Ranking of pre-treatment technologies for reverse osmosis for water recovery

Agro-industries are a life-line for sustainable future of human kind. However, the wastewater generated by agro-industries poses direct threat to the same sustainable future by polluting the freshwater sources when discharged into those freshwater sources. Thus, we need both advanced treatment technologies to treat those wastewater streams generated and better reuse practices for the treated effluents. Reverse osmosis (RO) is one of the advanced treatments to treat dissolved solids that are present in agricultural wastewater streams. But, RO is very sensitive to suspended solids (SS) present in the wastewater streams. Those SS can foul the RO membrane and make it ineffective in producing treated effluent at desired rates. Therefore, suitable pre-treatment scheme is necessary to treat the agro-wastewater streams before passing through RO. This study focuses on the qualitative and quantitative ranking of the available conventional and modern pre-treatment technologies as pre-treatment for RO. This study considers wastewater that has been treated through a secondary treatment system for example activated sludge process as the target water that needs pre-treatment. Based on qualitative ranking of conventional pre-treatment options, the Lime clarification/Granular Media filtration (GMF) option is ranked as the best; whereas finescreens/ micro-screens option ranked as the least preferred option based on the scores they attained in treating the water quality parameters that are considered essential. Based on the quantitative ranking, the low pressure membrane technology such as ultra-filtration (UF) stood first and microfiltration (MF) stood last.

Probabilistic models over ordered partitions with applications in document ranking and collaborative filtering

Ranking is an important task for handling a large amount of content. Ideally, training data for supervised ranking would include a complete rank of documents (or other objects such as images or videos) for a particular query. However, this is only possible for small sets of documents. In practice, one often resorts to document rating, in that a subset of documents is assigned with a small number indicating the degree of relevance. This poses a general problem of modelling and learning rank data with ties. In this paper, we propose a probabilistic generative model, that models the process as permutations over partitions. This results in super-exponential combinatorial state space with unknown numbers of partitions and unknown ordering among them. We approach the problem from the discrete choice theory, where subsets are chosen in a stagewise manner, reducing the state space per each stage significantly. Further, we show that with suitable parameterisation, we can still learn the models in linear time. We evaluate the proposed models on two application areas: (i) document ranking with the data from the recently held Yahoo! challenge, and (ii) collaborative filtering with movie data. The results demonstrate that the models are competitive against well-known rivals.

A new re-ranking method using enhanced pseudo-relevance feedback for content-based medical image retrieval

We propose a novel re-ranking method for content-based medical image retrieval based on the idea of pseudo-relevance feedback (PRF). Since the highest ranked images in original retrieval results are not always relevant, a naive PRF based re-ranking approach is not capable of producing a satisfactory result. We employ a two-step approach to address this issue. In step 1, a Pearson's correlation coefficient based similarity update method is used to re-rank the high ranked images. In step 2, after estimating a relevance probability for each of the highest ranked images, a fuzzy SVM ensemble based approach is adopted to re-rank the images. The experiments demonstrate that the proposed method outperforms two other re-ranking methods.

Role assessment of GIS analysis and its reliability while ranking urban sustainability using scenarios specific to regional climate, community and culture

