The horse in early Ireland

The main object of this paper is to review the development of horse exploitation in Ireland between its introduction in the Bronze Age and the medieval period. The review considers the evidence of the use of horse for riding and traction and contrasts this with the evidence from neighbouring Britain. The change in horse size is traced as is the development of horse-related technology. The association of horse with burial ritual and the inauguration of kings is also considered.

Retroperitoneal Approach to Abdominal Aortic Aneurysm Repair Preserves Splanchnic Perfusion as Measured by Gastric Tonometry

Background: We investigated if minimizing bowel manipulation and mesenteric traction using the retroperitoneal approach in open abdominal aortic aneurysm (AAA) repair preserves splanchnic perfusion, as measured by gastric tonometry, and reduces the systemic inflammatory response and dysfunction of the various organs.

Retroperitoneal Repair of Abdominal Aortic Aneurysm Reduces Bowel Dysfunction

Objective: To assess the effect of intestinal manipulation and mesenteric traction on gastro-intestinal function and postoperative recovery in patients undergoing abdominal aortic aneurysm (AAA) repair. Methods: Thirty-five patients undergoing AAA repair were randomised into 3 groups. Group I (n = II) had repair via retroperitoneal approach while Group II (n = 12) and Group III (n = 12) were repaired via transperitoneal approach with bowel packed within the peritoneal cavity or exteriorised in a bowel bag respectively. Gastric emptying was measured pre-operatively (day 0), day 1 and day 3 using paracetamol absorption test (PAT) and area under curve (P-AUC) was calculated. Intestinal permeability was measured using the Lactulose-Mannitol test. Results: Aneurysm size, operation time and PAT (on day 0 and day 3) were similar in the three groups. On day 1, the P-AUC was significantly higher in Group I, when compared with Group II and Group III (P = .02). Resumption of diet was also significantly earlier in Group I as compared to Group II and Group III. The intestinal permeability was significantly increased in Group II and Group III at day 1 when compared with day 0, with no significant increase in Group I. Retroperitoneal repair was also associated with significantly shorter intensive care unit (P = .04) and hospital stay (P = .047), when compared with the combined transperitoneal repair group (Group II and III). Conclusion: Retroperitoneal AAA repair minimises intestinal dysfunction and may lead to quicker patient recovery when compared to transperitoneal repair.

Effects of particle plasticity characteristics on local interface stress in particle reinforced composite during uniaxial tension

For elastoplastic particle reinforced metal matrix composites, failure may originate from interface debonding between the particles and the matrix, both elastoplastic and matrix fracture near the interface. To calculate the stress and strain distribution in these regions, a single reinforcing particle axisymmetric unit cell model is used in this article. The nodes at the interface of the particle and the matrix are tied. The development of interfacial decohesion is not modelled. Finite element modelling is used, to reveal the effects of particle strain hardening rate, yield stress and elastic modulus on the interfacial traction vector (or stress vector), interface deformation and the stress distribution within the unit cell, when the composite is under uniaxial tension. The results show that the stress distribution and the interface deformation are sensitive to the strain hardening rate and the yield stress of the particle. With increasing particle strain hardening rate and yield stress, the interfacial traction vector and internal stress distribution vary in larger ranges, the maximum interfacial traction vector and the maximum internal stress both increase, while the interface deformation decreases. In contrast, the particle elastic modulus has little effect on the interfacial traction vector, internal stress and interface deformation.

Committing to Effective Climate Governance in Northern Ireland: A Defining Test of Devolution

This is the second of a two-part analysis exploring the interaction between UK devolution and governance of the national low carbon transition. It argues that devolution shaped the national climate governance regime created by the Climate Change Act 2008, but will itself be tested and even altered as the traction of the low carbon imperative intensifies. This dynamic is explored in the specific context of the UK’s most devolved region. The first article argued that devolution facilitated and arguably forced Northern Ireland’s devolved administration to give a highly qualified and potentially illusory consent to the regional application of the UK Act. The second article argues that making a more effective commitment to climate governance will be a defining test of its devolution arrangements but will require constitutional arrangements designed for conflict resolution to mature. Failure to do so will have important implications for the UK’s putative ‘national’ low carbon transition and the longer-term viability of devolution in the region.

Les deux André et le concept de la durée: André Chamson et André Malraux dans le même combat pour les valeurs spirituelles.

Les vies et les carrières d’André Chamson et d’André Malraux se ressemblent par de multiples aspects. Contemporains, ils se connaissaient bien, menaient souvent les mêmes combats, souffraient des mêmes préoccupations, Mais c’est surtout par rapport à l’esprit qui les animait, en tant que grandes personnalités marquantes du XXe siècle, que d’intéressants parallèles peuvent être établis entre eux, que nous pouvons avec profit examiner les valeurs universelles et spirituelles qu’ils promouvaient, valeurs emblématiques pour tant de penseurs, d’acteurs, et d’écrivains de ce siècle. Ainsi pourrions-nous par ailleurs interroger et même évaluer la solidité, la résistance et le potentiel de telles valeurs pour le siècle à venir.

