Angepasste Kommunikationssysteme für den effizienten Einsatz in dezentralen elektrischen Versorgungsstrukturen

Angepasste Kommunikationssysteme für den effizienten Einsatz in dezentralen elektrischen Versorgungsstrukturen - In öffentlichen Elektrizitätsnetzen wird der Informationsaustausch seit längerem durch historisch gewachsene und angepasste Systeme erfolgreich bewerkstelligt. Basierend auf einem weiten Erfahrungsspektrum und einer gut ausgebauten Kommunikationsinfrastruktur stellt die informationstechnische Anbindung eines Teilnehmers im öffentlichen Versorgungsnetz primär kein Hemmnis dar. Anders gestaltet sich dagegen die Situation in dezentralen Versorgungsstrukturen. Da die Elektrifizierung von dezentralen Versorgungsgebieten, mittels der Vernetzung vieler verteilter Erzeugungsanlagen und des Aufbaus von nicht an das öffentliche Elektrizitätsnetz angeschlossenen Verteilnetzen (Minigrids), erst in den letzten Jahren an Popularität gewonnen hat, sind nur wenige Projekte bis dato abgeschlossen. Für die informationstechnische Anbindung von Teilnehmern in diesen Strukturen bedeutet dies, dass nur in einem sehr begrenzten Umfang auf Erfahrungswerte bei der Systemauswahl zurückgegriffen werden kann. Im Rahmen der Dissertation ist deshalb ein Entscheidungsfindungsprozess (Leitfaden für die Systemauswahl) entwickelt worden, der neben einem direkten Vergleich von Kommunikationssystemen basierend auf abgeleiteten Bewertungskriterien und Typen, der Reduktion des Vergleichs auf zwei Systemwerte (relativer Erwartungsnutzenzuwachs und Gesamtkostenzuwachs), die Wahl eines geeigneten Kommunikationssystems für die Applikation in dezentralen elektrischen Versorgungsstrukturen ermöglicht. In Anlehnung an die klassische Entscheidungstheorie werden mit der Berechnung eines Erwartungsnutzens je Kommunikationssystems, aus der Gesamtsumme der Einzelprodukte der Nutzwerte und der Gewichtungsfaktor je System, sowohl die technischen Parameter und applikationsspezifischen Aspekte, als auch die subjektiven Bewertungen zu einem Wert vereint. Mit der Ermittlung der jährlich erforderlichen Gesamtaufwendungen für ein Kommunikationssystem bzw. für die anvisierten Kommunikationsaufgaben, in Abhängigkeit der Applikation wird neben dem ermittelten Erwartungsnutzen des Systems, ein weiterer Entscheidungsparameter für die Systemauswahl bereitgestellt. Die anschließende Wahl geeigneter Bezugsgrößen erlaubt die Entscheidungsfindung bzgl. der zur Auswahl stehenden Systeme auf einen Vergleich mit einem Bezugssystem zurückzuführen. Hierbei sind nicht die absoluten Differenzen des Erwartungsnutzen bzw. des jährlichen Gesamtaufwandes von Interesse, sondern vielmehr wie sich das entsprechende System gegenüber dem Normal (Bezugssystem) darstellt. Das heißt, der relative Zuwachs des Erwartungsnutzen bzw. der Gesamtkosten eines jeden Systems ist die entscheidende Kenngröße für die Systemauswahl. Mit dem Eintrag der berechneten relativen Erwartungsnutzen- und Gesamtkostenzuwächse in eine neu entwickelte 4-Quadranten-Matrix kann unter Berücksichtigung der Lage der korrespondierenden Wertepaare eine einfache (grafische) Entscheidung bzgl. der Wahl des für die Applikation optimalsten Kommunikationssystems erfolgen. Eine exemplarisch durchgeführte Systemauswahl, basierend auf den Analyseergebnissen von Kommunikationssystemen für den Einsatz in dezentralen elektrischen Versorgungsstrukturen, veranschaulicht und verifiziert die Handhabung des entwickelten Konzeptes. Die abschließende Realisierung, Modifikation und Test des zuvor ausgewählten Distribution Line Carrier Systems unterstreicht des Weiteren die Effizienz des entwickelten Entscheidungsfindungsprozesses. Dem Entscheidungsträger für die Systemauswahl wird insgesamt ein Werkzeug zur Verfügung gestellt, das eine einfache und praktikable Entscheidungsfindung erlaubt. Mit dem entwickelten Konzept ist erstmals eine ganzheitliche Betrachtung unter Berücksichtigung sowohl der technischen und applikationsspezifischen, als auch der ökonomischen Aspekte und Randbedingungen möglich, wobei das Entscheidungsfindungskonzept nicht nur auf die Systemfindung für dezentrale elektrische Energieversorgungsstrukturen begrenzt ist, sondern auch bei entsprechender Modifikation der Anforderungen, Systemkenngrößen etc. auf andere Applikationsanwendungen übertragen werden.

