Design earthquake ground motion prediction for Perth metropolitan area with microtremor measurements for site characterization

Perth is the largest city in Western Australia and home to three-quarters of the state's residents. In recent decades, there have been a lot of earthquake activities just east of Perth in an area known as the South-West Seismic Zone. Previous numerical results of site response analyses based on limited available geology information for PMA indicated that Perth Basin might amplify the bedrock motion by more than 10 times at some frequencies and at some sites. Hence, more detailed studies on site characterization and amplification are necessary. The microtremor method using spatial autocorrelation (SPAC) processing is a useful tool for gaining thickness and shear wave velocity (SWV) of sediments and has been adopted in many previous studies. In this study, the response spectrum of rock site corresponding to the 475-year return period for PMA is defined according to the probabilistic seismic hazard analysis (PSHA) based on the latest ground motion attenuation model of Southwest Western Australia. Site characterization in PMA is performed using two microtremor measurements, namely SPAC technique and H/V method. The clonal selection algorithm (CSA) is introduced to perform direct inversion of SPAC curves to determine the soil profiles of representative PMA sites investigated in this study. Using the simulated bedrock motion as input, the responses of the soil sites are estimated using numerical method based on the shear-wave velocity vs. depth profiles determined from the SPAC technique. The response spectrum of the earthquake ground motion on surface of each site is derived from the numerical results of the site response analysis, and compared with the respective design spectrum defined in the Australian Earthquake Loading Code. The comparison shows that the code spectra are conservative in the short period range, but may slightly underestimate the response spectrum at some long period range.

Comparisons of seismic rock slope stability assessments between the Hoek-Brown and Mohr-Coulomb failure criteria

Current investigations have shown that earthquakes can trigger significant damages of equipment, property infrastructure and environment. This is a persistent cause of economic loss for any country, especially for the loss of life. The conventional method for slope stability design is to utilize limit equilibrium method (LEM) in conjunction with the pseudo-static (PS) approach. However, the LEM has a significant drawback which is to determine the slip surface before factor of safety calculation. The numerical upper and lower bound limit analysis method employed in this paper can avoid this limitation. In this study, the presented slope stability evaluations considering earthquake effects based on the finite difference method will be discussed and compared with the results from the numerical limit analysis methods.

Evaluation of numerical procedures to determine seismic response of structures under influence of soil-structure interaction

In this study, the accuracy and reliability of fully nonlinear method against equivalent linear method for dynamic analysis of soil-structure interaction is investigated comparing the predicted results of both numerical procedures with the results of experimental shaking table tests. An enhanced numerical soil-structure model has been developed which treats the behaviour of the soil and the structure with equal rigour. The soil-structural model comprises a 15 storey structural model resting on a soft soil inside a laminar soil container. The structural model was analysed under three different conditions: (i) fixed base model performing conventional time history dynamic analysis, (ii) flexible base model (considering full soil-structure interaction) conducting equivalent linear dynamic analysis, and (iii) flexible base model performing fully nonlinear dynamic analysis. The results of the above mentioned three cases in terms of lateral storey deflections and inter-storey drifts are determined and compared with the experimental results of shaking table tests. Comparing the experimental results with the numerical analysis predictions, it is noted that equivalent linear method of dynamic analysis underestimates the inelastic seismic response of mid-rise moment resisting building frames resting on soft soils in comparison to the fully nonlinear dynamic analysis method. Thus, inelastic design procedure, using equivalent linear method, cannot adequately guarantee the structural safety for mid-rise building frames resting on soft soils. However, results obtained from the fully nonlinear method of analysis fit the experimental results reasonably well. Therefore, this method is recommended to be used by practicing engineers.