Measuring the influence of fibre-to-fabric properties on the pilling of wool fabrics

This study ranks the contribution of various fibre, yarn and fabric attributes to the pilling of wool knitwear. On the basis of an artificial neural network modelling, a combination of sensitivity analysis, forwards/backwards search and genetic algorithms was used to identify the importance of various fibre/yarn/fabric input parameters. The three different techniques show broad similarities in their assessment of which input parameters are important or are not important in affecting fabric pilling. The ranking shows that fabric cover factor has the most effect on pilling, followed by yarn count and thin places, fibre length, yarn twist, etc. It is further illustrated that the directional trend of the predicted pilling outputs for a selection of inputs was in line with the expected behaviour. To verify the findings of input feature selection, input factors deemed to have a small effect on the predicted pilling output, such as fibre length and diameter variations and curvature, were removed and the subsequent performance statistically compared to the original multi-layer perceptron. Differences between the outputs predicted by the original and pruned models are found not to be statistically significant at the 5% significance level. Results from this study may help manufacturers and knitwear designers in choosing the most appropriate materials and structures to reduce the pilling propensity of wool knitwear.

Optimization of MLP parameters on mineral potential mapping tasks

Mineral potential mapping is the process of combining a set of input maps, each representing a distinct geo-scientific variable, to produce a single map which ranks areas according to their potential to host deposits of a particular type. The maps are combined using a mapping function which must be either provided by an expert (knowledge-driven approach), or induced from sample data (data-driven approach). Current data-driven approaches using multilayer perceptrons (MLPs) to represent the mapping function have several inherent problems: they rely heavily on subjective judgment in selecting training data and are highly sensitive to this selection; they do not utilize the contextual information provided by unlabeled data; and, there is no objective interpretation of the values output by the MLP. This paper presents a novel approach which overcomes these three problems.

Comparison of MLP and Bayesian approaches on mineral prospectivity mapping tasks

Mineral Prospectivity Mapping is the process of combining maps containing different geoscientific data sets to produce a single map depicting areas ranked according to their potential to host mineral deposits of a particular type. This paper outlines two approaches for deriving a function which can be used to assign to each cell in the study area a value representing the posterior probability that the cell contains a deposit of the sought-after mineral. One approach is based on estimating probability density functions (pdfs); the second uses multilayer perceptrons (MLPs). Results are provided from applying these approaches to geoscientific datasets covering a region in North Western Victoria, Australia. The results demonstrate that while both the Bayesian approach and the MLP approach yield similar results when the number of input dimensions is small, the Bayesian approach rapidly becomes unstable as the number of input dimensions increases, with the resulting maps displaying high sensitivity to the number of mixtures used to model the distributions. However, despite the fact that Bayesian assigned values cannot be interpreted as posterior probabilities in high dimensional input spaces, the pixel favorability rankings produced by the two methods is similar.

Detection and classification of road signs in natural environments

An automatic road sign recognition system first locates road signs within images captured by an imaging sensor on-board of a vehicle, and then identifies the detected road signs. This paper presents an automatic neural-network-based road sign recognition system. First, a study of the existing road sign recognition research is presented. In this study, the issues associated with automatic road sign recognition are described, the existing methods developed to tackle the road sign recognition problem are reviewed, and a comparison of the features of these methods is given. Second, the developed road sign recognition system is described. The system is capable of analysing live colour road scene images, detecting multiple road signs within each image, and classifying the type of road signs detected. The system consists of two modules: detection and classification. The detection module segments the input image in the hue-saturation-intensity colour space, and then detects road signs using a Multi-layer Perceptron neural-network. The classification module determines the type of detected road signs using a series of one to one architectural Multi-layer Perceptron neural networks. Two sets of classifiers are trained using the Resillient-Backpropagation and Scaled-Conjugate-Gradient algorithms. The two modules of the system are evaluated individually first. Then the system is tested as a whole. The experimental results demonstrate that the system is capable of achieving an average recognition hit-rate of 95.96% using the scaled-conjugate-gradient trained classifiers.

Visual tracking of vehicles using multiresolution analysis and neural network

This paper describes the procedure for detection and tracking of a vehicle from an on-road image sequence taken by a monocular video capturing device in real time. The main objective of such a visual tracking system is to closely follow objects in each frame of a video stream, such that the object position as well as other geometric information are always known. In the tracking system described, the video capturing device is also moving. It is a challenge to detect and track a moving vehicle under a constantly changing environment coupled to real time video processing. The system suggested is robust to implement under different illuminating conditions by using the monocular video capturing device. The vehicle tracking algorithm is one of the most important modules in an autonomous vehicle system, not only it should be very accurate but also must have the safety of other vehicles, pedestrians, and the moving vehicle itself. In order to achieve this an algorithm of multi resolution technique based on Haar basis functions were used for the wavelet transform, where a combination of classification was carried out with the multilayer feed forward neural network. The classification is done in a reduced dimensional space, where principle component analysis (PCA) dimensional reduction technique has been applied to make the classification process much more efficient. The results show the effectiveness of the proposed methodology.

