Peptide-fluorescent bacteria complex as luminescent reagents for cancer diagnosis

Currently in clinic, people use hematoxylin and eosin stain (H&E stain) and immunohistochemistry methods to identify the generation and genre of cancers for human pathological samples. Since these methods are inaccurate and time consuming, developing a rapid and accurate method to detect cancer is urgently demanded. In our study, binding peptides for lung cancer cell line A549 were identified using bacteria surface display method. With those binding peptides for A549 cells on the surface, the fluorescent bacteria (Escherichia coli with stably expressed green fluorescent protein) were served as specific detecting reagents for the diagnosis of cancers. The binding activity of peptide-fluorescent bacteria complex was confirmed by detached cancer cells, attached cancer cells and mice tumor xenograft samples. A unique fixation method was developed for peptide-bacteria complex in order to make this complex more feasible for the clinic use. This peptide-fluorescent bacteria complex has great potential to become a new diagnostic tool for clinical application.

A technique for examination of diagnostic characters of penicillate millipedes

We describe a simple method for examination of penicillate millipedes. The internal tissues are dissolved and the stain Fast Green used to give excellent contrast for dissection and to provide clear visualisation of characters necessary for identification of both freshly collected and museum specimens.

Visible and UV functionality of TiO2 ternary nanocomposites on cotton

This research intends to increase the photocatalytic efficiency of cotton fabrics coated with TiO2-based nanocomposites under illumination particularly visible light. The fabrics were functionalized using a low-temperature sol-gel method of TiO2/Metal/SiO2 nanocomposite systems. Integrating silica and noble metals into TiO2 sol was put forth for boosting its functionality. Three noble metals (gold (Au), platinum (Pt) and silver (Ag)) with four different concentrations were employed. The photocatalytic activity of the functionalized fabrics was assessed through coffee stain-removal test and photodecomposition of methylene blue (MB) under UV and visible light. The impact of coating layers on fabrics' hydrophilicity was analyzed through measuring the water contact angle as well as the water absorption time. The fabrics were characterized using XRD, SEM and EDS. It was corroborated that the presence of silica enhanced the self-stain-removal capability of fabrics under UV. Moreover, the self-cleaning property of fabrics improved under both UV and visible light after integrating the metals into the colloids. In the same line, the self-cleaning activity threshold of fabrics was shifted to visible region.

Confocal laser scanning microscopy elucidation of the micromorphology of the leaf cuticle and analysis of its chemical composition

Electron microscopy techniques such as transmission electron microscopy (TEM) and scanning electron microscopy (SEM) have been invaluable tools for the study of the micromorphology of plant cuticles. However, for electron microscopy, the preparation techniques required may invariably introduce artefacts in cuticle preservation. Further, there are a limited number of methods available for quantifying the image data obtained through electron microscopy. Therefore, in this study, optical microscopy techniques were coupled with staining procedures and, along with SEM were used to qualitatively and quantitatively assess the ultrastructure of plant leaf cuticles. Leaf cryosections of Triticum aestivum (wheat), Zea mays (maize), and Lupinus angustifolius (lupin) were stained with either fat-soluble azo stain Sudan IV or fluorescent, diarylmethane Auramine O and were observed under confocal laser scanning microscope (CLSM). For all the plant species tested, the cuticle on the leaf surfaces could be clearly resolved in many cases into cuticular proper (CP), external cuticular layer (ECL), and internal cuticular layer (ICL). Novel image data analysis procedures for quantifying the epicuticular wax micromorphology were developed, and epicuticular waxes of L. angustifolius were described here for the first time. Together, application of a multifaceted approach involving the use of a range of techniques to study the plant cuticle has led to a better understanding of cuticular structure and provides new insights into leaf surface architecture.

