Rhodium carbenoid O-H insertion reactions with phenols; a facile method for the synthesis of trialkyl 2-aryloxyphosphonoacetates and their use in the preparation of 2-aryloxy-3-phenylpropanoates

Substituted phenols undergo a facile Rh carbenoid-mediated O-H insertion reaction with (EtO)2P(O)C(:N2)CO2R (I; R = Et, Me) to give 44-86% 2-aryloxyphosphonoacetates II (R1 = e.g., H, 4-Me, 4-Cl, 2-OH, 4-PhCH2O). Phenols contg. strongly electron withdrawing groups, bulky ortho-substituents or certain ortho-heteroatom substituents show reduced or variable yields. Catechol affords a mono-adduct which cyclizes to lactate III. Aniline inserts preferentially and exclusively over phenol in a competition reaction with I (R = Et) to give (EtO)2P(O)CH(NHPh)CO2Et. II are versatile intermediates in a prepn. of 2-aryloxy-3-phenylpropenoates IV by Wadsworth-Emmons reaction with benzaldehydes R2C6H4CHO (R2 = PhCH2O, 2-Cl, H). Dissolving Mg metal redn. provides a mild method for the conversion of propenoates IV into the corresponding propanoates.

Competing O-H insertion and  -elimination in rhodium carbenoid reactions; synthesis of 2-alkoxy-3-arylpropanoates

Rhodium(II) carboxylate catalyzed decompn. of diazo esters 3 (shown as I) and PhCH2C(CO2Et)N2 4 in the presence of alcs. or water results in formation of 2-alkoxy- or 2-hydroxy-3-arylpropanoates, resp., by O-H insertion in competition with cinnamates by elimination; the ratio of insertion to elimination is dramatically affected by the carboxylate ligand on rhodium. Use of methanol-d as the alc. confirms that the alkene does not arise by elimination from the initial alkoxyester product.

Evaluation of Random Delay Insertion against DPA on FPGAs

Side-channel attacks (SCA) threaten electronic cryptographic devices and can be carried out by monitoring the physical characteristics of security circuits. Differential Power Analysis (DPA) is one the most widely studied side-channel attacks. Numerous countermeasure techniques, such as Random Delay Insertion (RDI), have been proposed to reduce the risk of DPA attacks against cryptographic devices. The RDI technique was first proposed for microprocessors but it was shown to be unsuccessful when implemented on smartcards as it was vulnerable to a variant of the DPA attack known as the Sliding-Window DPA attack.Previous research by the authors investigated the use of the RDI countermeasure for Field Programmable Gate Array (FPGA) based cryptographic devices. A split-RDI technique wasproposed to improve the security of the RDI countermeasure. A set of critical parameters wasalso proposed that could be utilized in the design stage to optimize a security algorithm designwith RDI in terms of area, speed and power. The authors also showed that RDI is an efficientcountermeasure technique on FPGA in comparison to other countermeasures.In this article, a new RDI logic design is proposed that can be used to cost-efficiently implementRDI on FPGA devices. Sliding-Window DPA and realignment attacks, which were shown to beeffective against RDI implemented on smartcard devices, are performed on the improved RDIFPGA implementation. We demonstrate that these attacks are unsuccessful and we also proposea realignment technique that can be used to demonstrate the weakness of RDI implementations.

Low Insertion Loss Substrate Integrated Waveguide Quasi–Elliptic Filters for V- Band Wireless Personal Area Network Applications

Novel V-band substrate integrated waveguide (SIW) filters have been presented. Design procedures for the filters synthesis and mechanisms providing quasi-elliptic response have been explained. The insertion loss of the filters has been measured below 2 dB with microstrip-to-SIW transitions being included.

Thought insertion: Abnormal sense of thought agency or thought endorsement?

The standard approach to the core phenomenology of thought insertion characterizes it in terms of a normal sense of thought ownership coupled with an abnormal sense of thought agency. Recently, Fernández (2010) has argued that there are crucial problems with this approach and has proposed instead that what goes wrong fundamentally in such a phenomenology is a sense of thought commitment, characterized in terms of thought endorsement. In this paper, we argue that even though Fernández raises new issues that enrich the topic, his proposal cannot rival the version of the standard approach we shall defend.

