68 resultados para Robust controller design

em Deakin Research Online - Australia


Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents a robust nonlinear distributed controller design for islanded operation of microgrids in order to maintain active and reactive power balance. In this paper, microgrids are considered as inverter-dominated networks integrated with renewable energy sources (RESs) and battery energy storage systems (BESSs), where solar photovoltaic generators act as RESs and plug-in hybrid electric vehicles as BESSs to supply power into the grid. The proposed controller is designed by using partial feedback linearization and the robustness of this control scheme is ensured by considering structured uncertainties within the RESs and BESSs. An approach for modeling the uncertainties through the satisfaction of matching conditions is also provided in this paper. The proposed distributed control scheme requires information from local and neighboring generators to communicate with each other and the communication among RESs, BESSs, and control centers is developed by using the concept of the graph theory. Finally, the performance of the proposed robust controller is demonstrated on a test microgrid and simulation results indicate the superiority of the proposed scheme under different operating conditions as compared to a linear-quadratic-regulator-based controller.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents a robust nonlinear controller design for a three-phase grid-connected photovoltaic (PV) system to control the current injected into the grid and the dc-link voltage for extracting maximum power from PV units. The controller is designed based on the partial feedback linearization approach, and the robustness of the proposed control scheme is ensured by considering structured uncertainties within the PV system model. An approach for modeling the uncertainties through the satisfaction of matching conditions is provided. The superiority of the proposed robust controller is demonstrated on a test system through simulation results under different system contingencies along with changes in atmospheric conditions. From the simulation results, it is evident that the robust controller provides excellent performance under various operating conditions. © 2014 IEEE.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents a nonlinear robust adaptive excitation controller design for a simple power system model where a synchronous generator is connected to an infinite bus. The proposed controller is designed to obtain the adaption laws for estimating critical parameters of synchronous generators which are considered as unknown while providing the robustness against the bounded external disturbances. The convergence of different physical quantities of a single machine infinite bus (SMIB) system, with the proposed control scheme, is ensured through the negative definiteness of the derivative of Lyapunov functions. The effects of external disturbances are considered during formulation of Lyapunov function and thus, the proposed excitation controller can ensure the stability of the SMIB system under the variation of critical parameters as well as external disturbances including noises. Finally, the performance of the proposed scheme is investigated with the inclusion of external disturbances in the SMIB system and its superiority is demonstrated through the comparison with an existing robust adaptive excitation controller. Simulation results show that the proposed scheme provides faster responses of physical quantities than the existing controller.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper proposes a new approach to design a robust adaptive backstepping excitation controller for multimachine power systems in order to reject external disturbances. The parameters which significantly affect the stability of power systems (also called stability sensitive parameters) are considered as unknown and the external disturbances are incorporated into the power system model. The proposed excitation controller is designed in such a way that it is adaptive to the unknown parameters and robust to external disturbances. The stability sensitive parameters are estimated through the adaptation laws and the convergences of these adaptation laws are obtained through the negative semi-definiteness of control Lyapunov functions (CLFs). The proposed controller not only provides robustness property against external disturbances but also overcomes the over-parameterization problem of stability sensitive parameters which usually appears in some conventional adaptive methods. Finally, the performance of the proposed controller is tested on a two-area four machine 11-bus power system by considering external disturbances under different scenarios and is compared to that of an existing nonlinear adaptive backstepping controller. Simulation results illustrate the robustness of the proposed controller over an existing one in terms of rejecting external disturbances.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In modern power electronic systems, DC-DC converter is one of the main controlled power sources for driving DC systems. But the inherent nonlinear and time-varying characteristics often result in some difficulties mostly related to the control issue. This paper presents a robust nonlinear adaptive controller design with a recursive methodology based on the pulse width modulation (PWM) to drive a DC-DC buck converter. The proposed controller is designed based on the dynamical model of the buck converter where all parameters within the model are assumed as unknown. These unknown parameters are estimated through the adaptation laws and the stability of these laws are ensured by formulating suitable control Lyapunov functions (CLFs) at different stages. The proposed control scheme also provides robustness against external disturbances as these disturbances are considered within the model. One of the main features of the proposed scheme is that it overcomes the over-parameterization problems of unknown parameters which usually appear in some conventional adaptive methods. Finally, the effectiveness of the proposed control scheme is verified through the simulation results and compared to that of an existing adaptive backstepping controller. Simulation results clearly indicate the performance improvement in terms of a faster output voltage tracking response.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents a new robust nonlinear excitationcontroller design for synchronous generators in multimachine powersystems to enhance the transient stability. The mismatches betweenthe original power system model and formulated mathematical modelare considered as uncertainties which are modeled through thesatisfaction of matching conditions. The exogenous noises appearingfrom measurements are incorporated with the power system modelincluding the two-axis model of synchronous generators. The partialfeedback linearization technique is used to design the controller whichtransforms the original nonlinear multimachine power system modelinto several reduced-order linear and autonomous subsystems. Thedesired control law is obtained for each subsystem and implemented ina decentralized manner provided that the dynamics of the autonomoussubsystems have no effects on the overall stability of the system. Theanalysis related to the dynamics of noisy autonomous subsystems isalso included and the proposed controller has the excellent capabilityto decouple these noises. Finally, the performance of the proposedcontrol scheme is evaluated on an IEEE 39-bus benchmark powersystem following different types of large disturbances. The performanceof the proposed controller is compared to that of a partialfeedback linearizing controller, which is designed without robustnessproperties, to verify the effectiveness of the proposed control scheme.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents a methodology to identify robust operating regions through the selection of controllable factory variables, using discrete event simulation. A casting plant melt facility was used as an industrial test bed to develop these techniques. A robust system design was determined by response surface analysis of key production parameters. Furthermore, robust operating policies that maximise throughput, while minimizing work-in-progress and thus energy consumption were identified.


Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper considers the problem of designing an observer-based output feedback controller to exponentially stabilize a class of linear systems with an interval time-varying delay in the state vector. The delay is assumed to vary within an interval with known lower and upper bounds. The time-varying delay is not required to be differentiable, nor should its lower bound be zero. By constructing a set of Lyapunov–Krasovskii functionals and utilizing the Newton–Leibniz formula, a delay-dependent stabilizability condition which is expressed in terms of Linear Matrix Inequalities (LMIs) is derived to ensure the closed-loop system is exponentially stable with a prescribed α-convergence rate. The design of an observerbased output feedback controller can be carried out in a systematic and computationally efficient manner via the use of an LMI-based algorithm. A numerical example is given to illustrate the design procedure.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In this paper, a nonlinear backstepping controller is designed for three-phase grid-connected solar photovoltaic (PV) systems to share active and reactive power. A cascaded control structure is considered for the purpose of sharing appropriate amount of power. In this cascaded control structure, the dc-link voltage controller is designed for balancing the power flow within the system and the current controller is designed to shape the grid current into a pure sinusoidal waveform. In order to balance the power flow, it is always essential to maintain a constant voltage across the dc-link capacitor for which an incremental conductance (IC) method is used in this paper. This approach also ensures the operation of solar PV arrays at the maximum power point (MPP) under rapidly changing atmospheric conditions. The proposed current controller is designed to guarantee the current injection into the grid in such a way that the system operates at a power factor other than unity which is essential for sharing active and reactive power. The performance of the proposed backstepping approach is verified on a three-phase grid-connected PV system under different atmospheric conditions. Simulation results show the effectiveness of the proposed control scheme in terms of achieving desired control objectives.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents a nonlinear adaptive excitation control scheme to enhance the dynamic stability of multimachine power systems. The proposed controller is designed based on the adaptive backstepping technique where the mechanical power input to the generators and the damping coefficient of each generator are considered as unknown. These unknown quantities are estimated through the adaption laws. The adaption laws are obtained from the formulation of Lyapunov functions which guarantee the convergence of different physical quantities of generators such as the relative speed, terminal voltage, and electrical power output. The proposed scheme is evaluated by applying a three-phase short-circuit fault at one of the key transmission lines in an 11-bus test power system and compared with an existing backstepping controller and conventional power system stabilizer (CPSS). Simulation results show that the proposed scheme is much more effective than existing controllers.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents a nonlinear controller design for vehicle-to-grid (V2G) systems with LCL output filters. The V2G systems are modeled with LCL output filters in order to eliminate harmonics for improving power qualities and the nonlinear controller is designed based on the feedback linearization. The feasibility of using the appropriate feedback linearization approaches, either partial or exact, is also investigated through the feedback linearizability of V2G systems. In this paper, partial feedback linearization is used to design the controller with a capability of sharing both active and reactive power in V2G systems. The performance of the proposed controller controller is evaluated on a single-phase full-bridge converter-based V2G system with an LCL output filter and compared to that of without any filter. Simulation results clearly demonstrate the harmonic elimination capabilities of the proposed V2G structure with the proposed control scheme.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents a new approach to design excitation controller for power systems to enhance small-signal stability. Partial feedback linearization scheme is used to design the controller for a linearized power system model which transforms a part of this model into a new system through linear coordinate transformation. In this paper, the excitation control law as a function of state variables is determined from the dynamics of the partly transformed new system provided that the controller stabilizes the remaining dynamics of the system which are not transformed through feedback linearization. The stability of the remaining dynamics is also discussed in this paper. Since the proposed control scheme uses state variables as feedback, it is analogous to a linear quadratic regulator (LQR) based excitation controller. Therefore, the performance of the proposed scheme is evaluated on a single machine infinite bus (SMIB) system and compared to that of an LQR controller.