Shape memory alloy scaffolds for bone tissue engineering

Titanium alloy scaffolds for bone tissue engineering are receiving increasing attention because their porous structure and mechanical properties can be adjusted to match those of bone. In particular, there is an enormous potential to increase the life of such implant material if the porous structure can be imparted with shape memory properties. In the present study, TiNi scaffolds with a porous structure and high porosities up to 75% were fabricated by powder metallurgy. The porous structure was characterized by scanning electron microscope. The mechanical properties, the shape memory and superelastic effects were investigated by differential scanning calorimetry, nanoindentation and compressive tests. Results indicate that the porous TiNi scaffolds display an open-cell porous structure which provides new bone tissue ingrowth ability. The mechanical properties of the TiNi scaffolds can be tailored to match those of natural bone. Furthermore, the TiNi scaffolds show good shape memory and superelastic effects.

Titanium–nickel shape memory alloy foams for bone tissue engineering

Titanium–nickel (TiNi) shape memory alloy (SMA) foams with an open-cell porous structure were fabricated by space-holder sintering process and characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The mechanical properties and shape memory properties of the TiNi foam samples were investigated using compressive test. Results indicate that the plateau stresses and elastic moduli of the foams under compression decrease with the increase of their porosities. The plateau stresses and elastic moduli are measured to be from 1.9 to 38.3 MPa and from 30 to 860 MPa for the TiNi foam samples with porosities ranged from 71% to 87%, respectively. The mechanical properties of the TiNi alloy foams can be tailored to match those of bone. The TiNi alloy foams exhibit shape memory effect (SME), and it is found that the recoverable strain due to SME decreases with the increase of foam porosity.

Tissue distribution of lignans in rats in response to diet, dose−response, and competition with isoflavones

This paper investigates the occurrence and distribution of the lignan metabolites enterodiol (END) and enterolactone (ENL) and the isoflavone daidzein (DAID) in rat tissues by use of liquid chromatography−electrospray ionization mass spectrometry (LC−ESI/MSn) following a variety of dietary regimes. Furthermore, we examined the dose−response and distribution of END and ENL in liver, testes, prostate, and lung, and we investigated the effects of competition between lignans and isoflavones on metabolite distribution. In liver, testes, prostate, and lung tissue, dose-related increases in END concentration were observed. In the testes, coadministration of 60 mg/kg secoisolariciresinol diglycoside (SDG) with 60 mg/kg isoflavones produced alterations in the resulting metabolite profile, causing increased END concentration and decreased DAID concentration. Results indicate lignan accumulation in tissues occurs, and coadministration of lignans with isoflavones affects the metabolite profile, with effects dependent on tissue type.

Short-term docosapentaenoic acid (22:5n-3) supplemtation increases tissue docosapentaenoic acid, DHA and EPA concentrations in rats

The metabolic fate of dietary n-3 docosapentaenoic acid (DPA) in mammals is currently unknown. The aim of the present study was to determine the extent of conversion of dietary DPA to DHA and EPA in rats. Four groups of male weanling Sprague–Dawley rats (aged 5 weeks) were given 50 mg of DPA, EPA, DHA or oleic acid, daily for 7 d by gavage. At the end of the treatment period, the tissues were analysed for concentrations of long-chain PUFA. DPA supplementation led to significant increases in DPA concentration in all tissues, with largest increase being in adipose (5-fold) and smallest increase being in brain (1·1-fold). DPA supplementation significantly increased the concentration of DHA in liver and the concentration of EPA in liver, heart and skeletal muscle, presumably by the process of retroconversion. EPA supplementation significantly increased the concentration of EPA and DPA in liver, heart and skeletal muscle and the DHA concentration in liver. DHA supplementation elevated the DHA levels in all tissues and EPA levels in the liver. Adipose was the main tissue site for accumulation of DPA, EPA and DHA. These data suggest that dietary DPA can be converted to DHA in the liver, in a short-term study, and that in addition it is partly retroconverted to EPA in liver, adipose, heart and skeletal muscle. Future studies should examine the physiological effect of DPA in tissues such as liver and heart.

Tissue donation and the attitudes of health care professionals

Since the first corneal transplant in 1905, improved surgical techniques and the development of immunosuppressive drugs have led to excellent success rates for organ and tissue transplantation procedures. This Chapter ,"'ill focus on the cadaveric donation of tissue and the attitudes towards it of health professionals, because they are key players in the donation- transplantation process.

