Metal and precursor effect during 1-heptyne selective hydrogenation using an activated carbon as support

Palladium, platinum, and ruthenium supported on activated carbon were used as catalysts for the selective hydrogenation of 1-heptyne, a terminal alkyne. All catalysts were characterized by temperature programmed reduction, X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy. TPR and XPS suggest that the metal in all catalysts is reduced after the pretreatment with H2 at 673 K. The TPR trace of the PdNRX catalyst shows that the support surface groups are greatly modified as a consequence of the use of HNO3 during the catalyst preparation. During the hydrogenation of 1-heptyne, both palladium catalysts were more active and selective than the platinum and ruthenium catalysts. The activity order of the catalysts is as follows: PdClRX > PdNRX > PtClRX ≫ RuClRX. This superior performance of PdClRX was attributed in part to the total occupancy of the d electronic levels of the Pd metal that is supposed to promote the rupture of the H2 bond during the hydrogenation reaction. The activity differences between PdClRX and PdNRX catalysts could be attributed to a better accessibility of the substrate to the active sites, as a consequence of steric and electronic effects of the superficial support groups. The order for the selectivity to 1-heptene is as follows: PdClRX = PdNRX > RuClRX > PtClRX, and it can be mainly attributed to thermodynamic effects.

Experiencias en un grupo de apoyo para madres con hijos menores de un año

El proceso de la maternidad, según Mercer, implica que la madre nazca psicológicamente, dando lugar a una nueva identidad en constante crecimiento y desarrollo. El modelo de esta autora puede servir a la enfermera para valorar, planificar, ejecutar y evaluar el cuidado enfermero de las madres y sus bebés en sus intervenciones. Este estudio cualitativo, de enfoque etnográfico, dirigido a grupos de madres con hijos menores de un año, utilizará la observación participante y el diario de campo para describir y relacionar los contenidos de las dinámicas grupales con el desarrollo del rol maternal. Se identifican 3 categorías y 50 códigos y se destaca que las enfermeras, como profesionales competentes en aspectos conceptuales y técnicos propios de su disciplina, utilizan los modelos de Mercer y Beck para acompañar a las madres coordinándose con otros profesionales.

Estilos de empoderamiento y factores sociodemográficos en jóvenes con discapacidad

Introducción. El concepto de empoderamiento está cobrando interés en los programas de apoyo hacia la integración psicosocial de las personas con discapacidad. Esta capacidad implica la posesión de múltiples habilidades que ayudan a las personas a afrontar la adversidad, por lo que el desarrollo de esta capacidad puede ser prioritario entre estas personas para mejorar su calidad de vida. Objetivos. Los objetivos del estudio son analizar la capacidad de empoderamiento de un grupo de personas con discapacidad en función de la edad, nivel de estudios, ocupación y redes de apoyo. Metodología. Participaron 98 jóvenes con diferentes tipos de discapacidad (física, intelectual, visual y auditiva). Contestaron la versión española adaptada de la Escala de Rogers, Chamberlin, Ellison y Crean (1997), que es diseñada para medir esta capacidad. Resultados. Los resultados indicaron altos niveles de esta capacidad entre las personas con discapacidad observándose en mayor medida en los participantes con ocupación. Conclusiones. Esto nos sugiere que esta capacidad puede evolucionar y de ahí la importancia de fomentarla en programas de intervención-acción.

Electrochemical generation of oxygen-containing groups in an ordered microporous zeolite-templated carbon

Zeolite templated carbon (ZTC) was electrochemically oxidized under various conditions, and its chemistry and structural evolution were compared to those produced by conventional chemical oxidation. In both oxidation methods, a general loss of the original structure regularity and high surface area was observed with increasing amount of oxidation. However, the electrochemical method showed much better controllability and enabled the generation of a large number of oxygen functional groups while retaining the original structure of the ZTC. Unlike chemical treatments, highly microporous carbons with an ordered 3-D structure, high surface area (ranging between 1900 and 3500 m2/g) and a large number of oxygen groups (O = 11,000–3300 μmol/g), have been prepared by the electrochemical method. Some insights into the electrooxidation mechanism of carbon materials are proposed from the obtained polarization curves, using ZTC as a model carbon material.

Professionals’ Perceptions of Support Resources for Battered Immigrant Women Chronicle of an Anticipated Failure

The aim of this study was to explore the experience of service providers in Spain regarding their daily professional encounters with battered immigrant women and their perception of this group’s help-seeking process and the eventual abandonment of the same. Twenty-nine in-depth interviews and four focus group discussions were conducted with a total of 43 professionals involved in providing support to battered immigrant women. We interviewed social workers, psychologists, intercultural mediators, judges, lawyers, and public health professionals from Spain. Through qualitative content analysis, four categories emerged: (a) frustration with the victim’s decision to abandon the help-seeking process, (b) ambivalent positions regarding differences between immigrant and Spanish women, (c) difficulties in the migratory process that may hinder the help-seeking process, and (d) criticisms regarding the inefficiency of existing resources. The four categories were cross-cut by an overarching theme: helping immigrant women not to abandon the help-seeking process as a chronicle of anticipated failure. The main reasons that emerged for abandoning the help-seeking process involved structural factors such as economic dependence, loss of social support after leaving their country of origin, and limited knowledge about available resources. The professionals perceived their encounters with battered immigrant women to be frustrating and unproductive because they felt that they had few resources to back them up. They felt that despite the existence of public policies targeting intimate partner violence (IPV) and immigration in Spain, the resources dedicated to tackling gender-based violence were insufficient to meet battered immigrant women’s needs. Professionals should be trained both in the problem of IPV and in providing support to the immigrant population.

