The determination and characterisation of 2-naphthyloxycarbonyl chloride derivatised biogenic amines in pet foods

The need to monitor biogenic amines levels is essential for many areas of the food industry for two main reasons: the caustic nature and potential toxicity of these amines, and the potential to use amine levels as markers for freshness and quality in foodstuffs. Optimised analysis conditions used for the determination of biogenic amines derivatised with 2-napthyloxycarbonyl chloride has been applied to different pet food samples to assess the effectiveness of this method for complex sample matrices. Further to this, the use of high-resolution mass spectrometry has enabled the previously unconfirmed derivatised form of seven biogenic amines to be established. The derivatised forms identified include as mono substituted (tryptamine and histamine), bisubstituted (putrescine, cadaverine and tyramine), trisubstituted (spermidine) and tetrasubstituted (spermine). The methodology of biogenic amine determination was performed successfully to a range of pet food products highlighting the applicability to a variety of complex sample matrices.

Evaluation of biogenic amines in the faeces of children with and without autism by LC-MS/MS

Previous researchers have postulated that gastrointestinal bacteria may contribute to the development and maintenance of Autism Spectrum Disorders (ASD). There is evidence based on quantitative evaluation of the gastrointestinal bacterial population in ASD that this is unlikely and an alternate mechanism will be examined where the bacteria may contribute to the development of ASD via their metabolic products and the role of biogenic amines (BAs) will be investigated. In humans, BAs influence a number of physiological processes via their actions as neurotransmitters, local hormones and gastric acid secretion. Various amines have been implicated in several medical conditions such as schizophrenia and colon cancer. To date, the relationship between BAs and autism has not been explored. This study has been designed to identify differences (and/or similarities) in the level of Bas in faecal samples of autistic children (without gastrointestinal dysfunction: n = 14; with gastrointestinal dysfunction; n = 21) and their neurotypical siblings (n = 35) by LC-MS/MS. Regardless of the diagnosis, severity of ASD and gastrointestinal dysfunction there were no significant differences found between the groups. The findings suggest that BAs in the gastrointestinal tract do not play a role in the pathophysiology of gastrointestinal dysfunction associated with ASD.

Ring strain in boroxine rings: computational and experimental considerations

B3LYP/6-311+G(d) calculations indicate that (HBO)₃ (4) and (HBO)₄ (5) possess (zero-point energy corrected) strain enthalpies of 11.4 and 31.6 kJ mol⁻¹, respectively. The absence of eight-membered (RBO)₄ rings is attributed to a combination of ring strain and the lability of the B---O bond. The synthesis, characterization and molecular structure of (PhBO)₃·pyridine (1) are described and chemical phenomena related to the addition of amines to triorganoboroxine rings are rationalized in terms of relief of ring strain in 4.

Determination of synephrine in weight-loss products using high performance liquid chromatography with acidic potassium permanganate chemiluminescence detection

Adrenergic amines found in extracts of Citrus aurantium (bitter orange) evoke analytically useful chemiluminescence with acidic potassium permanganate in the presence of polyphosphates. From corrected chemiluminescence spectra, the wavelength of maximum intensity for these reactions was 680 ± 5 nm and, using flow injection analysis methodology, limits of detection for synephrine, octopamine, tyramine and hordenine were found to be between 1 × 10⁻⁹ and 1 × 10⁻⁸ M. We have applied this method of detection to the rapid determination of synephrine in dietary supplements using monolithic column chromatography.

A hybrid FIA/HPLC system incorporating monolithic column chromatography

We have combined the generation of solvent gradients using milliGAT pumps, chromatographic separations with monolithic columns and chemiluminescence detection in an instrument manifold that approaches the automation and separation efficiency of HPLC, whilst maintaining the positive attributes of flow injection analysis (FIA), such as manifold versatility, speed of analysis and portability. As preliminary demonstrations of this hybrid FIA/HPLC system, we have determined six opiate alkaloids (morphine, pseudomorphine, codeine, oripavine, ethylmorphine and thebaine) and four biogenic amines (vanilmandelic acid, serotonin, 5-hydroxyindole-3-acetic acid and homovanillic acid) in human urine, using tris(2,2′-bipyridyl)ruthenium(III) and acidic potassium permanganate chemiluminescence detection.

