The influence of various seat design parameters: a computational analysis

Nowadays, low back pain becomes a common healthcare problem. Poor or unsuitable seat design is related to the discomfort and other healthcare problems of users. The aim of this study is to investigate the influence of seat design variables on the compressive loadings of lumbar joints. A basis that includes a musculoskeletal human body model and a chair model has been developed using LifeMOD Biomechanics Modeller. Inverse and forward dynamic simulations have been performed for various seat design parameters. The results show that the inclination of backrest and seat pan may or may not decrease the compressive spinal joint forces, depending on other conditions. The medium-level height and depth of seat pan and the medium-level and high-level height of backrest are found to cause the minimum compressive loads on lumbar joints. This work contributes to a better understanding of sitting biomechanics and provides some useful guidelines for seat design.

A PAL1 gene promoter-green fluorescent protein reporter system to analyse defence responses in live cells of Arabidopsis thaliana

Arabidopsis thaliana ecotype Columbia-0 was transformed with a green fluorescent protein (GFP) gene under control of a phenylalanine ammonia-lyase (PAL) promoter. PAL is a key enzyme of the phenylpropanoid pathway and is induced to high levels during plant stress. Constitutive expression of PAL1 promoter-controlled GFP occurred in vascular tissues within stems, leaves and roots and in developing flowers. PAL1 promoter–GFP expression was examined in leaves of transgenic plants subjected to an abiotic elicitor, mechanical wounding or to inoculation with the pathogens Pseudomonas syringae pv. tomato or Peronospora parasitica. Wounding of leaves and treatment with an abiotic elicitor and compatible interactions produced low to moderate levels of GFP. However, in incompatible interactions there were high levels of GFP produced. In incompatible interactions, the intensity of GFP fluorescence was similar to that produced in transgenic plants expressing GFP driven by the CaMV promoter. The bright green fluorescence produced in live cells and tissues was readily visualised using conventional fluorescence microscopy and was quantified using spectroflourometry. This is the first report of the use of GFP as a reporter of defence gene activation against pathogens. It has several advantages over other reporter genes including real time analysis of gene expression and visualisation of defence gene activation in a non-invasive manner.

Returning to work: exploring the experiences of women with acute coronary syndromes

Aims: The aim of this study was to explore the transition experiences of Australian women in resuming paid employment after an acute coronary syndrome (ACS) event. Background: Until recently cardiovascular research has focused predominantly on men but this is changing and research exploring women’s experiences of ACS has increased. Despite knowing that many women do not resume paid employment following an ACS event, little is known about the experience of those women who do, even though it is understood that returning to the previous level of employment after an ACS event is a positive outcome. Design: An exploratory qualitative approach underpinned by naturalistic inquiry was undertaken. Methods: A purposive sample of seven women who had experienced their first ACS event 12 months ago was selected. Each woman was interviewed using a semi–structured format and their interviews were transcribed verbatim. Thematic analysis of the transcript set and conceptual mapping were employed to formulate key themes. Findings: All women (mean age 52.6 years) resumed paid employment at various stages during their recovery, but reported similar transition processes. Three key themes representing this process were identified: primary motivation; influence through guidance and support; and resuming paid employment. Conclusions: Study findings revealed that these women required substantial support from family, friends and employers, with ongoing guidance from health professionals to return to paid work. The time frames for their return varied and some modified their roles within the workforce to enable them to return to paid work. However, formal cardiac rehabilitation did not appear to have a significant impact on these participants' decisions to return to work. They felt that more information about this decision may have been helpful if given at the time of cardiac rehabilitation.

Methodological issues in design-construction integration

A major contributory factor to poor project performance in the construction industry is known to be the lack of integration and coordination between the different disciplines involved in various stages of the procurement process. Attempts by researchers to address this problem have met with limited success, as they have focused mainly on adapting integration techniques originally developed for use in the manufacturing industry. There is therefore a need to develop a detailed understanding of the fundamental sciences that underpin the problem of integrating the procurement process across the construction project life cycle. Presents and discusses a research model for addressing major methodological issues in the analysis of design/construction relationships.

