Milled non-mulberry silk fibroin microparticles as biomaterial for biomedical applications

Silk fibroin has been widely employed in various forms as biomaterials for biomedical applications due to its superb biocompatibility and tunable degradation and mechanical properties. Herein, silk fibroin microparticles of non-mulberry silkworm species (Antheraea assamensis, Antheraea mylitta and Philosamia ricini) were fabricated via a top-down approach using a combination of wet-milling and spray drying techniques. Microparticles of mulberry silkworm (Bombyx mori) were also utilized for comparative studies. The fabricated microparticles were physico-chemically characterized for size, stability, morphology, chemical composition and thermal properties. The silk fibroin microparticles of all species were porous (∼5μm in size) and showed nearly spherical morphology with rough surface as revealed from dynamic light scattering and microscopic studies. Non-mulberry silk microparticles maintained the typical silk-II structure with β-sheet secondary conformation with higher thermal stability. Additionally, non-mulberry silk fibroin microparticles supported enhanced cell adhesion, spreading and viability of mouse fibroblasts than mulberry silk fibroin microparticles (p<0.001) as evidenced from fluorescence microscopy and cytotoxicity studies. Furthermore, in vitro drug release from the microparticles showed a significantly sustained release over 3 weeks. Taken together, this study demonstrates promising attributes of non-mulberry silk fibroin microparticles as a potential drug delivery vehicle/micro carrier for diverse biomedical applications.

Drug release rate and anti-microbial effect of controlled-diffusion biopolymer membranes

In this study, a series of fibrous membranes made from cellulose acetate (CA) and polyester urethane (PEU) by co-electrospining or blend-electrospining were evaluated for drug release kinetics, in vitro anti-microbial activity and in vivo would healing performance when used as wound dressings. To stop common clinical infections, an antibacterial agent, Polyhexamethylene Biguanide (PHMB) was incorporated into e-spun fibres. The presence of CA in the wound healing membrane was found to improve hydrophilicity and permeability to air and moisture. The in vivo tests indicated that the addition of PHMB and CA considerably improved the wound healing efficiency. CA fibres became slightly swollen upon contacting with the wound exudates. It can not only speed up the liquid evaporation but also create a moisture environment for wound recovery. The drug release dynamics of membranes was controlled by the structure of membranes and component rations within membranes. The lower ration of CA:PEU retained the sound mechanical properties of membranes, and also reduced the boost release effectively and slowed down diffusion of antibacterial agent during in vitro tests. The controlled-diffusion membranes exert long-term anti-infective effect.

Amylase and glucosidase enzyme inhibitory activity of ginger (Zingiber officinale Roscoe) an in vitro study

The prevalence of type 2 diabetes has reached to an epidemic proportion in Sri Lanka. The need for achieving better control of blood glucose level has been evident in diabetes management. However it is not easy to achieve this goal in a large proportion of patients. This is partly due to limitations of currently available pharmacological agents which stimulate research on novel anti-diabetic agents with different mechanisms. Digestive enzymes have been targeted as potential avenues for modulation of blood glucose concentration through inhibition of the enzymatic breakdown of complex carbohydrates to meal derived glucose absorption. Acarbose is a widely used oral anti-diabetic drug which inhibits the α-glucosidase, enzyme responsible for breaking down of disaccharides and polysaccharides into glucose. Many herbal extracts have been found to posses similar inhibitory effects. Ginger (Zingiber officinale Roscoe) has developed a reputation in treatment of several diseases. In vitro enzymic inhibitory effect of ginger was investigated in this study. Enzymes α -amylase and α -glucosidase treated with either Acarbose or ginger extract were allowed to react with cooked rice and percentages of glucose content were measured. The glucosidase and amylase activities on the rice were inhibited by addition of ginger cause significant reduction in glucose percentages (36.86± 1.05 to 26.87± 2.17, P<0.05 and 49.04±0.65 to 35.35±2.22, P<0.05) which showed comparable results with Acarbose on glucosidase activity (36.86± 1.05 to, 27.8±1.32 P<0.05). Results of the study indicates ginger as a potential plant based amylase and glucosidase inhibitor in carbohydrate digestion but usage in glycaemic control in human has to be investigated further.

