An investigation into using SAP-PS as a multidimensional project control system (MPCS)

This paper investigates the effectiveness of using a corporate enterprise resource planning (ERP) system as a multi-dimensional project control system (MPCS) to monitor and control the work performed on projects, meet the needs and expectations of the project managers and support the requirements of other key stakeholders. A qualitative approach i.e. case study interviews and literature review accompanied by a quantitative computer system validation test approach was deployed. The results from this study suggest that the corporate ERP system is effective at monitoring and controlling the project stakeholder success criteria within a fully integrated environment. The system does however need to be setup and configured for the purpose of MPCS. This study contributes to the field by providing empirical evidence that corporate ERP systems are likely one of the only systems truly capable of solving the age old problem of how to expand the traditional singular dimensional approaches commonly used in project control, thus multiple control dimensions are integrated with each other and other business systems to form a multi-dimensional project control system.

A signal processing approach for elastic wave-based structural health monitoring using active piezoelectrics

A series of digital frequency filters (DFFs) were designed to screen diverse noises and the spectrographic analysis was conducted to isolate complex boundary reflection, which obscures the damage-induced signals. The scale-averaged wavelet power (SAP) technique was applied to enhance
the measurement accuracy of Time of Flight (TOF). As an example, the propagation characteristics of elastic wave in a structural beam of square cross-section were analyzed using such an approach and verified experimentally and numerically, with the consideration of the complicated wave scatter caused by the non-ignorable section dimensions.

A systematic approach to writing and rating entrepreneurial business plans

This investigation provides the predicate for an intended series of studies in the field of Venture Capital deal screening. At issue is the use of theory-based standards for systematic creation and assessment of entrepreneurial business plans. A systems based approach guided synthesis of research-based principles contained in the literature. Results culminated in the formal articulation and operationalization of 10 principles in the form of a questionnaire (entitled EBPAR, for ‘entrepreneurial business plan evaluation regime’). The instrument can serve dual duty as a guide for writing and a regime for rating Entrepreneurial Business Plans. Discussion focused on utility of the assessment regime and future research directions.

Glaucomatous visual field progression with frequency-doubling technology and standard automated perimetry in a longitudinal prospective study

PURPOSE. To compare frequency-doubling technology (FDT) perimetry with standard automated perimetry (SAP) for detecting glaucomatous visual field progression in a longitudinal prospective study.

METHODS. One eye of patients with open-angle glaucoma was tested every 6 months with both FDT and SAP. A minimum of 6 examinations with each perimetric technique was required for inclusion. Visual field progression was determined by two methods: glaucoma change probability (GCP) analysis and linear regression analysis (LRA). For GCP, several criteria for progression were used. The number of locations required to classify progression with FDT compared with SAP, respectively, was 1:2 (least conservative), 1:3, 2:3, 2:4, 2:6, 2:7, 3:6, 3:7, and 3:10 (most conservative). The number of consecutive examinations required to confirm progression was 2-of-3, 2-of-2, and 3-of-3. For LRA, the progression criterion was any significant decline in mean threshold sensitivity over time in each of the following three visual field subdivisions: (1) all test locations, (2) locations in the central 10° and the superior and inferior hemifields, and (3) locations in each quadrant. Using these criteria, the proportion of patients classified as showing progression with each perimetric technique was calculated and, in the case of progression with both, the differences in time to progression were determined.

RESULTS. Sixty-five patients were followed for a median of 3.5 years (median number of examinations, 9). For the least conservative GCP criterion, 32 (49%) patients were found to have progressing visual fields with FDT and 32 (49%) patients with SAP. Only 16 (25%) patients showed progression with both methods, and in most of those patients, FDT identified progression before SAP (median, 12 months earlier). The majority of GCP progression criteria (15/27), classified more patients as showing progression with FDT than with SAP. Contrary to this, more patients showed progression with SAP than FDT, when analysed with LRA; e.g., using quadrant LRA 20 (31%) patients showed progression with FDT, 23 (35%) with SAP, and only 10 (15%) with both.

CONCLUSIONS. FDT perimetry detected glaucomatous visual field progression. However, the proportion of patients who showed progression with both FDT and SAP was small, possibly indicating that the two techniques identify different subgroups of patients. Using GCP, more patients showed progression with FDT than with SAP, yet the opposite occurred using LRA. As there is no independent qualifier of progression, FDT and SAP progression rates vary depending on the method of analysis and the criterion used.

Real-time measurement of phloem turgor pressure in Hevea brasiliensis with a modified cell pressure probe

Background: Although the pressure flow theory is widely accepted for the transport of photoassimilates in phloem sieve elements, it still requires strong experimental validation. One reason for that is the lack of a precise method for measuring the real-time phloem turgor pressure from the sink tissues, especially in tree trunks. Results: Taking the merits of Hevea brasiliensis, a novel phloem turgor pressure probe based on the state of the art cell pressure probe was developed. Our field measurements showed that the phloem turgor pressure probe can sensitively measure the real-time variation of phloem turgor pressure in H. brasiliensis but the calculation of phloem turgor pressure with xylem tension, xylem sap osmotic potential and phloem sap osmotic potential will under-estimate it. The measured phloem turgor pressure gradient in H. brasiliensis is contrary to the Münch theory. The phloem turgor pressure of H. brasiliensis varied from 8-12 bar as a consequence of water withdrawal from transpiration. Tapping could result in a sharp decrease of phloem turgor pressure followed by a recovery from 8-45 min after the tapping. The recovery of phloem turgor pressure after tapping and its change with xylem sap flow suggest the importance of phloem water relationship in the phloem turgor pressure regulation. Conclusion: The phloem turgor pressure probe is a reliable technique for measuring the real-time variation of phloem turgor pressures in H. brasiliensis. The technique could probably be extended to the accurate measurement of phloem turgor pressure in other woody plants which is essential to test the Münch theory and to investigate the phloem water relationship and turgor pressure regulation. © 2014 An et al.

