Chaotic dynamic analysis of viscoelastic plates

The dynamic buckling of viscoelastic plates with large deflection is investigated in this paper by using chaotic and fractal theory. The material behavior is given in terms of the Boltzmann superposition principle. in order to obtain accurate computation results, the nonlinear integro-differential dynamic equation is changed into an autonomic four-dimensional dynamical system. The numerical time integrations of equations are performed by using the fourth-order Runge-Kutta method. And the Lyapunov exponent spectrum, the fractal dimension of strange attractors and the time evolution of deflection are obtained. The influence of geometry nonlinearity and viscoelastic parameter on the dynamic buckling of viscoelastic plates is discussed.

Dynamic analysis of arrest of buckle propagation on a beam on a nonlinear elastic foundation by FEM

Based on the dynamic governing equation of propagating buckle on a beam on a nonlinear elastic foundation, this paper deals with an important problem of buckle arrest by combining the FEM with a time integration technique. A new conclusion completely different from that by the quasi-static analysis about the buckle arrestor design is drawn. This shows that the inertia of the beam cannot be ignored in the analysis under consideration, especially when the buckle propagation is suddenly stopped by the arrestors.

Dynamic analysis of V-folded cavity for TEM00 operation of end-pumped solid-state laser

Based on graphic analysis design method of optical resonator, a simple design expression of V-folded cavity of end-pumped solid-state lasers with TEM00 operation is described, which satisfies two criterias of the resonator design. We give numerical simulation of spot size as a function of thermal focal length using this design approach whose advantages are validated experimentally.

Quasi-thermo dynamic analysis of MOVPE growth of GaxAlyIn1-x-yN

A quasi-thermodynamic model of metalorganic vapor phase epitaxy (MOVPE) growth of GaxAlyIn1-x-yN alloys has been proposed. In view of the complex growth behavior of GaxAlyIn1-x-yN, we focus our attention on the galliumrich quaternary alloys that are lattice matched to GaN, In0.15Ga0.85N or Al0.15Ga0.85N, which are widely used in the GaN-based optoelectronic devices. The relationship between GaAlInN alloy composition and input molar ratio of group III metalorganic compounds at various growth conditions has been calculated. The influence of growth temperature, nitrogen fraction in the carrier gas, input partial pressure of group III metalorganics, reactor pressure, V/III ratio and the decomposition rate of ammonia on the composition of deposited alloys are studied systematically. Based on these calculated results, we can find out the appropriate growth conditions for the MOVPE growth of GaxAlyIn1-x-yN alloy lattice matched to GaN, In0.15Ga0.85N or Al0.15Ga0.85N. (C) 2002 Elsevier Science B.V. All rights reserved.

Hill Instability Analysis Of Tlp Tether Subjected To Combined Platform Surge And Heave Motions

This paper presents the Hill instability analysis of Tension Leg Platform (TLP) tether it, deep sea. The 2-D nonlinear beam model which is Undergoing Coupled axial and transverse vibrations, is applied. The governing equations are reduced to nonlinear Hill equation by use of the Galerkin's method and the modes superposition principle. The Hill instability charted Lip to large parameters is obtained. An important parameter M is defined and can he expressed as the functions of tether length, the platform surge and heave motion amplitudes. Some example studies are performed for various environmental conditions. The results demonstrate that the nonlinear coupling between the axial and transverse vibrations has a significant effect on the response of structure.. It needs to be considered for the accurate dynamic analysis of long TLP tether subjected to the combined platform surge and heave motions.

Dynamic Measurement System for Dipoles of RCS for CS

A dynamic measurement system was developed by the Institute of Modern Physics (IMP) for the dipole prototype of Rapid Cycle Synchrotron (RCS) of China Spallation Neutron Source (CSNS). The repetition frequency of RCS is 25 Hz. The probe is a moving arc searching-coil, and the data acquisition system is based on the dynamic analysis modular of National Instrument. To get the error of high order harmonics of the field at basic frequency, the hardware integrator is replaced by a high speed ADC with software filter and integrator. A series of harmonic coefficients of field are used to express the varieties of dynamic fields in space and time simultaneously. The measurement system has been tested in Institute of High Energy Physics (IHEP), and the property of the dipole prototype of RCS has been measured. Some measurement results and the repeatability of system are illustrated in this paper.

