Positional distribution of fatty acids on the glycerol backbone during the biosynthesis of glycerolipids in Ectocarpus fasciculatus

The biosynthesis of glycolipids in E. fasciculatus was studied by C-14 label and chase. The fatty acids in sulphoquinovosyl diacylglycerol (SQDG) were almost 16-carbon and 18-carbon ones. In addition to the two fatty acids, monogalactosyl diacylglycerol (MGDG) and digalactosyl diacylglycerol (DGDG) contained 8.5 mol% and 31.0 mol% of eicosapentaenoic acid (20 : 5), respectively, and this fatty acid was usually distributed in the sn-1 position of the glycerol backbone. When plants were incubated with [2-C-14] acetate, differences existed in the positional distribution of the labeled fatty acids in sn-1 and sn-2 among the three glycerolipids. In SQDG C-14-labeled fatty acids were distributed uniformly in the sn-1 and sn-2 positions. In DGDG, C-14-labeled fatty acids were mainly distributed in the sn-2 position. In MGDG, the radioactivity of fatty acids in sn-1 position was far greater than that in sn-2 position after a 30 min pulse label, and the difference in radioactivity between the two positions decreased rapidly. The above results indicated that differences in the positional distribution of C-14-labeled fatty acids between sn-1 and sn-2 positions might be related to 20 : 5 and the biosynthesis of DGDG. Our results also suggested that E. fasciculatus had the same DGDG biosynthetic pathway as that in higher plants and galactosyl transferase was selective for MGDC.

Study of three elastic-plastic constitutive models by non-proportional finite deformations of OFHC copper

Experimental stress-strain data of OFHC copper first under torsion to 13% and then under torsion-tension to about 10% are used to study the characteristics of three elastic-plastic constitutive models: Chaboche's super-positional nonlinear model, Dafalias and Popov's two surface model and Watanabe and Atluri's version of the endochronic model. The three models, originally oriented for infinitesimal deformation, have been extended for finite deformation. The results show (a) the Mises-type yield surface used in the three models brings about significant departure of the predictions from the experimental data; (b) Chaboche's and Dafalias' models are easier than Watanabe and Atluri's model in determining the material parameters in them, and (c) Chaboche's and Watanabe & Atluri's models produce almost the same prediction to the data, while Dafalias' model cannot accurately predict the plastic deformations when a loading path changes in its direction. Copyright (C) 1996 Elsevier Science Ltd

Parallel optical negabinary signed-digit computing: algorithm and optical implementation

Negabinary is a component of the positional number system. A complete set of negabinary arithmetic operations are presented, including the basic addition/subtraction logic, the two-step carry-free addition/subtraction algorithm based on negabinary signed-digit (NSD) representation, parallel multiplication, and the fast conversion from NSD to the normal negabinary in the carry-look-ahead mode. All the arithmetic operations can be performed with binary logic. By programming the binary reference bits, addition and subtraction can be realized in parallel with the same binary logic functions. This offers a technique to perform space-variant arithmetic-logic functions with space-invariant instructions. Multiplication can be performed in the tree structure and it is simpler than the modified signed-digit (MSD) counterpart. The parallelism of the algorithms is very suitable for optical implementation. Correspondingly, a general-purpose optical logic system using an electron trapping device is suggested. Various complex logic functions can be performed by programming the illumination of the data arrays without additional temporal latency of the intermediate results. The system can be compact. These properties make the proposed negabinary arithmetic-logic system a strong candidate for future applications in digital optical computing with the development of smart pixel arrays. (C) 1999 Society of Photo-Optical Instrumentation Engineers. [S0091-3286(99)00803-X].

Substrate dependence of InGaAs quantum dots grown by molecular beam epitaxy

A systematic study of self-organized In0.5Ga0.5As quantum dots (QDs) and islands grown by molecular beam epitaxy on (100) and (n11) A/B GaAs substrates is given, where n varies from 1 to 5. Low-temperature photoluminescence results show that the properties of the dots have a strong dependence on the substrate orientation as revealed by atomic force microscopy, consistent with the differences in size, shape, and distribution of QDs on different substrates. From (100) to (111) surface, the photoluminescence peak position of dots on B surfaces is found to blueshift more than that on A surfaces. QDs are also formed on (511) A surface. The positional distribution of these dots exhibits a wavy shape, which is related to the corrugated structure of this surface. Two kinds of islands are formed on (111) A surface, but further work is needed to explain the mechanism of these islands. (C) 2001 American Vacuum Society.

