军队医学科技人员身心健康与影响因素的研究

To study the relationship between mental-physical health and coping behavior,job stress and job motivation in medical laboratory scientists and technicians. A cross-section survey was conducted,using the anxiety rating scale(SAS), depression rating scale(SDS), coping behavior rating scale,self-rating subhealth scale,self-rating stress scale,and self-rating job motivation scale among 289 medical laboratory scientists and technicians with analysis of ANOVA and Regression. The study was carried out in three steps:step1 is to analyze the general situation of the mental-physical health.Step 2 is to analyze the features of the main influencial facotors.Step 3 is to study the influence of the relative factors on mental-physical health.The following are the results: 1.The anxiety and depression scores of the medical researchers and technicians were 30±6 and 37±8 respectively,both significantly lower than those of the national norm（34±6 and 42±11 respectively,both P<0.01）,which are of significant difference. The depression score of the associate chief technician was 42±7, significantly higher than those of the medical researchers and technicians with any other professional titles (all P<0.05）, and the anxiety score of the associate chief technicians was 32±7, significantly higher than that of the research fellows（28±4, P<0.05），with no significant difference to the score of the medical researchers and technicians with other professional titles. The depression score,anxiety score and the subhealth score of the age group of 36～49 were 39±9,31±7 and 32±9 respectively, both higher than that of the age group of 20～35 （36±8,29±6 and 29±7 respectively,both P<0.05）,while there is much diference among other age groups. And the subhealth status has nothing to do with marital status,education background and professional titles. 2.The coping behaviors,job stress and motivation of the military medical laboratory scientists and technicians. 1）Coping behaviors:The seeking help score of the associate chief technicians was 2.8±0.5,not significantly different from that of the associate research fellows（2.8±0.5）,but significantly lower than those of the medical researchers and technicians with other professional titles(all P<0.01),and whose self-blame score was higher than that of the research fellows,which is of significant difference.The self-blame score and the imagination score of the associate research fellows were 2.0±0.5 and 2.4±0.5 respectively, significantly higher than that of the research fellows(1.6±0.4, 2.1±0.4,both P<0.01). The seeking help score of the females was 3.1±0.5, significantly higher than that of the males(2.9±0.5, both P<0.01),and the solving problem score was 3.4±0.6,significantly lower than the male(3.6±0.7, both P<0.01).There is no any significant difference in coping behaviors among researchers and technicians of different marital status,education background and age groups. 2)Job stress: The score of job stress of the age group of 35~49 and 50~60 were 23±8 and 25±6 respectively,significantly higher than that of the 20~35(21±7,both P<0.05). There is no any significant difference in job stress among researchers and technicians of different marital status,gender,professional titles and education background. 3)The score of meeting personal desire for reputation and interests of the males was 19.6±5.4，significantly higher than that of the females(18.4±5.0, both P<0.05), while there is no significant difference in job motivation among researchers and technicians of different titles,education,age and marital status. 3.The relationship of the mental-physical health of the military medical laboratory scientists and technicians with their coping behaviors,job stress and motivations 1) Coping behaviors:Regression analysis showed that, the best predictors of subhealth were anxiety,depression and escaping (β=-0.40,β=0.23, β=0.14, both P<0.01).the best predictors of anxiety and depression were active coping behaviors and negative coping behaviors (β=-0.40,β=0.40, both P<0.01).The moderate(rational) coping behaviors is the best predictor only of anxiety and of significant difference. 2)job stress : Regression analysis demonstrated that anxiety,depression,job stress 2 and job stress 4 are the best predictor for subhealth;job stress 12 is the best retro-predictor for depression; job stress 3 and 8 are the best predictor for depression;and job stress 2 and 9 are the best predictor for anxiety ,which are of significant difference. 3)Motivation:Regression analysis demonstrated that depression is the best predictor for subhealth while motivation itself doesn't predict subhealth;with respect to the specific contents of motivation,"probing unknown rules and making contributions to the human society "is the best retro-predictor for depression and has nothing to do with anxiety prediction. 4) The combined influences of coping behaviors,job stress and motivations: Regression analysis showed that, the best predictors for subhealth were anxiety,depression and job stress(β=0.41,β=0.24, β=0.19, both P<0.01).the best predictors for anxiety and depression were active coping behaviors and negative coping behaviors (β=-0.40,β=0.40, both P<0.01).The moderate(rational) coping behaviors is the best predictor only for anxiety and of significant difference. CONCLUSIONS: Regression analysis showed that the best predictors for anxiety and depression were active coping behaviors and negative coping behaviors, the best predictors for subhealth were anxiety,depression and job stress.Coping behaviors, job stress and motivations have significant influences on the mental-physical health of the military medical researchers and and technicians. Among them,coping behavior is the most important factor while job stress and motivation follow. Seeking help more often,less self-blame ,imagination and job stress could help release the anxiety, depression and improve the subhealth of the medical researchers and technicians. The findings of this study indicate we should address the physical and mental health of the military laboratory researchers and technicians.

