A construction method of Atanassov’s intuitionistic fuzzy sets for image processing

In this work we introduce a new construction method of Atanassov's intuitionistic fuzzy sets (A-IFSs) from fuzzy sets. We use A-IFSs in image processing. We propose a new image magnification algorithm using A-IFSs. This algorithm is characterized by its simplicity and its efficiency.

A construction method of interval-valued fuzzy sets for image processing

In this work we present a new construction method of IVFSs from Fuzzy Sets. We use these IVFSs for image processing. Concretely, in this contribution we introduce a new image magnification algorithm using IVFSs. This algorithm is based on block expansion and it is characterized by its simplicity.

Prediction interval construction using interval type-2 fuzzy logic systems

This study proposes a novel non-parametric method for construction of prediction intervals (PIs) using interval type-2 Takagi-Sugeno-Kang fuzzy logic systems (IT2 TSK FLSs). The key idea in the proposed method is to treat the left and right end points of the type-reduced set as the lower and upper bounds of a PI. This allows us to construct PIs without making any special assumption about the data distribution. A new training algorithm is developed to satisfy conditions imposed by the associated confidence level on PIs. Proper adjustment of premise and consequent parameters of IT2 TSK FLSs is performed through the minimization of a PI-based objective function, rather than traditional error-based cost functions. This new cost function covers both validity and informativeness aspects of PIs. A metaheuristic method is applied for minimization of the non-linear non-differentiable cost function. Quantitative measures are applied for assessing the quality of PIs constructed using IT2 TSK FLSs. The demonstrated results for four benchmark case studies with homogenous and heterogeneous noise clearly show the proposed method is capable of generating high quality PIs useful for decision-making.

An interval type-2 fuzzy logic system-based method for prediction interval construction

This paper introduces a new non-parametric method for uncertainty quantification through construction of prediction intervals (PIs). The method takes the left and right end points of the type-reduced set of an interval type-2 fuzzy logic system (IT2FLS) model as the lower and upper bounds of a PI. No assumption is made in regard to the data distribution, behaviour, and patterns when developing intervals. A training method is proposed to link the confidence level (CL) concept of PIs to the intervals generated by IT2FLS models. The new PI-based training algorithm not only ensures that PIs constructed using IT2FLS models satisfy the CL requirements, but also reduces widths of PIs and generates practically informative PIs. Proper adjustment of parameters of IT2FLSs is performed through the minimization of a PI-based objective function. A metaheuristic method is applied for minimization of the non-linear non-differentiable cost function. Performance of the proposed method is examined for seven synthetic and real world benchmark case studies with homogenous and heterogeneous noise. The demonstrated results indicate that the proposed method is capable of generating high quality PIs. Comparative studies also show that the performance of the proposed method is equal to or better than traditional neural network-based methods for construction of PIs in more than 90% of cases. The superiority is more evident for the case of data with a heterogeneous noise. © 2014 Elsevier B.V.

Construction and aggregation of preference relations based on fuzzy partial orders

In group decision-making problems it is common to elicit preferences from human experts in the form of pairwise preference relations. When this is extended to a fuzzy setting, entries in the pairwise preference matrix are interpreted to denote strength of preference, however once logical properties such as consistency and transitivity are enforced, the resulting preference relation requires almost as much information as providing raw scores or a complete order over the alternatives. Here we instead interpret fuzzy degrees of preference to only apply where the preference over two alternatives is genuinely fuzzy and then suggest an aggregation procedure that minimizes a generalized Kemeny distance to the nearest complete or partial order. By focusing on the fuzzy partial order, the method is less affected by differences in the natural scale over which an expert expresses their preference, and can also limit the influence of extreme scores.

Density based fuzzy c-means clustering of non-convex patterns

We propose a new technique to perform unsupervised data classification (clustering) based on density induced metric and non-smooth optimization. Our goal is to automatically recognize multidimensional clusters of non-convex shape. We present a modification of the fuzzy c-means algorithm, which uses the data induced metric, defined with the help of Delaunay triangulation. We detail computation of the distances in such a metric using graph algorithms. To find optimal positions of cluster prototypes we employ the discrete gradient method of non-smooth optimization. The new clustering method is capable to identify non-convex overlapped d-dimensional clusters.

Methods of construction of OWA operators from data

This paper investigates the problem of obtaining the weights of the ordered weighted aggregation (OWA) operators from observations. The problem is formulated as a restricted least squares and uniform approximation problems. We take full advantage of the linearity of the problem. In the former case, a well known technique of non-negative least squares is used. In a case of uniform approximation, we employ a recently developed cutting angle method of global optimisation. Both presented methods give results superior to earlier approaches, and do not require complicated nonlinear constructions. Additional restrictions, such as degree of orness of the operator, can be easily introduced

Fuzzy c-means density based clustering using data induced metric

We propose a new data induced metric to perform un supervised data classification (clustering). Our goal is to automatically recognize clusters of non-convex shape. We present a new version of fuzzy c-means al gorithm, based on the data induced metric, which is capable to identify non-convex d-dimensional clusters.

Construction of aggregation operators for automated decision making via optimal interpolation and global optimization

This paper examines methods of point wise construction of aggregation operators via optimal interpolation. It is shown that several types of application-specific requirements lead to interpolatory type constraints on the aggregation function. These constraints are translated into global optimization problems, which are the focus of this paper. We present several methods of reduction of the number of variables, and formulate suitable numerical algorithms based on Lipschitz optimization.