Investigations into the analytical applications and fundamental chemistry of the chemiluminescent reactions of Tris(2,2'-bipyridyl)ruthenium(III) with certain Papaver Somniferum alkaloids and other related compounds

The reaction of tris(2,2’-bipyridyl)ruthenium(III) (Ru(bipy) ₃³⁺) with various analytes to generate chemiluminescence has been well documented. This investigation sought to undertake a chemiluminometic study of the reactions of Ru(bipy) ₃³⁺ with selected Papaver Somniferum alkaloids and specifically synthesised phenethylamines. The investigation, based on a kinetic study, primarily addressed the effect of varying reaction conditions (pH) on Ru(bipy) ₃³⁺ chemiluminescence production. To monitor these reactions, a batch chemiluminometer was specifically designed, fabricated and automated to conduct an extensive study on the selected compounds of interest. The instrumentation incorporated a custom built reaction cell and comprised an ‘on-line’ sample preparation system with which calibration standards could be automatically prepared. The instrumentation provided both time-independent (peak area) and time-dependent (kinetic profile) information. A novel approach to the stabilisation of Ru(bipy) ₃³⁺ as a chemiluminescencent reagent was also investigated and a recirculating system was employed with the batch chemiluminometer to provide a stable supply of Ru(bipy) ₃³⁺. Codeine, thebaine and 6-methoxy-codeine were the Papaver Somniferum alkaloids selected for this study and several N-methylated and N,N-dimethylated phenethylamines and methoxy-substituted phenetheylamines were also synthesised to investigate the affect of pH on the chemiluminescence emission efficiency. The versatility of the batch chemiluminometer facilitated the kinetic study of numerous analytes over a broad pH range. The exemplary performance of the chemiluminometer as an analytical instrument, was demonstrated by the calibration functions, based on peak area data, which exhibited excellent linearity and sensitivity. The estimated detection limits (3s) for the selected alkaloids were in the range 2 x 10^-9 M to 7 x 10^-9 at pH 5.0 and above, which compared favourably to detection limits for the same compounds determined using FIA. Relative standard deviations (n=5) for peak areas ranged between 1% to 5% with a mean of 3.1% for all calibration standards above 2.5 x 10^-8 M. Correlation between concentration and peak area, irrespective of pH and analyte was excellent, with all but two calibration functions having r-squared values greater than 0.990. The analytical figures of merit exemplified the precision and robustness of the reagent delivery and ‘on-line’ sample preparation, as well as the sensitivity of the system. The employment of the chemiluminometer for the measurement of total chemiluminescence emission (peak area) was in itself a feasible analytical technique, which generated highly reproducible and consistent data. Excellent analytical figures of merit, based on peak area, were similarly achieved for the phenethylamines. The effects of analyte structure on chemiluminescence activity was also investigated for the alkaloids and the phenethylamines. Subtle structural variations between the three alkaloids resulted in either a moderately reduced or enhanced total emission that was two or three fold difference only. A significant difference in reaction kinetics was observed between thebaine and codeine/6-methoxy-codeine, which was dependent upon pH. The time-dependent data, namely the observed rate constants for the initial rise in intensity and for the subsequent decay rate, were obtained by fitting a mathematical function (based on the postulated reaction mechanism) to the raw data. The determination of these rate constants for chemiluminescence reactions highlighted the feasibility for utilising such measurements for quantitative analytical applications. The kinetic data were used to discriminate between analyte responses in order to determine the concentrations of individual analytes in a binary mixture. A preliminary, multi-component investigation performed on a binary mixture of codeine and 6-methoxy-codeine (1:1) successfully determined the concentrations of these individual components using such rate constant measurements. Consequently, variations in kinetics resulted in a significant difference between the relative chemiluminescence response based on peak area measurements and the relative response base on peak height measurements obtained using FIA. With regards to the observed reactivity of secondary amines and tertiary amines, chemiluminescence peak area determinations confirmed the vital role of pH on reaction efficiency, which was governed by structural features and kinetics. The tertiary amines investigated generally produced a greater emission under acidic conditions than the corresponding secondary amines. However, the measured chemiluminescence responses were highly dependent upon pH, with similar peak areas obtained for both amine groups under slightly alkaline conditions.

