Quality assurance experience with the randomized neuropathic bone pain trial (Trans-Tasman Radiation Oncology Group, 96.05)

Background and purpose: Trans-Tasman Radiation Oncology Group 96.05 is a prospective randomized controlled trial comparing a single 8 Gy with 20 Gy in five fractions of radiotherapy (RT) for neuropathic pain due to bone metastases. This paper summarizes the quality assurance (QA) activities for the first 234 patients (accrual target 270). Materials and methods: Independent audits to assess compliance with eligibility/exclusion criteria and appropriateness of treatment of the index site were conducted after each cohort of approximately 45 consecutive patients. Reported serious adverse events (SAEs) in the form of cord/cauda equina compression or pathological fracture developing at the index site were investigated and presented in batches to the Independent Data Monitoring Committee. Finally, source data verification of the RT prescription page and treatment records was undertaken for each of the first 234 patients to assess compliance with the protocol. Results: Only one patient was found conclusively not to have genuine neuropathic pain, and there were no detected 'geographical misses' with RT fields. The overall rate of detected infringements for other eligibility criteria over five audits (225 patients) was 8% with a dramatic improvement after the first audit. There has at no stage been a statistically significant difference in SAEs by randomization arm. There was a 22% rate of RT protocol variations involving ten of the 14 contributing centres, although the rate of major dose violations (more than +/- 10% from protocol dose) was only 6% with no statistically significant difference by randomization arm (P = 0.44). Conclusions: QA auditing is an essential but time-consuming component of RT trials, including those assessing palliative endpoints. Our experience confirms that all aspects should commence soon after study activation. Crown Copyright (C) 2003 Published by Elsevier Science Ltd. All rights reserved.

Quality assurance of paediatric cardiac surgery: A prospective 6-year analysis

Objective: To audit effective quality assurance methods to monitor outcomes following paediatric cardiac surgery at a single institution. Methods: All patients undergoing cardiac surgery from January 1996 to December 2001 were enrolled prospectively. Patients were stratified by complexity of surgical procedure into four groups, with Category 4 being the most complex procedure. Outcome measures included death, length of admission and morbidity from complications. Results: A total of 1815 patients underwent 1973 surgical procedures. Of these, 1447 (73.3%) were cardiopulmonary bypass procedures, and 543 (27.5%) were more complex (Category 3 and 4) procedures. Median patient age was 3.5 years (range, 1 day-20 years) and patient weight 15.0 kg (range, 900 g to 90 kg). Sixty-six patients (3.6%) died during the study period. Of the procedures in 1996, 22.7% were classified as complex compared with 29.2% of procedures in 2001. The annual surgical mortality ranged from 1.9-4.7% (P=0.20), and when mortality was adjusted for complexity of surgery, there was no significant yearly variation in the mortality rate (P=0.57). Analysis of individual surgeon's results showed no significant difference in the mortality rate by complexity of surgery performed (P=0.90). Mean ventilation times did not change significantly over time (P=0.79). The yearly incidence of significant neurological complications ranged from 0.6% to 4.5% and the incidence of arrhythmias from 4.2% to 8.0%. No difference was detected between the years. Conclusions: Stratifying complexity of surgery proved valuable in monitoring surgical outcomes and detecting differences in performance over time as large subgroups were created for analysis.

Method for a detailed measurement of image intensity nonuniformity in magnetic resonance imaging

In magnetic resonance imaging (MRI), the MR signal intensity can vary spatially and this spatial variation is usually referred to as MR intensity nonuniformity. Although the main source of intensity nonuniformity arises from B, inhomogeneity of the coil acting as a receiver and/or transmitter, geometric distortion also alters the MR signal intensity. It is useful on some occasions to have these two different sources be separately measured and analyzed. In this paper, we present a practical method for a detailed measurement of the MR intensity nonuniformity. This method is based on the same three-dimensional geometric phantom that was recently developed for a complete measurement of the geometric distortion in MR systems. In this paper, the contribution to the intensity nonuniformity from the geometric distortion can be estimated and thus, it provides a mechanism for estimation of the intensity nonuniformity that reflects solely the spatial characteristics arising from B-1. Additionally, a comprehensive scheme for characterization of the intensity nonuniformity based on the new measurement method is proposed. To demonstrate the method, the intensity nonuniformity in a 1.5 T Sonata MR system was measured and is used to illustrate the main features of the method. (c) 2005 American Association of Physicists in Medicine.

Water quality condition and trend in North Queensland waterways

The Queensland Environmental Protection Agency monitored water quality at 133 sites in North Queensland waterways between Cooktown and Bundaburg from 1992 to 2001. Condition of the waterways was rated by comparing recent data with the Queensland Water Quality Guidelines. Long-term trends were analysed using a censored regression technique that incorporates the effects of flow, temperature, seasonality and allows for long-term non-linear trends. Many sites were in good condition; those in poor condition were usually impacted by point source discharges; those in moderate condition were usually impacted by agricultural land use. There were no consistent long-term trends across the whole region. Recommendations for future programs include incorporating pressure indicators, ensuring high standards of quality assurance, including covariates such as rainfall in trend assessment and continuing programs over more than 10 years to allow detection of trends due to changes in land-use. (c) 2004 Elsevier Ltd. All rights reserved.

