Salicylic acid suppression of clubroot in broccoli (Brassicae oleracea var. italica) caused by the obligate biotroph Plasmodiophora brassicae

The obligate soil-borne biotroph Plasmodiophora brassicae has a significant economic impact on Brassicaceae crops. The pathogen severely disrupts the roots by inducing the production of galls which leads to malformation and reduced growth of the roots and a reduced ability to take up water and nutrients. Control of P. brassicae is difficult because it has a number of survival and dissemination strategies that involve both motile and resting stages that need to be targeted by any control agent. We investigated, under controlled conditions and in glasshouse and field experiments, the potential of salicylic acid (SA), a key phytohormone, that is required for defence against certain biotic and abiotic stresses, to reduce infection by P. brassicae in broccoli (Brassicae oleracea var. italica). Under controlled conditions in a growth cabinet exogenous application of SA to roots resulted in its transport systemically to the leaves where it promoted the up-regulation of the pathogenesis related genes PR-1 and PR-2 in an SAR-like response as early as 24 h post-treatment. Concentrations of SA >20 mM reduced significantly both shoot and root weights when applied exogenously but lower concentrations had little measureable effect on plant growth. When SA was applied to plants above 5 mM there was a significant reduction (25-65 %) in gall formation 6 weeks post-inoculation with P. brassicae, indicating that the pathogen was being controlled by the addition of SA. A combination of SA and JA was also shown to reduce severity (25-35 %) of disease associated with P. brassicae. These findings indicate that there may be SA inducible mechanisms in B. oleracea that if fine-tuned could provide enhanced resistance to clubroot disease.

Impact of stresses imposed on macroinvertebrate communities in two suburban streams

The aim of the project was to determine factors which explain the distribution of macroinvertebrates in two Melbourne streams both drastically affected by urbanisation. A detailed description is given of Dandenong Creek, flowing through the south-eastern suburbs, and Darebin Creek, in the northern suburbs, emphasising stream features likely, or known, to influence the drift and benthic fauna. Faunal sampling was carried out in Dandenong Creek from June 1992 until July 1993, and in Darebin Creek from February 1995 until March 1998. Physicochemical parameters were also recorded. The collected data, together with previously existing data, were analysed using multivariate analyses: non-metric multi-dimensional scaling (NMDS); analysis of similarities (ANOSIM); matching biotic and abiotic variables using BIOENV, and principal component analysis (PCA). Various biotic and diversity indices were calculated in an attempt to identify the major factors responsible for the failure of the fauna to recover from previously more seriously degraded water quality. The contribution of drift to the colonisation potential in Dandenong Creek appeared to be impacted by retarding basins, underground barrel-draining and channelization. Results also indicated that increased conductivity adversely affected the fauna in the lower reaches of Dandenong Creek. It was concluded that in Darebin Creek, high nutrient levels, as well as other pollutants, had resulted in low macroinvertebrate diversity in both the drift and benthos. If, as this study suggests, faunal diversity is a valid measure of stream health, the following factors need to be addressed for catchment-wide, stream management: lack of riparian zone vegetation (increasing bank erosion and making the benthic habitat unstable, with greater temperature variability); control of stormwater runoff (flow variability, increased conductivity, nutrient levels, sediment loads, sewage effluent, industrial discharges and heavy metals), and to modify retarding basins to increase stream continuity.

Identification of expressed HSP`s in blacklip abalone (Haliotis rubra Leach) during heat and salinity stresses

