Distribution of logs in a dry sclerophyll forest, Brisbane Ranges, Victoria

Fallen timber is an important habitat resource for small vertebrate and invertebrate animals in forests. This exploratory study investigated the pattern of distribution of fallen timber (here termed 'logs') in a dry sclerophyll forest in the Brisbane Ranges, Victoria, by sampling transects located in
gully, mid-slope and ridge positions, at each of 10 sites. Gullies supported a significantly higher density and volume of logs than ridges. The lowest abundance of logs was on ridges. The mean volume of logs was 98.6 m3/ha for gullies, 38.5 m3/ha at mid-slope positions and 13.1 m3/ha for ridges. The
volume of logs at transects was significantly positively correlated with the density of larger trees (diameter >40 em). A number of animal species in the Brisbane Ranges potentially use logs as a resource for shelter, foraging or perching, and hence the retention ofwoody debris will aid in habitat
management. The uneven distribution of logs in relation to forest topography and the size strueture of trees suggests that gullies, and forest stands with many large trees, are likely to be important habitats for species that use fallen timber. (The Victorian Naturalist 120 (2), 2003, 55-60)

The effect of fabric strain during pressure steaming on fabric dimensional properties

It is shown that tension applied to fabric which is then permanently set by steaming under pressure for a short time has a significant effect on fabric dimensional properties. Increasing levels of stretch applied to fabric before pressure steaming resulted in decreases in fabric hygral expansion and relaxation shrinkage and also lowered fabric shrinkage that resulted from permanent setting. The setting conditions resembled those used in conventional pressure decatising, and it is suggested that in batch decatising, precise control of the length and width of fabric as it is batched up with the wrapper before steaming under pressure could enable predictable changes in fabric dimensions, relaxation shrinkage and hygral expansion to be obtained.

User-generated content and the changing news cycle

Blogs represent a major development in media consumption and practice.  The Pew Center in the United States reported in mid-2005 that about eight million Americans had created blogs and 32 million read them.  That's equivalent to two-thirds the number of people who read a daily newspaper during a week, a challenging giguew in the context of dwindling circulations.  Blogs represent the start of the 'personal media' revolution, but are only the tip of a range of new media developments.  This paper describes the blog phenomenon and notes its arrival via a series of major new stories.  It suggests we are seeing the emergence of a new news cycle, as blogs and other internet-based media usurp broadcast's role in breaking news.  The paper describes a range of emerging digital journalism forms that make up the 'personal media' revolution.  These include blogs delivered via mobile phones (moblogs); video-based blogs (v-logs); newspapers' use of podcasting to deliver content; and wikis, or peer-generated online content. The media's reaction to this new form of content is described, and the other concludes by looking at the forces driving this new form of journalism.

Methods for exploring implementation variation and local context within a cluster tandomised community intervention trial

Insignificant or modest findings in intervention trials may be attributable to poorly designed or theorised interventions, poorly implemented interventions, or inadequate evaluation methods. The pre-existing context may also account for the effects observed. A combination of qualitative and quantitative methods is outlined that will permit the determination of how context level factors might modify intervention effectiveness, within a cluster randomised community intervention trial to promote the health of mothers with new babies. The methods include written and oral narratives, key informant interviews, impact logs, and inter-organisational network analyses. Context level factors, which may affect intervention uptake, success, and sustainability are the density of inter-organisational ties within communities at the start of the intervention, the centrality of the primary care agencies expected to take a lead with the intervention, the extent of context-level adaptation of the intervention, and the amount of local resources contributed by the participating agencies. Investigation of how intervention effects are modified by context is a new methodological frontier in community intervention trial research.