A discussion of cases in the 2001 RCPA-AQAP chemical pathology case report comments program

Aim: We present a descriptive analysis of the 10 case reports distributed in the Royal College of Pathologists of Australasia (RCPA) and the Australasian Association of Clinical Biochemists (AACB) Chemical Pathology Patient Report Comments Program to assess the quality of interpretative commenting in clinical biochemistry in 2001. Method: Participants were asked to comment on a given set of biochemistry results attached with brief clinical details. All responses received were translated into key phrases and graphically presented on a histogram. An expert panel was asked to evaluate the appropriateness of the key phrases and to propose a suggested composite comment. Results: While the majority of comments received were felt to be acceptable by the expert panel, some comments were felt to be inappropriate or misleading. As comments on laboratory reports may affect clinical management of patients, it is important that these comments reflect accepted practice and current guidelines. Conclusion: The Patient Report Comments Program may play an important role in continuing education and possibly in quality assurance of interpretative commenting.

A proposed scheme for comprehensive characterization of the measured geometric distortion in magnetic resonance imaging using a three-dimensional phantom

Recently, a 3-dimensional phantom that can provide a comprehensive, accurate and complete measurement of the geometric distortion in MRI has been developed. In this paper, a scheme for characterizing the measured geometric distortion using the 3-D phantom is described. In the proposed scheme, a number of quantitative measures are developed and used to characterize the geometric distortion. These measures encompass the overall and spatial aspects of the geometric distortion. Two specific types of volume of interest, rectangular parallelepipeds (including cubes) and spheres are considered in the proposed scheme. As an illustration, characterization of the geometric distortion in a Siemens 1.5T Sonata MRI system using the proposed scheme is presented. As shown, the proposed scheme provides a comprehensive assessment of the geometric distortion. The scheme can be potentially used as a standard procedure for the assessment of geometric distortion in MRI. (C) 2004 American Association of Physicists in Medicine.

Geometric distortion in clinical MRI systems - Part I: evaluation using a 3D phantom

Recently, a 3D phantom that can provide a comprehensive and accurate measurement of the geometric distortion in MRI has been developed. Using this phantom, a full assessment of the geometric distortion in a number of clinical MRI systems (GE and Siemens) has been carried out and detailed results are presented in this paper. As expected, the main source of geometric distortion in modern superconducting MRI systems arises from the gradient field nonlinearity. Significantly large distortions with maximum absolute geometric errors ranged between 10 and 25 mm within a volume of 240 x 240 x 240 mm(3) were observed when imaging with the new generation of gradient systems that employs shorter coils. By comparison, the geometric distortion was much less in the older-generation gradient systems. With the vendor's correction method, the geometric distortion measured was significantly reduced but only within the plane in which these 2D correction methods were applied. Distortion along the axis normal to the plane was, as expected, virtually unchanged. Two-dimensional correction methods are a convenient approach and in principle they are the only methods that can be applied to correct geometric distortion in a single slice or in multiple noncontiguous slices. However, these methods only provide an incomplete solution to the problem and their value can be significantly reduced if the distortion along the normal of the correction plane is not small. (C) 2004 Elsevier Inc. All rights reserved.

Sample registration of vital events with verbal autopsy: a renewed commitment to measuring and monitoring vital statistics

Registration of births, recording deaths by age, sex and cause, and calculating mortality levels and differentials are fundamental to evidence-based health policy, monitoring and evaluation. Yet few of the countries with the greatest need for these data have functioning systems to produce them despite legislation providing for the establishment and maintenance of vital registration. Sample vital registration (SVR), when applied in conjunction with validated verbal autopsy, procedures and implemented in a nationally representative sample of population clusters represents an affordable, cost-effective, and sustainable short- and medium-term solution to this problem. SVR complements other information sources by producing age-, sex-, and cause-specific mortality data that are more complete and continuous than those currently available. The tools and methods employed in an SVR system, however, are imperfect and require rigorous validation and continuous quality assurance; sampling strategies for SVR are also still evolving. Nonetheless, interest in establishing SVR is rapidly growing in Africa and Asia. Better systems for reporting and recording data on vital events will be sustainable only if developed hand-in-hand with existing health information strategies at the national and district levels; governance structures; and agendas for social research and development monitoring. If the global community wishes to have mortality measurements 5 or 10 years hence, the foundation stones of SVR must be laid today.

An industry/university collaboration to upgrade software engineering knowledge and skills in industry

This paper describes an ongoing collaboration between Boeing Australia Limited and the University of Queensland to develop and deliver an introductory course on software engineering. The aims of the course are to provide a common understanding of the nature of software engineering for all Boeing Australia's engineering staff, and to ensure they understand the practices used throughout the company. The course is designed so that it can be presented to people with varying backgrounds, such as recent software engineering graduates, systems engineers, quality assurance personnel, etc. The paper describes the structure and content of the course, and the evaluation techniques used to collect feedback from the participants and the corresponding results. The immediate feedback on the course indicates that it has been well received by the participants, but also indicates a need for more advanced courses in specific areas. The long-term feedback from participants is less positive, and the long-term feedback from the managers of the course participants indicates a need to expand on the coverage of the Boeing-specific processes and methods. (C) 2004 Elsevier Inc. All rights reserved.

Tool support for executable documentation of Java class hierarchies

While object-oriented programming offers great solutions for today's software developers, this success has created difficult problems in class documentation and testing. In Java, two tools provide assistance: Javadoc allows class interface documentation to be embedded as code comments and JUnit supports unit testing by providing assert constructs and a test framework. This paper describes JUnitDoc, an integration of Javadoc and JUnit, which provides better support for class documentation and testing. With JUnitDoc, test cases are embedded in Javadoc comments and used as both examples for documentation and test cases for quality assurance. JUnitDoc extracts the test cases for use in HTML files serving as class documentation and in JUnit drivers for class testing. To address the difficult problem of testing inheritance hierarchies, JUnitDoc provides a novel solution in the form of a parallel test hierarchy. A small controlled experiment compares the readability of JUnitDoc documentation to formal documentation written in Object-Z. Copyright (c) 2005 John Wiley & Sons, Ltd.