Vascular distribution of nitric oxide synthase and vasodilation in the Australian lungfish, Neoceratodus forsteri

The presence of nitric oxide synthase (NOS) and role of nitric oxide (NO) in vascular regulation was investigated in the Australian lungfish, Neoceratodus forsteri. No evidence was found for NOS in the endothelium of large and small blood vessels following processing for NADPH-diaphorase histochemistry. However, both NADPH-diaphorase histochemistry and neural NOS immunohistochemistry demonstrated a sparse network of nitrergic nerves in the dorsal aorta, hepatic artery, and branchial arteries, but there were no nitrergic nerves in small blood vessels in tissues. In contrast, nitrergic nerves were found in non-vascular tissues of the lung, gut and kidney. Dual-wire myography was used to determine if NO signalling occurred in the branchial artery of N. forsteri. Both SNP and SIN-1 had no effect on the pre-constricted branchial artery, but the particulate guanylyl cyclase (GC) activator, C-type natriuretic peptide, always caused vasodilation. Nicotine mediated a dilation that was not inhibited by the soluble GC inhibitor, ODQ, or the NOS inhibitor, L-NNA, but was blocked by the cyclooxygenase inhibitor, indomethacin. These data suggest that NO control of the branchial artery is lacking, but that prostaglandins could be endothelial relaxing factors in the vasculature of lungfish.

A systems analysis method for online teaching and learning systems

A Method for Educational Analysis and Design (MEAD) was developed to analyse and design online teaching and learning systems. The method is based upon a participational design approach focused on the requirements of the users (students)

Design of a valid simulation for researching physical, physiological and cognitive performance in volunteer firefighters during bushfire deployment.

Every year, Australian firefighters protect our nation from the devastation of bushfire. Understanding the impact of consecutive long shifts in hot, smoky conditions is essential for making decisions during campaign fires. At present, the evidence-base for such decisions is limited to laboratory studies with little relevance to bushfire suppression or field research where the impact of environmental and workload stressors cannot be measured. To counter these limitations, we have developed a three-day simulation that mimics the work and environment of campaign bushfire suppression. Construction of the simulation involved three stages; 1) data collection and analysis; 2) design and development; and 3) trial and refinement. The frequency, intensity, duration and type of physical work performed on the fireground is well documented and a modified applied cognitive task analysis, using experienced firefighters was used as a framework to describe in detail the non-physical aspects of the work. The design and development of the simulation incorporated the physical and non-physical aspects of the work into simulated tasks. Finally, experienced firefighters participated in trials of the simulation and reviewed digital recordings to ensure that the simulation accurately represented campaign bushfire suppression work. The outcome of this project is a valid, realistic, and reliable simulation of the physiological, physical and cognitive aspects of a volunteer firefighter on a three-day bushfire deployment.

Inverse kinematics analysis of 6-RRCRR parallel manipulators

This paper presents a solution to the inverse kinematics of 6-RRCRR parallel manipulators with orthogonal non-intersecting RR-joint configuration. The inverse kinematics solution of such parallel robots compared with that of parallel robots with orthogonal intersecting RR-joint or universal joint configuration is more complex due to the existence of RR-joint variables. A novel methodology is established to define 6 independent variables of the actuators and 12 dependent RR-joint variables using the pose of the mobile platform with respect to the base frame. The constraint of RR-joints are analysed and the numerical algorithm to obtain joint variables is assessed. The forward kinematics of a 6- RRCRR parallel manipulator is modelled and computational analysis is performed in order to numerically verify the accuracy and effectiveness of the proposed methodology for the inverse kinematics analysis. Numerical results of a trajectory tracking simulation are provided. The results verify high accuracy for the proposed inverse kinematics solution of this special family of parallel micromanipulators.

On exploratory factor analysis: a review of recent evidence, an assessment of current practice, and recommendations for future use

Exploratory factor analysis (hereafter, factor analysis) is a complex statistical method that is integral to many fields of research. Using factor analysis requires researchers to make several decisions, each of which affects the solutions generated. In this paper, we focus on five major decisions that are made in conducting factor analysis: (i) establishing how large the sample needs to be, (ii) choosing between factor analysis and principal components analysis, (iii) determining the number of factors to retain, (iv) selecting a method of data extraction, and (v) deciding upon the methods of factor rotation. The purpose of this paper is threefold: (i) to review the literature with respect to these five decisions, (ii) to assess current practices in nursing research, and (iii) to offer recommendations for future use. The literature reviews illustrate that factor analysis remains a dynamic field of study, with recent research having practical implications for those who use this statistical method. The assessment was conducted on 54 factor analysis (and principal components analysis) solutions presented in the results sections of 28 papers published in the 2012 volumes of the 10 highest ranked nursing journals, based on their 5-year impact factors. The main findings from the assessment were that researchers commonly used (a) participants-to-items ratios for determining sample sizes (used for 43% of solutions), (b) principal components analysis (61%) rather than factor analysis (39%), (c) the eigenvalues greater than one rule and screen tests to decide upon the numbers of factors/components to retain (61% and 46%, respectively), (d) principal components analysis and unweighted least squares as methods of data extraction (61% and 19%, respectively), and (e) the Varimax method of rotation (44%). In general, well-established, but out-dated, heuristics and practices informed decision making with respect to the performance of factor analysis in nursing studies. Based on the findings from factor analysis research, it seems likely that the use of such methods may have had a material, adverse effect on the solutions generated. We offer recommendations for future practice with respect to each of the five decisions discussed in this paper.