Nature of crystalline particle assembly in ring shaped colloidal stains from concentrated dispersions

The drying of colloidal droplet suspensions is important in many realms of practical application and has sustained the interest of researchers over two decades. The arrangements of polystyrene and silica beads, both of diameter 1 μm, 10% by volume of solid deposited on normal glass (hydrophilic), and silicone (hydrophobic) surfaces evaporated from a suspension volume of 3 μL, were investigated. Doughnut shape depositions were found, imputing the influence of strong central circulation flows that resulted in three general regions. In the central region which had strong particle build-up, the top most layers of particle arrangement was confirmed to be disordered using power spectrum and radial distribution function analysis. On closer examination, this appeared more like frustrated attempts to crystallize into larger grains rather than beads arranging in a disordered fashion throughout the piling process. With an adapted micro-bulldozing operation to progressively remove layers of particles from the heap, we found that the later efforts to crystallize through lateral capillary inter-particle forces were liable to be undone once the particles contacted the disorganized particles underneath, which were formed out of the jamming of fast particles arriving at the surface. © 2014 Elsevier B.V.

Contribution of objective and subjective attributes to the variation in the whiteness and brightness of commercial mohair sale lots

Colour properties are measured prior to the sale of merino wool as they are of commercial importance when greasy wool is sold and when wool is dyed. With the paucity of knowledge of the colour properties of commercial mohair, this study aimed to identify and quantify the factors affecting the brightness (Y) and yellowness (Y-Z) values of commercial lots of Australian mohair. The research database comprised 520 sale lots (>500,000 kg mohair), which had tristimulus tests, and was sold during the period 2001–2009. Mohair was subjectively classed and sale lots objectively tested using international standard methods for mean fibre diameter (MFD, μm), fibre diameter coefficient of variation (%), International Wool Testing Organization (IWTO) clean wool base (IWTO yield, %w/w), vegetable matter (VM, %w/w) and the tristimulus values X, Y and Z (T units). The tristimulus values of Australian mohair were affected by the objective measurements of MFD, VM%, the subjective classing of stain, cotting, kemp and length and by the year and selling season. Variation in Y was more easily predicted with 90.5% of variance explained by the best model compared with variation in Y-Z, where the best model explained 51.6% of the total variance. Visually assessed properties of the mohair were very important in separating mohair of different Y properties, accounting for almost 80% of the total variance, but were far less important in accounting for the variance in Y-Z, accounting for about 9–10% of the total variance. The most important effects on the Y of mohair were associated with subjectively determined fault categories determined before the sale of mohair. In particular, stain fault explained about two-thirds of the variance in brightness of mohair sale lots. Stained mohair had much lower brightness than mohair free of stain but stain fault explained very little of the variation in yellowness of mohair sale lots. The extent of the differences in tristimulus values between seasons and years were not large for Y but were more important for yellowness (Y-Z), and these effects are likely to be of commercial importance. Generally, brightness decreased and yellowness increased as MFD increased up to about 30 μm. Both cotting and kemp fault were associated with reduced brightness and increased yellowness. The effects of VM% on tristimulus values were small. IWTO yield was associated with changes in tristimulus values, but in the best model, IWTO yield was not a significant determinant. This study indicates that commercial Australian fleece (nonfaulted) mohair was essentially white. Faulted mohair on the other hand exhibited poorer colour characteristics. The mohair subjectively identified as stained prior to sale comprised all the mohair which would be regarded as not white, and this investigation indicates that the effect of staining is on the brightness of mohair rather than the Y-Z measurement. Unlike the situation with merino wool, there was little relationship between the naturally occurring contaminants, as measured by the IWTO washing yield, and either Y or Y-Z.

Weathering, fibre strength and colour properties of processed white cashmere

Weathering refers to the degradation of wool fibres that occur during growth from exposure of the fleece to sunlight, water and air. Weathering damage to Merino wool reduces quantities of fibre that are harvested, reduces length in both raw and processed wools, reduces spinning performance and dyeing outcomes. This work aimed to aimed to quantify if and to what extent weathering occurred in 38 lots of commercial dehaired white cashmere and cashmere top sourced from traditional and new origins of production and the extent of any association between weathering and tensile strength properties of the dehaired cashmere and cashmere top. The cashmere was tested for physical properties, bundle tenacity and extension, tristimulus values brightness (Y) and yellowness (Y-Z) and reflectance. Dye uptake was used as an index of weathering. Linear models, relating to weathering, bundle tenacity and Y-Z were fitted to origin and other objective measurements. Mean attributes (range) were: mean fibre diameter, 17.0 μm (13.5–21.3 μm); bundle tenacity of tops, 10.3 cN/tex (8.3–12.9 cN/tex), for dehaired fibre, 10.1 cN/tex (9.1–11.4 cN/tex). Stain uptake varied from 0.92 to 6.34 mg/g fibre indicating a six-fold variation in the extent of weathering. Both the extent of weathering and the bundle tenacity of commercial lots of cashmere were affected by the origin of the cashmere. Increased weathering reduced bundle tenacity, bundle extension, increased the yellowness and reduced reflectance of white cashmere. Bundle tenacity of cashmere declined as fibre diameter variability increased from 20 to 22.5%. For the samples tested, the cashmere from China, Mongolia, Afghanistan and Iran showed more weathering than cashmere from Australia, New Zealand and the USA. The differences in the extent of weathering and of bundle tenacity between cashmere from different origins were of commercial significance.

