Alteration of GSH level, gene expression and cell transformation in NIH3T3 cells by chronic exposure to low dose of arsenic

It is well established that arsenic toxicity is postulated to be primarily due to the binding of As(III) to sulfhydryl-containing enzymes. However, the mechanism of carcinogenesis induced by arsenic is still unclear. The interaction of arsenic with GSH and related enzymes seems a very important issue regarding mechanism of arsenical induced toxicity or carcinogenesis. The purpose of this work is to investigate the effect of chronic exposure to low dose of As(III) on GSH level, gene expression and cell transformation in NIH3T3 cells. The results showed that long-term, low dose arsenic treatment makes 3T3 cell more resistant to acute arsenic treatment. There were morphology changes after long-term arsenic treatment. First, partially immortalized 3T3 cell became immortalized. In addition, the cells were doubling more quickly than the control cells and attained higher density than the control cells at confluence. Second, cells treated with 0.1 µ.M As(III) exhibited anchorage-independent growth. Arsenic could enhance GSH level at 0.5 -10 µM dose of arsenic in 24 h treatment and decrease it at 25 µM and above. In long-term treatment with low dose of arsenic, GSH levels were decreased. As(I1I) can increase both glutathione S-transferase (GST) and glutathione reductase (GR) activities at low dose (0.5-10 M), but decreased GST and GR activities at 25 M and higher dose of arsenic, while in long-term As(III) treatment, GST and GR activities are increased. Both long-term and short-term treatments with As(III) can induce GR gene expression. GPx mRNA levels were decreased both in acute and chronic arsenic treated cells. Chronic treatment with As(III) also decreased the p53 mRNA level. Taken together, our results suggest that As(III) can alter GST, GR enzyme activities as well as GSH level and related gene expression both in long-term and short-term treatment but in a different manner in different doses. Alteration of cellular GSH level by As(III) might play all important role in gene expression and arsenic induced cell transformation.

The transformation of workplace culture

A theoretical perspective is developed for the critical examination of organisation culture. A structurationist approach is taken to link interpretive and radical structuralist paradigms in this examination. The perspective is applied to investigate a change program in the New Zealand division of a multi-national Bank. The focus is on the use of culture by management to control and change employee performance, in particular to shift the branch culture from a credit and process orientation toward a sales and customer focus. Findings of research conducted at the senior management and branch workplace levels are reported. The goal of the paper is to encourage critical reflection on the beliefs, values, and understandings of organisational life that are sometimes represented as universal, but which advance particular interests. The study’s findings illustrate a range of techniques used by management to transform a workplace culture, and the various reactions of employees to these efforts, manifest in forms of acceptance, appropriation, and resistance.

Reflections on some recent corporate governance reforms in Germany. A transformation of the German aktienrecht?

Focuses on the German law reform relating to public corporations. Flaws to the German system of corporate governance; Advantages of comparative corporate governance research; Features of the German Corporate Governance Code.

Effect of deformation schedule on the microstructure and mechanical properties of a thermomechanically processed C-Mn-Si transformation-induced plasticity steel

Thermomechanical processing simulations were performed using a hot-torsion machine, in order to develop a comprehensive understanding of the effect of severe deformation in the recrystallized and nonrecrystallized austenite regions on the microstructural evolution and mechanical properties of the 0.2 wt pct C-1.55 wt pct Mn-1.5 wt pct Si transformation-induced plasticity (TRIP) steel. The deformation schedule affected all constituents (polygonal ferrite, bainite in different morphologies, retained austenite, and martensite) of the multiphased TRIP steel microstructure. The complex relationships between the volume fraction of the retained austenite, the morphology and distribution of all phases present in the microstructure, and the mechanical properties of TRIP steel were revealed. The bainite morphology had a more pronounced effect on the mechanical behavior than the refinement of the microstructure. The improvement of the mechanical properties of TRIP steel was achieved by variation of the volume fraction of the retained austenite rather than the overall refinement of the microstructure.

Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels

Two Fe-0.2C-1.55Mn-1.5Si (in wt pet) steels, with and without the addition of 0.039Nb (in wt pet), were studied using laboratory rolling-mill simulations of controlled thermomechanical processing. The microstructures of all samples were characterized by optical metallography, X-ray diffraction (XRD), and transmission electron microscopy (TEM). The microstructural behavior of phases under applied strain was studied using a heat-tinting technique. Despite the similarity in the microstructures of the two steels (equal amounts of polygonal ferrite, carbide-free bainite, and retained austenite), the mechanical properties were different. The mechanical properties of these transformation-induced-plasticity (TRIP) steels depended not only on the individual behavior of all these phases, but also on the interaction between the phases during deformation. The polygonal ferrite and bainite of the C-Mn-Si steel contributed to the elongation more than these phases in the C-Mn-Si-Nb-steel. The stability of retained austenite depends on its location within the microstructure, the morphology of the bainite, and its interaction with other phases during straining. Granular bainite was the bainite morphology that provided the optimum stability of the retained austenite.