Self-assembled peptide nanostructures for the fabrication of cell scaffolds

The fabrication of artificial scaffolds that effectively mimic the host environment of the cell have exciting potential for the treatment of many diseases in regenerative medicine. In particular, appropriately designed scaffolds have the capacity to support, replace, and mediate the transplantation of therapeutic cells in order to regenerate damaged or diseased tissues. To achieve these goals for regeneration, the engineering of an environment structurally similar to the native extracellular matrix (ECM) is necessary in order to closely match the chemical and physical conditions found within the extracellular niche. Recently, self-assembled peptide (SAP) hydrogels have shown great potential for such biological applications due to their inherent biocompatibility, propensity to form higher order structures, rich chemical functionality and ease of synthesis. Importantly, it is possible to control the organization and properties of the target materials as the chemical structure is determined by amino acid sequence. Here, the development of SAP hydrogels as functional cell scaffolds and useful tools in tissue engineering is reviewed.

Elemental and metabolite profiling of nickel hyperaccumulators from New Caledonia

Leaf material from nine Ni hyperaccumulating species was collected in New Caledonia: Homalium kanaliense (Vieill.) Briq., Casearia silvana Schltr, Geissois hirsuta Brongn. & Gris, Hybanthus austrocaledonicusSeem, Psychotria douarrei (G. Beauvis.) Däniker, Pycnandra acuminata (Pierre ex Baill.) Swenson & Munzinger (syn Sebertia acuminata Pierre ex Baill.), Geissois pruinosa Brongn. & Gris, Homalium deplanchei (Viell) Warb. and Geissois bradfordii (H.C. Hopkins). The elemental concentration was determined by inductively-coupled plasma optical emission spectrometry (ICP-OES) and from these results it was foundthat the species contained Ni concentrations from to 250–28,000 mg/kg dry mass. Gas chromatography mass spectrometry (GC–MS)-based metabolite profiling was then used to analyse leaves of each species.The aim of this study was to target Ni-binding ligands through correlation analysis of the metabolite levels and leaf Ni concentration. Approximately 258 compounds were detected in each sample. As has been observed before, a correlation was found between the citric acid and Ni concentrations in the leaves for all species collected. However, the strongest Ni accumulator, P. douarrei, has been found to contain particularly high concentrations of malonic acid, suggesting an additional storage mechanism for Ni. A size exclusion chromatography separation protocol for the separation of Ni-complexes in P. acuminata sap was also applied to aqueous leaf extracts of each species. A number of metabolites were identified in complexes with Ni including Ni-malonate from P. douarrei. Furthermore, the levels for some metabolites were found to correlate with the leaf Ni concentration. These data show that Ni ions can be bound by a range of small molecules in Ni hyperaccumulation in plants.

Characterisation of minimalist co-assembled fluorenylmethyloxycarbonyl self-assembling peptide systems for presentation of multiple bioactive peptides

The nanofibrillar structures that underpin self-assembling peptide (SAP) hydrogels offer great potential for the development of finely tuned cellular microenvironments suitable for tissue engineering. However, biofunctionalisation without disruption of the assembly remains a key issue. SAPS present the peptide sequence within their structure, and studies to date have typically focused on including a single biological motif, resulting in chemically and biologically homogenous scaffolds. This limits the utility of these systems, as they cannot effectively mimic the complexity of the multicomponent extracellular matrix (ECM). In this work, we demonstrate the first successful co-assembly of two biologically active SAPs to form a coassembled scaffold of distinct two-component nanofibrils, and demonstrate that this approach is more bioactive than either of the individual systems alone. Here, we use two bioinspired SAPs from two key ECM proteins: Fmoc-FRGDF containing the RGD sequence from fibronectin and Fmoc-DIKVAV containing the IKVAV sequence from laminin. Our results demonstrate that these SAPs are able to co-assemble to form stable hybrid nanofibres containing dual epitopes. Comparison of the co-assembled SAP system to the individual SAP hydrogels and to a mixed system (composed of the two hydrogels mixed together post-assembly) demonstrates its superior stable, transparent, shear-thinning hydrogels at biological pH, ideal characteristics for tissue engineering applications. Importantly, we show that only the coassembled hydrogel is able to induce in vitro multinucleate myotube formation with C2C12 cells. This work illustrates the importance of tissue engineering scaffold functionalisation and the need to develop increasingly advanced multicomponent systems for effective ECM mimicry.

STATEMENT OF SIGNIFICANCE: Successful control of stem cell fate in tissue engineering applications requires the use of sophisticated scaffolds that deliver biological signals to guide growth and differentiation. The complexity of such processes necessitates the presentation of multiple signals in order to effectively mimic the native extracellular matrix (ECM). Here, we establish the use of two biofunctional, minimalist self-assembling peptides (SAPs) to construct the first co-assembled SAP scaffold. Our work characterises this construct, demonstrating that the physical, chemical, and biological properties of the peptides are maintained during the co-assembly process. Importantly, the coassembled system demonstrates superior biological performance relative to the individual SAPs, highlighting the importance of complex ECM mimicry. This work has important implications for future tissue engineering studies.