Both prokaryotes and eukaryotes express a set of highly conserved proteins in response to external and internal stress. The stressors include tissue trauma,anoxia, heavy metal toxicity, infection, changed salinity, and the mmost characterized, heat shock. The result is an expression of stress proteins or heat shock proteins (HSP's) which lead to protection of protein integrity, and also to tolerance under continued heat stress conditions. The Australian backflip abalone (Haliotis rubra) is found principally in southern coastal water and also in estuarine/bay environments. Esturaine/bay environments have greater fluctuations in environmental conditions, especially those of salinity and water temperature, than they are found along oceanic coasts. Abalone from esturaine/bay and oceanic coastal environments were subjected to either increased temperature (2° C/day for a total of 10°C) or hyposalinity (80% seawater). Esturaine/bay abolone were less affectes than the oceanic animals by temperature increase and also demonstrated the ability to volume regualte 3 h after the initial salinity shock. SDS-PAGE and Western blotting techniques, together with dot blots of total protein, using HSP70 specific antibodies, were used to detect HSP70s in the foot muscle of the animals and indicated an expression of HSP70 in response to heat shock in abalone, but not following hyposalinity shock. RT-PCR yeilded a partial cDNA clone of HSP70 from the foot muscle.

Influence of grain size on hot working stresses and microstructures in Mg-3A1-1Zn

The influence of the grain size on the deformation of Mg–3Al–1Zn was examined in compression at 300 °C. At low strains the flow stress increases with increasing grain size. This is interpreted in terms of dynamic recrystallization. Empirical models of dynamic recrystallization are developed and employed to generate a microstructure map.

Experimental investigation and finite element analysis for the study of residual stresses in roller burnished components

Burnishing is a surface modification process, which involves plastic deformation of the material at the surface of the component due to the application a highly polished and hard roller, under pressure. This results in the improvement of the surface finish of the component and induces residual compressive stresses on the surface of the component. The present work deals with the optimization of the burnishing force for the best surface finish, at constant speed and feed, for Aluminium and Mild steel workpieces. A 3dimensional finite element model is proposed for the simulation of the burnishing process, and the analysis is carried out at the optimum force determined experimentally. The induced compressive stress in the components is determined from the finite element analysis and this value is then compared with the results obtained from X-ray diffraction technique.

Prediction of residual stresses in roller burnished components : a finite element approach

Surface finish is an important factor in creating the durable metal components, and fatigue strength can be improved if compressive residual stresses are produced in the surface. Burnishing is a finishing process and compressive residual stresses are induced during the process. The present study of minimizing the surface roughness based on the experimental work, and finite element model was developed to evaluate the analytical results. Commercial purity Mild Steel and Aluminium were selected as work specimens and a high carbon high chromium roller was used as a tool for the burnishing process.

UV induces resistance in Arabidopsis Thaliana to the Oomycete Pathogen Hyaloperonospora Parasitica

Owing to their sessile nature, plants have evolved mechanisms to minimise the damaging effects of abiotic and biotic stresses. Attack by pathogenic fungi, viruses and bacterium is a major type of biotic stress. To resist infection, plants recognise invading pathogens and induce disease resistance through multiple signal transduction pathways. In addition, appropriate stimulation can cause plants to increase their resistance to future pathogen attack. We have found that exposure to non-lethal doses of UV-C (254 nm) renders a normally susceptible ecotype of Arabidopsis thaliana resistant to the biotrophic Oomycete pathogen Hyaloperonospora parasitica. The UV treatment induces an incompatible response in a dose-dependent fashion, and is still effective upon pathogen inoculation up to seven days after UV exposure. The degree of resistance diminishes with time but higher doses result in greater levels of resistance, even after seven days. Furthermore, the effect is systemic, occurring in parts of the plant that have not been irradiated. Incubation in the dark post?irradiation and prior to infection reduces the UV dose required to generate a specific level of pathogen resistance without affecting the duration of resistance. These observations, plus the inability of plants to photoreactivate UV photoproducts in the dark, strongly suggest that DNA damage induces the resistance phenotype. Currently, we are assessing the influence of DNA repair defects on UV-induced resistance, following the expression of a number of defence?related genes post-UV-C irradiation, and assessing the effect of UV in plant mutants deficient in specific signalling molecules involved in resistance.

Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening

Laser shock peening (LSP) is an emerging surface treatment technology for metallic materials, which appears to produce more significant compressive residual stresses than those from the conventional shot peening (SP) for fatigue, corrosion and wear resistance, etc. The finite element method has been applied to simulate the laser shock peening treatment to provide the overall numerical assessment of the characteristic physical processes and transformations. However, the previous researchers mostly focused on metallic specimens with simple geometry, e.g. flat surface. The current work investigates geometrical effects of metallic specimens with curved surface on the residual stress fields produced by LSP process using three-dimensional finite element (3-D FEM) analysis and aluminium alloy rods with a middle scalloped section subject to two-sided laser shock peening. Specimens were numerically studied to determine dynamic and residual stress fields with varying laser parameters and geometrical parameters, e.g. laser power intensity and radius of the middle scalloped section. The results showed that the geometrical effects of the curved target surface greatly influenced residual stress fields.

Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening

Laser shock peening (LSP) is an emerging surface treatment technology for metallic materials, which appears to produce more significant compressive residual stresses than those from the conventional shot peening (SP) for fatigue, corrosion and wear resistance, etc. The finite element method has been applied to simulate the laser shock peening treatment to provide the overall numerical assessment of the characteristic physical processes and transformations. However, the previous researchers mostly focused on metallic specimens with simple geometry, e.g. flat surface. The current work investigates geometrical effects of metallic specimens with curved surface on the residual stress fields produced by LSP process using three-dimensional finite element (3-D FEM) analysis and aluminium alloy rods with a middle scalloped section subject to two-sided laser shock peening. Specimens were numerically studied to determine dynamic and residual stress fields with varying laser parameters and geometrical parameters, e.g. laser power intensity and radius of the middle scalloped section. The results showed that the geometrical effects of the curved target surface greatly influenced residual stress fields.

Residual thermal stresses in a Fe3Al/Al2O3 gradient coating system

To combine the merits of both metals and ceramics into one material, many researchers have been studying the deposition of alumina coating using plasma spray on metal substrates. However, as the coatings are deposited at a high temperature, residual thermal stresses develop due to the mismatch of thermal expansion coefficients of the coating and substrate and these are responsible for the initiation and expansion of cracks, which induce the possible failure of the entire material. In this paper, the residual thermal-structural analysis of a Fe3Al/Al2O3 gradient coating on carbon steel substrate is performed using finite element modelling to simulate the plasma spray. The residual thermal stress fields are obtained and analyzed on the basis of temperature fields in gradient coatings during fabrication. The distribution of residual thermal stresses including radial, axial and shear stresses shows stress concentration at the interface between the coatings and substrate. The mismatch between steel substrate and composite coating is still the dominant factor for the residual stresses

Influences of agricultural landuse and seasonal changes in abiotic conditions on invertebrate colonisation of riparian leaf detritus in intermittent streams

The structure and function of agricultural stream reaches with sparse riparian and floodplain vegetation differ from those of forested reaches, but may be ‘reset’ as these streams flow through reaches with forested riparian zones. We investigated whether invertebrate colonisation of River Red Gum (Eucalyptus camaldulensis) leaf packs in lowland intermittent streams was influenced by the adjacent reach-scale landuse (cleared farmland or forested reserve) within an agricultural catchment in Victoria, Australia. Further, we examined the influence of seasonal changes in hydrology and associated changes in abiotic conditions on the colonisation of leaves by repeating experiments over two summers and one spring. Across these experiments, there were no consistent differences in the structure of communities that colonised leaves in farmland and reserve reaches. In both seasons, most leaf colonists were collectors and few were shredders in both farmland and reserve reaches. Relative abundances of gastropod grazers were much higher in summer than in spring. The structure of invertebrate communities colonising leaves in the different reaches converged over time when streams flowed in spring, but diverged over time as the streams dried and abiotic conditions within disconnected pools became increasingly harsh in summer. Thus, patterns of leaf pack colonisation were influenced by the regional climate causing large seasonal changes in hydrology, but not by reach-scale landuse. The large-scale disturbances of agricultural landuse across the catchment and a supra-seasonal drought probably contributed to low diversities of invertebrate communities in the streams.