Factors affecting foster care breakdown in Spain

La ruptura del acogimiento familiar se ha definido como aquella situación en la que alguna de las partes implicadas causa una terminación de la intervención antes de haber alcanzado los objetivos establecidos en el plan de caso. Este trabajo presenta un estudio llevado a cabo en una muestra española de 318 casos cerrados de niños que fueron acogidos en familia ajena y extensa. Los datos se obtuvieron a través de la revisión exhaustiva de los expedientes de protección y acogimiento, complementada con entrevistas a los técnicos encargados de cada caso. La tasa de ruptura del conjunto de la muestra fue de 26,1%, si bien fue significativamente diferente en familia extensa (19,7%) que en familia ajena (31,2%). Los resultados de este estudio indican que las variables relacionadas con la ruptura dependen de la modalidad del acogimiento, en familia ajena o extensa. En el primer caso destacamos las variables relacionadas con las características del niño, especialmente los problemas de conducta y escolares, con especial relevancia en el grupo de 9-12 años, y el haber estado en acogimiento residencial previamente. En cambio, en extensa resulta más importante la problemática en los padres (prisión, salud mental) y el tener una medida de tutela. También el hecho de que se realice el acogimiento tras pasar por hogares de acogida resulta trascendental. Finalmente, la disponibilidad de recursos económicos e incluso los estudios de los acogedores parecen ser variables relacionadas con la ruptura de la acogida

El acogimiento en familia ajena en España: una evaluación de la práctica y sus resultados

El acogimiento familiar ha de ser la medida prioritaria para los casos de menores que deben ser separados de su família por motivos de protección. En España es una alternativa que cuenta tan sólo con veinte años de existencia y hasta la fecha no existen prácticamente datos acerca del grado de su implantación y sus características cuando se trata de acogimiento en familia ajena, mientras que son varios los trabajos que han estudiado el acogimiento en familia extensa. Este artículo presenta por primera vez en la literatura científica los datos más relevantes que permiten caracterizar la práctica del acogimiento en familia ajena en España, mediante el estudio de una muestra de seis comunidades autónomas bien representativas, con un total de 357 casos. El artículo presenta los perfiles de los niños, las familias biológicas y acogedoras, el proceso y algunos resultados sobre una submuestra de casos cerrados (n = 179). Se analizarán algunas características especialmente importantes como la larga estancia y la estabilidad de estos acogimientos, que los diferencia de los realizados en otros países

Compositional evolution with mass transfer in closed systems

Evolution of compositions in time, space, temperature or other covariates is frequent in practice. For instance, the radioactive decomposition of a sample changes its composition with time. Some of the involved isotopes decompose into other isotopes of the sample, thus producing a transfer of mass from some components to other ones, but preserving the total mass present in the system. This evolution is traditionally modelled as a system of ordinary di erential equations of the mass of each component. However, this kind of evolution can be decomposed into a compositional change, expressed in terms of simplicial derivatives, and a mass evolution (constant in this example). A rst result is that the simplicial system of di erential equations is non-linear, despite of some subcompositions behaving linearly. The goal is to study the characteristics of such simplicial systems of di erential equa- tions such as linearity and stability. This is performed extracting the compositional dif ferential equations from the mass equations. Then, simplicial derivatives are expressed in coordinates of the simplex, thus reducing the problem to the standard theory of systems of di erential equations, including stability. The characterisation of stability of these non-linear systems relays on the linearisation of the system of di erential equations at the stationary point, if any. The eigenvelues of the linearised matrix and the associated behaviour of the orbits are the main tools. For a three component system, these orbits can be plotted both in coordinates of the simplex or in a ternary diagram. A characterisation of processes with transfer of mass in closed systems in terms of stability is thus concluded. Two examples are presented for illustration, one of them is a radioactive decay