Collaborative design procedures for architects and engineers

This book argues for novel strategies to integrate engineering design procedures and structural analysis data into architectural design. Algorithmic procedures that recently migrated into the architectural practice are utilized to improve the interface of both disciplines. Architectural design is predominately conducted as a negotiation process of various factors but often lacks rigor and data structures to link it to quantitative procedures. Numerical structural design on the other hand could act as a role model for handling data and robust optimization but it often lacks the complexity of architectural design. The goal of this research is to bring together robust methods from structural design and complex dependency networks from architectural design processes. The book presents three case studies of tools and methods that are developed to exemplify, analyze and evaluate a collaborative work flow.

Application of biogas slurries from energy crops to arable soils and their impact on carbon and nitrogen dynamics

The use of renewable primary products as co-substrate or single substrate for biogas production has increased consistently over the last few years. Maize silage is the preferential energy crop used for fermentation due to its high methane (CH4) yield per hectare. Equally, the by-product, namely biogas slurry (BS), is used with increasing frequency as organic fertilizer to return nutrients to the soil and to maintain or increase the organic matter stocks and soil fertility. Studies concerning the application of energy crop-derived BS on the carbon (C) and nitrogen (N) mineralization dynamics are scarce. Thus, this thesis focused on the following objectives: I) The determination of the effects caused by rainfall patterns on the C and N dynamics from two contrasting organic fertilizers, namely BS from maize silage and composted cattle manure (CM), by monitoring emissions of nitrous oxide (N2O), carbon dioxide (CO2) and CH4 as well as leaching losses of C and N. II) The investigation of the impact of differences in soil moisture content after the application of BS and temperature on gaseous emissions (CO2, N2O and CH4) and leaching of C and N compounds. III) A comparison of BS properties obtained from biogas plants with different substrate inputs and operating parameters and their effect on C and N dynamics after application to differently textured soils with varying application rates and water contents. For the objectives I) and II) two experiments (experiment I and II) using undisturbed soil cores of a Haplic Luvisol were carried out. Objective III) was studied on a third experiment (experiment III) with disturbed soil samples. During experiment I three rainfall patterns were implemented including constant irrigation, continuous irrigation with periodic heavy rainfall events, and partial drying with rewetting periods. Biogas slurry and CM were applied at a rate of 100 kg N ha-1. During experiment II constant irrigation and an irrigation pattern with partial drying with rewetting periods were carried out at 13.5°C and 23.5°C. The application of BS took place either directly before a rewetting period or one week after the rewetting period stopped. Experiment III included two soils of different texture which were mixed with ten BS’s originating from ten different biogas plants. Treatments included low, medium and high BS-N application rates and water contents ranging from 50% to 100% of water holding capacity (WHC). Experiment I and II showed that after the application of BS cumulative N2O emissions were 4 times (162 mg N2O-N m-2) higher compared to the application of CM caused by a higher content of mineral N (Nmin) in the form of ammonium (NH4+) in the BS. The cumulative emissions of CO2, however, were on the same level for both fertilizers indicating similar amounts of readily available C after composting and fermentation of organic material. Leaching losses occurred predominantly in the mineral form of nitrate (NO3-) and were higher in BS amended soils (9 mg NO3--N m-2) compared to CM amended soils (5 mg NO3--N m-2). The rainfall pattern in experiment I and II merely affected the temporal production of C and N emissions resulting in reduced CO2 and enhanced N2O emissions during stronger irrigation events, but showed