Numerical analysis of stiffener runout sections

The recent trend of incorporating more composite material in primary aircraft structures has highlighted the vulnerability of stiffened aerostructures to through-thickness stresses, which may lead to delamination and debonding at the skin-stiffener interface, leading to collapse. Stiffener runout regions are particularly susceptible to this problem and cannot be avoided due to the necessity to terminate stiffeners at rib intersections or at cutouts, interrupting the stiffener load path. In this paper, experimental tests relating to two different stiffener runout specimens are presented and the failure modes of both specimens are discussed in detail. A thinner-skinned specimen showed sudden and unstable crack propagation, while a thicker-skinned specimen showed initially unstable but subsequent stable crack growth. Detailed finite element models of the two specimens are developed, and it is shown how such models can explain and predict the behaviour and failure mode of stiffener runouts. The models contain continuum shell elements to model the skin and stiffener, while cohesive elements using a traction-separation law are placed at the skin-stiffener interface to effectively model the debonding which promotes structural failure.

Internal Limiting Membrane Peeling in Vitreo-retinal Surgery

Peeling the internal limiting membrane of the retina has become a very common procedure performed by vitreo-retinal surgeons. The combination of new microsurgical instrumentation with the availability of different dyes to stain this thin and transparent membrane has facilitated the performance of internal limiting membrane peeling, reducing the time and trauma associated with this maneuver. Internal limiting membrane peeling has been used to treat a variety of retinal pathologies, including full-thickness macular hole, epiretinal membrane, macular edema, vitreomacular traction syndrome, and Terson syndrome, among others. Although it appears that peeling the internal limiting membrane in these retinal conditions may be associated with better anatomical and visual outcomes following surgery, further evidence through randomized controlled clinical trials is still needed to guide the vitreo-retinal surgeon on the appropriate use of this surgical maneuver. © 2008 Elsevier Inc. All rights reserved.

Transpupillary thermotherapy for choroidal melanoma:Tumor control and visual results in 100 consecutive cases

Objective: The authors evaluated the results of primary transpupillary thermotherapy for choroidal melanoma in 100 cases. Design: Prospective nonrandomized analysis of treatment method. Participants: One hundred patients with choroidal melanoma were studied. Main Outcome Measures: Tumor response, ocular side effects, and visual results. Results: Of 100 consecutive patients with choroidal melanoma treated with transpupillary thermotherapy, the mean tumor basal diameter was 7.1 mm and tumor thickness was 2.8 mm. The tumor margin touched the optic disc in 34 eyes (34%) and was beneath the fovea in 42 eyes (42%). Documented growth was present in 64 eyes (64%), and known clinical risks for growth were present in all of the remaining 36 eyes (36%), with an average of 4 of 5 statistical risk factors for growth per tumor. After a mean of three treatment sessions and 14 months of follow-up, the mean tumor thickness was reduced to 1.4 mm. Treatment was successful in 94 eyes (94%) and failed in 6 eyes (6%). Three patients with amelanotic tumors showed no initial response to thermotherapy, but subsequent intravenous indocyanine green administration during thermotherapy resulted in improved heat absorption and tumor regression to a flat scar. The six eyes classified as treatment failures included four eyes with tumors that showed partial or no response to thermotherapy, thus requiring plaque radiotherapy or enucleation, and two eyes with recurrence, subsequently controlled with additional thermotherapy. After treatment, the visual acuity was the same (within 1 line) or better than the pretreatment visual acuity in 58 eyes (58%) and worse in 42 eyes (42%). The main reasons for poorer vision included treatment through the foveola for subfoveal tumor (25 eyes), retinal traction (10 eyes), retinal vascular obstruction (5 eyes), optic disc edema (1 eye), and unrelated ocular ischemia (1 eye). Temporal location (versus nasal and superior, P = 0.02) and greater distance from the optic disc (P = 0.04) were risks for retinal traction. Conclusions: Transpupillary thermotherapy may be an effective treatment for small posterior choroidal melanoma, especially those near the optic disc and fovea. Despite satisfactory local tumor control, ocular side effects can result in decreased vision. Longer follow- up will be necessary to assess the impact of thermotherapy on ultimate local tumor control and metastatic disease.

Localised gamma irradiation and experimental intraocular proliferation

A controlled study was undertaken to assess the effect of gamma irradiation on post-traumatic intraocular cellular proliferation. A standard perforating injury in the posterior segment of the rabbit eye was used to induce intraocular cellular proliferation and vitreo-retinal membrane formation. The site of injury was irradiated with an ophthalmic Cobalt60 applicator which provided a continuous source of gamma rays. Non-irradiated eyes developed traction retinal detachments associated with post-traumatic vitreo-retinal membranes. Irradiated eyes developed attenuated membranes or atrophic retinal scars, with the retina remaining attached. The membranes in non-irradiated eyes were highly cellular with abundant collagen, while irradiated membranes had fewer cells within a sparse collagen matrix. The episcleral fibroblasts, on autoradiographic studies appeared to be the main source of the cells that formed the proliferating tissue in both non-irradiated and irradiated eyes. In irradiated eyes both the inflammatory response and division of fibroblasts were delayed and reduced.