Expert supervision based on cases

The paper focuses on taking advantage of large amounts of data that are systematically stored in plants (by means of SCADA systems), but not exploited enough in order to achieve supervisory goals (fault detection, diagnosis and reconfiguration). The methodology of case base reasoning (CBR) is proposed to perform supervisory tasks in industrial processes by re-using the stored data. The goal is to take advantage of experiences, registered in a suitable structure as cam, avoiding the tedious task of knowledge acquisition and representation needed by other reasoning techniques as expert systems. An outlook of CBR terminology and basic concepts are presented. The adaptation of CBR in performing expert supervisory tasks, taking into account the particularities and difficulties derived from dynamic systems, is discussed. A special interest is focused in proposing a general case definition suitable for supervisory tasks. Finally, this structure and the whole methodology is tested in a application example for monitoring a real drier chamber

Multidisciplinary analysis of clinical cases: a transition towards active learning in dental education

In the past 2009/10 academic year, we took steps towards introduction of active methodologies, from a multidisciplinar approach, into a conventional lecture-based Dental Education program. We consolidated these practices in the current 2010/11 year, already within a new Bologna-adapted scheme. Transition involved (i) critical assessment of the limitations of traditional teaching (ii) identification of specific learning topics allowing for integration of contents, (iii) implementation of student-centred learning activities in old curricular plans (iv) assessment of students' satisfaction and perceived learning outcomes, (v) implementation of these changes in new Bologna-adapted curricula

1954 les cases barates de Vila-roja : memòria d'una desaparició anunciada i les claus del seu valor històric

Estudi de les primeres 150 “cases barates”, o de tipus social que es van edificar al barri de Vila-roja entre el 1954 i el 1957, anomenades Grup “San Daniel”, i que varen representar l'inici d'aquest barri de Girona. L'estudi incideix en la gestació, en la transformació i en la desaparició progressiva de la fesomia inicial d'aquest barri de Girona projectat i dissenyat per l’arquitecte gironí Ignasi Bosch Reitg (1910-1985), que també fou l’arquitecte del Grup Sant Narcís, de Germans Sàbat i de Sant Cugat a Salt

Identificació de paràmetres cinètics i estequiomètrics del procés de depuració de fangs actius mitjançant tècniques respiromètriques

El sistema de depuració de tipus Fangs Actius constitueix una de les tècniques més esteses arreu del món pel tractament biològic de les aigües residuals. Els softwares de modelització i simulació permeten adquirir coneixements de forma ràpida i senzilla sobre el funcionament dels processos de fangs actius, dur a terme la comparació entre diferents tecnologies de tractament i determinar les estratègies d'operació més rentables d'una EDAR minimitzant els costos. L'objectiu de la present tesi consisteix en la identificació dels principals paràmetres cinètics i coeficients estequiomètrics que caracteritzen el procés de fangs actius a partir de la mesura de la velocitat de consum d'oxigen de la biomassa. En aquest sentit s'ha dissenyat i desenvolupat un Respiròmetre Tancat Seqüencial (RTS), un Respiròmetre Tancat (RT) i un Programa d'Anàlisi de Respirometries (PAR) per la determinació dels paràmetres cinètics més representatius i característics dels sistemes de fangs actius en diferents casos.

Homes, terres, cases i masos del Baix Empordà. Estudi de les transformacions socials als segles XVIII i XIX

NOTA: Aquesta tesi va acompanyada d'un fitxer amb una base de dades de Capítols matrimonials. RESUM: L'objectiu principal d'aquesta tesi doctoral ha estat aproximar-nos als canvis socials experimentats per la comarca del Baix Empordà durant el segle XVIII i la primera meitat del segle XIX, posant especial èmfasi en els oficis relacionats amb la terra. Com a tesi principal del nostre estudi hem plantejat que la pagesia pobra va poder tenir un paper més important del que se li ha atorgat històricament en els canvis agraris i socials produïts en el transcurs d'aquests dos segles. L'estudi s'ha dut a terme a partir de l'anàlisi de dos tipus de documents principalment; els inventaris post mortem i els capítols matrimonials que ens han permés analitzar l'evolució i els canvis en alguns oficis, mostrant un col·lectiu, el dels treballadors, i posteriorment menestrals que, segons les dades analitzades, va tenir una importància més rellevant en el conjunt de la societat i de les transformacions que es produïren durant els segles XVIII i XIX del que tradicionalment se li ha atorgat.