Self-cleaning wool: effect of noble metals and silica on visible-light-induced functionalities of nano TiO2 colloid

© 2014 The Textile Institute. This study intends to enhance the functionality of titanium dioxide (TiO2) nanoparticles applied to wool fabrics under visible light. Herein, TiO2, TiO2/SiO2, TiO2/Metal, and TiO2/Metal/SiO2 nanocomposite sols were synthesized and applied to wool fabrics through a low-temperature sol–gel method. The impacts of three types of noble metals, namely gold (Au), platinum (Pt), and silver (Ag), on the photoefficiency of TiO2 and TiO2/SiO2 under visible light were studied. Different molar ratios of Metal toTiO2 (0.01, 0.1, 0.5, and 1%) were employed in synthesizing the sols. Photocatalytic efficiency of fabrics was analyzed through monitoring the removal of red wine stain and degradation of methylene blue under simulated sunlight and visible light, respectively. Also, the antimicrobial activity against Escherichia coli (E. coli) bacterium and the mechanical properties of fabrics were investigated. Through applying binary and ternary nanocomposite sols to fabrics, an enhanced visible-light-induced self-cleaning property was imparted to wool fabrics. It was concluded that the presence of silica and optimized amount of noble metals had a synergistic impact on boosting the photocatalytic and antimicrobial activities of coated samples. The fabrics were further characterized using attenuated total reflectance, energy-dispersive X-ray spectrometry, and scanning electron microscopy images.

Revisiting the Tasty raid: lesbian and gay respectability and police legitimacy

This article extends beyond analysis of homophobic police practices at the Tasty raid that took place in Melbourne in 1994 to explore the ways in which queer politics interact with constructions of ‘respectability’ in the contexts of criminalisation, policing and state protection. I argue that the successful construction of legitimate victimhood by lesbian and gay Tasty patrons (achieved largely through signifiers of middle-class respectability and the paradigm of sameness) impeded police efforts to control media narratives and secure legitimacy in the aftermath of the Tasty raid. The formal apology issued by Victoria Police in 2014 indicates that the Tasty raid was considered a significant enough stain on police reputation to warrant addressing two decades after the event itself. I consider the apology as an attempt to cleanse and redeem the institution of the negative image of police resulting from the Tasty raid. This case offers unique insights into some of the ways in which lesbians and gay men may achieve legitimacy as victims in a heteronormative context and how this might come at the cost of a structural analysis of sexuality, power and violence. It also highlights how state institutions navigate and avoid accountability to a specific and historically targeted group.

Self-cleaning and color reduction in wool fabric by nano titanium dioxide

Wool is a textile material that is valued for its strength, warmth, water resistance, and texture. But this natural fiber of the protein keratin lacks the stain resistance of synthetic fabrics and is also generally susceptible to harsh processing conditions. In this study, raw and oxidized wool fabrics were treated with nano titanium dioxide (TiO2) powder in an ultrasonic bath. These particles were linked to the wool surface by butane tetra carboxylic acid and also sodium hypophosphite was used as a catalyst. The photo-catalytic activity of TiO2 nanoparticles deposited on the wool fabrics was followed by the degradation of Acid Blue 113 as a stain and also determined by the degradation rate of food stains such as coffee, tea, and fruit juice under the ultraviolet rays. The results showed that increasing the amount of nano TiO2 leads to improved degradation of stains on the treated fabric.