Construction of aggregation operators with noble reinforcement

This paper examines disjunctive aggregation operators used in various recommender systems. A specific requirement in these systems is the property of noble reinforcement: allowing a collection of high-valued arguments to reinforce each other while avoiding reinforcement of low-valued arguments. We present a new construction of Lipschitz-continuous aggregation operators with noble reinforcement property and its refinements.

Fuzzy neural networks for control of dynamic systems

This thesis provides a unified and comprehensive treatment of the fuzzy neural networks as the intelligent controllers. This work has been motivated by a need to develop the solid control methodologies capable of coping with the complexity, the nonlinearity, the interactions, and the time variance of the processes under control. In addition, the dynamic behavior of such processes is strongly influenced by the disturbances and the noise, and such processes are characterized by a large degree of uncertainty. Therefore, it is important to integrate an intelligent component to increase the control system ability to extract the functional relationships from the process and to change such relationships to improve the control precision, that is, to display the learning and the reasoning abilities. The objective of this thesis was to develop a self-organizing learning controller for above processes by using a combination of the fuzzy logic and the neural networks. An on-line, direct fuzzy neural controller using the process input-output measurement data and the reference model with both structural and parameter tuning has been developed to fulfill the above objective. A number of practical issues were considered. This includes the dynamic construction of the controller in order to alleviate the bias/variance dilemma, the universal approximation property, and the requirements of the locality and the linearity in the parameters. Several important issues in the intelligent control were also considered such as the overall control scheme, the requirement of the persistency of excitation and the bounded learning rates of the controller for the overall closed loop stability. Other important issues considered in this thesis include the dependence of the generalization ability and the optimization methods on the data distribution, and the requirements for the on-line learning and the feedback structure of the controller. Fuzzy inference specific issues such as the influence of the choice of the defuzzification method, T-norm operator and the membership function on the overall performance of the controller were also discussed. In addition, the e-completeness requirement and the use of the fuzzy similarity measure were also investigated. Main emphasis of the thesis has been on the applications to the real-world problems such as the industrial process control. The applicability of the proposed method has been demonstrated through the empirical studies on several real-world control problems of industrial complexity. This includes the temperature and the number-average molecular weight control in the continuous stirred tank polymerization reactor, and the torsional vibration, the eccentricity, the hardness and the thickness control in the cold rolling mills. Compared to the traditional linear controllers and the dynamically constructed neural network, the proposed fuzzy neural controller shows the highest promise as an effective approach to such nonlinear multi-variable control problems with the strong influence of the disturbances and the noise on the dynamic process behavior. In addition, the applicability of the proposed method beyond the strictly control area has also been investigated, in particular to the data mining and the knowledge elicitation. When compared to the decision tree method and the pruned neural network method for the data mining, the proposed fuzzy neural network is able to achieve a comparable accuracy with a more compact set of rules. In addition, the performance of the proposed fuzzy neural network is much better for the classes with the low occurrences in the data set compared to the decision tree method. Thus, the proposed fuzzy neural network may be very useful in situations where the important information is contained in a small fraction of the available data.

Editorial : the construction of academic literacy and difference

In recent years, academic literacy has been a subject of heated scholarly and political debates. How academic literacy is defined, whom it serves, and what its purposes are shape both educational policies and the pedagogical practices adopted in classrooms. Any definition of academic literacy, its purposes and its learners also constructs powerful notions of difference. For instance, many traditional definitions of academic literacy posit “out of school” literacy (or literacies) as its opposite; current literacy standards and performance measures create categories of students as able or struggling; and so on. At a time when English classrooms around the world are becoming more multicultural, multilingual and international, how might understandings of academic literacy respond to cultural, linguistic, gender, economic, (dis)ability and other differences? How can literacy be taught to difference without reducing it to sameness? Framing the curriculum around dominant cultural literacy and establishing communal homogeneity, whilst de-legitimizing the Other and announcing ever-new strangers, is not feasible in a new multilingual, multiculural order. There is an increasing need to resist conservative tendencies and to continue a socially critical model of literacy education that is more response-able to the lives of strangers and other forms of difference in a late-modern, globalized society at the same time that it provides opportunities for all students to expand their communicative repertoires and to gain agency in the “design of their social futures” (New London Group, 2000). Articles in this issue respond in different ways to this agenda.

First-year law students’ construction of professional identity through writing

While there is a considerable body of research on law student identity construction based on interviews and transcripts of classroom talk, there is very little work based on student written texts. In this article two letters of advice written by beginning law students are analysed, using Ivanic and Camps’s (2001) framework, as an example of identity formation. Legal identity is argued to be formed by students’ attempts to accommodate a dynamic, partial, practitioner role of provider of advice to the traditional analytic focus of the law student. The process of accommodation is evident in the language of the letters, which show disfluencies resulting from attempts to combine different roles into a coherent legal identity. Comparison with a professionally written letter suggests that, rather than seeking to shape a coherent position, lawyers are able simultaneously to hold incompatible perspectives, concealing the tensions by foregrounding some perspectives and backgrounding others.

Construction of k-Lipschitz triangular norms and conorms from empirical data

This paper examines the practical construction of k-Lipschitz triangular norms and conorms from empirical data. We apply a characterization of such functions based on k-convex additive generators and translate k-convexity of piecewise linear strictly decreasing functions into a simple set of linear inequalities on their coefficients. This is the basis of a simple linear spline-fitting algorithm, which guarantees k-Lipschitz property of the resulting triangular norms and conorms.