Experimental Design to Optimize High-Volume Ash Grout in the Presence of Welan Gum and Superplasticizer

Applications such as soil, rock and oil-well grouting all require enormous amounts of cement and are good examples of areas where a high volume of fly ash could partially replace cement to produce low-cost, environmentally safe and durable concrete. There is an increasing need to identify the rheological properties of cement grout using a simple test to determine the fluidity, and other properties of underwater grouts such as washout resistance and compressive strength. This paper presents statistical models developed using a fractorial design which was carried out to model the influence of key parameters on properties affecting the performance of underwater grout. Such responses of fluidity included mini-slump and flow time measured by Marsh cone, washout resistance, unit weight and compressive strength. The models are valid for mixes with 0.40 to 0.60 water-to-cementitious materials ratio, 0.02 to 0.08% of anti-washout admixture, by mass of binder, and 0.6 to 1.8% of superplasticizer, by mass of cementitious materials. The grout was made with 50% of pulverized-fuel ash replacement, by mass ofcementitious materials. Also presented are the derived models that enable the identification of underlying primary factors and their interactions that influence the modelled responses of underwater cement grout. Such parameters can be useful to reduce the test protocol needed for proportioning of underwater cement grout. This paper highlighted the influence of W/CM and dosage of antiwashout admixture and superplasticizer on fluidity, washout resistance and compressive strength and attempted also to demonstrate the usefulness of the models to improve understanding of trade-offs between parameters.

Detecting the effects of diversity on measures of ecosystem function: experimental design, null models and empirical observations

Here we present a novel experimental approach to examine the relationship between diversity and ecosystem Function. We develop four null predictive models, with which to differentiate between the 'sampling effect' - the chance inclusion of a highly productive species, and 'species complementarity' - the complementary use of resources by species that differ in their niche or resource use. We investigate the effects of manipulating species and functional richness on ecosystem function in marine benthic system and using empirical data from our own experiments we illustrate the application of these models.

FACTORIAL EXPERIMENTAL-DESIGN FOR CONCRETE DURABILITY RESEARCH

It is widely accepted that concrete designed to perform satisfactorily in adverse environmental conditions must have a high cement content and a low water-cement ratio. In addition, in order to enhance its durability, many types of additive and admixture such as super-plasticizers, fly ash, silica fume, ggbfs, etc., have been used in the past. However, a close study of the published literature indicates that the effect of mix variables on the durability and the interaction between the various ingredients are not fully understood. Some of these apparent contradictions are due to the limitations in the design of the experimental programme. For instance, it is evident that relatively higher concentrations of aggregates increase the tortuosity of the flow path and hence reduce the permeability, which results in an improvement in the durability. Therefore, an increase in cement content without a proportional decrease in water-cement ratio may reduce the durability. In such cases, the interactive effects of factors can be established by resorting to a properly designed experimental programme, such as the factorial experimental design.

Influence of the experimental design of gene expression studies on the inference of gene regulatory networks: environmental factors

The inference of gene regulatory networks gained within recent years a considerable interest in the biology and biomedical community. The purpose of this paper is to investigate the influence that environmental conditions can exhibit on the inference performance of network inference algorithms. Specifically, we study five network inference methods, Aracne, BC3NET, CLR, C3NET and MRNET, and compare the results for three different conditions: (I) observational gene expression data: normal environmental condition, (II) interventional gene expression data: growth in rich media, (III) interventional gene expression data: normal environmental condition interrupted by a positive spike-in stimulation. Overall, we find that different statistical inference methods lead to comparable, but condition-specific results. Further, our results suggest that non-steady-state data enhance the inferability of regulatory networks.

Experimental design and batch experiments for optimization of Cr(VI) removal from aqueous solutions by hydrous cerium oxide nanoparticles

Hydrous cerium oxide (HCO) was synthesized by intercalation of solutions of cerium(III) nitrate and sodium hydroxide and evaluated as an adsorbent for the removal of hexavalent chromium from aqueous solutions. Simple batch experiments and a 2⁵ factorial experimental design were employed to screen the variables affecting Cr(VI) removal efficiency. The effects of the process variables; solution pH, initial Cr(VI) concentration, temperature, adsorbent dose and ionic strength were examined. Using the experimental results, a linear mathematical model representing the influence of the different variables and their interactions was obtained. Analysis of variance (ANOVA) demonstrated that Cr(VI) adsorption significantly increases with decreased solution pH, initial concentration and amount of adsorbent used (dose), but slightly decreased with an increase in temperature and ionic strength. The optimization study indicates 99% as the maximum removal at pH 2, 20 °C, 1.923 mM of metal concentration and a sorbent dose of 4 g/dm³. At these optimal conditions, Langmuir, Freundlich and Redlich–Peterson isotherm models were obtained. The maximum adsorption capacity of Cr(VI) adsorbed by HCO was 0.828 mmol/g, calculated by the Langmuir isotherm model. Desorption of chromium indicated that the HCO adsorbent can be regenerated using NaOH solution 0.1 M (up to 85%). The adsorption interactions between the surface sites of HCO and the Cr(VI) ions were found to be a combined effect of both anion exchange and surface complexation with the formation of an inner-sphere complex.

