蹄蝠科的核型进化：比较染色体涂色、G带和C带分析

：与其姐妹科(菊头蝠科)相比，蹄蝠科的细胞遗传学研究较少。迄今为止，仅少数蹄蝠科几个物种有高分辨率的G带核型报道，且有关该科核型进化的大多数结论都是基于常规Giemsa染色研究而得。该研究利用三叶小蹄蝠的染色体特异探针，通过比较染色体涂色、G和C显带，建立了5种蹄蝠的染色体同源性图谱，并探讨了它们同源染色体间的G和C带异同。结果表明：罗伯逊易位、臂内倒位以及异染色质的扩增可能是蹄蝠科物种核型进化的主要机制。通过对这5种蹄蝠物种及其外群物种之间的同源染色体片段的比较分析，作者推测蹄蝠科的祖先核型并不像先前认为的全由端着丝粒染色体组成, 而应该含有中着丝粒染色体。

MEIOTIC CHROMOSOME BEHAVIOR IN FEMALE INTERSEXES OF ARTIFICIAL TRIPLOID TRANSPARENT-COLORED CRUCIAN CARP

Chromosome behavior in meiosis was studied by air-drying, C-banding and surface-spreading methods in female intersexes of artificial triploid transparent-colored crucian carp (Carassius auratus). Chromosome pairing and contraction were obviously asynchronous. The preferential pairing of two homologous chromosomes was the major pattern of chromosome pairing, and a few triple pairing, repeated pairing, telomer or centromere associating and multiple pairing were also observed in the pachytene cells. The metaphase I cells were mainly composed of univalents, bivalents and trivalents, as well as few of other multivalents, such as tetravalents, pentavalents, hexavalents and heptavalents, were also found in some metaphase I cells. The chromosome elements including uni-, bi-, tri- and other multivalents varied considerably among the metaphase I cells, and the associating patterns of multivalents were also diverse. Some 6 n and 12 n cells, in which premeiotic endomitosis occurred once or twice, were found at the prophase and first metaphase of meiosis, and the pairing and associating patterns were basically similar to that of the triploid cells.

ACHT操作引起黑麦(Secale cereale)染色体的畸变和重建

用ACHT处理黑麦萌动种子，对修复前后材料的观察和分析结果表明：1. ACHT操作引起染色体数目变化和染色体断裂损失。在一定 条件和范围内，不同处理引起的这种变化具有显著差异，条件越剧烈，染色体数目变化的范围和频率愈大，断片发生的数量和频率 也愈高，同时修复前后染色体数目的变化范围和频率与断片发生的数量和频率以及它们的修复频率均表现明显的相关性。2. ACHT 操作引起染色体畸变的多样性。经ACHT处理后，胚根细胞染色体有4种断裂方式，包括着丝粒断裂、次溢痕断裂、长臂断裂和短臂 断裂等，其中着丝断裂频率最高；产生6种断片类型，包括有着丝粒和端粒的、有着丝粒而无端粒的、有部分着丝粒和端粒的、有 部分着丝粒而无端粒的、只有端粒的、既无着丝粒也无端粒的断片等。3. ACHT操作引起遗传结构重建的多样性。经ACHT处理后， 对修复24-72小时材料进行核型比较(按Stebbins 和 Levan 标准)和随体分析，处理细胞在染色体数目、大小、形态、位置等方面 均发生显著变化，说明ACHT处理使这些细胞的染色体结构和染色体组型发生了深刻变化。进一步通过Giemsa C— 带分析，观察到 多种重建染色体类型，包括易位型染色体、附加型染色体、无着丝粒染色体、化染色体、增加的m染色体以及某些带型特异的染色 体等。4. RAPD 分析从分子水平上验证了ACHT能有效地引起遗传结构的改变。所用10种引物对处理和对照材料基因组DNA的扩增产 物在条带数目、条带位置及带型特征等方面均有明显差异，其中4种引物出现条带减少，6种引物出现条带增加，后者还包括一个带 位移动。这说明两种材料的基因组DNA具有明显的RAPD反应多态性差异。This paper descripes some results draw on the basis of the observation and analysis on the rye before and after repaired through treating its budding seeds by ACHT in contrast to without ACHT: 1. ACHT manipulation caused the number variation and breakage damage of rye chromosome. Within certain conditions and timits, this phenomenon caused by different treats had signifcant difference: the more the treatment condition is drastie, the more the chageable range and frequence of rye chromosomae number, and so is the produced fragments. Meanwhile, there existed striking relationship among the changeable range and frequence of rye chromosome, the produced number and frequence of fragments and repairing frequence. 2. ACHT manipulafion engendered the diversify of rye chromosomal aberration. Four breakage patterns and six sorts of fragment were observed by watching the chromosome of the rye radicle treated by ACHT, including centric breakage (occuring in the highest frequence), secondary constriction breakage, long arm breakage and short arm breakage to the former, Comprising that with both centromere and telomere, that with centromere and without telomere, that with partial centromere and with telomere, that with partfial ceetromere and without telomere, that only with telomere and that neither with centromere nor with telomere, etc. 3. ACHT manipulation engendered the diversify or rye genetic structs reconstruction. Karureotype analysis(according to Stebbins and Levan) and satellite anaeysis were carried out to rye radicle through 24-72-hour-long recoverage after ACHT manipulation, which showed remarkable change happened on the rye chromosomal number、shape、arm ration and pattern, etc. and also on the satellite number、size、shape and location etc. Those indicated that ACHT manipulation engendered violent changes to rye chromatin structure and chromosome type. Further Giemsa C-banding analysis showed many types of reconstructed chromosome, such as translocation、addition、without centromere、st and other chromosome. 4. RAPD analysis checked the validity of ACHT on changing genetic structure of rye on the level of molecular biology. The treated and recovered rye has different amplifying band pattern by using IO valid arbitary primers selected from 40 comparing with the control.