An aqueous Chlorella extract inhibits IL-5 production by mast cells in vitro and reduces ovalbumin-induced eosinophil infiltration in the airway in mice in vivo

An aqueous extract of the edible microalga, Chlorella pyrenoidosa (CP) (1), has recently been tested for its immunomodulatory effects in a human clinical trial. Here, the CP extract was dialyzed and fractionated using Sephadex G 100 chromatography. The effects of a dialyzed aqueous CP extract, fraction 2, on mast cell mediator release in vitro and ovalbumin-induced allergic airway inflammation in vivo were examined. In vitro, treatment of mouse bone marrow-derived mast cells with 2 for 18 h significantly inhibited antigen (trinitrophenyl-BSA)-induced IL-5 production. In vivo, treatment of mice with 2 during ovalbumin sensitization and stimulation process significantly reduced eosinophil and neutrophil infiltration in the airways. Moreover, fractions obtained by size exclusion chromatography of 2 inhibited IgE-dependent cytokine GM-CSF production from human cord blood-derived mast cells. Taken together, these results suggest that 2 is composed of biopolymers with anti-allergic potential.

Properties of an in vitro selected Pb2+ cleavage motif

The addition of Pb 2+ to a small RNA molecule consisting of an asymmetric internal loop of six nucleotides results in site-specific cleavage followed by hydrolysis of the 2′,3′-cyclic phosphate intermediate [Pan, T., & Uhlenbeck, O. C. (1992) Nature 358, 560-563]. Here we show that the reaction is highly specific for Pb 2+ and the cleavage rate increases exponentially with pH from 5.5 to 7.0, both in the presence and in the absence of Mg 2+. This suggests that the reaction mechanism involves Pb 2+ hydroxide acting as a base. Several sequence variants of the RNA are found to be equally active in both steps of the reaction, suggesting that they fold into a similar structure.

The antimicrobial efficacy of elaeis guineensis : characterization, in Vitro and in Vivo studies

The urgent need to treat multi-drug resistant pathogenic microorganisms in chronically infected patients has given rise to the development of new antimicrobials from natural resources. We have tested Elaeis guineensis Jacq (Arecaceae) methanol extract against a variety of bacterial, fungal and yeast strains associated with infections. Our studies have demonstrated that E. guineensis exhibits excellent antimicrobial activity in vitro and in vivo against the bacterial and fungal strains tested. A marked inhibitory effect of the E. guineensis extracts was observed against C. albicans whereby E. guineensis extract at =, 1, or 2 times the MIC significantly inhibited C. albicans growth with a noticeable drop in optical density (OD) of the bacterial culture. This finding confirmed the anticandidal activity of the extract on C. albicans. Imaging using scanning (SEM) and transmission (TEM) electron microscopy was done to determine the major alterations in the microstructure of the extract-treated C. albicans. The main abnormalities noted via SEM and TEM studies were the alteration in morphology of the yeast cells. In vivo antimicrobial activity was studied in mice that had been inoculated with C. albicans and exhibited good anticandidal activity. The authors conclude that the extract may be used as a candidate for the development of anticandidal agent.

RAFT controlled synthesis of graphene/polymer hydrogel with enhanced mechanical property for pH-controlled drug release

A pH-sensitive, mechanically strong and thermally stable graphene/poly (acrylic acid) (graphene/PAA) hydrogel was prepared via reversible addition fragmentation transfer (RAFT) polymerizations in the presence of a cross-linking agent. The RAFT agent was covalently coupled onto graphene basal planes via an esterification reaction, with benzoic acid functionalities pre-attached on graphene with its aryl diazonium salt precursor. AFM and SEM analysis revealed the successful preparation of single layered graphene sheets and graphene/polymer hydrogels with pH controlled porous structures. Attenuated total reflection infrared (ATR-IR) and thermogravimetric analyzer (TGA) verified the successful stepwise preparation of graphene/PAA hydrogel. This graphene/PAA hydrogel was pH-sensitive and more mechanically elastic than the PAA hydrogel prepared without graphene. The pH sensitivity of the hydrogel was further utilized for controlled drug release. Doxorubicin was chosen as a model drug and loaded into the hydrogels. The drug loading and release experiment indicated that this hydrogel can be used to efficiently control drug release in the intestine environment (pH = 7.4), better than release in a more acidic environment.© 2013 Elsevier Ltd. All rights reserved.