Study of localized damage in composite laminates using micro-macro approach

A robust multiscale scheme referred to as micro–macro method has been developed for the prediction of localized damage in fiber reinforced composites and implemented in a finite element framework. The micro–macro method is based on the idea of partial homogenization of a structure. In this method, the microstructural details are included in a small region of interest in the structure and the rest is modeled as a homogeneous continuum. The solution to the microstructural fields is then obtained on solving the two different domains, simultaneously. This method accurately predicts local stress fields in stress concentration regions and is computationally efficient as compared with the solution of a full scale microstructural model. This scheme has been applied to obtain localized damage at high and low stress zones of a V-notched rail shear specimen. The prominent damage mechanisms under shear loading, namely, matrix cracking and interfacial debonding, have been modeled using Mohr–Coulomb plasticity and traction separation law, respectively. The average stress at the notch has been found to be 44% higher than the average stresses away from the notch for a 90 N shear load. This stress rise is a direct outcome of the geometry of the notch.

Central-Tapped Node Linked Modular Fault-Tolerance Topology for SRM Applications

Electric vehicles (EVs) and hybrid electric vehicles (HEVs) can reduce greenhouse gas emissions while switched reluctance motor (SRM) is one of the promising motor for such applications. This paper presents a novel SRM fault-diagnosis and fault-tolerance operation solution. Based on the traditional asymmetric half-bridge topology for the SRM driving, the central tapped winding of the SRM in modular half-bridge configuration are introduced to provide fault-diagnosis and fault-tolerance functions, which are set idle in normal conditions. The fault diagnosis can be achieved by detecting the characteristic of the excitation and demagnetization currents. An SRM fault-tolerance operation strategy is also realized by the proposed topology, which compensates for the missing phase torque under the open-circuit fault, and reduces the unbalanced phase current under the short-circuit fault due to the uncontrolled faulty phase. Furthermore, the current sensor placement strategy is also discussed to give two placement methods for low cost or modular structure. Simulation results in MATLAB/Simulink and experiments on a 750-W SRM validate the effectiveness of the proposed strategy, which may have significant implications and improve the reliability of EVs/HEVs.

Improving composite damage modelling through automatic placement of cohesive elements

Numerous experimental studies of damage in composite laminates have shown that intralaminar (in-plane) matrix cracks lead to interlaminar delamination (out-of-plane) at ply interfaces. The smearing of in-plane cracks over a volume, as a consequence of the use of continuum damage mechanics, does not always effectively capture the full extent of the interaction between the two failure mechanisms. A more accurate representation is obtained by adopting a discrete crack approach via the use of cohesive elements, for both in-plane and out-of-plane damage. The difficulty with cohesive elements is that their location must be determined a priori in order to generate the model; while ideally the position of the crack migration, and more generally the propagation path, should be obtained as part of the problem’s solution. With the aim of enhancing current modelling capabilities with truly predictive capabilities, a concept of automatic insertion of interface elements is utilized. The consideration of a simple traction criterion in relation to material strength, evaluated at each node of the model (or of the regions of the model where it is estimated cracks might form), allows for the determination of initial crack location and subsequent propagation by the insertion of cohesive elements during the course of the analysis. Several experimental results are modelled using the commercial package ABAQUS/Standard with an automatic insertion subroutine developed in this work, and the results are presented to demonstrate the capabilities of this technique.

Personalised and Precision Medicine in Cancer Clinical Trials: Panacea for Progress or Pandora's Box?

Cancer clinical trials have been one of the key foundations for significant advances in oncology. However, there is a clear recognition within the academic, care delivery and pharmaceutical/biotech communities that our current model of clinical trial discovery and development is no longer fit for purpose. Delivering transformative cancer care should increasingly be our mantra, rather than maintaining the status quo of, at best, the often miniscule incremental benefits that are observed with many current clinical trials. As we enter the era of precision medicine for personalised cancer care (precision and personalised medicine), it is important that we capture and utilise our greater understanding of the biology of disease to drive innovative approaches in clinical trial design and implementation that can lead to a step change in cancer care delivery. A number of advances have been practice changing (e.g. imatinib mesylate in chronic myeloid leukaemia, Herceptin in erb-B2-positive breast cancer), and increasingly we are seeing the promise of a number of newer approaches, particularly in diseases like lung cancer and melanoma. Targeting immune checkpoints has recently yielded some highly promising results. New algorithms that maximise the effectiveness of clinical trials, through for example a multi-stage, multi-arm type design are increasingly gaining traction. However, our enthusiasm for the undoubted advances that have been achieved are being tempered by a realisation that these new approaches may have significant cost implications. This article will address these competing issues, mainly from a European perspective, highlight the problems and challenges to healthcare systems and suggest potential solutions that will ensure that the cost/value rubicon is addressed in a way that allows stakeholders to work together to deliver optimal cost-effective cancer care, the benefits of which can be transferred directly to our patients.