Governing Equations and Numerical Solutions of Tension Leg Platform with Finite Amplitude Motion

It is demonstrated that when tension leg platform (TLP) moves with finite amplitude in waves, the inertia force, the drag force and the buoyancy acting on the platform are nonlinear functions of the response of TLP. The tensions of the tethers are also nonlinear functions of the displacement of TLP. Then the displacement, the velocity and the acceleration of TLP should be taken into account when loads are calculated. In addition, equations of motions should be set up on the instantaneous position. A theoretical model for analyzing the nonlinear behavior of a TLP with finite displacement is developed, in which multifold nonlinearities are taken into account, i.e., finite displacement, coupling of the six degrees of freedom, instantaneous position, instantaneous wet surface, free surface effects and viscous drag force. Based on the theoretical model, the comprehensive nonlinear differential equations are deduced. Then the nonlinear dynamic analysis of ISSC TLP in regular waves is performed in the time domain. The degenerative linear solution of the proposed nonlinear model is verified with existing published one. Furthermore, numerical results are presented, which illustrate that nonlinearities exert a significant influence on the dynamic responses of the TLP.

基于变形修正的局部刚体化动力模型简化方法

提出一种基于变形修正的动力模型简化方法,以复杂工程结构的有限元模型为基础,根据运动同步性假设将结构分成若干同步性区域,采用适当的位移模式去逼近位移真值,再通过总体应变能最小来优化,从而得到整体位移与局部位移模式间的转换关系,算例结果表明了简化方法的有效性.

基于柔度修正的局部刚体化结构动力模型简化方法

提出一种基于柔度修正的局部刚体化结构动力模型简化方法.以复杂工程结构的有限元模型为基础,根据运动同步性假设将结构分成若干同步性区域,对每个区域引入准刚体模态,实现对结构的简化.同时对简化方法进行误差分析,利用柔度修正的思路实现对简化变化矩阵的修正,得到更精确的简化结果.以海洋平台结构作为算例应用该方法,得到了比较满意的简化结果.

三峡升船机系统动态响应分析

根据三峡升船机最新设计报告,采用有限元软件ANSYS构建了升船机系统有限元模型,包括承船厢、提升钢索、滑轮组、平衡重、厢内水体、驱动机构和刹车机构;通过数值模拟,对升船机系统进行了模态分析及动态响应研究,内容包括升船机系统的流固耦合模态及其在各种工况(起动、刹车、事故)下的动态响应和影响因素分析,如弹簧刚度、误载水深、阻尼、承船厢的位置等.计算结果表明:对于升船机这样一个复杂系统,该文所建立的有限元模型及数值算法是合理的,其结果可为升船机系统整体设计提供必要的参考.

永乐大钟及悬挂支撑系统的撞钟过程瞬态分析

采用ANSYS有限元分析软件对永乐大钟及其悬挂支撑系统建立了有限元模型,进行了撞钟过程有限元瞬态分析及动力强度校核。通过有限元计算,获得了大钟各局部考察对象及整体的应力、位移分布情况和各部分的动力响应和对强度的影响,为合理撞钟和加固提供了科学依据与技术指导。

Motion simulation of annular polishing

Based on the Coulomb friction model, the frictional motion model of workpiece relating to the polishing pad was presented in annular polishing. By the dynamic analysis software, the model was simulated and analysed. The conclusions from the results were that the workpiece did not rotate steadily. When the angular velocity of ring and the direction were the same as that of the polishing pad, the angular velocity of workpiece hoicked at the beginning and at the later stage were the same as that of the polishing pad before contacting with the ring. The angular velocity of workpiece vibrated at the moment of contacting with the ring. After that the angular velocity of workpiece increased gradually and fluctuated at a given value, while the angular velocity of ring decreased gradually and also fluctuated at a given value. Since the contact between the workpiece and the ring was linear, their linear velocities and directions should be the same. But the angular velocity of workpiece was larger than that of the polishing pad on the condition that the radius of the workpiece was less than that of the ring. This did not agree with the pure translation principle and the workpiece surface could not be flat, either. Consequently, it needed to be controlled with the angular velocity of ring and the radii of the ring and the workpiece, besides friction to make the angular velocity of workpiece equal to that of the polishing pad for obtaining fine surface flatness of the workpiece. Copyright © 2007 Inderscience Enterprises Ltd.}