A Review of Studies on the Mechanical Behavior of Microcellular Plastics

对微孔泡沫塑料力学行为的研究文献进行了综述,简单介绍了微孔泡沫塑料的制备和表征方法,重点介绍了微孔泡沫塑料力学性能的研究工作,其中也包括作者近期在该领域的一些工作。这些工作主要讨论了微孔泡沫塑料的压缩、拉伸、冲击、疲劳和黏弹性效应。最后：给出了对该领域工作的一些讨论和展望。

Size-dependent inelastic behavior of particle-reinforced metal-matrix composites

The strengthening behavior of particle-reinforced metal-matrix composites (MMCp) is primarily attributed to the dislocation strengthening effect and the load-transfer effect. To account for these two effects in a unified way, a new hybrid approach is developed in this paper by incorporating the geometrically necessary dislocation strengthening effect into the incremental micromechanical scheme. By making use of this hybrid approach, the particle-size-dependent inelastic deformation behavior of MMCp is given. Some comparisons with the available experimental results demonstrate that the present approach is satisfactory.

Effects of Microstructural Heterogeneity on the Spallation Behavior of Materials

It is of utmost importance to understand the spallation behaviour of heterogeneous materials. In this paper, a driven nonlinear threshold model with stress fluctuation is presented to study the effects of microstructural heterogeneity on continuum damage evolution. The spallation behavior of heterogeneity material is analyzed with this model. The heterogeniety of mesoscopic units is characterized in terms of Weibull modulus m of strength distibution and stress fluctuation parameter k. At high stress, the maximum damage increases with m; while at low stress, the maximum damage decreases. In addition, for low stress, severe stress fluctuation causes higher damage; while for high stress, causes lower damage.

Indentation Creep Behavior in Ce-Based Bulk Metallic Glasses at Room Temperature

The room temperature creep behaviors of Ce-based bulk metallic glasses were examined by the use of nanoindentation. The creep rate and creep rate sensitivity of Ce-based BMGs were derived from indentation creep curves. The low creep rate sensitivity of Ce-based BMGs indicates that the room temperature creep is dominated by localized shear flow. The experimental creep curves can be described by a generalized Kelvin model. Furthermore, the creep retardation spectrum is calculated for the Ce-based metallic glasses. The results showed that creep retardation spectrum consists of two relatively separated peaks with the well defined characteristic relaxation times.

Dynamic behavior of a cylindrical crack in a functionally graded interlayer under torsional loading

In this paper the problem of a cylindrical crack located in a functionally graded material (FGM) interlayer between two coaxial elastic dissimilar homogeneous cylinders and subjected to a torsional impact loading is considered. The shear modulus and the mass density of the FGM interlayer are assumed to vary continuously between those of the two coaxial cylinders. This mixed boundary value problem is first reduced to a singular integral equation with a Cauchy type kernel in the Laplace domain by applying Laplace and Fourier integral transforms. The singular integral equation is then solved numerically and the dynamic stress intensity factor (DSIF) is also obtained by a numerical Laplace inversion technique. The DSIF is found to rise rapidly to a peak and then reduce and tend to the static value almost without oscillation. The influences of the crack location, the FGM interlayer thickness and the relative magnitudes of the adjoining material properties are examined. It is found among others that, by increasing the FGM gradient, the DSIF can be greatly reduced.

Formation, Thermal Stability and Deformation Behavior of Graphite-Flakes Reinforced Cu-based Bulk Metallic Glass Matrix Composites

Graphite-flake reinforced Cu47Ti34Zr11 Ni-8 bulk metallic glass matrix composite was fabricated by water-cooled copper mould cast. Most of the graphite flakes still keep unreacted and distribute uniformly in the amorphous matrix except that some reactive wetting occurs by the formation of TiC particles around the flakes. It reveals that the presence of graphite flakes does not affect the onset of the glass transition temperature, crystallization reaction and liquidus of the metallic glass. The resulting material shows obvious serrated flow and higher fracture strength under room temperature compressive load, comparing with the monolithic bulk metallic glass (BMG). Three types of interaction between the shear bands and graphite flakes, namely, shear band termination, shear bands branching and new shear bands formation near the graphite flakes can be observed by quasi-static uniaxial compression test and bonded interface technique through Vickers indentation.

3D Anisotropic Elastoplastic-Damage Model and its Application in Simulating the Behavior of Rock Materials

A 3D anisotropic elastoplastic-damage model was presented based on continuum damage mechanics theory. In this model, the tensor decomposition technique is employed. Combined with the plastic yield rule and damage evolution, the stress tensor in incremental format is obtained. The derivate eigenmodes in the proposed model are assumed to be related with the uniaxial behavior of the rock material. Each eigenmode has a corresponding damage variable due to the fact that damage is a function of the magnitude of the eigenstrain. Within an eigenmodes, different damage evolution can be used for tensile and compressive loadings. This model was also developed into finite element code in explicit format, and the code was integrated into the well-known computational environment ABAQUS using the ABAQUS/Explicit Solver. Numerical simulation of an uniaxial compressive test for a rock sample is used to examine the performance of the proposed model, and the progressive failure process of the rock sample is unveiled.

