The importance of gestation process dynamics

Principal Topic In this paper we seek to highlight the important intermediate role that the gestation process plays in entrepreneurship by examining its key antecedents and its consequences for new venture emergence. In doing so we take a behavioural perspective and argue that it is not only what a nascent venture is, but what it does (Katz & Gartner, 1988; Shane & Delmar, 2004; Reynolds, 2007) and when it does it during start-up (Reynolds & Miller, 1992; Lichtenstein, Carter, Dooley & Gartner, 2007) that is important. To extend an analogy from biological development, what we suggest is that the way a new venture is nurtured is just as fundamental as its nature. Much prior research has focused on the nature of new ventures and attempted to attribute variations in outcomes directly to the impact resource endowments and investments have. While there is little doubt that venture resource attributes such as human capital, and specifically prior entrepreneurial experience (Alsos & Kolvereid, 1998), access to social (Davidsson & Honig, 2003) and financial capital have an influence. Resource attributes themselves are distal from successful start-up endeavours and remain inanimate if not for the actions of the nascent venture. The key contribution we make is to shift focus from whether or not actions are taken, but when these actions happen and how that is situated in the overall gestation process. Thus, we suggest that it is gestation process dynamics, or when gestation actions occur, that is more proximal to venture outcomes and we focus on this. Recently scholars have highlighted the complexity that exists in the start-up or gestation process, be it temporal or contextual (Liao, Welsch & Tan, 2005; Lichtenstein et al. 2007). There is great variation in how long a start-up process might take (Reynolds & Miller, 1992), some processes require less action than others (Carter, Gartner & Reynolds, 1996), and the overall intensity of the start-up effort is also deemed important (Reynolds, 2007). And, despite some evidence that particular activities are more influential than others (Delmar & Shane, 2003), the order in which events may happen is, until now, largely indeterminate as regard its influence on success (Liao & Welsch, 2008). We suggest that it is this complexity of the intervening gestation process that attenuates the effect of resource endowment and has resulted in mixed findings in previous research. Thus, in order to reduce complexity we shall take a holistic view of the gestation process and argue that it is its’ dynamic properties that determine nascent venture attempt outcomes. Importantly, we acknowledge that particular gestation processes of themselves would not guarantee successful start-up, but it is more correctly the fit between the process dynamics and the ventures attributes (Davidsson, 2005) that is influential. So we aim to examine process dynamics by comparing sub-groups of venture types by resource attributes. Thus, as an initial step toward unpacking the complexity of the gestation process, this paper aims to establish the importance of its role as an intermediary between attributes of the nascent venture and the emergence of that venture. Here, we make a contribution by empirically examining gestation process dynamics and their fit with venture attributes. We do this by firstly, examining that nature of the influence that venture attributes such as human and social capital have on the dynamics of the gestation process, and secondly by investigating the effect that gestation process dynamics have on venture creation outcomes. Methodology and Propositions In order to explore the importance that gestation processes dynamics have in nascent entrepreneurship we conduct an empirical study of ventures start-ups. Data is drawn from a screened random sample of 625 Australian nascent business ventures prior to them achieving consistent outcomes in the market. This data was collected during 2007/8 and 2008/9 as part of the Comprehensive Australian Study of Entrepreneurial Emergence (CAUSEE) project (Davidsson et al., 2008). CAUSEE is a longitudinal panel study conducted over four years, sourcing information from annually administered telephone surveys. Importantly for our study, this methodology allows for the capture and tracking of active nascent venture creation as it happens, thus reducing hindsight and selection biases. In addition, improved tests of causality may be made given that outcome measures are temporally removed from preceding events. The data analysed in this paper represents the first two of these four years, and for the first time has access to follow-up outcome measures for these venture attempts: where 260 were successful, 126 were abandoned, and 191 are still in progress. With regards to venture attributes as gestation process antecedents, we examine specific human capital measured as successful prior experience in entrepreneurship, and direct social capital of the venture as ‘team start-ups’. In assessing gestation process dynamics we follow Lichtenstein et al. (2007) to suggest that the rate, concentration and timing of gestation activities may be used to summarise the complexity dynamics of that process. In addition, we extend this set of measures to include the interaction of discovery and exploitation by way of changes made to the venture idea. Those ventures with successful prior experience or those who conduct symbiotic parallel start-up attempts may be able to, or be forced to, leave their gestation action until later and still derive a successful outcome. In addition access to direct social capital may provide the support upon which the venture may draw in order to persevere in the face of adversity, turning a seemingly futile start-up attempt into a success. On the other hand prior experience may engender the foresight to terminate a venture attempt early should it be seen to be going nowhere. The temporal nature of these conjectures highlight the importance that process dynamics play and will be examined in this research Statistical models are developed to examine gestation process dynamics. We use multivariate general linear modelling to analyse how human and social capital factors influence gestation process dynamics. In turn, we use event history models and stratified Cox regression to assess the influence that gestation process dynamics have on venture outcomes. Results and Implications What entrepreneurs do is of interest to both scholars and practitioners’ alike. Thus the results of this research are important since they focus on nascent behaviour and its outcomes. While venture attributes themselves may be influential this is of little actionable assistance to practitioners. For example it is unhelpful to say to the prospective first time entrepreneur “you’ll be more successful if you have lots of prior experience in firm start-ups”. This research attempts to close this relevance gap by addressing what gestation behaviours might be appropriate, when actions best be focused, and most importantly in what circumstances. Further, we make a contribution to the entrepreneurship literature, examining the role that gestation process dynamics play in outcomes, by specifically attributing these to the nature of the venture itself. This extension is to the best of our knowledge new to the research field.

