Estudi d'una metal·lotioneïna d'alzina surera (QsMT)

En aquest treball es caracteriza per primera vegada la capacitat de coordinació metàl·lica d'una metal·lotineïna (MT) de planta i es proposa un model de plegament per a les MTs de planta en general. Els resultat mostren que aquestes proteïnes poden tenir un paper molt important en la regulació de l'estat redox de les cèl·lules, probablement a través de la coordinació a Cu. Les MTs de planta són proteïnes molt desconegudes. Es postula que participen en l'homeòstasi del Cu i en la protecció contra l'estrès oxidatiu, però es desconeix la capacitat de coordinació metàl·lica i el plegament. En aquest treball s'han estudiat una metal·lotioneïna d'alzina surera, QsMT, aïllada d'una llibreria de cDNA de fel·lema. Els objectius concrets han estat: (1) estudiar l'expressió de QsMT i la resposta a l'estrès oxidatiu; (2) determinar la capacitat de coordinació metàl·lica i la funcionalitat in vivo; (3) fer una aproximació al plegament de les MTs de planta. L'expressió del gen s'ha estudiat mitjançant hibridació in situ en plàntules i en embrions d'alzina surera. QsMT s'expressa majoritàriament en cèl·lules amb fort estrès oxidatiu, associat a la síntesi de polifenols (suberització i lignificació) i a la senescència. També s'expressa en cèl·lules meristemàtiques, cèl·lules en divisió molt activa on la funció de les MTs podria estar relacionada amb el manteniment de l'estat redox. L'aplicació d'estrès oxidatiu exogen (H2O2 i paraquat) incrementa fortament l'expressió de QsMT en teixits amb expressió constitutiva, confirmant la regulació de l'expressió del gen per estrès oxidatiu. Per l'estudi de les propietats de coordinació metàl·lica es va expressar QsMT en cèl·lules d'E. coli en medi de cultiu suplementat amb Cu, Zn o Cd. Es van aïllar els agregats metàl·lics corresponents i es van analitzar mitjançant tècniques espectroscòpiques i espectromètriques (ICP-OES, ESI-MS i CD). Els resultats mostren que QsMT coordina de forma estable Cu (8 ions metàl·lics/molècula), Zn (4 ions de Zn/molècula) i Cd (6 ions de Cd/molècula), i adopta una estructura especialment quiral en coordinació a Cu. L'elevada capacitat quelant de la proteïna i la quiralitat de l'estructura indiquen que QsMT possiblement té preferència metàl·lica pel Cu i per tant una funció relacionada amb aquest metall in vivo. Estudis de complementació en llevat demostren que QsMT coordina Cu de forma funcional in vivo. En coordinació a Cd QsMT presenta una peculiaritat no observada fins ara en altres MTs: la participació d'ions sulfur en la formació de l'agregat metàl·lic incrementant la capacitat de coordinació metàl·lica (6 ions metàl·lics divalents de Cd enlloc de 4 ions de Zn). A més QsMT coordina Cd de forma funcional en llevat, i per tant la seva funció també podria estar relacionada amb la destoxicació de Cd en la planta. QsMT s'ha utilitzat com a model per fer una aproximació al plegament de les MTs de planta. Amb aquest objectiu vam dissenyar tres pèptids mutants derivats de QsMT: N25 corresponent a la zona rica en cisteïna en posició amino-terminal, C18 corresponent a la zona rica en cisteïna en posició carboxil-terminal, i N25-C18 corresponent a les dues zones riques en cisteïna enllaçades per 4 glicines substituint la zona central de 39 aminoàcids. Es van expressar i estudiar aquests pèptids per les mateixes tècniques utilitzades en l'estudi de QsMT. Els resultats indiquen que QsMT es plega formant un sol agregat metàl·lic per la interacció de les dues zones riques en cisteïna. En aquest model la zona central d'enllaç, típica de les MTs de planta, no participa en la coordinació metàl·lica però és imprescindible per a la funció de la proteïna. El paper de la zona central podria variar en funció del metall que coordina, participant en el plegament i estructura de la proteïna quan coordina Zn i Cd i en la seva regulació i estabilització quan coordina Cu.