Meta-analysis of the influence of experimental design on effect size in peer tutoring outcomes in elementary, middle and high school settings.

A meta-analysis was undertaken on a form of cooperative learning, peer tutoring. The effects of experimental design on outcomes were explored, as measured by Effect Size (ES). 185 studies were included in the meta-analysis. Highest ES were reported for quasi-experimental studies. ES reduced as experimental design moved from single pre-test factor matched, to multiple-factor matched randomized controlled trials. ES reduced when designs used standardised, rather than self-designed measures, The implications for future meta-analyses and research in cooperative learning are explored.

The influence of experimental design on the magnitude of the effect size -peer tutoring for elementary, middle and high school settings: A meta-analysis

A meta-analysis was undertaken on a form of cooperative learning, peer tutoring. The effects of experimental design on outcomes were explored, as measured by Effect Size (ES). Forty three articles with 82 effect size studies were included in the meta-analysis. Highest ES were reported for quasi-experimental studies. ES reduced as experimental design moved from single pre-test factor matched, to multiple-factor matched randomized controlled trials. ES reduced when designs used standardised, rather than self-designed measures. The implications for future meta-analyses and research in cooperative learning are explored.

Mental Health and Morbidity of Caregivers and Co-Residents of individuals with Dementia: A Quasi-Experimental Design

Objectives: To determine if providing informal care to a co-resident with dementia symptoms places an additional risk on the likelihood of poor mental health or mortality compared to co-resident non-caregivers.
Design: A quasi-experimental design of caregiving and non-caregiving co-residents of individuals with dementia symptoms, providing a natural comparator for the additive effects of caregiving on top of living with an individual with dementia symptoms. 
Methods: Census records, providing information on household structure, intensity of caregiving, presence of dementia symptoms and self-reported mental health, were linked to mortality records over the following 33 months. Multi-level regression models were constructed to determine the risk of poor mental health and death in co-resident caregivers of individuals with dementia symptoms compared to co-resident non-caregivers, adjusting for the clustering of individuals within households.
Results: The cohort consisted of 10,982 co-residents (55.1% caregivers), with 12.1% of non-caregivers reporting poor mental health compared to 8.4% of intense caregivers (>20 hours of care per week). During follow-up the cohort experienced 560 deaths (245 to caregivers). Overall, caregiving co-residents were at no greater risk of poor mental health but had lower mortality risk than non-caregiving co-residents (ORadj=0.93, 95% CI 0.79, 1.10 and ORadj=0.67, 95% CI 0.56, 0.81, respectively); this lower mortality risk was also seen amongst the most intensive caregivers (ORadj=0.65, 95% CI 0.53, 0.79).
Conclusion: Caregiving poses no additional risk to mental health over and above the risk associated with merely living with someone with dementia, and is associated with a lower mortality risk compared to non-caregiving co-residents.

Factorial Design of Cement Slurries Containing Limestone Powder for Self-Consolidating Slurry-Infiltrated Fiber Concrete

Slurries with high penetrability for production of Self-consolidating Slurry Infiltrated Fiber Concrete (SIFCON) were investigated in this study. Factorial experimental design was adopted in this investigation to assess the combined effects of five independent variables on mini-slump test, plate cohesion meter, induced bleeding test, J-fiber penetration test and compressive strength at 7 and 28 days. The independent variables investigated were the proportions of limestone powder (LSP) and sand, the dosages of superplasticiser (SP) and viscosity agent (VA), and water-to-binder ratio (w/b). A two-level fractional factorial statistical method was used to model the influence of key parameters on properties affecting the behaviour of fresh cement slurry and compressive strength. The models are valid for mixes with 10 to 50% LSP as replacement of cement, 0.02 to 0.06% VA by mass of cement, 0.6 to 1.2% SP and 50 to 150% sand (% mass of binder) and 0.42 to 0.48 w/b. The influences of LSP, SP, VA, sand and W/B were characterised and analysed using polynomial regression which identifies the primary factors and their interactions on the measured properties. Mathematical polynomials were developed for mini-slump, plate cohesion meter, J-fiber penetration test, induced bleeding and compressive strength as functions of LSP, SP, VA, sand and w/b. The estimated results of mini-slump, induced bleeding test and compressive strength from the derived models are compared with results obtained from previously proposed models that were developed for cement paste. The proposed response models of the self-consolidating SIFCON offer useful information regarding the mix optimization to secure a highly penetration of slurry with low compressive strength

An investigation of the influence of process and formulation variables on mechanical properties of high shear granules using design of experiment

Being able to predict the properties of granules from the knowledge of the process and formulation variables is what most industries are striving for. This research uses experimental design to investigate the effect of process variables and formulation variables on mechanical properties of pharmaceutical granules manufactured from a classical blend of lactose and starch using hydroxypropyl cellulose (HPC) as the binder. The process parameters investigated were granulation time and impeller speed whilst the formulation variables were starch-to-lactose ratio and HPC concentration. The granule properties investigated include granule packing coefficient and granule strength. The effect of some components of the formulation on mechanical properties would also depend on the process variables used in granulation process. This implies that by subjecting the same formulation to different process conditions results in products with different properties. © 2012 Elsevier B.V. All rights reserved.

