Possible influence of Gondwanan glaciation on low-latitude carbonate sedimentation and trans-equatorial faunal migration: the lower Permian of South China

Peculiar Early Permian palaeontological and sedimentological features are reviewed from South China, including characteristic Early Permian cold-water Gondwanan brachiopod taxa and faunas from Sichuan and Guizhou provinces, widespread rosettes and irregular aggregates of calcite prisms ('Chrysanthemum Stones') within the Qixia limestones, and lack of significant Early Permian reef buildups. The occurrences of these features are at odds with the currently widely held view that South China was located in a palaeotropical, warm-water setting throughout the Permian and hence harboured a highly diverse shallow marine biota. In this paper, I propose a working hypothesis, suggesting that influence of at least cool water masses may have intermittently occurred in South China during the Early Permian, which facilitated the formation of the cool water-influenced palaeontological and sedimentological features and promoted the interchanges of cool to cold water marine faunas between the Gondwanan and Boreal Realms. These cool water masses may have been transported to low-latitude regions as deep currents from northern and eastern shelves of Gondwanaland and upwelled along the western coast of South China as well as within the relatively deep-water basins of central South China. Prevalence of these meridional, north-directed deep cold water currents during the Early Permian may have been related to the glaciation event of Gondwanaland. An alternative and/or additional source of cooling may have also originated from strong easterly palaeoequatorial boundary currents operating within the Palaeotethys at times during the Early Permian, inducing and/or enhancing upwelling of cool to cold water masses in the eastern Palaeotethys. This latter scenario is analogous to the occasional 'La Nina' effect (opposite to the 'El Nino' effect) at the equatorial belt of the modern Pacific Ocean.

Lower permian oncolites from South China: implications for equatorial sea-level responses to late palaeozoic Gondwanan glaciation

The oncoid-bearing Chuanshan Formation is a regionally extensive carbonate deposit of predominantly Asselian to early Sakmarian (Early Permian) age in South China, occupying an area of some 500,000 km2. Throughout South China, the oncoid-bearing horizons are generally stable and broadly comparable in lithology, fossil content and the morphology of the oncoid grains. Four types of microfacies are recognized from the oncolite succession and overall they suggest a moderate- to high-energy, wave-agitated shallow marine carbonate platform environment. An analysis of the stratigraphic distribution of oncoid grain size, density, thickness and the bedding structures of the oncolite beds and the number of coating laminae indicate the presence of metre-scale cyclothems, suggestive of possible high-frequency cycles of sea-level fluctuation. Compared to carbonate successions above and below that lack oncolites, and in conjunction with evidence from sequence stratigraphic and isotopic geochemical analyses of coeval carbonate deposits in South China and elsewhere, the origin of the Chuanshan oncolites is linked to a drastic drop in global sea-level at the Pennsylvanian–Permian boundary, that can be correlated closely in timing with the zenith of the Late Palaeozoic Gondwanan glaciation. It is further suggested that the eustatic changes apparent from the deposition of the Chuanshan oncolites and similar coeval deposits in lower palaeolatitudes were coupled with, and influenced by, the contemporaneous high-latitude Gondwanan glaciation, the largest and longest known such event in Phanerozoic Earth history.

Determination of cashmere and wool fibre scale frequency by analysing diameter profiles with fast fourier transform

This paper describes a potentially faster and cheaper method of determining fibre scale frequencies. The method uses the single fibre analyser (SIFAN) to  determine the along the fibre diameter profile. This information is then analysed by the Fast Fourier Transform technique using computer software. The paper shows the close association between the mean scale frequencies determined by this method and the traditional approach using SEM.

Hormone therapy is associated with smaller achilles tendon diameter in active post-menopausal women

The effects of hormonal status and activity levels on Achilles tendon structure were examined in asymptomatic post-menopausal women. It was hypothesized that women using hormone replacement therapy (HRT) would have better tendon structure than those not using HRT and that active women would have poorer tendon structure than inactive women. Eighty-five women including 53 active women (regular golf players) and 32 controls (healthy but inactive women) recorded their HRT and menopausal history and underwent basic anthropometric measurements. Women were divided into two groups based on their hormonal status: those currently using HRT; and those who had never used HRT or ceased using HRT at least 12 months prior to the study. Achilles tendons were examined with ultrasound and categorized as normal or abnormal, and the diameter of each tendon (mm) was recorded. Active women had a greater prevalence of tendon abnormality ( P=0.10) and thicker Achilles tendons than inactive women ( P<0.05). Active women on HRT had less tendon abnormality ( P=0.056) than active women not on HRT and significantly less tendon thickness ( P<0.05). This study indicates that Achilles tendon diameter is greater in active post-menopausal women. Hormone replacement therapy appeared to ameliorate this effect in active women. A similar effect from HRT on the Achilles tendons of inactive women was not apparent.

Measurement precision and evaluation of the diameter profiles of single wool fibers

A recent model of the Single Fiber Analyzer 3001 (SIFAN3001) was firstly employed to obtain the single wool fiber diameter profiles (SfFDPs) at multiple orientations. The results showed that using SIFAN3001 to measure fiber diameter at four orientations for 50 single fibers randomly sub-sampled from each mid-side sample can produce average fiber diameter profiles (AS fFDPs) of fibers within staples. Within the testing regime used, the precision estimates for the total samples were ±1.3 µm for the mean fiber diameter of staples and 1.4 µm for the average fiber diameter of the AS fFDPs at each scanned step in the diameter profile. The mean diameter ratio (ellipticity) obtained from the four orientations was 1.08±0.01, confirming that the Merino wool fibers under review were elliptical rather than circular. The elliptical morphology of wool fibers and the precision of the fiber diameter measurement at each point along a fiber will be considered in the development of a mechanical model of Staple Strength testing.