Aspects of milk protein catabolism by lactobacilli

Lactobacillus plantarum and subspecies of Lactobacillus casei were isolated from good quality mature Cheddar cheese and characterized with respect to metabolic functions that would allow their use in cheesemaking. In this way microbiological control of the maturation process with particular emphasis on protein catabolism was achieved. The lactobacilli isolated were selected for low growth rates (and acid production) in milk, and low proteinase activity to allow for their addition in high numbers to cheesemilk together with the normal starter flora (group N streptococci). The growth and acid production of the starter bacteria were unaffected by the presence of the lactobacilli during cheese manufacture and it was found that the added lactobacilli were able to grow and function under the conditions prevalent in Cheddar cheese during maturation. It was also demonstrated that the lactobacilli could be grown in an artificial medium to high numbers under controlled conditions and could be harvested for the preparation of cell concentrates, a necessary characteristic for commercialization. The lactobacilli also metabolized citrate, a potential problem in cheese maturation associated with C02 production but this did not adversely affect the maturation process under the conditions used. Compared to the group N streptococci the non-starter lactobacilli possessed a proteinase system that had a higher temperature optimum and was less affected by heat and sodium chloride. They also possessed a more active peptidase system although both the lactobacilli and the starter organisms possessed a similar range of peptidases. Non-starter lactobacilli were added to normal cheese and cheese made with proteinase negative starter. The added organisms did not adversely affect manufacturing parameters and did not metabolize citrate or lead to the formation of biogenic amines. However protein catabolism rates, particularly with respect to peptide degradation, were increased, as was flavour development and intensity. It was observed that the body and texture of the cheeses was unaffected by the treatment. By controlling both the starter and non-starter microflora in the cheeses a practical system for favourably influencing cheese maturation was possible. The investigation has demonstrated that carefully selected and characterized non-starter lactobacilli can be incorporated into Cheddar cheese manufacture in order to influence flavour development during maturation. Moreover the organisms can be added to the vat stage of manufacture without causing problems to the manufacturing process. This approach is a simple cost effective means of improving the cost of Cheddar cheese production and provides an unique opportunity to improve and control quality of all Cheddar cheese produced.

Enhancing tris(2,2'-bipyridI)ruthenium(II) chemiluminescence

In this thesis, chemiluminescence, that is light from a chemical reaction, was applied to the determination of pharmaceuticals, amines, and organic acids. The detection of organic acids was improved substantially through the manipulation of the speed of reaction and the use of silver nanoparticles in both solution and solid states.

Combined continuous wave and pulsed plasma modes : For more stable interfaces with higher functionality on metal and semiconductor surfaces

A novel approach to producing improved bio-interfaces by combining continuous wave (CW) and pulsed plasma polymerization (PP) modes is reported. This approach has enabled the generation of stable interfaces with a higher density of primary amine functionality on metal, ceramic and semiconductor surfaces. Heptylamine (HA) was used as the amine-precursor. In this new design, a thin CW PPHA layer is introduced to provide strong cross-linking and attachment to the metal or semiconductor surfaces and to provide a good foundation for better bonding a pulsed PPHA layer with high retention of functional groups. The combined mode provides the pulsed mode advantage of a 3-fold higher density of primary amines, while retaining much of the markedly higher stability in aqueous solutions of the continuous mode.