新疆阜康地区森林资源与环境的空间分析

研究了新疆阜康地区森林植被资源与环境的特征和其30年来的变化，利用Arcinfo强大的空间分析功能，对资源、DEM模型、景观指数、环境价值和新疆降水量的地统计学规律进行较全面的分析。本文分为五个部分： 1、新疆阜康地区森林资源与环境空间数据库的建立森林资源与环境空间数据库的建立是它们空问分析的基础。利用多期的遥感图象和该区的地形图，建立森林分类图形和属性库（包括森林和环境自变量集）一体化的GIS空间数据库。为了提高TM遥感图象的分类精度，利用ERDAS图象处理软件，对它进行包括主成分、降噪、去条带和自然色彩变换等增强处理，采用监督分类和人工判读相结合的方法进行分类，采用R2V、ERDAS、Arcview、Arcinfo等软件的集成，使得小班面层与某些线层的无缝联接。成功地形成一套适于西部GIS的森林资源与环境空间数据库的技术路径。此外，对新疆阜康北部地区森林资源动态进行初步分析。 2、新疆阜康地区数字高程模型(DEM)及其粗差检测分析为了提高生态建模的精度，模拟和提取该区的地面特征至关重要。在已建立的森林资源与环境空间数据库的支持下，利用Arcinfo和ERDAS，建立了新疆阜康地区的1：5万数字高程模型(DEM)。通过提取地形的海拔、坡度、坡向特征因子，分析森林植被的垂直分布。通过对DEM的粗差检测分析，分析阜康地区的数字高程模型精度。 3、新疆阜康地区景观格局变化分析在1977年、1987年、1999年森林资源与环境空间数据库的支持下，利用景观分析软件编制三个时段的新疆阜康地区植被景观类型图，并分析了近30年来新疆阜康地区景观动态与景观格局变化。结果表明：①在此期间整个研究区的斑块数减少，斑块平均面积扩大，景观中面积在不同景观要素类型之间的分配更加不均衡，景观面积向少数几种类型聚集。说明了在这期间阜康地区的景观类型有向单一化方向发展的趋势;②农耕地分布呈破碎化的趋势，斑块平均面积变小，斑块间离散程度也更高：这些变化说明人为的经济活动在阜康地区的加剧，③天然林面积减少较多，水域的面积却呈现上升的趋势，冰川及永久积雪的面积呈下降趋势， 4、新疆阜康地区森林生态效益的初步分析从广义森林生态效益定义出发，针对12种森林生态效益因变量不完全独立、且各自的自变量集不完全相同，引入具有多对多特征且整体上相容的似乎不相关广义线性模型。通过构造12种森林生态效益的“有效面积系数”和“市场逼近系数”，在森林资源与环境空间数据库的支持下，对新疆阜康地区两期的森林生态效益进行科学的计量。结果表明：新疆阜康地区的森林生态效益货币量1987年是90673.8万元，1999年是84134.4万元，总体上呈下降趋势。 5、利用新疆气象站资料研究年降雨量的空间分布规律利用ArcGIS地统计学模块，在2000年新疆气候信息空间数据库和新疆DEM模型的支持下，做出了新疆地区的年降水量空间分布图。根据新疆气候资料建立趋势而分析模型、模拟了新疆降水量空间分布的趋势值。采用3种算法（距离权重法、普通Kriging法、协同Kriging方法）计算并比较分析了研究区多年的平均降水量的时空变化。利用模拟产生的精度最优的栅格降水空间数据库，建立的多年平均降水资源信息系统，可快速计算研究区内任一地域单元中降水的总量及其空间变化，可以生成高精度的气候要素空间分布图。