Synthesis and electrochemical characteristics of lanthanide complexes with 2-nitro-5,10,15,20-tetraphenylporphyrin and acetylacetonate

Four lanthanide complexes with 2-nitro-5,10,15,20-tetraphenylporphyrin and acetylacetonate were prepared and characterized by elemental analyses, LR, UV-Visible,H-1 NMR, XPS and molar conductance. The redox properties of the lutetium complex with 2-nitro-5,10,15,20-tetraphenylporphyrin and acetylacetonate in dichloromethane were studied by cyclic voltammetry.

Stress, absorptance and laser-induced damage threshold properties of 355-nm HR coatings

A number of 355-nm Al2O3/MgF2 high-reflectance (HR) coatings were prepared by electron-beam evaporation. The influences of the number of coating layers and deposition temperature on the 355-nm Al2O3/MgF2 HR coatings were investigated. The stress was measured by viewing the substrate deformation before and after coating deposition using an optical interferometer. The laser-induced damage threshold (LIDT) of the samples was measured by a 355-nm Nd:YAG laser with a pulse width of 8 ns. Transmittance and reflectance of the samples were measured by a Lambda 900 spectrometer. It was found that absorptance was the main reason to result in a low LIDT of 355-nm Al2O3/MgF2 HR coatings. The stress in Al2O3/MgF2 HR coatings played an unimportant role in the LIDT, although MgF2 is known to have high tensile stress.

Study of Al2O3/MgF2 HR coatings at 355 nm

With the present work we tried to study the effective methods to improve the laser-induced damage threshold (LIDT) and reflectance of HR coatings at 355 nm. The work presented in this paper wits part of an ongoing study about vacuum annealing. It was dedicated to study the effects Of Vacuum annealing with different temperature gradients on the structure, optical properties and laser-induced damage threshold (LIDT) of 355nm Al2O3/MgF2HR coatings. A number of samples were prepared by electron beam evaporation using the same deposition process with an optimal deposition temperature of 280 degrees C. After deposition, samples were annealed in the coating chamber for 3 h with different temperature gradients. Morphologies of the samples were observed by Leica-DMRXE. Microscope, Structure of the samples had been characterized by X-ray diffraction (XRD). Transmittance and reflectance of the samples were measured by Lambda 900 Spectrometer, The LIDT of the samples was measured by a 355 nm Nd:YAG laser with a pulse width of 8 ns. It was found that the temperature gradient of vacuum annealing had significant effects on the morphology, structure, absorption, and LIDT of the samples, (c) 2005 Elsevier Ltd. All rights reserved.

Overcoat dependence of laser-induced damage threshold of 355 nm HR coatings

A series of HR coatings, with and without overcoat, were prepared by electron beam evaporation using the same deposition process. The laser-induced damage threshold (LIDT) was measured by a 355 nm Nd:YAG laser with a pulse width of 8 ns. Damage morphologies of samples were observed by Leica-DMRXE Microscope. The stress was measured by viewing the substrate deformation before and after coatings deposition using an optical interferometer. Reflectance of the samples was measured by Lambda 900 Spectrometer. The theoretical results of electric field distributions of the samples were calculate by thin film design software (TFCalc). It was found that SiO2 overcoat had improved the LIDT greatly, while MgF2 overcoat had little effect on the LIDT because of its high stress in the HR coatings. The damage morphologies were different among HR coatings with and without overcoats. (c) 2005 Elsevier B.V. All rights reserved.

Temperature fields of 355 nm HR coatings based on the interface absorption model

Temperature fields of 355 nm high-reflectance (HR) coatings were investigated based on the interface absorption model. It was found that the highest temperature in the HR coatings increased with an increase in the extinction coefficient of the interface A, B, C, Al2O3 and MgF2. The highest temperature of HR coatings that can be reached increased quickly with the increase in the extinction coefficient of interface A in particular. The temperature rises of 355 nm HR coatings at different layers and different deposition temperatures were investigated based on experiments also. The damage mechanism of 355 nm HR coatings was confirmed with temperature fields and the interface absorption model.