Modelling, control and supervision for a class of hybrid systems

The aim of this thesis is to narrow the gap between two different control techniques: the continuous control and the discrete event control techniques DES. This gap can be reduced by the study of Hybrid systems, and by interpreting as Hybrid systems the majority of large-scale systems. In particular, when looking deeply into a process, it is often possible to identify interaction between discrete and continuous signals. Hybrid systems are systems that have both continuous, and discrete signals. Continuous signals are generally supposed continuous and differentiable in time, since discrete signals are neither continuous nor differentiable in time due to their abrupt changes in time. Continuous signals often represent the measure of natural physical magnitudes such as temperature, pressure etc. The discrete signals are normally artificial signals, operated by human artefacts as current, voltage, light etc. Typical processes modelled as Hybrid systems are production systems, chemical process, or continuos production when time and continuous measures interacts with the transport, and stock inventory system. Complex systems as manufacturing lines are hybrid in a global sense. They can be decomposed into several subsystems, and their links. Another motivation for the study of Hybrid systems is the tools developed by other research domains. These tools benefit from the use of temporal logic for the analysis of several properties of Hybrid systems model, and use it to design systems and controllers, which satisfies physical or imposed restrictions. This thesis is focused in particular types of systems with discrete and continuous signals in interaction. That can be modelled hard non-linealities, such as hysteresis, jumps in the state, limit cycles, etc. and their possible non-deterministic future behaviour expressed by an interpretable model description. The Hybrid systems treated in this work are systems with several discrete states, always less than thirty states (it can arrive to NP hard problem), and continuous dynamics evolving with expression: with Ki ¡ Rn constant vectors or matrices for X components vector. In several states the continuous evolution can be several of them Ki = 0. In this formulation, the mathematics can express Time invariant linear system. By the use of this expression for a local part, the combination of several local linear models is possible to represent non-linear systems. And with the interaction with discrete events of the system the model can compose non-linear Hybrid systems. Especially multistage processes with high continuous dynamics are well represented by the proposed methodology. Sate vectors with more than two components, as third order models or higher is well approximated by the proposed approximation. Flexible belt transmission, chemical reactions with initial start-up and mobile robots with important friction are several physical systems, which profits from the benefits of proposed methodology (accuracy). The motivation of this thesis is to obtain a solution that can control and drive the Hybrid systems from the origin or starting point to the goal. How to obtain this solution, and which is the best solution in terms of one cost function subject to the physical restrictions and control actions is analysed. Hybrid systems that have several possible states, different ways to drive the system to the goal and different continuous control signals are problems that motivate this research. The requirements of the system on which we work is: a model that can represent the behaviour of the non-linear systems, and that possibilities the prediction of possible future behaviour for the model, in order to apply an supervisor which decides the optimal and secure action to drive the system toward the goal. Specific problems can be determined by the use of this kind of hybrid models are: - The unity of order. - Control the system along a reachable path. - Control the system in a safe path. - Optimise the cost function. - Modularity of control The proposed model solves the specified problems in the switching models problem, the initial condition calculus and the unity of the order models. Continuous and discrete phenomena are represented in Linear hybrid models, defined with defined eighth-tuple parameters to model different types of hybrid phenomena. Applying a transformation over the state vector : for LTI system we obtain from a two-dimensional SS a single parameter, alpha, which still maintains the dynamical information. Combining this parameter with the system output, a complete description of the system is obtained in a form of a graph in polar representation. Using Tagaki-Sugeno type III is a fuzzy model which include linear time invariant LTI models for each local model, the fuzzyfication of different LTI local model gives as a result a non-linear time invariant model. In our case the output and the alpha measure govern the membership function. Hybrid systems control is a huge task, the processes need to be guided from the Starting point to the desired End point, passing a through of different specific states and points in the trajectory. The system can be structured in different levels of abstraction and the control in three layers for the Hybrid systems from planning the process to produce the actions, these are the planning, the process and control layer. In this case the algorithms will be applied to robotics ¡V a domain where improvements are well accepted ¡V it is expected to find a simple repetitive processes for which the extra effort in complexity can be compensated by some cost reductions. It may be also interesting to implement some control optimisation to processes such as fuel injection, DC-DC converters etc. In order to apply the RW theory of discrete event systems on a Hybrid system, we must abstract the continuous signals and to project the events generated for these signals, to obtain new sets of observable and controllable events. Ramadge & Wonham¡¦s theory along with the TCT software give a Controllable Sublanguage of the legal language generated for a Discrete Event System (DES). Continuous abstraction transforms predicates over continuous variables into controllable or uncontrollable events, and modifies the set of uncontrollable, controllable observable and unobservable events. Continuous signals produce into the system virtual events, when this crosses the bound limits. If this event is deterministic, they can be projected. It is necessary to determine the controllability of this event, in order to assign this to the corresponding set, , controllable, uncontrollable, observable and unobservable set of events. Find optimal trajectories in order to minimise some cost function is the goal of the modelling procedure. Mathematical model for the system allows the user to apply mathematical techniques over this expression. These possibilities are, to minimise a specific cost function, to obtain optimal controllers and to approximate a specific trajectory. The combination of the Dynamic Programming with Bellman Principle of optimality, give us the procedure to solve the minimum time trajectory for Hybrid systems. The problem is greater when there exists interaction between adjacent states. In Hybrid systems the problem is to determine the partial set points to be applied at the local models. Optimal controller can be implemented in each local model in order to assure the minimisation of the local costs. The solution of this problem needs to give us the trajectory to follow the system. Trajectory marked by a set of set points to force the system to passing over them. Several ways are possible to drive the system from the Starting point Xi to the End point Xf. Different ways are interesting in: dynamic sense, minimum states, approximation at set points, etc. These ways need to be safe and viable and RchW. And only one of them must to be applied, normally the best, which minimises the proposed cost function. A Reachable Way, this means the controllable way and safe, will be evaluated in order to obtain which one minimises the cost function. Contribution of this work is a complete framework to work with the majority Hybrid systems, the procedures to model, control and supervise are defined and explained and its use is demonstrated. Also explained is the procedure to model the systems to be analysed for automatic verification. Great improvements were obtained by using this methodology in comparison to using other piecewise linear approximations. It is demonstrated in particular cases this methodology can provide best approximation. The most important contribution of this work, is the Alpha approximation for non-linear systems with high dynamics While this kind of process is not typical, but in this case the Alpha approximation is the best linear approximation to use, and give a compact representation.