Prediction of ductile failure in CP-Titanium as criterion of SPD process design

Application of damage model in combination with finite element analysis to design and optimization of equal channel angular pressing - conform of commercially pure titanium against ductile failure is demonstrated. The properties required for precise simulation of the process and prediction of damage accumulation (equivalent stress as function of equivalent strain and temperature and low bound ductility function) are obtained in the temperature interval 20-400 °C and described in details.

Elemental and molecular profiling of licit, illicit, and niche tobacco

The recognition of differences between regulated large-scale mass manufactured products and the uncontrolled cultivation of tobaccos for illicit purposes plays a significant role within identification of provenance. This research highlights X-ray fluorescence and Fourier transform infrared spectroscopy as useful analytical techniques for the rapid identification of tobacco samples of unknown provenance. Identification of key discriminative features within each technique allowed for the development of typical characteristic profiles for each type of tobacco. Analysis using X-ray fluorescence highlights chlorine, potassium, calcium and iron as key elemental indicators of tobacco provenance. Significant levels of chlorine seen within Snüs samples prompted attempts to visualise chlorine containing regions and structures within the sample. Scanning electron microscopy images showed crystalline structures visible within the Snüs tobacco, structures which Energy dispersive X-ray spectroscopy qualitatively confirmed to contain chlorine. Chloride levels within Snüs samples were quantified using ion chromatography with levels found to range between 0.87mgmL‾¹ and 1.28mg. Additionally, FTIR indicated that absorbances attributed to carbonyl stretching at 1050-1150cm‾¹, alkane bending at 1350-1480cm‾¹and amide I stretching at 1600-1700cm‾¹ highlighting a spectral fingerprint region that allowed for the clear differentiation between different types of tobaccos using PCA analysis, but was limited by differentiation between provenance of cigarettes and hand rolled tobacco. X-ray fluorescence and Fourier transform infrared spectroscopy yielded different information with regards tobacco discrimination and provenance, however both methods overall analysis time and cost reduced indicating usefulness as potential handheld analytical techniques in the field.

In situ localization associates biologically active plant natriuretic peptide immuno-analogues with conductive tissue and stomata

Plant natriuretic peptide immuno-analogues (irPNP) have previously been shown to affect a number of biological processes including stomatal guard cell movements, ion fluxes and osmoticum-dependent water transport. Tissue printing and immunofluorescent labelling techniques have been used here to study the tissue and cellular localization of irPNP in ivy (Hedera helix L.) and potato (Solanum tuberosum L.). Polyclonal antibodies active against human atrial natriuretic peptide (anti-hANP) and antibodies against irPNP from potato (anti-StPNP) were used for immunolabelling. Tissue prints revealed that immunoreactants are concentrated in vascular tissues of leaves, petioles and stems. Phloem-associated cells, xylem cells and parenchymatic xylem cells showed the strongest immunoreaction. Immunofluorescent microscopy with fluorescein isothiocyanate (FITC)-conjugated goat anti-rabbit IgG supported this finding and, furthermore, revealed strong labelling to stomatal guard cells and the adjacent apoplastic space as well. Biologically active immunoreactants were also detected in xylem exudates of a soft South African perennial forest sage (Plectranthus ciliatus E. Mey ex Benth.) thus strengthening the evidence for a systemic role of the protein. In summary, in situ cellular localization is consistent with physiological responses elicited by irPNPs reported previously and is indicative of a systemic role in plant homeostasis.

Technologies and considerations for developing internet and multiplayer computer games: a tutorial (extended abstract)

Games are universal and probably as old as humankind. Today the development of computer technology, especially the development of fast networks and the Internet, brings games a faster growth than ever before. Game design and development is now a fast-growing entertainment field, with a lot to offer professionally and creatively. In fact, from IT professional’s point of view, creating computer games provides us with all the usual technical challenges associated with software development, such as requirement analysis, architectural design, rapid prototyping, HCI, parallel and distributed processing, code reuse, programming, performance evaluation, testing and maintenance. It also provides challenges on other exciting aspects, such as storyboarding, screenplays, illustration, animation, sound effects, music, and social impact. By developing a computer game from start to finish, one would be able to acquire multi-disciplinary knowledge to become an IT professional for the modern era.