Concentration monitoring and performance of a migratory corrosion inhibitor in steel-reinforced concrete

Inhibitor concentration depth profiles for concrete samples treated with a proprietary migratory corrosion inhibitor (of the Cortec MCI range) are presented. The treated concrete was cored and these cores were then sectioned and crushed before being immersed in distilled water to extract the available inhibitor. The amine concentrations were quantified using an ammonium-sensing electrode and were then related to the inhibitor concentration present. The inhibitor examined, reported to contain a combination of volatile amines and amino carboxylate compounds, was found to readily diffuse through concrete. The inhibitor was subjected to a 5-year trial and found to be effective in suppressing corrosion of steel reinforcement in the presence of high chloride concentrations. The concentration profiles indicate that only relatively low concentrations of inhibitor were required to achieve inhibition in this case.

Microwave-assisted direct amination : rapid access to multi-functionalized N6-substituted adenosines

Analogues of adenosine have a range of interesting biological activities and potential therapeutic applications. A method for the efficient preparation of highly functionalized N6-substituted adenosines has been developed from the corresponding tert-butyldimethylsilyl-protected inosine. The key step in this procedure is a microwave-assisted amination reaction between an appropriately substituted inosine and an amine in the presence of PyBroP. High yields of desired N6-substituted adenosines were achieved with hindered amines and the reaction was also found to accommodate a range of substituents on the inosine precursor.

Association between the COMT Val158Met polymorphism and propensity to anxiety in an Australian population-based longitudinal study of adolescent health

Objectives: Catechol-O-methyltransferase plays a central role in the metabolism of biogenic amines such as norepinephrine, dopamine and serotonin. Functional studies have demonstrated a dose relationship between Val158Met genotypes and catechol-O-methyltransferase activity. Compared with the Val158Val genotype, the Val158Met and Met158Met genotypes result in two- and four-fold reductions in catechol-O-methyltransferase activity, respectively. Two recent reports have observed the association between the Met158Met genotype and risk of anxiety in adult populations. We examined the association between the Val158Met genotypes and propensity to anxiety across adolescence.

Methods: Participants were drawn from an eight-wave study of the mental and behavioural health of over 2000 young Australians followed from 14 to 24 years of age (Victorian Adolescent Health Cohort Study, 1992 to present). DNA was received from 962 participants using a cheek swab collection method.

Results: The odds of reporting persistent episodic anxiety (phobic avoidance, panic attacks) were doubled among carriers of the Met158Met genotype (odds ratio 2.0, 95% confidence interval 1.1-3.4, P=0.014). A dose relationship between additional copies of the Met158 allele and persistent episodic anxiety was also observed (1.5, 1.1-1.94, P=0.007). Stratification by sex showed that the risk effect of the Met158 allele was among females only. No association was observed for measures of neuroticism, persistent generalized anxiety, or a composite measure of psychiatric distress.

Conclusion: These data replicate previous findings suggesting association between the Val158Met polymorphism and specific expressions of anxiety among females.

Practical amine functionalization of multi-walled carbon nanotubes for effective interfacial bonding

 Improved methods of functionalizing the surfaces of multi-walled carbon nanotubes (MWCNTs) have been investigated. It is shown that a level of primary amines of 2.3%, higher than previously reported for any nitrogen-containing gas plasma treatment, can be achieved using a mixture of N2 and H2, which is preferable to using NH3. Even higher levels (3.5%) of primary amines can be achieved by coating the MWCNTs with a thin layer of plasma polymerized heptylamine. In both cases, the highest levels were achieved using a combined continuous plus pulsed plasma mode which was superior to either continuous wave or pulsed wave alone. The integrity of the MWCNT structure is maintained by the plasma treatments, and the functionalized surface improves the dispersion of the MWCNTs and their interfacial bonding with epoxy, giving superior nanoindentation performance of the composites.