with different fuels: natural gas, AEHC or gasoline. To execute the experimental tests, a flex vehicle was installed on a chassis dynamometer equipped with a gas analyzer and other complementary accessories according to the standard guidelines of emission and security procedures. Tests were performed according to NBR 6601 and NBR 7024, which define the urban and road driving cycle, respectively. Besides the analysis of exhaust gases in the discharge tube, before and after the catalyst, using the suction probe of the gas analyzer to simulate the vehicle in urban and road traffic, were performed tests of fuel characterization. Final results were conclusive in indicating leaded gasoline as the fuel which most contributed with pollutant emissions in atmosphere and the usual gasoline being the fuel which less contributed with pollutant emissions in atmosphere