Generalising unitary time evolution

In this third Quantum Interaction (QI) meeting it is time to examine our failures. One of the weakest elements of QI as a field, arises in its continuing lack of models displaying proper evolutionary dynamics. This paper presents an overview of the modern generalised approach to the derivation of time evolution equations in physics, showing how the notion of symmetry is essential to the extraction of operators in quantum theory. The form that symmetry might take in non-physical models is explored, with a number of viable avenues identified.

Development of a biaxial compression device for biological samples : preliminary experimental results for a closed cell foam

Biological tissues are subjected to complex loading states in vivo and in order to define constitutive equations that effectively simulate their mechanical behaviour under these loads, it is necessary to obtain data on the tissue's response to multiaxial loading. Single axis and shear testing of biological tissues is often carried out, but biaxial testing is less common. We sought to design and commission a biaxial compression testing device, capable of obtaining repeatable data for biological samples. The apparatus comprised a sealed stainless steel pressure vessel specifically designed such that a state of hydrostatic compression could be created on the test specimen while simultaneously unloading the sample along one axis with an equilibrating tensile pressure. Thus a state of equibiaxial compression was created perpendicular to the long axis of a rectangular sample. For the purpose of calibration and commissioning of the vessel, rectangular samples of closed cell ethylene vinyl acetate (EVA) foam were tested. Each sample was subjected to repeated loading, and nine separate biaxial experiments were carried out to a maximum pressure of 204 kPa (30 psi), with a relaxation time of two hours between them. Calibration testing demonstrated the force applied to the samples had a maximum error of 0.026 N (0.423% of maximum applied force). Under repeated loading, the foam sample demonstrated lower stiffness during the first load cycle. Following this cycle, an increased stiffness, repeatable response was observed with successive loading. While the experimental protocol was developed for EVA foam, preliminary results on this material suggest that this device may be capable of providing test data for biological tissue samples. The load response of the foam was characteristic of closed cell foams, with consolidation during the early loading cycles, then a repeatable load-displacement response upon repeated loading. The repeatability of the test results demonstrated the ability of the test device to provide reproducible test data and the low experimental error in the force demonstrated the reliability of the test data.

Development and application of Palygorskite porous ceramsite in a biological aerated filter (BAF)