Diameter variations of irregular fibers under different tensions

The cross-section area of animal fibers varies along the fiber length, and this geometrical irregularity has a major impact on the mechanical properties of those fibers. In practice fibers are often subjected to tensile stresses during processing and application, which may change fiber cross-section area. It is thus necessary to examine geometrical irregularity of fibers under tension. In this study, scoured animal fibers were subjected to different tensile loading using a Single Fiber Analyzer (SIFAN) instrument. The 3D images of the fiber specimens were first constructed, and then along-fiber diameter irregularities of the specimens were analyzed for different levels of tensile loading. The changes in effective fineness of the fiber specimens were also discussed. The results indicate that for the wool fibers examined, there is considerable discrepancy in the fiber diameter results obtained from the commonly used single scan along fiber length and that from multiple scans at different rotational angles, and that the diameter variation along fiber length increases as fiber tension increases. The results also show that when diameter reduction treatments are applied to wool by stretching, the reduced average fiber diameter is associated with an increase in both within-fiber and between-fiber diameter variations. So in terms of effective fineness, the change is much smaller than the difference between the average diameters of the parent and treated wool. These results have significant implications for improving the accuracy of fiber diameter measurement and evaluation.

The measurement precision and evaluation of the diameter profiles of single wool fibres

A recent model of Single Fibre Analyser 3001 (SIFAN3001) was firstly employed to obtain the single wool fibre diameter profiles (SfFDP’s) at multiple orientations. The results showed that using SIFAN3001 to measure fibre diameter at four orientations for 50 single fibres randomly sub-sampled from each mid-side sample can produce average fibre diameter profiles (ASfFDP’s) of fibres within staples. Within the testing regime used, the precision estimates for the total samples were ±1.3µm for mean fibre diameter of staples and ±1.4µm for average fibre diameter of the ASfFDP’s at each scanned step in the diameter profile. The mean diameter ratio (ellipticity) obtained from the four orientations was 1.08±0.01, confirming that the Merino wool fibres under review were elliptical rather than circular. The elliptical morphology of wool fibres and the precision of fibre diameter measurement at each point along a fibre will be considered in the development of a mechanical model of Staple Strength testing.

Small diameter Polyurethane vascular graft reinforced by elastic weft-knitted tubular fabric of polyester / spandex

Small diameter vascular grafts were fabricated from pure Polyurethane (PU) as well as PU reinforced with a tubular weft-knitted fabric. The tensile properties of the reinforced composite vascular grafts were compared with that of the tubular fabric itself and the pure PU vascular grafts. The elasticity and strength of the reinforced vascular grafts were improved compared with the tubular fabric. Strength of the reinforced vascular grafts was 5–10 times of the strength of the pure PU vascular grafts. Expanding the tubular fabric to increase the inner diameter of the reinforced vascular graft reduced the graft’s strength and initial modulus, but the difference was reduced as the PU content was increased. For grafts of the same inner diameter, increasing the PU content increased the thickness and strength of the graft wall, which led to a general increase in the strength and initial modulus of the composite vascular grafts.

Sources of variation in fibre diameter attributes of Australian alpacas and implications for fleece evaluation and animal selection

Sources of variation in fibre diameter attributes of Australian alpacas and implications for fleece evaluation and animal selection were investigated using data collected in the years 1994–97, from 6 properties in southern Australia. Data were analysed using REML (multiple regression analysis) to determine the effect on mean fibre diameter (MFD) and coefficient of variation of MFD (CV(FD)) of age, origin (property), sex (entire male, female), breed (Huacaya, Suri), liveweight, fibre colour, individual, and interactions of these effects. The mean (n = 100) age (range) was 4.2 years (0.1–11.9), liveweight 72.0 kg (12.0–134 kg), MFD 29.1 μm (17.7–46.6 μm), CV(FD) 24.33% (15.0–36.7%).

A number of variables affected MFD and CV(FD). MFD increased to 7.5 years of age, and correlations between MFD at 1.5 and 2 years of age with the MFD at older ages were much higher than correlations at younger ages. Fibre diameter 'blowout' (increase with age) was positively correlated with the actual MFD at ages 2 years and older. There were important effects of farm, and these effects differed with year and shearing age. Suris were coarser than Huacayas with the effect reducing with increased liveweight; there was no effect of sex. Fleeces of light shade were 1 μm finer than dark fleeces. CV(FD) declined rapidly between birth and 2 years of age, reaching a minimum at about 4 years of age and then increasing; however, CV(FD) measurements on young animals were very poor predictors of CV(FD) at older ages, and the response of CV(FD) to age differed with farm and year. Suris had a higher CV(FD) than Huacayas on most properties, and MFD, liveweight, and sex did not affect CV(FD). Fleeces of dark shade had higher CV(FD) than fleeces of light shade in 2 of the years. It is concluded that there are large opportunities to improve the MFD and CV(FD) of alpaca fibre through selection and breeding. The potential benefit is greatest from reducing the MFD and CV(FD) of fibre from older alpacas, through reducing the between-animal variation in MFD and CV(FD). Sampling alpacas at ages <2 years is likely to substantially decrease selection efficiency for lifetime fibre diameter attributes.