Effect of the surface chemical groups of activated carbons on their surface adsorptivity to aromatic adsorbates based on π-π interactions

Three activated carbons with different surface chemical groups were used to analyse the influence of these groups on their adsorption capacities towards aromatic-type molecules whose adsorption is based on π-π interactions with surface arene centres. The three activated carbons studied were a low-functionalized carbon (Merck), an oxygen-rich carbon obtained by HNO3 oxidation of Merck, and a nitrogen-rich carbon also prepared from Merck by mild HNO3 oxidation followed by treatment with a dicyanodiamide/dimethyl formamide mixture at 300 °C. The nature of the surface chemical groups of the three activated carbons was investigated by both physical and chemical techniques (TPD, XPS, Boehm analysis and pH potentiometric titration). A systematic study of the adsorptions of a series of analogous aromatic adsorbates on the three activated carbons was carried out to study the adsorption mechanisms. In all cases the adsorption mechanism is based on π-π interactions between the aromatic moiety of the adsorbates and the arene centres of the graphite sheets. The differences in the normalized adsorption capacities of the adsorbents for a set of adsorbates indicate that the π-donor or π-withdrawing character of the functional groups have a clear influence on the basicity of the arene centres.

Methane dry reforming over Ni supported on pine sawdust activated carbon: Effects of support surface properties and metal loading

The influence of metal loading and support surface functional groups (SFG) on methane dry reforming (MDR) over Ni catalysts supported on pine-sawdust derived activated carbon were studied. Using pine sawdust as the catalyst support precursor, the smallest variety and lowest concentration of SFG led to best Ni dispersion and highest catalytic activity, which increased with Ni loading up to 3 Ni atoms nm-2. At higher Ni loading, the formation of large metal aggregates was observed, consistent with a lower "apparen" surface area and a decrease in catalytic activity. The H2/CO ratio rose with increasing reaction temperature, indicating that increasingly important side reactions were taking place in addition to MDR.

Enhanced electro-oxidation resistance of carbon electrodes induced by phosphorus surface groups

The electro-oxidation of carbon materials enormously degrades their performance and limits their wider utilization in multiple electrochemical applications. In this work, the positive influence of phosphorus functionalities on the overall electrochemical stability of carbon materials has been demonstrated under different conditions. We show that the extent and selectivity of electroxidation in P-containing carbons are completely different to those observed in conventional carbons without P. The electro-oxidation of P-containing carbons involves the active participation of phosphorus surface groups, which are gradually transformed at high potentials from less-to more-oxidized species to slow down the introduction of oxygen groups on the carbon surface (oxidation) and the subsequent generation of (C*OOH)-like unstable promoters of electro-gasification. The highest-oxidized P groups (–C–O–P-like species) seem to distribute the gained oxygen to neighboring carbon sites, which finally suffer oxidation and/or gasification. So it is thought that P-groups could act as mediators of carbon oxidation although including various steps and intermediates compared to electroxidation in P-free materials.

Improvement of carbon materials performance by nitrogen functional groups in electrochemical capacitors in organic electrolyte at severe conditions

N-doped activated carbon fibers have been synthesized by using chemically polymerized aniline as source of nitrogen. Commercial activated carbon fibers (A20) were chemically modified with a thin film of polyaniline (PANI) inside the microporosity of the carbon fibers. The modified activated carbon fibers were carbonized at 600 and 800 °C, respectively. In this way, activated carbon fibers modified with surface nitrogen species were prepared in order to analyze their influence in the performance of electrochemical capacitors in organic electrolyte. Symmetric capacitors were made of activated carbon fibers and N-doped activated carbon fibers and tested in a two-electrode cell configuration, using triethylmethylammonium tetrafluoroborate/propylene carbonate (TEMA-BF4/PC) as electrolyte. The effect of nitrogen species in the degradation or stabilization of the capacitor has been analyzed through floating durability tests using a high voltage charging (3.2 V). The results show higher stabilizing effect in carbonized samples (N-ACF) than in non-carbonized samples and pristine activated carbon fibers, which is attributed to the presence of aromatic nitrogen group, especially positively charged N-functional groups.

Importance of the Support Properties for Immobilization or Purification of Enzymes

Immobilization and purification of enzymes are usual requirements for their industrial use. Both purification and immobilization have a common factor: they use a solid activated support. Using a support for enzyme purification means having mild conditions for enzyme release and a selective enzyme–support interaction is interesting. When using a support for immobilization, however, enzyme desorption is a problem. The improvement of enzyme features through immobilization is a usual objective (e.g., stability, selectivity). Thus, a support designed for enzyme purification and a support designed for enzyme immobilization may differ significantly. In this review, we will focus our attention on the requirements of a support surface to produce the desired objectives. The ideal physical properties of the matrix, the properties of the introduced reactive groups, the best surface activation degree to reach the desired objective, and the properties of the reactive groups will be discussed.