Properties of ectin isolated from Lawulu (Crysophylum roxbergi G Don) and development of jam and fruit leather using Lawulu and pineapple

Lawulu fruit (Crysophylum roxberghi GDon) possess nutritional, medicinal and functional properties. However, it is less consumed due to its  characteristic off flavour. The present study was carried out to investigate the potential of utilizing lawulu fruit for isolation of pectin and to develop jam and fruit leather. Products were evaluated based on physico-chemical and sensory properties.

Pectin isolated fromf irm ripe lawuluf ruit using 0.1 M hydrochloric acid  followed by 96% ethanol precipitation yielded 7. 3% pectin on wet weight basis and 26.1% on dry weight basis. The isolated pectin contained 0.74% ash, 0.02% acetyl content and 7.85% methoxyl content with equivalent weight 993.5. These values were comparable with commercial high methoxyl pectin. In addition, Iawulu pectin at 1.5% concentration formed a gel within 12-14 min in the presence of 68% sucrose and 0.5% citric acid.

Jam was prepared by using Iawulu-pineapple ratio as 1:2, 1:1 and 2:1 respectively. The gel strength of jam (65⁰ Brix and pH 3.1) at 0.35% commercial high methoxyl pectin was comparable with commercial mixed fruit jam. Sensory evaluation indicated a significant preference (p<.05) for jam containing lawulu-pineapple ratio of 1:2 and 1.1 respectively overthe ratio of 2:1. With increased lawulu percentage both yellowness and lightness of jam increased significantly (p<0.05).

Fruit leather was prepared by changing lawulu-pineapple ratio as 1:2, 1:1 and 2:1 respectively with 20% sucrose, 0.3% citric acid, 0.05% pectin and 100 ppm potassium metabisulphite followed by drying at 65±1⁰C for 12-14 h. Sensory evaluation data revealed that changes in lawulu-pineapple ratio had no significant effect on taste, texture and overall quality of fruit leather.   However, significant preference (p<0.05) for colour was observed with increasing lawulu percentage. Both yellowness (b' value) and lightness (L'value) of fruit leather were sign[icantly increased (p<0.05) with increasing lawulu percentage.

Determining residual gum content of bast fibres

The measurement of fibre quality in bast fibres is related to the amount of gum (lignin, hemicellulose, wax and pectin) left in the fibre after the retting process. Large amounts of gums present represent poor separation of fibre. Efficiency of retting can be monitored by measuring the residual gum content of the retted fibre.

This paper investigated the use of ultrasonic vibration combined with chemical retting as a pre-treatment to improve accuracy of traditional residual gum content test. Work was conducted on chemically retted hemp fibre. Pre-treatment conditions were analysed by determining the best chemical combination, chemical concentration and treatment time. Fibres were examined for successful separation using optical microscopy and optical fibre diameter analysis (OFDA). The work proposed a new method for determining the residual gum content of hemp fibre.