Urban Sustainability expresses the level of conservation of a city while living a town or consuming its urban resources, but the measurement of urban sustainability depends on what are considered important indicators of conservation besides the permitted levels of consumption in accordance with adopted criteria. This criterion should have common factors that are shared for all the members tested or cities to be evaluated as in this particular case for Abu Dhabi, but also have specific factors that are related to the geographic place, community and culture, that is the measures of urban sustainability specific to a middle east climate, community and culture where GIS Vector and Raster analysis have a role or add a value in urban sustainability measurements or grading are considered herein. Scenarios were tested using various GIS data types to replicate urban history (ten years period), current status and expected future of Abu Dhabi City setting factors to climate, community needs and culture. The useful Vector or Raster GIS data sets that are related to every scenario where selected and analysed in the sense of how and how much it can benefit the urban sustainability ranking in quantity and quality tests, this besides assessing the suitable data nature, type and format, the important topology rules to be considered, the useful attributes to be added, the relationships which should be maintained between data types of a geo- database, and specify its usage in a specific scenario test, then setting weights to each and every data type representing some elements of a phenomenon related to urban suitability factor. The results of assessing the role of GIS analysis provided data collection specifications such as the measures of accuracy reliable to a certain type of GIS functional analysis used in an urban sustainability ranking scenario tests. This paper reflects the prior results of the research that is conducted to test the multidiscipline evaluation of urban sustainability using different indicator metrics, that implement vector GIS Analysis and Raster GIS analysis as basic tools to assist the evaluation and increase of its reliability besides assessing and decomposing it, after which a hypothetical implementation of the chosen evaluation model represented by various scenarios was implemented on the planned urban sustainability factors for a certain period of time to appraise the expected future grade of urban sustainability and come out with advises associated with scenarios for assuring gap filling and relative high urban future sustainability. The results this paper is reflecting are concentrating on the elements of vector and raster GIS analysis that assists the proper urban sustainability grading within the chosen model, the reliability of spatial data collected; analysis selected and resulted spatial information. Starting from selecting some important indicators to comprise the model which include regional culture, climate and community needs an example of what was used is Energy Demand & Consumption (Cooling systems). Thus, this factor is related to the climate and it‟s regional specific as the temperature varies around 30-45 degrees centigrade in city areas, GIS 3D Polygons of building data used to analyse the volume of buildings, attributes „building heights‟, estimate the number of floors from the equation, following energy demand was calculated and consumption for the unit volume, and compared it in scenario with possible sustainable energy supply or using different environmental friendly cooling systems this is followed by calculating the cooling system effects on an area unit selected to be 1 sq. km, combined with the level of greenery area, and open space, as represented by parks polygons, trees polygons, empty areas, pedestrian polygons and road surface area polygons. (initial measures showed that cooling system consumption can be reduced by around 15 -20 % with a well-planned building distributions, proper spaces and with using environmental friendly products and building material, temperature levels were also combined in the scenario extracted from satellite images as interpreted from thermal bands 3 times during the period of assessment. Other examples of the assessment of GIS analysis to urban sustainability took place included Waste Productivity, some effects of greenhouse gases measured by the intensity of road polygons and closeness to dwelling areas, industry areas as defined from land use land cover thematic maps produced from classified satellite images then vectors were created to take part in defining their role within the scenarios. City Noise and light intensity assessment was also investigated, as the region experiences rapid development and noise is magnified due to construction activities, closeness of the airports, and highways. The assessment investigated the measures taken by urban planners to reduce degradation or properly manage it. Finally as a conclusion tables were presented to reflect the scenario results in combination with GIS data types, analysis types, and the level of GIS data reliability to measure the sustainability level of a city related to cultural and regional demands.

Synthetic evaluation method for bridge priority ranking

In order to maintain the transportation operation, proper monitoring systems should be established on road structures, especially bridges. Since these systems need enormous investments, only a part of bridges should be equipped. Thus, the priorities of the bridges should be ranked. In this paper, a method based on two-level synthetic evaluation is proposed. First, the importance of each bridge is analyzed through the economic analysis. Six factors are considered for the bridges in a network, including construction cost, service duration, length, location importance coefficient, traffic volume, and reconstruction time. Second, the safety condition of the bridge is evaluated by using improved entropy method (IEM) which combines subjective weight with objective entropy weight. Five indices are incorporated in this step, i.e., design and construction condition, technical condition, level of overloading, hazard of wind and earthquake and environmental factors. Finally, the priorities of all the bridge in one network can be ranked and classified through a judge matrix. To demonstrate the effectiveness of the proposed method, a main highway including 16 bridges is taken as an illustrative example. The results show that the bridges can be ranked and classified quickly by using the proposed method.

Learning from ordered sets and applications in collaborative ranking

Ranking over sets arise when users choose between groups of items. For example, a group may be of those movies deemed 5 stars to them, or a customized tour package. It turns out, to model this data type properly, we need to investigate the general combinatorics problem of partitioning a set and ordering the subsets. Here we construct a probabilistic log-linear model over a set of ordered subsets. Inference in this combinatorial space is highly challenging: The space size approaches (N!/2)6.93145N+1 as N approaches infinity. We propose a split-and-merge Metropolis-Hastings procedure that can explore the state-space efficiently. For discovering hidden aspects in the data, we enrich the model with latent binary variables so that the posteriors can be efficiently evaluated. Finally, we evaluate the proposed model on large-scale collaborative filtering tasks and demonstrate that it is competitive against state-of-the-art methods.

A new dempster-shafer theory-based method with fuzzy targets for fuzzy sets ranking

In this paper, a new Fuzzy Set (FS) ranking method (for type-1 and interval type-2 FSs), which is based on the Dempster-Shafer Theory (DST) of evidence with fuzzy targets, is investigated. Fuzzy targets are adopted to reflect human viewpoints on fuzzy ranking. Two important measures in DST, i.e., the belief and plausibility measures, are used to rank FSs. The proposed approach is evaluated with several benchmark examples. The use of the belief and plausibility measures in fuzzy ranking are discussed and compared. We further analyze the capability of the proposed approach in fulfilling six reasonable fuzzy ordering properties as discussed in [9]-[11].