Web communities analysis and construction

Yanchun Zhang and his co-authors explain how to construct and analyse Web communities based on information like Web document contents, hyperlinks, or user access logs. Their approaches combine results from Web search algorithms, Web clustering methods, and Web usage mining. They also detail the necessary preliminaries needed to understand the algorithms presented, and they discuss several successful existing applications. Researchers and students in information retrieval and Web search find in this all the necessary basics and methods to create and understand Web communities. Professionals developing Web applications will additionally benefit from the samples presented for their own designs and implementations

Bypassing luminal barriers, delivery to a gut addressin by parenteral targeting elicits local IgA responses

Induction of mucosal immunity, particularly to subunit vaccines, has been problematic. The primary hurdle to successful mucosal vaccination is the effective delivery of vaccine antigen to the mucosal associated lymphoid tissue. Physical and chemical barriers restrict antigen access and, moreover, immune responses induced in the mucosa can be biased towards tolerance or non-reactivity. We proposed that these difficulties could be circumvented by targeting antigen to the gastrointestinal associated lymphoid tissue via systemic (parenteral) rather than alimentary routes, using antibodies specific for the mucosal addressin cellular adhesion molecule-1 (MAdCAM). After intravenous or intramuscular injection of such rat antibodies in mice, we found a greatly enhanced (up to 3 logs) anti-rat antibody response. MAdCAM targeting induces a rapid IgA antibody response in the gut and vastly improves the systemic antibody response. Targeting also enhanced T cell proliferation and cytokine responses. Parenteral targeting of mucosal addressins may represent a generic technique for bypassing mucosal barriers and eliminating the need for adjuvants in the induction of proximal and systemic immunity.

Volume of physical activity and injury occurrence in young basketball players

Participation in organised, competitive physical activity by young athletes is increasing rapidly. This is concurrent with an increase in sporting injuries in the young population. This pilot study aimed to compare the weekly volume and types of physical activity in young basketball players injured and not injured during the season. Detailed physical activity and injury data were prospectively collected in 46 school-level basketball players aged 14 to 18 years. Participants completed physical activity logs which documented the type of physical activity undertaken, what the activity consisted of (i.e. training, competition) and the level at which it was played on a daily basis. Allied health staff completed a weekly injury form. Results showed that injured and uninjured athletes participated in a similar volume of total weekly physical activity over the season. However, injured athletes (p = 0.04) and athletes who specifically sustained overuse injuries (p = 0.01) participated in a greater amount of basketball refereeing than uninjured athletes. Based on these findings it was concluded that greater participation in running-type physical activity such as refereeing, as an addition to training and competition, may predispose the young basketball player to increased injury risk. Future research using larger sample sizes are required to further investigate the role of participation volume and type on injury occurrence in adolescent athletes.

The dimensional and mechanical properties of wool/polyester fabrics made from vortex and ring-spun yarns

Fabric woven from wool/polyester (PES) Murata vortex spun (MVS) blend yarn is a commercially viable proposition particularly on the basis of advantageous wear-resistant properties, compared with fabric made from traditional worsted ring-spun yarn. However, in some early industrial trials with fabric made from 45/55-blend wool/PES MVS yarn, significantly greater relaxation shrinkage was found relative to comparable worsted ring-spun fabric. It was noted at the time that the amount of relaxation shrinkage in MVS fabric could be reduced to a large extent by using steamed MVS yarn.

In this study, the extent of variations in the dimensional and mechanical properties of fabric samples woven from a combination of steamed and unsteamed MVS yarn and equivalent worsted ring-spun yarn is examined. In general, greater hygral expansion and relaxation shrinkage were found in loom-state fabrics made from unsteamed MVS yarns, whereas the fabric made from steamed MVS and ring-spun yarns gave relatively low levels of relaxation shrinkage and hygral expansion. Permanent setting of fabrics, by pressure steaming, was found to be more effective than yarn pre-steaming in reducing relaxation shrinkage levels of fabrics made from unsteamed MVS yarn. After pressure steaming, all fabrics showed similar levels of relaxation shrinkage and hygral expansion.

Permanent setting of the fabrics, by pressure steaming, resulted in similar levels of relaxation shrinkage and hygral expansion, irrespective of the yarn production method; relaxation shrinkage fell to around 1% and hygral expansion increased by about 1%, relative to the loom-state samples. MVS fabrics were relatively heavier and fuller and had a firmer handle than the worsted ring-spun fabrics, reflecting the greater fabric weight, thickness and shear rigidity measured on these fabrics. These attributes are associated with different structures of the worsted ring-spun and MVS yarns used to make the fabrics.