Characterization of IS2112, a new insertion sequence from Rhodococcus, and its relationship with mobile elements belonging to the IS110 family

A new insertion sequence (IS2112) was identified in the genome of the 1-haloalkane-utilizing bacterium Rhodococcus rhodochrous NCIMB 13064. The insertion element is 1415 bp long, does not contain terminal inverted repeats, and is not flanked by directly repeated sequences. IS2112 belongs to the IS110 family of transposable elements, and forms a separate subfamily, along with IS116, Two copies of IS2112 were found in R, rhodochrous NCIMB 13064 and one, two or three copies of a similar sequence were detected in five other 1-haloalkane-degrading Rhodococcus strains. There were no sequences homologous to IS2112 found in the l-haloalkane-degrading 'Pseudomonas pavonaceae' 170 and Rhodococcus sp, HA1 or in several Rhodococcus strains which do not utilize haloalkanes, IS2112 was originally found in plasmid pRTL1 of R. rhodochrous NCIMB 13064 which harbours genes encoding utilization of l-haloalkanes, and was located 5 kbp upstream of the haloalkane dehalogenase gene (dhaA), Although the second copy of IS2112 in strain NCIMB 13064 was also present on the pRTL1 plasmid, these sequences do not apparently comprise a single composite transposon encoding haloalkane utilization. An analysis of derivatives of NCIMB 13064 revealed that IS2112 was involved in genome rearrangements. IS2112 appeared to change its location as a result of transposition and as a result of other rearrangements of the NCIMB 13064 genome.

The N-terminal region of the Escherichia coli WecA (Rfe) protein, containing three predicted transmembrane helices, is required for function but not for membrane insertion

The correct site for translation initiation for Escherichia coli WecA (Rfe), presumably involved in catalyzing the transfer of N-acetylglucosamine 1-phosphate to undecaprenylphosphate, was determined by using its FLAG-tagged derivatives. The N-terminal region containing three predicted transmembrane helices was found to be necessary for function but not for membrane localization of this protein.

Automatic Insertion of Cohesive Elements for Delamination

Composite damage modelling with cohesive elements has initially been limited to the analysis of interface damage or delamination. However, their use is also being extended to the analysis of inplane tensile failure arising from matrix or fibre fracture. These interface elements are typically placed at locations where failure is likely to occur, which infers a certain a priori knowledge of the crack propagation path(s). In the case of a crack jump for example, the location of the jump is usually not obvious, and the simulation would require the placement of cohesive elements at all element faces. A better option, presented here, is to determine the potential location of cohesive elements and insert them during the analysis. The aim of this work is to enable the determination of the crack path, as part of the solution process. A subroutine has been developed and implemented in the commercial finite element package ABAQUS/Standard[1] in order to automatically insert cohesive elements within a pristine model, on the basis of the analysis of the current stress field. Results for the prediction of delamination are presented in this paper.

Finite element analysis of ultrasonic insertion of SiC fibre in aluminium alloy 6061

In this work, a computational framework has been proposed to successfully simulate the fibre embedding using ultrasonic consolidation process. The main components of the proposed computational approach are a developed constitutive model and a friction model which are especially suitable for the condition of ultrasonic process. The effect of different process parameters, such as velocity of sonotrode, displacement amplitude of ultrasonic vibration and applied loads are studied. The presented work especially focuses on the quality of the developed weld and the fibre coverage due to the plastic flow around the fibre. The areas of maximum plastic flow predicted by the simulation are confirmed by the EBSD microstructural studies. © 2011 Inderscience Enterprises Ltd.

Mode of insertion of the abductor hallucis muscle in human feet and its arterial supply

The abductor hallucis flap is commonly used as a pedicled flap (distally or proximally based) in the management of ankle, heel, and mid-foot lesions, where it is ideally used for closing defects. This study investigates the anatomical details of this muscle regarding its various forms of insertion and its arterial supply in 15 cadaveric feet. Four types of insertion could be distinguished: type A, insertion at the proximal phalanx of the big toe (46.7%); type B, insertion by two slips into the base of the proximal phalanx and the sesamoid bone (33.3%); type C, insertion at the sesamoid bone (6.7%); And type D, the insertion is divided into superficial tendinous and deep fleshy parts which are attached to the base of the proximal phalanx and to the metatarsophalangeal joint capsule of the big toe, respectively (13.3%). As regards the arterial supply, three patterns were noticed: pattern A (40%) where the medial plantar artery (MPA) is divided into superficial and deep branches that supplied the muscle; pattern B (53.3%) where the MPA failed to produce a deep branch but instead continued as the superficial branch supplying the two ends of the muscle; and pattern C (6.6%) where the MPA continued as a deep branch supplying the muscle. A superficial branch of MPA provided a branch to the abductor hallucis muscle from its proximal part. In two specimens (13.3%), the lateral plantar artery shared in the supply of the most proximal part of the muscle. These results can be useful in determining the appropriate flap design based on the abductor hallucis type of insertion and the pattern of its arterial supply in the patients.