黄土旱塬不同氮肥用量下冬小麦干物质累积和氮素吸收利用过程研究

利用旱作长期定位施肥试验研究了不同氮肥用量对冬小麦干物质累积和氮素吸收利用的影响,结果显示,不同处理下干物质累积变化趋势都呈"S"型曲线,且冬小麦各生育期干物质量,随氮肥用量的增加而增大,说明氮肥对促进冬小麦干物质累积作用显著。干物质累积速率均呈现明显的单峰曲线,拔节-灌浆阶段累积速率最大,是干物质累积的重要时期。小麦植株含氮量和氮素累积量都随氮肥用量增加而升高,在冬前-拔节期和开花-灌浆期两个阶段,冬小麦植株氮素累积量较大,累积速率快,是氮素吸收利用的两个关键阶段。

几种中药材的化学成分及其定性定量检测方法研究

本论文由四部分组成。第一部分报道了佛手参提取物的化学成分研究，建立了活性成分含量测定的高效液相测定和指纹图谱研究，采用液质联用技术鉴定了主要色谱峰；第二部分报道了丹参及其复方制剂的特征图谱研究；第三部分探讨了两面针生物碱的电喷雾质谱裂解规律，并采用液质联用技术分离鉴定了提取物中的多种生物碱。第四部分概述了液质联用在药物代谢研究中的运用。 第一部分包括第一、第二和第三章。第一章针对佛手参（Gymnadeniaconopsea）块茎的甲醇提取物，采用大孔树脂和反相硅胶柱层析等各种分离方法，共分离鉴定出4 个化合物，通过波谱分析将它们的结构确定为dactylorhin B (1)、loroglossin (2)、dactylorhin A (3)和militarine (4)。这4 个化合物均是首次从佛手参中分离得到的琥珀酸葡萄糖苷类成分。第二章采用高效液相色谱法对西藏、四川、河北、青海和尼泊尔等不同地区产的十个佛手参样品进行腺嘌呤核苷和对羟基苯甲醇的定量分析，结果表明这2 个成份可视为佛手参的特征成分，但也注意到产地不同该2 个特征成分的含量也有所不同。第三章采用标准中药指纹图谱相似度计算软件，以10 个佛手参样品HPLC 图谱的平均值为相似性评价对照模板，对10 个样品进行了相似度评价，并经液质联用分析指认了7 个共有峰，分别为腺嘌呤核苷(1)、对羟基苯甲醇(2)、对羟基苯甲醛(3) 、dactylorhin B(4) 、loroglossin(5)、dactylorhin A(6)和militarine(7)。 第二部分包括第四、第五、第六和第七章。第四章运用电喷雾质谱检测了对照药材和五个不同产地的丹参药材中脂溶性和水溶性成分，系统地探讨了多种成分的电喷雾质谱规律，并以对照药材为标准建立了特征指纹图谱。五个产地的药II材通过与对照药材相对比，采用聚类分析的方法，得到了定性的鉴别与判断。并采用液质联用技术对丹参药材提取液中的化学成份进行分析，推测了九个特征峰，并对六样品的液相色谱图进行了聚类分析。第五章探讨了三七皂苷的电喷雾质谱电离和裂解规律，并采用电喷雾质谱法对三七标准药材，血通片中的皂苷成分进行了分析。第六章运用电喷雾质谱研究复方丹参片提取液的特征图谱，并和单味药材丹参和三七的特征图谱进行了对比研究。并运用HPLC-ESI MSn 分析鉴定了复方丹参片提取液中的化学成分，推测了12 个色谱峰。第七章总结了电喷雾质谱和液质联用技术在丹参药材，三七药材及复方丹参制剂中的运用的优势和局限性。 第三部分（第八章）研究了两面针生物碱中二氢白屈菜红碱(1)、二氢两面针碱(2)、8-酮基二氢白屈菜红碱(3)、8-丙酮基二氢两面针碱(4)、两面针碱(5)、和1,3-二(8-二氢两面针碱)丙酮(6)等六个苯并菲啶型生物碱的电喷雾质谱裂解规律，其中二氢两面针碱和二氢白屈菜红碱，8-丙酮基二氢两面针碱和8-酮基二氢白屈菜红碱是两对二个甲氧基分别在C-9 和C-10，C-10 和C-11 的同分异构体。实验结果表明，在相同的碰撞能下，这类位置异构体的ESI MS2 质谱二级碎片离子的相对峰度存在很大差异，这可以用于区分该类同分异构体，采用液-质联用可以对两面针的总生物碱提取物中的这些同分异构体加于区分。同时在本实验采用的液相色谱条件下，多种生物碱得到较好的分离，通过和对照品的保留时间，紫外吸收光谱及电喷雾质谱图对照，鉴定了11 个主要色谱峰。 第四部分（第九章）对液质联用技术在药物代谢中的运用进行了综述。 This dissertation consisted of four sections. The first two sections elaborated thephytochemical investigation of the rhizomes Gymnadenia conopsea R. Br., methoddevelopment for rapid identifying and qutifying the chemical condtituent of thistibetant medicine, and the chemical fingerprint analysis of rhizomes of G. conopsea,Salviae miltiorrhiza and P. notoginseng. The third section studied the fragmentationmechanism of six alkaloids from Zanthoxylum nitidium and method development forrapid identifying varieties of alkaloids from the extract of this herbal medicine. Thefourth section reviewed HPLC- MS method in drug metabolism studies. The first section consisted of chapters 1, 2, 3. Chapter 1 elaborated the phytochemicalinvestigation of Gymnadenia conopsea R. Br. Four succinate derivative esters wereisolated from the methanol extract of the rhizomes of G. conopsea through repeatedcolumn chromatography on normal and reversed phase silica gel, their structures weredetermined by ESI-MS, 1D and 2D NMR evidence. They were firstly discoveredfrom this species. In chapter 2, a high-performance liquid chromatography.diodearray detection (HPLC-DAD) method has been firstly developed for quantitation oftwo characteristic constituents, adenosine and 4-hydroxybenzyl alcohol, from theextract of rhizomes of G. conopsea. All 10 samples of G. conopsea contained differentamount of adenosine and 4-hydroxybenzyl alcohol. Adenosine and the4-hydroxybenzyl alcohol can be applied in identification and quality control for theroots of