The estimation and improvement of the selectivity in crustacean and fish trawls

Tese de dout., Ciências e Tecnologias das Pescas, Faculdade de Ciências do Mar e do Ambiente, Univ. do Algarve, 2003

Trammel net selectivity studies in the Algarve (southern Portugal), gulf of cadiz (Spain), Basque coutry (Spain) and cyclades islands (Greece)

Trammel net fisheries were studied in four areas: the Cantabrian Sea (Basque Country, Spain), the Algarve (Southern Portugal), the Gulf of Cádiz (Spain) and the Cyclades Islands (Greece). Surveys were carried out in order to identify trammel net métiers and to characterise the gear used. Trammel nets were among the most important gears used in the small-scale fisheries, with up to 9 different métiers identified in each area. The most important métiers in the Algarve and the Gulf of Cádiz were those for cuttlefish (Sepia officinalis) and soles (Solea senegalensis, Microchirus azevia, Synaptura lusitanica). In the Cantabrian Sea, sole (Solea vulgaris), shellfish (several species) and scorpion fish (Scorpaena spp.) métiers dominated while a variety of species where targeted in the multi-species trammel net fishery in the Cyclades. In each area, experimental trammel nets of six different types (combinations of 2 large mesh outer panel sizes and 3 small mesh outer panels) corresponding to the most common métier, were constructed and fishing trials carried out on a seasonal basis (4 seasons in the Cantabrian Sea, Algarve and Cyclades and 2 in the Gulf of Cádiz) using chartered commercial fishing vessels. Overall, 271, 360, 185 and 185 km of trammel nets were fished in the experimental fishing trials in the Cantabrian Sea, Algarve, Gulf of Cádiz and Cyclades Islands respectively.

An alternative methodology for fitting selectivity curves to pre-defined distributions

A non-linear least-squares methodology for simultaneously estimating parameters of selectivity curves with a pre-defined functional form, across size classes and mesh sizes, using catch size frequency distributions, was developed based on the model of Kirkwood and Walker [Kirkwood, G.P., Walker, T.L, 1986. Gill net selectivities for gummy shark, Mustelus antarcticus Gunther, taken in south-eastern Australian waters. Aust. J. Mar. Freshw. Res. 37, 689-697] and [Wulff, A., 1986. Mathematical model for selectivity of gill nets. Arch. Fish Wiss. 37, 101-106]. Observed catches of fish of size class I in mesh m are modeled as a function of the estimated numbers of fish of that size class in the population and the corresponding selectivities. A comparison was made with the maximum likelihood methodology of [Kirkwood, G.P., Walker, T.I., 1986. Gill net selectivities for gummy shark, Mustelus antarcticus Gunther, taken in south-eastern Australian waters. Aust. J. Mar. Freshw. Res. 37, 689-697] and [Wulff, A., 1986. Mathematical model for selectivity of gill nets. Arch. Fish Wiss; 37, 101-106], using simulated catch data with known selectivity curve parameters, and two published data sets. The estimated parameters and selectivity curves were generally consistent for both methods, with smaller standard errors for parameters estimated by non-linear least-squares. The proposed methodology is a useful and accessible alternative which can be used to model selectivity in situations where the parameters of a pre-defined model can be assumed to be functions of gear size; facilitating statistical evaluation of different models and of goodness of fit. (C) 1998 Elsevier Science B.V.