no effect on the cumulative emissions. Overall, a significant increase of CH4 consumption under inconstant irrigation was found. The time of fertilization had no effect on the overall C and N dynamics. Increasing temperature from 13.5°C to 23.5°C enhanced the CO2 and N2O emissions by a factor of 1.7 and 3.7, respectively. Due to the increased microbial activity with increasing temperature soil respiration was enhanced. This led to decreasing oxygen (O2) contents which in turn promoted denitrification in soil due to the extension of anaerobic microsites. Leaching losses of NO3- were also significantly affected by increasing temperature whereas the consumption of CH4 was not affected. The third experiment showed that the input materials of biogas plants affected the properties of the resulting BS. In particular the contents of DM and NH4+ were determined by the amount of added plant biomass and excrement-based biomass, respectively. Correlations between BS properties and CO2 or N2O emissions were not detected. Solely the ammonia (NH3) emissions showed a positive correlation with NH4+ content in BS as well as a negative correlation with the total C (Ct) content. The BS-N application rates affected the relative CO2 emissions (% of C supplied with BS) when applied to silty soil as well as the relative N2O emissions (% of N supplied with BS) when applied to sandy soil. The impacts on the C and N dynamics induced by BS application were exceeded by the differences induced by soil texture. Presumably, due to the higher clay content in silty soils, organic matter was stabilized by organo-mineral interactions and NH4+ was adsorbed at the cation exchange sites. Different water contents induced highest CO2 emissions and therefore optimal conditions for microbial activity at 75% of WHC in both soils. Cumulative nitrification was also highest at 75% and 50% of WHC whereas the relative N2O emissions increased with water content and showed higher N2O losses in sandy soils. In summary it can be stated that the findings of the present thesis confirmed the high fertilizer value of BS’s, caused by high concentrations of NH4+ and labile organic compounds such as readily available carbon. These attributes of BS’s are to a great extent independent of the input materials of biogas plants. However, considerably gaseous and leaching losses of N may occur especially at high moisture contents. The emissions of N2O after field application corresponded with those of animal slurries.

Effect of planting methods and cyanobacterial inoculants on yield, water productivity and economics of rice cultivation

The impact of two crop planting methods and of the application of cyanobacterial inoculants on plant growth, yield, water productivity and economics of rice cultivation was evaluated with the help of a split plot designed experiment during the rainy season of 2011 in New Delhi, India. Conventional transplanting and system of rice intensification (SRI) were tested as two different planting methods and seven treatments that considered cyanobacterial inoculants and compost were applied with three repetitions each. Results revealed no significant differences in plant performance and crop yield between both planting methods. However, the application of biofilm based BGA bio-fertiliser + 2/3 N had an overall positive impact on both, plant performance (plant height, number of tillers) and crop yield (number and weight of panicles) as well as on grain and straw yield. Higher net return and a higher benefit-cost ratio were observed in rice fields under SRI planting method, whereas the application of BGA + PGPR + 2/3 N resulted in highest values. Total water productivity and irrigation water productivity was significantly higher under SRI practices (5.95 and 3.67 kg ha^(-1) mm^(-1)) compared to practices of conventional transplanting (3.36 and 2.44), meaning that using SRI method, water saving of about 34 % could be achieved and significantly less water was required to produce one kg of rice. This study could show that a combination of plant growth promoting rhizobacteria (PGPR) in conjunction with BGA and 2/3 dose of mineral N fertiliser can support crop growth performance, crop yields and reduces overall production cost, wherefore this practices should be used in the integrated nutrient management of rice fields in India.