Habitat requirements of the yellow-footed antechinus (Antechinus flavipes) in box–ironbark forest, Victoria, Australia

Understanding the habitat requirements of a species is critical for effective conservation-based management. In this study, we investigated the influence of forest structure on the distribution of the yellow-footed antechinus (Antechinus flavipes), a small dasyurid marsupial characteristic of dry forests on the inland side of the Great Dividing Range, Australia. Hair-sampling tubes were used to determine the occurrence of A. flavipes at 60 sites stratified across one of the largest remaining tracts of dry box–ironbark forest in south-eastern Australia. We considered the role of six potential explanatory variables: large trees, hollow-bearing trees, coppice hollows, logs, rock cover and litter. Logistic regression models were examined using an information-theoretic approach to determine the variables that best explained the presence or absence of the species. Hierarchical partitioning was employed to further explore relationships between occurrence of A. flavipes and explanatory variables. Forest structure accounted for a substantial proportion of the variation in occurrence of A. flavipes between sites. The strongest influence on the presence of A. flavipes was the cover of litter at survey sites. The density of hollow-bearing trees and rock cover were also positive influences. The conservation of A. flavipes will be enhanced by retention of habitat components that ensure a structurally complex environment in box–ironbark forests. This will also benefit the conservation of several threatened species in this dry forest ecosystem.

A hitchhiker's guide to assessing young people's physical activity : deciding what method to use

Researchers and practitioners interested in assessing physical activity in  children are often faced with the dilemma of what instrument to use. While there is a plethora of physical activity instruments to choose from, there is currently no guide regarding the suitability of common assessment instruments. The purpose of this paper is to provide a user’s guide for selecting physical activity assessment instruments appropriate for use with children and adolescents. While recommendations regarding specific instruments are not provided, the guide offers information about key attributes and considerations for the use of eight physical activity assessment approaches: heart rate monitoring; accelerometry; pedometry; direct observation; self-report; parent report; teacher report; and diaries/logs. Attributes of instruments and other factors to be considered in the selection of assessment instruments include: population (age); sample size; respondent burden; method/delivery mode; assessment time frame; physical activity information required (data output); data management; measurement error; cost (instrument and administration) and other limitations. A decision flow chart has been developed to assist researchers and practitioners to select an appropriate method of assessing physical activity. Five real-life scenarios are presented to illustrate this process in light of key instrument attributes. It is important that researchers, practitioners and policy makers understand the strengths and limitations of different methods of assessing physical activity, and are guided on selection of the most appropriate instrument/s to suit their needs.

Studies of the biology of four species of Dicranoloma

Populations of Dicranoloma billardierei (Brid) Par., D. dicarpum (Nees.) Par., D. menziesii (Tayl.) Par. and D. platycaulon (C. Muell) Dix, from two pockets of cool temperate rainforest within the Yarra Ranges National Park (Cement Creek and Myrtle Loop), were sampled for a period of two years to establish their reproductive biology. The population dynamics within quadrats of D. billardierei, D. menziesii and D. platycaulon at Cement Creek also was investigated over a two year period, through the seasonal recording of shoot loss and/or gain, The four species of Dicranoloma were dioicous and sexually dimorphic, with dwarf males epiphytic on the female plants. Antheridia were initiated before archegonia and required ca, 6 months to reach maturity, compared with 1 to 2 months for archegonia. More archegonia than antheridia occurred per inflorescence and were more variable Fertilization occurred during winter in D. billardierei and summer/ autumn in D. menziesii and D. platycaulon. The duration of the sporophyte cycle of D. menziesii was 12 months, shorter than that of D. billardierei and D. platycaulon which lasted for a period of 18 months to 2 years. In the latter two species an overlap of sporophyte generations occurred. This was particularly pronounced in D. billardierei as sporophytes remained in the swollen venter maturation stage for a period of 6 months. The duration of the sporophyte cycle could not be ascertained as few fruiting stems of D. dicarpum were found. All four species of Dicranoloma regenerated from fragments cultured in the laboratory, and only two of the species showed evidence of production of asexual propagules in the field. Dicranoloma dicarpum was found to produce gemmae, an observation which had not been recorded before, and most of the leaves on stems of D. platycaulon had detached subulas. Shoot loss was minimal in all four species, and when it did occur, (eg D. billardierei) it was attributed to disturbance by animals. Within quadrats there was an increase in shoot density which resulted from the development of innovation(s) and/or side branches rather than from the recruitment of new plants from spores or the regeneration of asexual propagules. The four species of Dicranoloma investigated were robust, perennial mosses and formed an important component of the bryophytes found within the study area. Dicranoloma menziesii was the predominant species establishing on a variety of substrata, particularly as an epiphyte on Nothofagus cunninghamii The other species were more selective in their choice of substratum. Dicranoloma platycaulon was found exclusively on the trunks of myrtle beech and D. billardierei on fallen logs and exposed roots. Dicranoloma dicarpum which was not common, grew as an epiphyte on myrtle beech and on rocks.