G. conopsea. In chapter 3, a high-performance liquid chromatography.diodearray detection.tandem mass spectrometry (HPLC-DAD-MSn) method has been firstly developed for chemical fingerprint analysis of rhizomes of G. conopsea andrapid identification of major compounds in the fingerprints. Comparing the UV andMS spectra with those of authentic compounds, seven main peaks in the fingerprintswere identified as adenosine, 4-hydroxybenzyl alcohol, 4-hydroxybenzyl aldehyde,dactylorhin B, loroglossin, dactylorhin A and militarine. The Computer AidedSimilarity Evaluation System for Chromatographic Fingerprint of TraditionalChinese Medicine (CASES) was employed to evaluate the similarities of 10 samplesof the rhizomes of G. conopsea collected from Sichuan, Qinghai and Hebei provincesand Tibet autonomous region of China, and Nepal. These samples from differentsources had similar chemical fingerprints to each other. The second section consisted of chapters 4, 5, 6 and 7. In chapter 4，both thecharacteristic spectra of liposoluble tanshinones and aqueous-soluble salvianolic acidswere established by the electrospray ionization mass spectrometry (ESI MS)technique and the differences between standard and crude rhizomes of Salviaemiltiorrhiza Bge. from 5 sources were analyzed. The law of electrospray ion trap mass(ESI ITMS) of typical tanshinones and salvianolic acids is studied.The analysis of the chemical constituent of rhizomes of Salviae miltiorrhiza Bge. byliquid chromatography coupled with mass spectrum (LC/MS) technique wasestablished，and the distances among standard herb and crude herb from 5 sourceswere calculated by clustering analysis. According the DAD spectra and MS2 data，9tanshinones could be speculated. In chapter 5, the character spectra of total saponinsin P. notoginseng extracts were established by ESI ITMS and selective ion monitoring(SIM) technology. The law of notoginsenosides by ESI MS2 was studied. In chapter 6,the characteristic spectra of Compound Danshen Tablet established and compared byESI-MS and HPLC/DAD/MS, 6 known tanshinones and 3 saponins were speculated.In chapter 7, the advantage and disadvantage of the strategy, using the ESI ITMS andLC/MS techniques for study of characteristic spetra of danshen and Compound Danshen Tablet, were summerized. The third section (chapter 8) studied the fragmentation mechanism of six alkaloids,dihydronitidine, dihydrochelerythrine, 8-acetonyl dihydronitidine,8-acetonyldrochelerythrine, nitidine and 1,3-bis (8-dihydronitidinyl)-acetone, by ESIMSn. Tandem mass spectrometry experiments indicated that different substitutionsites of the methoxyl groups at C-9 and C-10 or at C-10 and C-11 determined thedifferent abundances of the MS2 fragmentation ions using the same collision energy.According to the different abundances of MS2 product ions, positional isomericbenzo[c] phenanthridine alkaloids can be differentiated. Moreover, ten constituents inthe crude alkaloids extract from the roots of Zanthoxylum nitidium were rapidlyidentified by high-performance liquid chromatography coupled with tandem massspectrometry (HPLC-MSn), through comparing the retention times and ESI MSn spectra with the authentic standards. The fourth section (chapter 9) is a review on HPLC-MS method development in drug metabolism studies.