Cytological and Molecular Identification of Alien Chromatin in Giant Spike Wheat Germplasm

Alien chromosomes of twelve giant spike wheat germplasm lines were identified by C-banding, genomic in situ hybridization (GISH), sequence characterized amplified region (SCAR), and random amplified polymorphic DNA (RAPD). All lines showed a chromosome number of 2n = 42, five of them carried both a pair of wheat-rye (Triticum aestivum-Secale cereal) 1BL/1RS translocation chromosomes and a pair of Agropyron intermedium (Ai) chromosomes, three carried a pair of Ai chromosomes only, three others carried a pair of 1BL/1RS chromosomes only, and one carried neither 1BL/1BS nor Ai chromosome. Further identification revealed that the identical Ai chromosome in these germplasm lines substituted the chromosome 2D of common wheat (Triticum aestivum L.), designated as 2Ai. The genetic implication and further utilization of 2Ai in wheat improvement were also discussed.

Basic Mechanical Behaviors And Mechanics Of Shear Banding In Bmgs

In this paper, some basic mechanical behaviors of bulk metallic glasses (BMGs) were discussed. It can be found from the discussions that the mechanical behaviors of BMGs are mainly due to the formation and operation of shear bands in BMGs. Furthermore, the relevant mechanics of shear banding were investigated in the paper. The theoretical analysis of deformation coupling thermal softening and free volume creation softening demonstrates that the free volume creation and thermal softening can jointly promote the formation of shear bands in BMGs, and the observed post mortem. shear band width looks more like that governed by free volume creation. (C) 2007 Elsevier Ltd. All rights reserved.

Prevalence Of Shear Banding In Compression Of Zr41Ti14Cu12.5Ni10Be22.5 Pillars As Small As 150 Nm In Diameter

Recently, the size dependence of mechanical behaviors, particularly the yield strength and plastic deformation mode, of bulk metallic glasses (BMG) has created a great deal of interest. Contradicting conclusions have been drawn by different research groups, based on various experiments on different BMG systems. Based on in situ compression transmission electron microscopy (TEM) experiments on Zr41Ti14Cu12.5Ni10Be22.5 (Vit 1) nanopillars, this paper provides strong evidence that shear banding still prevails at specimen length scales as small as 150 nm in diameter. This is supported by in situ and ex situ images of shear bands, and by the carefully recorded displacement bursts under load control its well as load drops under displacement control. Finite element modeling of the stress state within the pillar shows that the unavoidable geometry constraints accompanying such experiments impart a strong effect on the experimental results, including non-uniform stress distributions and high level hydrostatic pressures. The seemingly improved compressive ductility is believed to be due to such geometry constraints. Observations underscore the notion that the mechanical behavior of metallic glasses, including strength and plastic deformation mode, is size independent at least in Vit 1. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

KARYOTYPE AND BANDING-PATTERNS OF FEA TREE RAT (CHIROMYSCUS-CHIROPUS)

Fea's tree rat (Chiromyscus chiropus) is a very rare species which there are only a few specimens in the world. The chromosomes of two male specimens, collected from Xishuanbanna, Yunnan, are analysed by several banding technique (G-, C-bands, as well as Ag-staining). The diploid chromosome number is 22, and autosomes comprise 5 pairs of metacentrics, 2 pairs of subacrocentrics, and 3 pairs of acrocentrics. The X chromosome is a acrocentric, and Y is a micro-chromosome, almost a point, which could be a marker chromosome of the species and the genus. The centromeric C-bands are very faint, and C-bands of Nos. 1, 2, 9 and Y chromosome are negative. Only one pair Ag-NORs was found on No. 10 in the silver-stained karyotype. The relationship between morphologic and chromosomal features was discussed, and C-banded karyotype evolutionary trend has also been discussed. Moreover, the conventional karyotype of Niviventer confucianus was described.