Rhodium(I) catalyzed [2+2+2] cycloaddition reactions: experimental and theoretical studies

The [2+2+2] cycloaddition reaction involves the formation of three carbon-carbon bonds in one single step using alkynes, alkenes, nitriles, carbonyls and other unsaturated reagents as reactants. This is one of the most elegant methods for the construction of polycyclic aromatic compounds and heteroaromatic, which have important academic and industrial uses. The thesis is divided into ten chapters including six related publications. The first study based on the Wilkinson’s catalyst, RhCl(PPh3)3, compares the reaction mechanism of the [2+2+2] cycloaddition process of acetylene with the cycloaddition obtained for the model of the complex, RhCl(PH3)3. In an attempt to reduce computational costs in DFT studies, this research project aimed to substitute PPh3 ligands for PH3, despite the electronic and steric effects produced by PPh3 ligands being significantly different to those created by PH3 ones. In this first study, detailed theoretical calculations were performed to determine the reaction mechanism of the two complexes. Despite some differences being detected, it was found that modelling PPh3 by PH3 in the catalyst helps to reduce the computational cost significantly while at the same time providing qualitatively acceptable results. Taking into account the results obtained in this earlier study, the model of the Wilkinson’s catalyst, RhCl(PH3)3, was applied to study different [2+2+2] cycloaddition reactions with unsaturated systems conducted in the laboratory. Our research group found that in the case of totally closed systems, specifically 15- and 25-membered azamacrocycles can afford benzenic compounds, except in the case of 20-membered azamacrocycle (20-MAA) which was inactive with the Wilkinson’s catalyst. In this study, theoretical calculations allowed to determine the origin of the different reactivity of the 20-MAA, where it was found that the activation barrier of the oxidative addition of two alkynes is higher than those obtained for the 15- and 25-membered macrocycles. This barrier was attributed primarily to the interaction energy, which corresponds to the energy that is released when the two deformed reagents interact in the transition state. The main factor that helped to provide an explanation to the different reactivity observed was that the 20-MAA had a more stable and delocalized HOMO orbital in the oxidative addition step. Moreover, we observed that the formation of a strained ten-membered ring during the cycloaddition of 20-MAA presents significant steric hindrance. Furthermore, in Chapter 5, an electrochemical study is presented in collaboration with Prof. Anny Jutand from Paris. This work allowed studying the main steps of the catalytic cycle of the [2+2+2] cycloaddition reaction between diynes with a monoalkyne. First kinetic data were obtained of the [2+2+2] cycloaddition process catalyzed by the Wilkinson’s catalyst, where it was observed that the rate-determining step of the reaction can change depending on the structure of the starting reagents. In the case of the [2+2+2] cycloaddition reaction involving two alkynes and one alkene in the same molecule (enediynes), it is well known that the oxidative coupling may occur between two alkynes giving the corresponding metallacyclopentadiene, or between one alkyne and the alkene affording the metallacyclopentene complex. Wilkinson’s model was used in DFT calculations to analyze the different factors that may influence in the reaction mechanism. Here it was observed that the cyclic enediynes always prefer the oxidative coupling between two alkynes moieties, while the acyclic cases have different preferences depending on the linker and the substituents used in the alkynes. Moreover, the Wilkinson’s model was used to explain the experimental results achieved in Chapter 7 where the [2+2+2] cycloaddition reaction of enediynes is studied varying the position of the double bond in the starting reagent. It was observed that enediynes type yne-ene-yne preferred the standard [2+2+2] cycloaddition reaction, while enediynes type yne-yne-ene suffered β-hydride elimination followed a reductive elimination of Wilkinson’s catalyst giving cyclohexadiene compounds, which are isomers from those that would be obtained through standard [2+2+2] cycloaddition reactions. Finally, the last chapter of this thesis is based on the use of DFT calculations to determine the reaction mechanism when the macrocycles are treated with transition metals that are inactive to the [2+2+2] cycloaddition reaction, but which are thermally active leading to new polycyclic compounds. Thus, a domino process was described combining an ene reaction and a Diels-Alder cycloaddition.