The chapter begins with an overview of cadaveric tissue donation, including what can currently be transplanted. It will then present what is known about health professionals' attitudes to and knowledge of tissue donation and the impact that these have on donation rates. Attitudes, their components and their effect upon behaviour are explored using theories arising from social psychology to explain how these influence actual or intended behaviours associated with the discussion of donation wishes with relatives of the potential donor. Since some tissues, such as blood and bone marrow, can only normally be donated during life, these will be excluded since the behaviours associated with blood donation differ significantly from those associated with cadaveric tissue donation.

Ti6Ta4Sn alloy and subsequent scaffolding for bone tissue engineering

Porous titanium (Ti) and titanium alloys are promising scaffold biomaterials for bone tissue engineering, because they have the potential to provide new bone tissue ingrowth abilities and low elastic modulus to match that of
natural bone. In the present study, a new highly porous Ti6Ta4Sn alloy scaffold with the addition of biocompatible alloying elements (tantalum (Ta) and tin (Sn)) was prepared using a space-holder sintering method. The
strength of the Ti6Ta4Sn scaffold with a porosity of 75% was found to be significantly higher than that of a pure Ti scaffold with the same porosity. The elastic modulus of the porous alloy can be customized to match that of
human bone by adjusting its porosity. In addition, the porous Ti6Ta4Sn alloy exhibited an interconnected porous structure, which enabled the ingrowth of new bone tissues. Cell culture results revealed that human SaOS₂
osteoblast-like cells grew and spread well on the surfaces of the solid alloy, and throughout the porous scaffold. The surface roughness of the alloy showed a significant effect on the cell behavior, and the optimum surface
roughness range for the adhesion of the SaOS2 cell on the alloy was 0.15 to 0.35 mm. The present study illustrated the feasibility of using the porous Ti6Ta4Sn alloy scaffold as an orthopedic implant material with a special
emphasis on its excellent biomechanical properties and in vitro biocompatibility with a high preference by osteoblast-like cells.

Development of a novel pulsatile bioreactor for tissue culture

The construction of tissue-engineered parts such as heart valves and arteries requires more than just the seeding of cells onto a biocompatible/biodegradable polymeric scaffold. It is essential that the functionality and mechanical integrity of the cell-seeded scaffold be investigated in vitro prior to in vivo implantation. The correct hemodynamic conditioning would lead to the development of tissues with enhanced mechanical strength and cell viability. Therefore, a bioreactor that can simulate physiological conditions would play an important role in the preparation of tissue-engineered constructs. In this article, we present and discuss the design concepts and criteria, as well as the development, of a multifunctional bioreactor for tissue culture in vitro. The system developed is compact and easily housed in an incubator to maintain sterility of the construct. Moreover, the proposed bioreactor, in addition to mimicking in vivo conditions, is highly flexible, allowing different types of constructs to be exposed to various physiological flow conditions. Initial verification of the hemodynamic parameters using Laser doppler anemometry indicated that the bioreactor performed well and produced the correct physiological conditions.

Protection behaviour : a phenomenon affecting organ and tissue donation in the 21st century?

UK statistics show that whilst waiting lists for transplantation surgery continue to increase, donor numbers are static. This paper describes the hermeneutic phase of a mixed method study and puts forward the concept of protection behaviour as one explanation for nurses’ reticence to discuss post-mortem donation wishes with patients’ relatives. The desire to protect appears to influence attitudes, confidence levels and perceived ability to become involved in donor identification and donation discussion, consequently affecting the availability of transplantable organs and tissue. By understanding more fully why protective behaviours are employed, it increases the likelihood of a solution being found.

Haptically simulating soft tissue using spherical voxel and reactive agents

This thesis describes technology developed by the author enabling trainee surgeons to perform needle insertion procedures with force feedback (haptics) on a virtual patient. Addition of the sense of touch to medical simulation is arguably the most important step forward in the evolution of haptic technology to this day.

Surface modification of biocompatible metallic materials for bone tissue engineering

Titanium, zirconium and TiZr binary alloy were fabricated using a powder metallurgical method. Appropriate surface modifying techniques were conducted on the metals to render an ability for apatite formation. Their biocompatibility has also been assessed. These materials showed potential for biomedical applications because of their excellent bioactivity and biocompatibility which may improve bonding of the implants to juxtaposed bone.

Sulfur and heavy metals in biological tissue

The correlation between sulfur, metallothionein and heavy metals was investigated in biological samples from the aquatic environment. Samples of orange roughie, shark, goldfish and king crab were analysed for metals and sulfur. Results indicated that there was insufficient evidence to suggest any relationship between sulfur and total metals, but there was sufficient evidence to suggest a significant relationship existed between mercury and total sulfur in the biological tissues examined.