Investigation into the interactive multimedia production processes of novice multimedia designer /producers in a constructivist environment

The main purpose of this study was to investigate the instructional interactive multimedia (IMI) production processes of adult novice multimedia production course. The study aimed at discovering whether a constructivistic teacher-learning environment facilitated these multimedia novice designer / producers to further develop metacognitivestates of higher-order thinking like schema formation, problem-solving and cognitive construction when producing their interactive multimedia project. To achieve this study examined the facilitative and limiting activities in planning, design and development that have assisted or hindered the NMDPs during their multimedia production work This research utilises a qualitative paradigm and makes extensive use of multiple data sources such as the participants’ proposals, planning aids, logs and final projects for single as well as cross-case analyses and discussion. Three cases were selected for in-depth analysis in the study because they provided interviews and more complete documentation and "thick descriptions" of their multimedia production activities. Findings about the NMDPs multimedia production endeavours showed that they learnt best about multimedia technology for teacing and learning by producing an interactive multimedia project themselves. Factors that enabled some of the NMDPs to flourish in a constructivistic environment included their ability to utilise their new and extended schemata to problem solve, their self regulation and a creative and positive attitude to demanding multimedia work NMDPs who utilised facilitative planning aids and design strategies produced impressive work. The study further indicates that the NMDPs’ holistic multimedia production experience made them aware of the levels of complexity involved and boosted their confidence about multimedia production for educational purposes. Suggestions for further research include examining the production styles of adult multimedia novices and young novices and investigating the implications of designing multimedia for large audience presentation rather than for single or small group learner usage.

A study of dimensional changes in wool fibres and fabrics

Wool fabric dimensional properties were found to be influenced by the temperature and pH of the fabric, and on the fabric tension during pressure steaming. The results show that improvements can be made to standard methods for measuring fabric dimensional properties, and to the design of commercial finishing steaming equipment.

Haptically enabled interactivity and immersive virtual assembly

Virtual training systems are attracting paramount attention from the manufacturing industries due to their potential advantages over the conventional training practices such as general assembly. Within this virtual training realm for general assembly, a haptically enabled interactive and immersive virtual reality (HIVEx) system is presented. The idea is to imitate real assembly training scenarios by providing comprehensive user interaction as well as by enforcing physical constraints within the virtual environment through the use of haptics technology. The developed system employs a modular system approach providing flexibility of reconfiguration and scalability as well as better utilization of the current multi-core computer architecture. The user interacts with the system using haptics device and data glove while fully immersed into the virtual environment with depth perception. An evaluation module, incorporated into the system, automatically logs and evaluates the information through the simulation providing user performance and improvements over time. A ruggedized portable version of the system is also developed and presented with full system capabilities allowing easy relocation with different factory environments. A number of training scenarios has been developed with varying degree of complexity to exploit the potential of the presented system. The presented system can be employed for teaching and training of existing assembly processes as well as the design of new optimised assembly operations. Furthermore, the presented system can assist in optimizing existing practices by evaluating the effectiveness and the level of knowledge transfer involved in the process. Within the aforementioned conceptual. framework, a working prototype is developed.