Optimizing The Nasal Allergen Challenge Model For The Study Of Allergic Rhinitis

Background The Allergic Rhinitis Clinical Investigator Collaborative (AR-CIC) uses a Nasal Allergen Challenge (NAC) model to study the pathophysiology of AR and provides proof of concept for novel therapeutics. The NAC model needs to ensure optimal participant qualification, allergen challenge, clinical symptoms capture and biological samples collection. Repeatability of the protocol is key to ensuring unbiased efficacy analysis of novel therapeutics. The effect of allergen challenge on IL-33 gene expression and its relation to IL1RL1 receptor and cytokine secretion was investigated. Methods Several iterations of the NAC protocol was tested, comparing variations of qualifying criteria based on the Total Nasal Symptom Score (TNSS) and Peak Nasal Inspiratory Flow (PNIF). The lowest allergen concentration was delivered and TNSS and PNIF recorded 15 minutes later. Participants qualified if the particular criteria for the protocol were met, otherwise the next higher allergen concentration (4-fold increase), was administered until the targets were reached. Participants returned for a NAC visit and received varying allergen challenge concentrations depending on the protocol, TNSS/PNIF were recorded at 15 minutes, 30 minutes, 1 hour, and hourly up to 12 hours, a 24 hour time point was added in later iterations. Repeatability was evaluated using a 3-4week interval between screening, NAC1, and NAC2 visits. Various biomarker samples were collected. Results A combined TNSS and PNIF criterion was more successful in qualifying participants. The cumulative allergen challenge (CAC) protocol proved more reliable in producing a robust clinical and biomarker response. Repeatability of the CAC protocol was achieved with a 3-week interval between visits, on a clinical and biological basis. IL-33 cytokine is an important biomarker in initiating the inflammatory response in AR in humans. IL-33 and IL1RL1 expression might employ a negative feedback mechanism in human nasal epithelial cells. Comparing the clinical and biological response to ragweed vs cat allergen challenge, proved the CAC protocol’s suitability for use employing different allergens. Conclusion The AR-CIC’s CAC protocol is an effective method of studying AR, capable of generating measurable and repeatable clinical and biomarker responses, enabling better understanding of AR pathophysiology and ensuring that any change would be purely due to medication under investigation in a clinical trial setting.

Cavity-Enhanced Photoacoustic Detection Using Acoustic and Fiber-Optic Resonators

A wineglass has been used as an acoustic resonator to enhance the photoacoustic signal generated by laser excitation of absorbing dyes in solution. The amplitude of the acoustic signal was recorded using a fiber-optic transducer based on a Fabry-Pérot cavity attached to the rim of the wineglass. The optical and acoustic properties of the setup were characterized, and it was used to quantify the concentration of phosphomolybdenum blue and methyl red solutions. Detection limits of 1.2 ppm and 8 muM were obtained, respectively.

Absorption Measurements in Liquid Core Waveguides Using Cavity

Short liquid core waveguides (LCWs) were included into a fiber-loop cavity ring-down absorption spectrometer to reduce the detection limit over, both, single pass absorption in a LCW and cavityenhanced absorption using a conventional fiber-loop cavity. LCWs of 5 and 10 cm length were interfaced with a pressure-flow system and a multimode fiber-loop cavity using concave fiber lenses with matching numerical apertures and diameters. Two red dyes, Allura Red AC and Congo Red, were detected with a 532 nm pulsed laser at a 5 nM limit of detection in a detection volume of less than 1 μL, corresponding to a minimal detectable absorbance of less than 4 × 10−4 cm−1 and a minimal detectable change in absorption cross section, σmin = Vdet × ε × CLOD, of about 14 μm2 (Allura Red AC) and 37 μm2 (Congo Red).

Loss Determination in Microsphere Resonators by Phase-Shift Cavity Ring-Down Measurements

The optical loss of whispering gallery modes of resonantly excited microresonator spheres is determined by optical lifetime measurements. The phase-shift cavity ring-down technique is used to extract ring-down times and optical loss from the difference in amplitude modulation phase between the light entering the microresonator and light scattered from the microresonator. In addition, the phase lag of the light exiting the waveguide, which was used to couple light into the resonator, was measured. The intensity and phase measurements were fully described by a model that assumed interference of the cavity modes with the light propagating in the waveguide.

Tight-Binding Approximations in 1D and 2D Coupled-Cavity Photonic Crystal Structures

Light confinement and controlling an optical field has numerous applications in the field of telecommunications for optical signals processing. When the wavelength of the electromagnetic field is on the order of the period of a photonic microstructure, the field undergoes reflection, refraction, and coherent scattering. This produces photonic bandgaps, forbidden frequency regions or spectral stop bands where light cannot exist. Dielectric perturbations that break the perfect periodicity of these structures produce what is analogous to an impurity state in the bandgap of a semiconductor. The defect modes that exist at discrete frequencies within the photonic bandgap are spatially localized about the cavity-defects in the photonic crystal. In this thesis the properties of two tight-binding approximations (TBAs) are investigated in one-dimensional and two-dimensional coupled-cavity photonic crystal structures We require an efficient and simple approach that ensures the continuity of the electromagnetic field across dielectric interfaces in complex structures. In this thesis we develop \textrm{E} -- and \textrm{D} --TBAs to calculate the modes in finite 1D and 2D two-defect coupled-cavity photonic crystal structures. In the \textrm{E} -- and \textrm{D} --TBAs we expand the coupled-cavity \overrightarrow{E} --modes in terms of the individual \overrightarrow{E} -- and \overrightarrow{D} --modes, respectively. We investigate the dependence of the defect modes, their frequencies and quality factors on the relative placement of the defects in the photonic crystal structures. We then elucidate the differences between the two TBA formulations, and describe the conditions under which these formulations may be more robust when encountering a dielectric perturbation. Our 1D analysis showed that the 1D modes were sensitive to the structure geometry. The antisymmetric \textrm{D} mode amplitudes show that the \textrm{D} --TBA did not capture the correct (tangential \overrightarrow{E} --field) boundary conditions. However, the \textrm{D} --TBA did not yield significantly poorer results compared to the \textrm{E} --TBA. Our 2D analysis reveals that the \textrm{E} -- and \textrm{D} --TBAs produced nearly identical mode profiles for every structure. Plots of the relative difference between the \textrm{E} and \textrm{D} mode amplitudes show that the \textrm{D} --TBA did capture the correct (normal \overrightarrow{E} --field) boundary conditions. We found that the 2D TBA CC mode calculations were 125-150 times faster than an FDTD calculation for the same two-defect PCS. Notwithstanding this efficiency, the appropriateness of either TBA was found to depend on the geometry of the structure and the mode(s), i.e. whether or not the mode has a large normal or tangential component.

Discerning the sub-phonemic identity of pre-nasal /æ/ in British Columbia English

There are two features of /æ/ in British Columbia (BC) English that are widely attested in the literature: it is undergoing retraction and lowering and it is sensitive to the influence of certain following consonants. The present study aims to utilize both features to evaluate the phonological status of /æ/ before nasal consonants in BC English by examining the progression of sound change and the phonemic organization of /æ/ in different environments. Specifically, production and perception results are taken together to evaluate the phonetic position of pre-nasal /æ/ relative to other environments. These results are interpreted within a modular feedforward architecture of phonology to establish the phonological (allophonic) and phonetic (shallowphonic) rules that govern the internal relationships between the subphonemic elements of /æ/ in BC English. Further, the findings of this study provide evidence for the allophone being the target of sound change, rather than the phoneme.