Comparative fixed gear studies in the Cyclades (Aegean Sea): size selectivity of small-hook longlines and monofilament gill nets

Fishing trials with monofilament gill nets and longlines using small hooks were carried out at the same fishing grounds in Cyclades (Aegean Sea) over 1 year. Four sizes of MUSTAD brand, round bent, flatted sea hooks (Quality 2316 DT, numbers 15, 13, 12 and 11) and four mesh sizes of 22, 24, 26 and 28 turn nominal bar length monofilament gill nets were used. Significant differences in the catch size frequency distributions of the two gears were found for four out of five of the most important species caught by both the gears (Diplodus annularis, Diplodus vulgaris, Pagellus erythrinus, Scorpaena porcus and Serranus cabrilla), with longlines catching larger fish and a wider size range than gill nets. Whereas longline catch size frequency distributions for most species for the different hook sizes were generally highly overlapped, suggesting little or no differences in size selectivity, gill net catch size frequency distributions clearly showed size selection, with larger mesh sizes catching larger fish. A variety of models were fitted to the gill net data, with the lognormal providing the best fit in most cases. A maximum likelihood method was also used to estimate the parameters of the logistic model for the longline data. Because of the highly overlapped longline catch size frequency distributions parameters could only be estimated for two species. This study shows that the two static gears have different impacts in terms of size selection. This information will be useful for the more effective management of these small-scale, multi-species and multi-gear fisheries. (C) 2002 Elsevier Science B.V. All rights reserved.

Gill net selectivity for European hake Merluccius merluccius from southern Portugal: implications for fishery management

A study of European hake Merluccius merluccius gill net selectivity was undertaken off the Algarve (Southern Portugal), between 1999 and 2001. Four nominal mesh sizes (70, 80, 90 and 100 mm) were used in fishing trials and the 'share each length class catch total' (SELECT) method was used to fit gill net selectivity curves. Hake were caught in the same size range by all mesh sizes, between 17 and 65 cm total length. While most fishes were wedged, significant and similar proportions were entangled in all mesh sizes, contributing to the wide size range, and in some cases, bimodal shape of catch size frequency distributions. Insignificant numbers of undersized hake were caught, with most catches consisting of mature female fish. Catch rates decreased sharply with increasing mesh size. The bimodal model gave the best fit for hake that were wedged, with estimated modal lengths of 40.1, 46.7 and 51.0 cm for the 70, 80 and 90 mm nominal mesh sizes, respectively. The high catch per unit effort of the smallest mesh size, with most fish caught being female, together with the fact that the modal length of the fitted selectivity curve is well below the size at maturity for hake in Portuguese waters, suggests that the 80 mm nominal mesh size is more appropriate for ensuring resource sustainability.

Quantifying the roles of competing static gears: comparative selectivity of longlines and monofilament gill nets in a multi-species fishery of the Algarve (southern Portugal)

Fishing trials with monofilament gill nets and longlines using small hooks were carried out in Algarve waters (southern Portugal) over a one-year period. Four hook sizes of "Mustad" brand, round bent, flatted sea hooks (Quality 2316 DT, numbers 15, 13, 12 and 11) and four mesh sizes of 25, 30, 35 and 40 mm (bar length) monofilament gill nets were used. Commercially valuable sea breams dominated the longline catches while small pelagics were relatively more important in the gill nets. Significant differences in the catch size frequency distributions of the two gears were found for all the most important species caught by both gears (Boops boops, Diplodus bellottii, Diplodus vulgaris, Pagellus acarne, Pagellus erythrinus, Spondyiosoma cantharus, Scomber japonicus and Scorpaena notata), with longlines catching larger fish and a wider size range than nets. Whereas longline catch size frequency distributions for most species for the different hook sizes were generally highly overlapped, suggesting little or no differences in size selectivity, gill net catch size frequency distributions clearly showed size selection. A variety of models were fitted to the gill net and hook data using the SELECT method, while the parameters of the logistic model were estimated by maximum likelihood for the longline data. The bi-normal model gave the best fits for most of the species caught with gill nets, while the logistic model adequately described hook selectivity. The results of this study show that the two static gears compete for many of the same species and have different impacts in terms of catch composition and size selectivity. This information will I;e useful for the improved management of these small-scale fisheries in which many different gears compete for scarce resources.