Strain Gradient Effects on Deformation Strengthening Behavior of Particle Reinforced Metal Matrix Composites

Dislocation models with considering the mismatch of elastic modulus between matrix and reinforcing particles are used to determine the effective strain gradient \ita for particle reinforced metal matrix composites (MMCp) in the present research. Based on Taylor relation and the kinetics of dislocation multiplication, glide and annihilation, a strain gradient dependent constitutive equation is developed. By using this strain gradient-dependent constitutive equation, size-dependent deformation strengthening behavior is characterized. The results demonstrate that the smaller the particle size, the more excellent in the reinforcing effect. Some comparisons with the available experimental results demonstrate that the present approach is satisfactory.

PMMA with Long-Persistent Phosphors and Its Behavior of Luminescence

A new kind of rare earth material with high efficient long-persistent phosphors, such as SrAl2O4: Eu, Dy, has been developed in recent years. The PMMA with long-persistent phosphors is typical one of applications for the phosphors. In this work, we try to probe into the affection of the manufacture process on the PMMA with long-persistent phosphors, to analyze its performance, and its luminescence behavior, especially to study the self-excitation of the PMMA with long-persistent phosphors.

Plastic constitutive behavior of short-fiber/particle reinforced composites

A cylindrical cell model based on continuum theory for plastic constitutive behavior of short-fiber/particle reinforced composites is proposed. The composite is idealized as uniformly distributed periodic arrays of aligned cells, and each cell consists of a cylindrical inclusion surrounded by a plastically deforming matrix. In the analysis, the non-uniform deformation field of the cell is decomposed into the sum of the first order approximate field and the trial additional deformation field. The precise deformation field are determined based on the minimum strain energy principle. Systematic calculation results are presented for the influence of reinforcement volume fraction and shape on the overall mechanical behavior of the composites. The results are in good agreement with the existing finite element analyses and the experimental results. This paper attempts to stimulate the work to get the analytical constitutive relation of short-fiber/particle reinforced composites.

Strain Rate-Dependent Compressive Deformation Behavior of Nd-Based Bulk Metallic Glass

Compressive deformation behavior of the Nd60Fe20Co10Al10 bulk metallic glass was characterized over a wide strain rate range (6.0 x 10(-4) to 1.0x10(3) s(-1)) at room temperature. Fracture stress was found to increase and fracture strain decrease with increasing applied strain rate. Serrated flow and a large number of shear bands were observed at the quasi-static strain rate (6.0 x 10(-4)s(-1)). The results suggest that the appearance of a large number of shear bands is probably associated with flow serration observed during compression; and both shear banding and flow serration are a strain accommodation and stress relaxation process. At dynamic strain rates (1.0 x 10(3) s(-1)), the rate of shear band nucleation is not sufficient to accommodate the applied strain rate and thus causes an early fracture of the test sample. The fracture behavior of the Nd60Fe20Co10Al10 bulk metallic glass is sensitive to strain rate.

Behavior of Multiple Shear Bands in Zr-Based Bulk Metallic Glass

The deformation behavior of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass was studied by in situ scanning electron microscopy (SEM) quasi-static uniaxial compression tests at room temperature. Multiple shear bands were observed with a large plasticity. Microscopic examination demonstrates that slipping, branching and intersecting of multiple shear bands are the main mechanisms for enhancing the plasticity of this metallic glass. Additionally, nano/micro-scale voids and cracks at the intersecting sites of shear bands and preferential etching of shear bands were observed as well. These observations demonstrated that the formation of shear bands in bulk metallic glasses is resulted mainly from local free volume coalescence.

Atomistic Simulations of the Mechanical Behavior of Fivefold Twinned Nanowires

Atomistic simulations are used to investigate the mechanical behavior of metal nanowire with fivefold twinned structure. The twinned nanowires were reported in recent experiments [B. Wu et al., Nano Lett. 6, 468 (2006)]. In the present paper, we find that the yield strength of the fivefold twinned Cu nanowire is 1.3 GPa higher than that of the face-centered-cubic (fcc) < 110 > single crystalline Cu nanowire without fivefold twinned structure, and the microstructure-hardened mechanism is primarily due to the twinned boundaries which act as the barriers for the dislocation emission and propagation. However, we also find that the fivefold twinned Cu nanowire has lower ductility than that of fcc < 110 > single crystalline Cu nanowire without the twinned structure, and this is mainly attributed to the scarcity and low mobility of dislocations. In addition, in our simulations the effect of preexisting stacking faults and dislocations on strength of the fivefold twinned nanowires is investigated.