A novel graphene nanodots inlaid porous gold electrode for electrochemically controlled drug release

A uniform graphene nanodots inlaid porous gold electrode was prepared via ion beam sputtering deposition (IBSD) and mild corrosion chemistry. HRTEM, SEM, AFM and XPS analyses revealed the successful fabrication of graphene nanodots inlaid porous gold electrode. The as-prepared porous electrode was used as π-orbital-rich drug loading platform to fabricate an electrochemically controlled drug release system with high performance. π-orbital-rich drugs with amino mioety, like doxorubicin (DOX) and tetracycline (TC), were loaded into the graphene nanodots inlaid porous gold electrode via non-covalent π-π stacking interaction. The amino groups in DOX and TC can be easily protonated at acidic medium to become positively-charged NH3(+), which allow these drug molecules to be desorbed from the porous electrode surface via electrostatic repulsion when positive potential is applied at the electrode. The drug loading and release experiment indicated that this graphene nanodots inlaid porous gold electrode can be used to conveniently and efficiently control the drug release electrochemically. Not only did our work provide a benign method to electrochemically controlled drug release via electrostatic repulsion process, it also enlighten the promising practical applications of micro electrode as a drug carrier for precisely and efficiently controlled drug release via embedding in the body.

An investigation of effects of modification processes on physical properties and mechanism of drug release for sustaining drug release from modified rice

The aim of this study was to investigate the effect of modification processes on physical properties and explain the mechanism of sustained drug release from modified rice (MR). Various types of Vietnamese rice were introduced in the study as the matrices of sustained release dosage form. Rice was thermally modified in water for a determined temperature at different times with a simple process. Then tablets containing MR and isradipine, the model drug, were prepared to investigate the capability of sustained drug release. Scanning electron microscopy (SEM) was used to determine different morphologies between MR formulations. Flow property of MR was analyzed by Hausner ratio and Carr's indices. The dissolution rate and swelling/erosion behaviors of tablets were evaluated at pH 1.2 and pH6.8 at 37±0.5°C. The matrix tablet containing MR showed a sustained release as compared to the control. The SEM analyses and swelling/erosion studies indicated that the morphology as well as swelling/erosion rate of MR were modulated by modification time, drying method and incubation. It was found that the modification process was crucial because it could highly affect the granule morphologies and hence, leading to the change of flowability and swelling/erosion capacity for sustained release of drug.

In vitro and in vivo assessment of docetaxel formulation developed for esophageal stents

Esophageal cancer (EC) mostly affects the elderly population and is frequently diagnosed at an advanced stage. Self-expanding metal stents (SEMS) are the most popular mode of palliation, but they are associated with reocclusion caused by tumor growth. To overcome this problem, docetaxel (DTX)-loaded polyurethane formulations were prepared for stent application. The films were evaluated against the cancer cell lines, OE-19 and OE-21, and normal esophageal cell line Het-1A. The DTX and the formulations were evaluated in vitro for the cytotoxicity and in vivo in nude mice. It was found that DTX and the formulations have a weak activity against the EC cell lines and an even weaker activity against Het-1A cell line. Preliminary in vivo studies showed skin toxicity in nude mice necessitating modification of the formulation. Reevaluation in a mouse xenograft model resulted in toxicity at high dose formulations while the low dose formulation exhibited modest advantage over commercial IV formulation; however, there was no significant difference between the commercial IV and blank formulation. DTX combination with an anti-cancer agent having complementary mode of action and non-overlapping toxicity could yield better outcome in future.