Influence of deformation-induced heating on the bond strength of rolled metal multilayers

The bond strength of various metal multilayers produced by cold rolling of metal foils with different thermal conductivity was investigated. Results indicated that the metallic multilayer system with low thermal conductivity exhibited relative high bond strength while high thermal conductivity metal system may fail to be roll-bonded together. The relationship between the deformation-induced localized heating and the bond strength were discussed.

Detection of vehicles with monolithic classifier vis-à-vis a boosted cascaded classifier

This paper describes the comparison of accuracy and performance of two machine learning approaches for visual object detection and tracking vehicles, from an on-road image sequence. The first is a neural network based approach. Where an algorithm of multi resolution technique based on Haar basis functions was used to obtain an image with different scales. Thereafter a classification was carried out with the multilayer feed forward neural network. Principle Component Analysis (PCA) technique was used as a dimension reduction technique to make the classification process much more efficient. The second approach is based on boosting which also yields very good detection rates. In general, boosting is one of the most important developments in classification methodology. It works by sequentially applying a classification algorithm to reweighed versions of the training data, followed by taking a weighted majority vote of the sequence of classifiers thus produced. For this work, a strong classifier was trained by the adaboost algorithm. The results of comparing the two methodologies visà-vis shows the effectiveness of the methods that have been used.

Performance of an objective fabric pilling evaluation method

In previous work, we established the principle of objective fabric pilling evaluation based on two-dimensional dual-tree complex wavelet transform (2DDTCWT) image reconstruction and non-linear classification using a neural network. This proof-of-principle work was performed using standard pilling test images. Here, we demonstrate the practical operation of the objective pilling evaluation method using a large set of real fabric pilling samples. We show that piling classification results from a trained multiple-layer perceptron neural network achieve a regression correlation of approximately 96% with the corresponding human expert pilling ratings.

The effect of potential bias on the formation of ionic liquid generated surface films on Mg alloys

An electrochemical approach to the formation of a protective surface film on Mg alloys immersed in the ionic liquid (IL), trihexyl(tetradecyl)phosphonium–bis 2,4,4-trimethylpentylphosphinate, was investigated in this work. Initially, cyclic voltammetry was used with the Mg alloy being cycled from OCP to more anodic potentials. EIS data indicate that, under these circumstances, an optimum level of protection was achieved at intermediate potentials (e.g., 0 or 0.25 V versus Ag/AgCl). In the second part of this paper, a small constant bias was applied to the Mg alloy immersed in the IL for extended periods using a novel cell design. This electrochemical cell allowed us to monitor in situ surface film formation on the metal surface as well as the subsequent corrosion behaviour of the metal in a corrosive medium. This apparatus was used to investigate the evolution of the surface film on an AZ31 magnesium alloy under a potential bias (between ±100 mV versus open circuit) applied for over 24 h, and the film evolution was monitored using electrochemical impedance spectroscopy (EIS). A film resistance was determined from the EIS data and it was shown that this increased substantially during the first few hours (independent of the bias potential used) with a subsequent decrease upon longer exposure of the surface to the IL. Preliminary characterization of the film formed on the Mg alloy surface using ToF-SIMS indicates that a multilayer surface exists with a phosphorous rich outer layer and a native oxide/hydroxide film underlying this. The corrosion performance of a treated AZ31 specimen when exposed to 0.1 M NaCl aqueous solution showed considerable improvement, consistent with electrochemical data.

A neural network based human identification framework using ear images

This paper presents a framework that uses ear images for human identification. The framework makes use of Principal Component Analysis (PCA) for ear image feature extraction and Multilayer Feed Forward Neural Network for classification. Framework are proposed to improve recognition accuracy of human identification. The framework was tested on an ear image database to evaluate its reliability and recognition accuracy. The experimental results showed that our framework achieved higher stable recognition accuracy and over-performed other existing methods. The recognition accuracy stability and computation time with respect to different image sizes and factors were investigated thoroughly as well in the experiments.

Neural net device for IED gas identification

Most of the embedded systems that detect gases today are for specific types and indicate the levels of the gas present with their standard sensors. We introduce here an adaptable system that can detect and distinguish the type of gas in a volatile environment such as searching for Improvised Explosive Devices (IEDs). This is achieved with a small device mounted on a mobile robot through the use of an algorithm that is an Artificial Neural Network (ANN). The input layer to the ANN is an array of environmental and gas sensors. The small device, comprising of a multilayer circuit board with sensors in a rugged lightweight case, mounts on the mobile robot and communicates the gaseous data to the robot.

The ANN is implemented in the hardware of a FPGA with the control of the ANN being achieved through the configurable processor and memory. Calibration and testing of the device involves the training of device and the ANN with specific target gases. The Accuracy of the device is validated through lab testing against high-end gas test instruments with known concentrations of gases.