The evolution of ultrafine ferrite formation through dynamic strain-induced transformation

Hot torsion testing of a C–Mn–V steel was used to study the evolution of  ultrafine ferrite (UFF) formation by dynamic strain-induced transformation (DSIT) in conjunction with air-cooling for two prior austenite grain sizes. This study evaluated not only the evolution of DSIT ferrite during straining, but also the grain growth behaviour of DSIT ferrite grains during post-deformation cooling. For both austenite grain sizes, the DSIT ferrite initially nucleated on/or near prior austenite grain boundaries at an early stage of transformation followed by the grain interiors. The prior austenite grain size affected the distribution of DSIT ferrite nucleation sites at an early stage of transformation and the subsequent coarsening behaviour of the grain boundary (GB) and the intragranular ferrite (IG) grains during post-deformation cooling. For the fine prior austenite grain size, the distribution of DSIT ferrite grains was more homogenous compared with the coarse austenite and the coarsening occurred not only in the GB ferrite grains but also in the IG ferrite grains. However, the ferrite coarsening mostly occurred for the IG ferrite rather than the GB ferrite grains in the coarse austenite. The result suggests that normal grain growth occurred during the overall transformation in the GB ferrite grains for the coarse initial austenite grain size.

Formation of ultrafine grained microstructures in steel through strain induced transformation during single pass hot rolling

In the present study, wedge-shape samples were used to study the effect of strain induced transformation on the formation of ultrafine grained structures in steel by single pass rolling. The results showed two different transition strains for bainite formation and ultrafine ferrite (UFF) formation in the surface layer of strip at reductions of 40% and 70%, respectively, in a plain carbon steel. The bainitic microstructure formed by strain induced bainitic transformation during single pass rolling was also very fine. The evolution of UFF formation in the surface layer showed that ferrite coarsening is significantly reduced through strain induced transformation combined with rapid cooling in comparison with the centre of the strip. In the surface, the ferrite coarsening mostly occurred for intragranular nucleated grains (IG) rather than grain boundary (GB) ferrite grains. The results suggest that normal grain growth occurred during overall transformation in the GB ferrite grains. In the centre of the strip, there was significantly more coarsening of ferrite grains nucleated on the prior austenite grain boundaries.

Effect of transformation volume contraction on the toughness of superelastic shape memory alloys

Shape memory alloys (SMAs) exhibit two very important properties: shape memory phenomenon and superelastic deformation due to intrinsic thermoelastic martensitic transformation. To fully exploit the potential of SMAs in developing functional structures or smart structures in mechanical and biomechanical engineering, it is important to understand and quantify the failure mechanisms of SMAs. This paper presents a theoretical study of the effect of phase-transformation-induced volume contraction on the fracture properties of superelastic SMAs. A simple model is employed to account for the forward and reverse phase transformation with pure volume change, which is then applied to numerically study the transformation field near the tip of a tensile crack. The results reveal that during steady-state crack propagation, the transformation zone extends ahead of the crack tip due to forward transformation while partial reverse transformation occurs in the wake. Furthermore, as a result of the volume contraction associated with the austenite-to-martensite transformation, the induced stress-intensity factor is positive. This is in stark contrast with the negative stress-intensity factor achieved in zirconia ceramics, which undergoes volume expansion during phase transformation. The reverse transformation has been found to have a negligible effect on the induced stress-intensity factor. An important implication of the present results is that the phase transformation with volume contraction in SMAs tends to reduce their fracture resistance and increase the brittleness.

The effect of Nb, Mo, and A1 additions on the transformation behaviour and mechanical properties of thermomechanically processed C-Si-Mn trip steel

The effect of additions of Nb, A1 and Mo to Fe-C-Mn-Si TRIP steels on the final microstructure and mechanical properties after simulated thermomechanical processing (TMP) has been studied. Laboratory simulations of continuous cooling during TMP were performed using a quench deformation dilatometer, while laboratory simulations of discontinuous cooling during TMP were performed using a hot rolling mill. From this a comprehensive understanding of the structural and kinetic aspects of the bainite transformation in these types of TRIP steels has been developed. All samples were characterised using optical microscopy and XRD. The relationships between the morphology of bainitic structure, volume fraction, stability of RA and mechanical properties were investigated.

Organisational transformation through CRM implementation: a descriptive case study

CRM is becoming critical to organisations worldwide as global competition increases and technological innovations in communication continue to emerge. In this descriptive case study, we have investigated a utility provider – with a geographical monopoly, who has successfully implemented a complaint management system, as part of their CRM process transformation. We have applied the teleological process theory (Ven de Ven and Poole 1995) to describe the organisational change, based on our empirical research.