Discovering implicit criteria preferences reflected in tourism journal ranking lists using the Choquet Integral

Variations between journal rankings may cause confusion. As such, prior attempts were made to compare and evaluate journal ranking criteria for obtaining insightful knowledge on how different research communities have ranked journals. However, existing approaches are unable to model the journal ranking process closely enough as they are incapable of considering the relationship between multiple criteria simultaneously. In this paper, we address the challenges by introducing the Choquet Integral (CI) for evaluating journal ranking criteria. The new approach is able to account for interactions between criteria in relation to overall ranking score, using a fuzzy measure in its computation. Its properties, the Shapley value and the Interaction index, allow for good representations of importance and interactions between criteria. We demonstrate the efficiency of the CI through a case study of journal ranking lists in tourism and service journals.

A new fuzzy ranking method using fuzzy preference relations

In this paper, a new fuzzy ranking method for both type-1 and interval type-2 fuzzy sets (FSs) using fuzzy preference relations is proposed. The use of fuzzy preference relations to rank FSs with vertices has been introduced, and successfully implemented to undertake fuzzy multiple criteria hierarchical group decision-making problems. The proposed fuzzy ranking method is an extension of the results published in [1], and it is able to rank FSs with and without vertices. Besides that, it is important for a fuzzy ranking method to satisfy six reasonable fuzzy ordering properties as discussed in [6]-[8]. As a result, the capability of the proposed fuzzy ranking method in fulfilling these properties is analyzed and discussed. Issues related to time complexity of the proposed method are also examined.

From ranking fuzzy numbers to solving fuzzy linear programming: a comprehensive review

Solving fuzzy linear programming (FLP) requires the employment of a consistent ranking of fuzzy numbers. Ineffective fuzzy number ranking would lead to a flawed and erroneous solving approach. This paper presents a comprehensive and extensive review on fuzzy number ranking methods. Ranking techniques are categorised into six classes based on their characteristics. They include centroid methods, distance methods, area methods, lexicographical methods, methods based on decision maker's viewpoint, and methods based on left and right spreads. A survey on solving approaches to FLP is also reported. We then point out errors in several existing methods that are relevant to the ranking of fuzzy numbers and thence suggest an effective method to solve FLP. Consequently, FLP problems are converted into non-fuzzy single (or multiple) objective linear programming based on a consistent centroid-based ranking of fuzzy numbers. Solutions of FLP are then obtained by solving corresponding crisp single (or multiple) objective programming problems by conventional methods.

Solving fuzzy programming with a consistent fuzzy number ranking

 Some illustrative examples are provided to identify the ineffective and unrealistic characteristics of existing approaches to solving fuzzy linear programming (FLP) problems (with single or multiple objectives). We point out the error in existing methods concerning the ranking of fuzzy numbers and thence suggest an effective method to solve the FLP. Based on the consistent centroid-based ranking of fuzzy numbers, the FLP problems are transformed into non-fuzzy single (or multiple) objective linear programming. Solutions of FLP are then crisp single or multiple objective programming problems, which can respectively be obtained by conventional methods.

Modelling human preferences for ranking and collaborative filtering: a probabilistic ordered partition approach

Learning preference models from human generated data is an important task in modern information processing systems. Its popular setting consists of simple input ratings, assigned with numerical values to indicate their relevancy with respect to a specific query. Since ratings are often specified within a small range, several objects may have the same ratings, thus creating ties among objects for a given query. Dealing with this phenomena presents a general problem of modelling preferences in the presence of ties and being query-specific. To this end, we present in this paper a novel approach by constructing probabilistic models directly on the collection of objects exploiting the combinatorial structure induced by the ties among them. The proposed probabilistic setting allows exploration of a super-exponential combinatorial state-space with unknown numbers of partitions and unknown order among them. Learning and inference in such a large state-space are challenging, and yet we present in this paper efficient algorithms to perform these tasks. Our approach exploits discrete choice theory, imposing generative process such that the finite set of objects is partitioned into subsets in a stagewise procedure, and thus reducing the state-space at each stage significantly. Efficient Markov chain Monte Carlo algorithms are then presented for the proposed models. We demonstrate that the model can potentially be trained in a large-scale setting of hundreds of thousands objects using an ordinary computer. In fact, in some special cases with appropriate model specification, our models can be learned in linear time. We evaluate the models on two application areas: (i) document ranking with the data from the Yahoo! challenge and (ii) collaborative filtering with movie data. We demonstrate that the models are competitive against state-of-the-arts.