Production and applications of multi-layer 3D fabrics

In this paper, 3D textile structures, their types and applications have been discussed. Woven structures especially multi-layer woven structures are discussed in detail. A simple and quick method to produce 3D textile woven preforms on conventional looms is also given at the end of this paper. 3D textile fabrics give composite structures weight reduction with improved mechanical properties in comparison to traditionally used materials.

Photoreactive azido-containing silica nanoparticle/polycation multilayers : durable superhydrophobic coating on cotton fabrics

In this study, we report the functionalization of silica nanoparticles with highly photoreactive phenyl azido groups and their utility as a negatively charged building block for layer-by-layer (LbL) electrostatic assembly to produce a stable silica nanoparticle coating. Azido-terminated silica nanoparticles were prepared by the functionalization of bare silica nanoparticles with 3-aminopropyltrimethoxysilane followed by the reaction with 4-azidobenzoic acid. The azido functionalization was confirmed by FTIR and XPS. Poly(allylamine hydrochloride) was also grafted with phenyl azido groups and used as photoreactive polycations for LbL assembly. For the photoreactive silica nanoparticle/polycation multilayers, UV irradiation can induce the covalent cross-linking within the multilayers as well as the anchoring of the multilayer film onto the organic substrate, through azido photochemical reactions including C–H insertion/abstraction reactions with surrounding molecules and dimerization of azido groups. Our results show that the stability of the silica nanoparticle/polycation multilayer film was greatly improved after UV irradiation. Combined with a fluoroalkylsilane post-treatment, the photoreactive LbL multilayers were used as a coating for superhydrophobic modification of cotton fabrics. Herein the LbL assembly method enables us to tailor the number of the coated silica nanoparticles through the assembly cycles. The superhydrophobicity of cotton fabrics was durable against acids, bases, and organic solvents, as well as repeated machine wash. Because of the unique azido photochemistry, the approach used here to anchor silica nanoparticles is applicable to almost any organic substrate.

Wireless instantaneous neurotransmitter concentration system-based amperometric detection of dopamine, adenosine, and glutamate for intraoperative neurochemical monitoring - laboratory investigation

Object  In a companion study, the authors describe the development of a new instrument named the Wireless Instantaneous Neurotransmitter Concentration System (WINCS), which couples digital telemetry with fast-scan cyclic voltammetry (FSCV) to measure extracellular concentrations of dopamine. In the present study, the authors describe the extended capability of the WINCS to use fixed potential amperometry (FPA) to measure extracellular concentrations of dopamine, as well as glutamate and adenosine. Compared with other electrochemical techniques such as FSCV or high-speed chronoamperometry, FPA offers superior temporal resolution and, in combination with enzyme-linked biosensors, the potential to monitor nonelectroactive analytes in real time.

Methods  The WINCS design incorporated a transimpedance amplifier with associated analog circuitry for FPA; a microprocessor; a Bluetooth transceiver; and a single, battery-powered, multilayer, printed circuit board. The WINCS was tested with 3 distinct recording electrodes: 1) a carbon-fiber microelectrode (CFM) to measure dopamine; 2) a glutamate oxidase enzyme–linked electrode to measure glutamate; and 3) a multiple enzyme–linked electrode (adenosine deaminase, nucleoside phosphorylase, and xanthine oxidase) to measure adenosine. Proof-of-principle analyses included noise assessments and in vitro and in vivo measurements that were compared with similar analyses by using a commercial hardwired electrochemical system (EA161 Picostat, eDAQ; Pty Ltd). In urethane-anesthetized rats, dopamine release was monitored in the striatum following deep brain stimulation (DBS) of ascending dopaminergic fibers in the medial forebrain bundle (MFB). In separate rat experiments, DBS-evoked adenosine release was monitored in the ventrolateral thalamus. To test the WINCS in an operating room setting resembling human neurosurgery, cortical glutamate release in response to motor cortex stimulation (MCS) was monitored using a large-mammal animal model, the pig.

Results   The WINCS, which is designed in compliance with FDA-recognized consensus standards for medical electrical device safety, successfully measured dopamine, glutamate, and adenosine, both in vitro and in vivo. The WINCS detected striatal dopamine release at the implanted CFM during DBS of the MFB. The DBS-evoked adenosine release in the rat thalamus and MCS-evoked glutamate release in the pig cortex were also successfully measured. Overall, in vitro and in vivo testing demonstrated signals comparable to a commercial hardwired electrochemical system for FPA.

Conclusions  By incorporating FPA, the chemical repertoire of WINCS-measurable neurotransmitters is expanded to include glutamate and other nonelectroactive species for which the evolving field of enzyme-linked biosensors exists. Because many neurotransmitters are not electrochemically active, FPA in combination with enzyme-linked microelectrodes represents a powerful intraoperative tool for rapid and selective neurochemical sampling in important anatomical targets during functional neurosurgery.