中能重离子在位置灵敏CsI（Tl)探测器中能损与光输出响应的关系

In this paper, we describe the structure and readout system of a two-dimension positional sensitive CsI(Tl) detector, and investigates the relation between energy lose and light output of the CsI(Tl) detector with secondary beams in intermediate energy.Bρ+(ΔE-TOF) method was used to distinguish the secondary beam.Linearity of the position signals of the CsI(Tl) was corrected.Energy signals from the CsI(Tl) detector were calibrated using the relationship of the Z, A and the light output response of the incid...中文摘要：描述了一种双维位置灵敏CsI(Tl)探测器的结构及其读出系统,用中能次级束研究其能损与光输出关系。使用Bρ+(ΔE-TOF)方法鉴别次级束,刻度了CsI(Tl)探测器位置信号的线性,并用其光输出与入射粒子的A、Z关系刻度其能量。结果表明,CsI(Tl)探测器输出信号的ADC读出与QDC读出(即其光输出)有很好的线性关系。

Colloidal photonic crystals with a graded lattice-constant distribution

In this work, a gradient polystyrene colloidal photonic crystal was fabricated by annealing in a graded temperature field. The lattice constant of the gradient crystal gradually varied along the temperature-gradient direction. The positional bandgap wavelength as well as the attenuation of the bandgap wavelength could be tuned dependent on the position of the gradient colloidal crystal along the gradient direction because of the lattice-constant variation.

DNA fingerprinting of selected Laminaria (Phaeophyta) gametophytes by RAPD markers

Random amplified polymorphism DNA (RAPD) analysis was applied to germplasm characterization in 33 different selected Laminaria male and female gametophytes. The positional homology of the RAPD analysis using sequence characterized applied region (SCAR) method was successfully conducted. A total of 233 polymorphic loci were obtained from 18 selected primers after screening, of which 27 stable and clear bands were selected to construct a fingerprint map for discrimination of each gametophyte. Seven RAPD markers from five primers were finally determined by a computer program to construct the fingerprint map. Three specific markers closely related with gametophytes were obtained and were converted to gametophytic SCAR markers, the first SCAR marker report on Laminaria germplasm and applicable to cultivars identification. These results demonstrated the feasibility of applying RAPD markers to germplasm characterization in selected Laminaria gametophytes, and can provide a molecular basis for breeding new Laminaria strains. (C) 2004 Elsevier B.V. All rights reserved.

水下机器人粘性类水动力数值计算方法研究

通过对通用流体动力学仿真软件CFX的研究,提出了一套水下机器人粘性类水动力的数值计算方法.该方法采用标准k-ε湍流模型计算位置力系数,采用标准k-ω湍流模型计算旋转力系数及其它耦合水动力系数.对“CR-02”6000 m自治水下机器人的计算表明,通过这种方法获得的水动力系数具有较高的精度,可以满足水下机器人方案设计阶段的操纵性设计、运动预报和仿真等需求.