Novel filter Palygorskite porous ceramsite (PC) was prepared using Palygorskite clay, poreforming material sawdust, and sodium silicate with a mass ratio of 10:2:1 after sintering at 700°C for 180 min. PC was characterized with X-ray diffraction, X-ray fluorescence, scanning electron microscopy, elemental, and porosimetry. PC had a total porosity of 67% and specific surface area of 61 m2/g. In order to assess the usefulness of PC as a medium for biological aerated filters (BAF), PC and (commercially available ceramsite) CAC were used to treat wastewater city in two laboratory-scale upflow BAFs. The results showed that the reactor containing PC was more efficient than the reactor containing CAC in terms of total organic carbon (TOC), ammonia nitrogen (NH3-N), and the removal of total nitrogen (TN) and phosphorus (P). This system was found to be more efficient at water temperatures ranging from 20 to 26°C, an air–water (A/W) ratio of 3:1, dissolved oxygen concentration >4.00 mg/L, and hydraulic retention time (HRT) ranging from 0.5 to 7 h. The interconnected porous structure produced for PC was suitable for microbial growth, and primarily protozoan and metazoan organisms were found in the biofilm. Microorganism growth also showed that, under the same submerged culture conditions, the biological mass in PC was significantly higher than in CAC (34.1 and 2.2 mg TN/g, respectively). In this way, PC media can be considered suitable for the use as a medium in novel biological aerated filters for the simultaneous removal of nitrogen and phosphorus.

Ex vivo investigation of novel wound healing therapies and development of a 3-D human skin equivalent wound model

It has previously been found that complexes comprised of vitronectin and growth factors (VN:GF) enhance keratinocyte protein synthesis and migration. More specifically, these complexes have been shown to significantly enhance the migration of dermal keratinocytes derived from human skin. In view of this, it was thought that these complexes may hold potential as a novel therapy for healing chronic wounds. However, there was no evidence indicating that the VN:GF complexes would retain their effect on keratinocytes in the presence of chronic wound fluid. The studies in this thesis demonstrate for the first time that the VN:GF complexes not only stimulate proliferation and migration of keratinocytes, but also these effects are maintained in the presence of chronic wound fluid in a 2-dimensional (2-D) cell culture model. Whilst the 2-D culture system provided insights into how the cells might respond to the VN:GF complexes, this investigative approach is not ideal as skin is a 3-dimensional (3-D) tissue. In view of this, a 3-D human skin equivalent (HSE) model, which reflects more closely the in vivo environment, was used to test the VN:GF complexes on epidermopoiesis. These studies revealed that the VN:GF complexes enable keratinocytes to migrate, proliferate and differentiate on a de-epidermalised dermis (DED), ultimately forming a fully stratified epidermis. In addition, fibroblasts were seeded on DED and shown to migrate into the DED in the presence of the VN:GF complexes and hyaluronic acid, another important biological factor in the wound healing cascade. This HSE model was then further developed to enable studies examining the potential of the VN:GF complexes in epidermal wound healing. Specifically, a reproducible partial-thickness HSE wound model was created in fully-defined media and monitored as it healed. In this situation, the VN:GF complexes were shown to significantly enhance keratinocyte migration and proliferation, as well as differentiation. This model was also subsequently utilized to assess the wound healing potential of a synthetic fibrin-like gel that had previously been demonstrated to bind growth factors. Of note, keratinocyte re-epitheliasation was shown to be markedly improved in the presence of this 3-D matrix, highlighting its future potential for use as a delivery vehicle for the VN:GF complexes. Furthermore, this synthetic fibrin-like gel was injected into a 4 mm diameter full-thickness wound created in the HSE, both keratinocytes and fibroblasts were shown to migrate into this gel, as revealed by immunofluorescence. Interestingly, keratinocyte migration into this matrix was found to be dependent upon the presence of the fibroblasts. Taken together, these data indicate that reproducible wounds, as created in the HSEs, provide a relevant ex vivo tool to assess potential wound healing therapies. Moreover, the models will decrease our reliance on animals for scientific experimentation. Additionally, it is clear that these models will significantly assist in the development of novel treatments, such as the VN:GF complexes and the synthetic fibrin-like gel described herein, ultimately facilitating their clinical trial in the treatment of chronic wounds.

Development of a hemispherical compound Eye for egomotion estimation

Biological inspiration has produced some successful solutions for estimation of self motion from visual information. In this paper we present the construction of a unique new camera, inspired by the compound eye of insects. The hemispherical nature of the compound eye has some intrinsically valuable properties in producing optical flow fields that are suitable for egomotion estimation in six degrees of freedom. The camera that we present has the added advantage of being lightweight and low cost, making it suitable for a range of mobile robot applications. We present some initial results that show the effectiveness of our egomotion estimation algorithm and the image capture capability of the hemispherical camera.