Nonequilibrium microstructures and their evolution in a Fe-Cr-W-Ni-C laser clad coating

The laser-solidified microstructural and compositional characterization and phase evolution during tempering at 963 K were investigated using an analytical transmission electron microscope with energy dispersive X-ray analysis. The cladded alloy, a powder mixture of Fe, Cr, W, Ni, and C with a weight ratio of 10:5:1:1:1, was processed with a 3 kW continuous wave CO2 laser. The processing parameters were 16 mm/s beam scanning speed, 3 mm beam diameter. 2 kW laser power, and 0.3 g/s feed rate. The coating was metallurgically bonded to the substrate, with a maximum thickness of 730 mu m, a microhardness of about 860 Hv and a volumetric dilution ratio of about 6%. Microanalyses revealed that the cladded coating possessed the hypoeutectic microstructure comprising the primary dendritic gamma-austenite and interdendritic eutectic consisted of gamma-austenite and M7C3 carbide. The gamma-austenite was a non-equilibrium phase with extended solid solution of alloying elements and a great deal of defect structures, i.e. a high density of dislocations, twins, and stacking faults existed in gamma phase. During high temperature aging, in situ carbide transformation occurred of M7C3 to M23C6 and M6C. The precipitation of M23C6, MC and M2C carbides from austenite was also observed.

铁基抗高温磨损激光熔覆涂层强韧设计和研究II:Fe-Cr-C-W-Ni激光熔覆层的微观组织及性能

本文以对热工模具进行失效分析的基础上，利用激光熔覆技术，在５ＣｒＭｎＭｏ基础上设计并制备强韧兼备的抗高温磨损涂层。

Comparison Of Shear Banding In Bmgs Due To Thermal-Softening And Free Volume Creation

This paper reports a comparative study of shear banding in BMGs resulting from thermal softening and free volume creation. Firstly, the effects of thermal softening and free volume creation on shear instability are discussed. It is known that thermal softening governs thermal shear banding, hence it is essentially energy related. However, compound free volume creation is the key factor to the other instability, though void-induced softening seems to be the counterpart of thermal softening. So, the driving force for shear instability owing to free volume creation is very different from the thermally assisted one. In particular, long wave perturbations are always unstable owing to compound free volume creation. Therefore, the shear instability resulting from coupled compound free volume creation and thermal softening may start more like that due to free volume creation. Also, the compound free volume creation implies a specific and intrinsic characteristic growth time of shear instability. Finally, the mature shear band width is governed by the corresponding diffusions (thermal or void diffusion) within the band. As a rough guide, the dimensionless numbers: Thermal softening related number B, Deborah number (denoting the relation of instability growth rate owing to compound free volume and loading time) and Lewis number (denoting the competition of different diffusions) show us their relative importance of thermal softening and free volume creation in shear banding. All these results are of particular significance in understanding the mechanism of shear banding in bulk metallic glasses (BMGs).

Formation of adiabatic shear band in metal matrix composites

A modified single-pulse loading split Hopkinson torsion bar (SSHTB) is introduced to investigate adiabatic shear banding behavior in SiCp particle reinforced 2024 Al composites in this work. The experimental results showed that formation of adiabatic shear band in the composite with smaller particles is more readily observed than that in the composite with larger particles. To characterize this size-dependent deformation localization behavior of particle reinforced metal matrix composites (MMCp), a strain gradient dependent shear instability analysis was performed. The result demonstrated that high strain gradient provides a deriving force for the formation of adiabatic shear banding in MMCp. (C) 2004 Elsevier Ltd. All rights reserved.

裂纹顶端位错的运动和小范围屈服的K_(Ⅱc)

本文从裂纹顶端位错运动的简化模型估计形成塑性区所消耗的功;从而计算临界裂纹扩展力。由于Ⅰ型加载和Ⅱ型加载的应力状态有所不同,裂纹顶端塑性功耗也会不一样。基于上述思想,考虑了小范围屈服的K_(Ⅰc)和K_(Ⅱc)的关系,得出K(Ⅱc)>K(Ⅰc)的结论,符合实验结果;并就K(Ⅱc)/K(Ⅰc)的比值与材料性能和温度的关系作了讨论。

Numerical analyses for the material bifurcation in plane sheet under tension

The various patterns (shear banding, surface wrinkling and necking) of material bifurcation in plane sheet under tension are investigated in this paper by means of a numerical method. It is found that numerical analysis can provide better ground for searching for the lowest critical loads. The inhomogeneity caused by void damage and the nonuniformity in the stress distribution across sheet thickness are proved to have detrimental effects on the material bifurcation. Nevertheless, material stability can be promoted by any means of depressing void damage or alleviating stress, even locally across the thickness. Besides, the peculiar behaviour of material bifurcation under slight biaxiality state is demonstrated. Copyright (C) 1996 Elsevier Science Ltd