~(210)Pb和~(137)Cs法对比研究武汉东湖现代沉积速率

对采自东湖 站和 站的沉积物采用210Pb和137Cs相结合的方法测定沉积速率,210Pb法测出东湖 站和 站的沉积速率为8.73mm/a和6.90mm/a,137Cs测出东湖 站和 站的沉积速率为7.4mm/a和5.8mm/a.分析了两种方法测定结果差异产生的原因,并与以往的研究相对比,探讨东湖沉积速率空间分布的规律性,沉积速率变化与人类活动的关系、沉积速率与扰动的关系.

利用水生植物清除水体中放射性物质的研究 (Ⅲ)水生植物对Sr~(90)、Y~(91)、Cs~(137)、Ce~(144)的积累、释放及Ca对Sr~(90)吸收的影响

5种水生植物对所用4种放射性同位素都有一定的清除能力,其清除能力的大小不仅取决于生物的种类,而且还取决于生物本身代谢率的高低。试验结果:去污率高的可达80%,积累系数最高可达1,500;水体中含Ca量的多少对生物吸收积累放射性物质的多少有一定的影响;生物在积累放射性物质之后,转移到无放射性物质的水体中将释放出原积累的一部分放射性物质。

确定~(137)Cs背景值所需的采样点数与采样面积

137Cs背景值的确定是利用核示踪技术研究土壤侵蚀的前提和根本,直接关系到侵蚀速率计算的准确与否。而大部分研究对137Cs背景值的确定均采取随机采样,没有统一的采样点数与确定的采样面积。本研究利用网格加密采样法,对未扰动地和长期耕种且未平整的农耕地各两块样地的137Cs背景值空间变异进行了分析,结果表明:在未扰动地与农耕地采样地块,137Cs采样点数与背景值空间变异系数都存在指数回归关系;在未扰动地块137Cs背景值存在较大空间变异性,且随着网格面积的扩大137Cs空间变异系数表现为增加趋势,在0.25m2范围内选取最少11个样点才能满足试验精度;在农耕地采样地块,因长期的耕种作用使得137Cs在耕层中混合相对均匀,137Cs背景值空间变异性显著变小,最少选取7个样点就能满足试验精度,且不受采样面积的影响。

~(137)Cs示踪技术背景值研究进展与建议

利用环境核素137Cs示踪技术研究土壤侵蚀被越来越多的科研人员所采用,而背景值的确定是利用该技术研究土壤侵蚀的前提和根本,直接关系到侵蚀速率计算的准确与否。本文从137Cs背景值采样点的选取方式,137Cs全球空间分布预报模型以及影响137Cs沉降因素等方面进行了总结性综述,对137Cs背景值研究应注意的问题和今后研究重点提出了建议。

高抗冲聚苯硫醚（PPS）的研究；PC/PBA-cs-PMMA共混体系的研究

聚苯硫醚（PPS）是特种工程塑料中应用最广、价格最低的品种。但由于其耐冲击性差，限制了其做为结构材料的应用。本论文通过多种研究方法，研究了PPS抗冲击性差的根本原因和改善途径，从改变其聚集态结构入手，使韧性得到了很大改善，为高抗冲PPS的研制提供和积累了丰富了可靠的数据，其创新性成果体现在：提出了含刚性非晶相、可动（类液）非晶相和晶相的PPS三相模型并计算了各相的相对含量、测定了各相的密度；发现了PPS的冲击强度与其结晶度呈近似线性的关系。是十分有意义的基础性工作。用核壳乳液聚合物做为PC的增韧剂，有效地控制了共混物的形态结构、计算出了界面层厚度与界面张力，为制备具有综合性能的改性PC材料奠定了理论和实践基础。