Scaffold development using 3D printing with a starch-based polymer

Rapid prototyping (RP) techniques have been utilised by tissue engineers to produce three-dimensional (3D) porous scaffolds. RP technologies allow the design and fabrication of complex scaffold geometries with a fully interconnected pore network. Three-dimensional printing (3DP) technique was used to fabricate scaffolds with a novel micro- and macro-architecture. In this study, a unique blend of starch-based polymer powders (cornstarch, dextran and gelatin) was developed for the 3DP process. Cylindrical scaffolds of five different designs were fabricated and post-processed to enhance the mechanical and chemical properties. The scaffold properties were characterised by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), porosity analysis and compression tests

Biological monitoring of occupational exposure to polycyclic aromatic hydrocarbons in prebake smelting

In 1984, the International Agency for Research on Cancer determined that working in the primary aluminium production process was associated with exposure to certain polycyclic aromatic hydrocarbons (PAHs) that are probably carcinogenic to humans. Key sources of PAH exposure within the occupational environment of a prebake aluminium smelter are processes associated with use of coal-tar pitch. Despite the potential for exposure via inhalation, ingestion and dermal adsorption, to date occupational exposure limits exist only for airborne contaminants. This study, based at a prebake aluminium smelter in Queensland, Australia, compares exposures of workers who came in contact with PAHs from coal-tar pitch in the smelter’s anode plant (n = 69) and cell-reconstruction area (n = 28), and a non-production control group (n = 17). Literature relevant to PAH exposures in industry and methods of monitoring and assessing occupational hazards associated with these compounds are reviewed, and methods relevant to PAH exposure are discussed in the context of the study site. The study utilises air monitoring of PAHs to quantify exposure via the inhalation route and biological monitoring of 1-hydroxypyrene (1-OHP) in urine of workers to assess total body burden from all routes of entry. Exposures determined for similar exposure groups, sampled over three years, are compared with published occupational PAH exposure limits and/or guidelines. Results of paired personal air monitoring samples and samples collected for 1-OHP in urine monitoring do not correlate. Predictive ability of the benzene-soluble fraction (BSF) in personal air monitoring in relation to the 1-OHP levels in urine is poor (adjusted R2 < 1%) even after adjustment for potential confounders of smoking status and use of personal protective equipment. For static air BSF levels in the anode plant, the median was 0.023 mg/m3 (range 0.002–0.250), almost twice as high as in the cell-reconstruction area (median = 0.013 mg/m3, range 0.003–0.154). In contrast, median BSF personal exposure in the anode plant was 0.036 mg/m3 (range 0.003–0.563), significantly lower than the median measured in the reconstruction area (0.054 mg/m3, range 0.003–0.371) (p = 0.041). The observation that median 1-OHP levels in urine were significantly higher in the anode plant than in the reconstruction area (6.62 µmol/mol creatinine, range 0.09–33.44 and 0.17 µmol/mol creatinine, range 0.001–2.47, respectively) parallels the static air measurements of BSF rather than the personal air monitoring results (p < 0.001). Results of air measurements and biological monitoring show that tasks associated with paste mixing and anode forming in the forming area of the anode plant resulted in higher PAH exposure than tasks in the non-forming areas; median 1-OHP levels in urine from workers in the forming area (14.20 µmol/mol creatinine, range 2.02–33.44) were almost four times higher than those obtained from workers in the non-forming area (4.11 µmol/mol creatinine, range 0.09–26.99; p < 0.001). Results justify use of biological monitoring as an important adjunct to existing measures of PAH exposure in the aluminium industry. Although monitoring of 1-OHP in urine may not be an accurate measure of biological effect on an individual, it is a better indicator of total PAH exposure than BSF in air. In January 2005, interim study results prompted a plant management decision to modify control measures to reduce skin exposure. Comparison of 1-OHP in urine from workers pre- and post-modifications showed substantial downward trends. Exposure via the dermal route was identified as a contributor to overall dose. Reduction in 1-OHP urine concentrations achieved by reducing skin exposure demonstrate the importance of exposure via this alternative pathway. Finally, control measures are recommended to ameliorate risk associated with PAH exposure in the primary aluminium production process, and suggestions for future research include development of methods capable of more specifically monitoring carcinogenic constituents of PAH mixtures, such as benzo[a]pyrene.