Semi-pelagic longline selectivity for two demersal species from the Azores: the black spot sea bream (Pagellus bogaraveo) and the bluemouth rockfish (Helicolenus dactylopterus dactylopterus)

The selectivity of four hook sizes (STELL brand(1), Quality 2335, numbers 12, 9, 6 and 4) used in a semi-pelagic longline fishery was studied in the Azores. Two species were caught in sufficient numbers for modelling of selectivity: the black spot sea bream (Pagellus bogaraveo) and the bluemouth rockfish (Helicolenus dactylopterus dactylopterus). A maximum likelihood method was used to fit a versatile model which can be used to describe a wide range of selectivity curves; from bell-shaped to asymptotic. Significant differences in size selectivity between hooks were found for both species. In the case of Pagellus bogaraveo, the smallest hook (number 12) had the lowest catch rates and all hooks were characterised by logistic-type selectivity curves, with sizes at 50% selectivity of: 27.9, 30.4, and 32.8 cm for hooks numbers 12, 9 and 6, respectively. The number 9 hook was the most efficient for Helicolenus d. dactylopterus, with selectivity curves varying from strongly skewed to the right for the number 12 hook to logistic-type for the numbers 6 and 4 hooks. Sizes at 50% selectivity for this species were 16.8, 18.7, 20.7, and 22.0 cm. respectively. (C) 1999 Elsevier Science B.V. All rights reserved.

Size selectivity of diamond and square mesh cod ends for four by-catch species in the crustacean fishery off the Portuguese south coast

The effects of an increase in cod end mesh size from 55 to 60 and 70 mm and a change of mesh configuration from 55 mm diamond to 55 turn square mesh on the size selectivity of four by-catch species (the red shrimp Aristeus antennatus, the European hake Merluccius merluccius, the horse mackerel Trachurus trachurus and the blue whiting Micromesistius poutassou) commonly captured in the crustacean fishery off the Portuguese south coast, were evaluated. Selectivity parameters for blue whiting, the most abundant species in the catches, were estimated taking into account between-haul variation, while for the remaining species, captured in much lower quantities, the selectivity estimates were based on pooled data by length class for all hauls within the same cod end. Length at 50% retention, L-50, was found to increase with mesh size and with the change in mesh configuration for all the studied species. For blue whiting trawling depth and cod end catch were found to play a role in between-haul variation by increasing L-50 as well. The results suggest that an increase in the current minimum mesh size of 55-70 mm would be advisable to be compatible with the minimum landing sizes (MLSs) of 29 mm carapace length and 27 cm total length for red shrimp and hake, respectively, while it would greatly reduce the amount of discards, particularly those for blue whiting, that accounted for approximately 50% of the total catch weight. Horse mackerel was the only species for which the use of a larger mesh size would result in a significant escapement of individuals above the MLS of 15 cm. (C) 2002 Elsevier Science B.V. All rights reserved.

Size selectivity of diamond and square mesh cod ends for rose shrimp (Parapenaeus longirostris) and Norway lobster (Nephrops norvegicus) off the Portuguese south coast

The effects of an increase in cod end mesh size from 55 to 60 and 70 mm and a change of mesh configuration from diamond to square mesh on the size selectivity for rose shrimp Parapenaeus longirostris and Norway lobster Nephrops norvegicus captured off the Portuguese south coast were evaluated. The results were analysed taking into account between-haul variation in selectivity, and indicate a significant increase in L-50 for rose shrimp with an increase in mesh size or with the use of a square mesh cod end, while for Norway lobster only mesh configuration was found to affect this parameter. Two other important external variables were identified; the trawling depth and the cod end catch, which influence between-haul variation, by increasing the selection range for rose shrimp and Norway lobster, respectively. The results obtained suggest that an increase in the current minimum mesh size of 55 mm would be advisable for rose shrimp in order to respect the minimum landing size of 24 mm carapace length presently established for this species. Moreover, trawling for rose shrimp should be avoided at depths above 200 m, in order to avoid catches consisting almost exclusively of juveniles. Such an increase in mesh size would have a minor impact in terms of losses of individuals above the minimum landing size for Norway lobster and would contribute to reducing the amount of discards in this fishery. (C) 2002 Elsevier Science B.V. All rights reserved.