Physical Activity Loyalty Cards for Behavior Change:A Quasi-Experimental Study

Background: Financial incentives have been advocated by the UK and U.S. governments to encourage adoption of healthy lifestyles. However, evidence to support the use of incentives for changing physical activity (PA) behavior is sparse.
Purpose:To investigate the effectiveness of?nancial incentives to increase PA in adults in the workplace.
Design: Two-arm quasi-experimental design.
Setting/participants: Employees (n¼406) in a workplace setting in Belfast, Northern Ireland, UK.
Intervention: Using a loyalty card to collect points and earn rewards, participants (n¼199) in the Incentive Group monitored their PA levels and received ?nancial incentives (retail vouchers) for minutes of PA completed over the course of a 12-week intervention period. Participants (n¼207) in the comparison group used their loyalty card to self-monitor their PA levels but were not able to earn points or obtain incentives (No Incentive Group).
Main outcome measures:The primary outcome was minutes of PA objectively measured using a novel PA tracking system at baseline (April 2011); Week 6 (June 2011); and Week 12 (July 2011).
Other outcomes, including a self-report measure of PA, were collected at baseline, Week 12, and 6 months (October 2011). Data were analyzed in June 2012.
Results: No signi?cant differences between groups were found for primary or secondary outcomes at the 12-week and 6-month assessments. Participants in the Incentive Group recorded 17.52 minutes of PA/week (95% CI¼12.49, 22.56) compared to 16.63 minutes/week (95% CI¼11.76, 21.51) in the No Incentive Group at Week 12 (p¼0.59). At 6 months, participants in the Incentive Group recorded 26.18 minutes of PA/week (95% CI¼20.06, 32.29) compared to 24.00 minutes/week (95% CI¼17.45, 30.54) in the No Incentive Group (p¼0.45).
Conclusions: Financial incentives did not encourage participants to undertake more PA than selfmonitoring PA. This study contributes to the evidence base and has important implications for increasing participation in physical activity and fostering links with the business sector. (Am J Prev Med 2013;45(1):56–63) © 2013 American Journal of Preventive Medicine

Predator cue studies reveal strong trait-mediated effects in communities despite variation in experimental designs

Nonconsumptive or trait-mediated effects of predators on their prey often outweigh density-mediated interactions where predators consume prey. For instance, predator presence can alter prey behaviour, physiology, morphology and/or development. Despite a burgeoning literature, our ability to identify general patterns in prey behavioural responses may be influenced by the inconsistent methodologies of predator cue experiments used to assess trait-mediated effects. We therefore conducted a meta-analysis to highlight variables (e.g. water type, predator husbandry, exposure time) that may influence invertebrate prey's behavioural responses to fish predator cues. This revealed that changes in prey activity and refuge use were remarkably consistent overall, despite wide differences in experimental methodologies. Our meta-analysis shows that invertebrates altered their behaviour to predator cues of both fish that were fed the focal invertebrate and those that were fed other prey types, which suggests that invertebrates were not responding to specific diet information in the fish cues. Invertebrates also altered their behaviour regardless of predator cue addition regimes and fish satiation levels. Cue intensity and exposure time did not have significant effects on invertebrate behaviour. We also highlight that potentially confounding factors, such as parasitism, were rarely recorded in sufficient detail to assess the magnitude of their effects. By examining the likelihood of detecting trait-mediated effects under large variations in experimental design, our study demonstrates that trait-mediated effects are likely to have pervasive and powerful influences in nature.

How many bad apples are in a bunch? An experimental investigation of perceived pesticide residue risks

Subjective risks of having contaminated apples elicited via the Exchangeability Method (EM) are examined in this study. In particular, as the experimental design allows us to investigate the validity of elicited risk measures, we examine the magnitude of differences between valid and invalid observations. In addition, using an econometric model, we also explore the effect of consumers’ socioeconomic status and attitudes toward food safety on subjects’ perceptions of pesticide residues in apples. Results suggest first, that consumers do not expect an increase in the number of apples containing only one pesticide residue, but, rather, in the number of those apples with traces of multiple residues. Second, we find that valid subjective risk measures do not significantly diverge from invalid ones, indicative of little effect of internal validity on the actual magnitude of subjective risks. Finally, we show that subjective risks depend on age, education, a subject’s ties to the apple industry, and consumer association membership.