Healthy sexual development : a multidisciplinary framework for research

A group of Australian researchers from a range of disciplines involved in studying children's sexual development developed a framework for researching healthy sexual development that was acceptable to all disciplines involved. The 15 domains identified were: freedom from unwanted activity; an understanding of consent; education about biological aspects; understanding of safety; relationship skills; agency; lifelong learning; resilience; open communication; sexual development should not be “aggressive, coercive or joyless;” self-acceptance; awareness and acceptance that sex is pleasurable; understanding of parental and societal values; awareness of public/private boundaries; and being competent in mediated sexuality.

Axial magnetic bearing development for the BiVACOR Rotary BiVAD/TAH

A suspension system for the BiVACOR biventricular assist device (BiVAD) has been developed and tested. The device features two semi-open centrifugal impellers mounted on a common rotating hub. Flow balancing is achieved through the movement of the rotor in the axial direction. The rotor is suspended in the pump casings by an active magnetic suspension system in the axial direction and a passive hydrodynamic bearing in the radial direction. This paper investigates the axial movement capacity of themagnetic bearing system and the power consumption at various operating points. The force capacity of the passive hydrodynamic bearing is investigated using a viscous glycerol solution. Axial rotor movement in the range of ±0.15 mm is confirmed and power consumption is under 15.5 W. The journal bearing is shown to stabilize the rotor in the radial direction at the required operating speed. Magnetic levitation is a viable suspension technique for the impeller of an artificial heart to improve device lifetime and reduce blood damage.

Bribie Island groundwater resources : challenges in development of conceptual and numerical models

Groundwater is a major resource on Bribie Island and its sustainable management is essential to maintain the natural and modified eco-systems, as well as the human population and the integrity of the island as a sand mass. An effective numerical model is essential to enable predictions, and to test various water use and rainfall/climate scenarios. Such a numerical model must, however, be based on a representative conceptual hydrogeological model to allow incorporation of realistic controls and processes. Here we discuss the various hydrogeological models and parameters, and hydrological properties of the materials forming the island. We discuss the hydrological processes and how they can be incorporated into these models, in an integrated manner. Processes include recharge, discharge to wetlands and along the coastline, abstraction, evapotranspiration and potential seawater intrusion. The types and distributions of groundwater bores and monitoring are considered, as are scenarios for groundwater supply abstraction. Different types of numerical models and their applicability are also considered

Sustainable development as a meta-context for engineering education

At the end of the first decade of the twenty-first century, there is unprecedented awareness of the need for a transformation in development, to meet the needs of the present while also preserving the ability of future generations to meet their own needs. However, within engineering, educators still tend to regard such development as an ‘aspect’ of engineering rather than an overarching meta-context, with ad hoc and highly variable references to topics. Furthermore, within a milieu of interpretations there can appear to be conflicting needs for achieving sustainable development, which can be confusing for students and educators alike. Different articulations of sustainable development can create dilemmas around conflicting needs for designers and researchers, at the level of specific designs and (sub-) disciplinary analysis. Hence sustainability issues need to be addressed at a meta-level using a whole of system approach, so that decisions regarding these dilemmas can be made. With this appreciation, and in light of curriculum renewal challenges that also exist in engineering education, this paper considers how educators might take the next step to move from sustainable development being an interesting ‘aspect’ of the curriculum, to sustainable development as a meta-context for curriculum renewal. It is concluded that capacity building for such strategic considerations is critical in engineering education.

In vitro breeding strategies in the development of Australian native plants

Plant tissue culture is a technique that exploits the ability of many plant cells to revert to a meristematic state. Although originally developed for botanical research, plant tissue culture has now evolved into important commercial practices and has become a significant research tool in agriculture, horticulture and in many other areas of plant sciences. Plant tissue culture is the sterile culture of plant cells, tissues, or organs under aseptic conditions leading to cell multiplication or regeneration or organs and whole plants. The steps required to develop reliable systems for plant regeneration and their application in plant biotechnology are reviewed in countless books. Some of the major landmarks in the evolution of in vitro techniques are summarised in Table 5.1. In this chapter the current applications of this technology to agriculture, horticulture, forestry and plant breeding are briefly described with specific examples from Australian plants when applicable.