Size selectivity of trammel nets in southern European small-scale fisheries

Trammel net size selectivity was studied for the most important metiers in four southern European areas: the Cantabrian Sea (Atlantic, Basque Country, Spain), the Algarve (Atlantic, southern Portugal), the Gulf of Cadiz (Atlantic, Spain) and the Cyclades Islands (Mediterranean, Aegean Sea, Greece). These metiers were: cuttlefish (Sepia officinalis) and soles (Solea senegalensis, Microchirus azevia, Synaptura lusitanica) in the Algarve and the Gulf of Cadiz, sole (Solea solea) in the Cantabrian Sea and mixed fin-fish in the Cyclades. In each area, experimental trammel nets of six different types (combinations of two large outer panel mesh sizes and three small inner panel meshes) were constructed. Fishing trials were carried out on a seasonal basis (four seasons in the Cantabrian Sea, Algarve and Cyclades and two seasons in the Gulf of Cadiz) with chartered commercial fishing vessels. Overall, size selectivity was estimated for 17 out of 28 species for which sufficient data were available. Trammel nets generally caught a wide size range of the most important species, with length frequency distributions that were skewed to the right and/or bi-modal. In many cases the length frequency distributions of the different nets were highly overlapped. The Kolmogorov-Smirnov test also showed that the large outer panel meshes generally had no effect in terms of size selectivity, while the opposite was true for the small inner panel ones. Six different selectivity models (normal scale, normal location, gamma, log-normal, bi-modal and gamma semi-Wileman) were fitted to data for the most abundant species in the four areas. For fish, the bi-modal model provided the best fits for the majority of the data sets, with the uni-modal models giving poor fits in most cases. For Sepia officinalis, where trammelling or pocketing was the method of capture in 100% of the cases, the logistic model fitted by maximum likelihood was judged to be more appropriate for describing the size selective properties of the trammel nets. Our results, which are among the first ones on trammel net selectivity in European waters, will be useful for evaluating the impacts of competing gear for the socio-economically important small-scale static gear fisheries. (c) 2006 Elsevier B.V All rights reserved.

Species and size selectivity in a Portuguese multispecies artisanal long-line fishery

The species and size selectivity of long-lines using small hooks were studied off the south coast of Portugal using ''Mustad'' brand round bent, flatted sea hooks (Quality 2316 DT) numbers 15, 13, and 11 baited with razor shell clam (Ei-isis siliqua). Hook numbers 13 and 11 are 49 and 109% larger respectively than number 15 hooks in terms of overall size (maximum width x maximum length). A total of 39 900 hooks were fished in 45 sets and 35 species of fish and cephalopods were caught. As a group, 13 species of sea breams (Sparidae) dominated the catch by numbers (58%) and weight (73%). Six species of sea breams, along with the greater weever fish (Trachinus draco) accounted for 81% of the total catch by weight, with the common or white sea bream (Diplodus sargus) bring the most important (29%). Catch size distributions by hook size were, in general, highly overlapped for all species and hook size had little apparent effect on minimum size at capture. All hooks caught a wide range of sizes per species, but the catch rate (number of fish per 100 hooks) was significantly lower for the largest hook. Except for the black sea bream (Spondyliosoma cantharus), capture of illegally sized or immature fish was minimal. Small increases in average size with hook size were evident for four species: Diplodus sargus, D. vulgaris, Lithognathus mormyrus and Serranus cabrilla. No differences in size selectivity were detected for Boops boops, D. annularis, Spondyliosoma cantharus and Trachinus draco. A skew-normal model adequately described differences in size selectivity in five of six species. (C) 1996 International Council for the Exploration of the Sea

Species and size selectivity in a 'red' sea bream longline 'metier' in the Algarve (southern Portugal)

A longline 'metier' using small hooks for 'red' sea breams (Pagellus acarne and Pagellus erythrinus) in the Algarve (south of Portugal) was studied. Experimental longlining was carried out with three sizes of "Mustad" round bend, flatted, spade end Quality 2316 DT hooks (numbers 11, 13 and 15) and two types of bait: razor shell (Ensis siliqua) and mud shrimp (Upogebia pusilla). A total of 3 328 fish and at least 36 species were caught with 33 600 hooks fished in 28 longline sets. Five species of sea breams (Sparidae) accounted for 79% of the catch: Pagellus acarne, Pagellus erythrinus, Diplodus vulgaris, Spondyliosoma cantharus, and Boops boops. High catch rates of 20-30 fish per 100 hooks were made in a number of 1 200 hook longline sets, with total catch weights of 40 to more than 60 kg per set. In general, the smallest hook (number 15) had the highest catch rate. Bait type did not significantly affect the catch size distributions. Although more fish were caught with the razor shell bait, higher catch rates of 'red' sea breams were obtained with mud shrimp. Catch rates were also affected by the location of the fishing grounds and the time of the set, with the highest catch rates obtained when the longline was set within two hours before sunrise. A wide size range was caught for each species, with highly overlapped catch size frequency distributions for the three hook sizes used. Except for Spondyliosoma cantharus, few illegal-sized fish were caught, even with the smallest hook. The logistic model fitted by maximum likelihood was used to describe hook selectivity for Diplodus vulgaris, Pagellus acarne, Pagellus erythrinus, and Spondyliosoma cantharus. (C) Ifremer-Elsevier, Paris.

A comparison of monofilament gillnet and small hook longline selectivity in a multispecies artisanal fishery in the Algarve, Southern Portugal

As part of ongoing studies concerned with the small-scale fisheries of the South of Portugal, experimental fishing was carried out with monofilament gillnets and small hook longlines within the same area. Sixty-two species were caught, of which 20 were common to both gears. Pronounced differences in terms of the relative importance of different species in the catches were observed. Size selection patterns also differed, with highly overlapped hook catch distributions and few species showing evidence for size selectivity. In contrast, strong selectivity was characteristic of species which tend to be "wedged" in gillnets. Whereas smaller stretched mesh sizes (particularly 40 and 50 mm) caught significant numbers of illegal sized fish, this was minimal in the longlines. Some implications for management are discussed.

Catch composition, catch rates and size selectivity of three long-line methods in the Algarve (southern Portugal)

Three long-line methods have been studied in the Algarve: 1) small-hook long-line for inshore (less than 30 m) ‘white’ sea breams (Sparidae); 2) small-hook long-line for deeper water (40-60 m) ‘red’ sea breams; and 3) deep water (500-700 m) semi-pelagic long-line for hake Merluccius merluccius (Linnaeus, 1758). Selectivity studies were carried out with three hook sizes in the first two cases: Mustad round-bent Quality 2369 hooks, numbers 15, 13, and 11, baited with a standardsized razor-shell Ensis siliqua (Linnaeus, 1758). Four hook sizes (numbers 10, 9, 7, and 5) of Stell round-bent, eyed hooks were used in the semi-pelagic long-line selectivity study, baited with a half of a standard-sized sardine. Some factors affecting catch composition and catch rates of the small hook long-lines were also evaluated: bait, gangion length, setting time, fishing ground, and depth. Species diversity was relatively high, with 40, 36 and 27 species, respectively, in the three studies. However, the catches were dominated by a limited number of species. Catch rates (number of fish per 100 hooks) were variable (< 5 %; > 20 %), with a general decrease in catch rate with increasing hook size in all the studies. In general, the catch size distributions for the different hook sizes for each species were highly overlapping, with little or no evidence of differences in size selectivity. Hooks caught a wide size-range for each species, with few or no illegal-sized fish, in most cases. Some implications of these results for the management of multi-species, multi-gear fisheries are discussed.