Assessing the quality of water quality assessments: An analytical quality control protocol for benthic diatoms

In this paper, the background to the development of an analytical quality control procedure for the Trophic Diatom Index (TDI) is explained, highlighting some of the statistical and taxonomic problems encountered, and going on to demonstrate how the system works in practice. Most diatom-based pollution indices, including the TDI, use changes in the relative proportions of different taxa to indicate changing environmental conditions. The techniques involved are therefore much simpler than those involved in many studies of phytoplankton, for example, where absolute numbers are required.

Final report of the baseline data reconstruction for the Quality Assurance for Fish Marketing Project

A baseline survey for the project which had been conducted in 2009 had gaps that could not allow assessment of project performance in the outcome and impact indicators to be made. This study was, therefore, commissioned to reconstruct the baseline data, aligned to the impact and outcome indicators on the project logframe and results framework, against which project achievements could be assessed. The purpose and scope of the study was to reconstruct the baseline data and analysis describing the situation prior to QAFM Project inception, taking 2008 as the baseline year, which was aligned to the project logframe outcome and impact indicators; to collect data on current status to compare project outcome (and where possible impact) in improved fish handling sites in comparison with the baseline as well as with comparable non-improved fish landing sites as control group. The study was conducted through secondary data search from sources at NaFIRRI, DFR and ICEIDA. Field data collection was carried out using a sample survey covering 312 respondents including boat and gear owners, crew members, processors and traders at eight project and two control landing sites. Key Informant Interviews were conducted with DFOs and BMU leaders in the study districts and landing sites respectively.

International Seafood Conference 25. Jahrestagung der WEFTA (West European Fish Technologists' Association)

The 25th annual meeting of WEFTA was held in Noordwijkerhout, The Netherlands, in November 1995 as an "International Seafood Conference". In 12 sessions 40 oral presentations and 60 posters were presented. The topics included among others: Quality assurance, consumer demands and behaviour, processing, packaging, distribution, nutrition, storage, analytical methodology. The conference was attended by 210 participants from 33 countries.

Linking elements of the Integrated Ocean Observing System (IOOS) with the planned National Water Quality Monitoring Network. Proceedings from the NOAA-Supported workshop 19-21 September 2005

The National Oceanic and Atmospheric Administration (NOAA), in cooperation with the New Jersey Marine Sciences Consortium (NJMSC), hosted a workshop at Rutgers University on 19-21 September 2005 to explore ways to link the U.S. Integrated Ocean Observing System (IOOS) to the emerging infrastructure of the National Water Quality Monitoring Network (NWQMN). Participating partners included the Mid-Atlantic Coastal Ocean Observing Regional Association, U.S. Geological Survey, Rutgers University Coastal Ocean Observing Laboratory, and the New Jersey Sea Grant College. The workshop was designed to highlight the importance of ecological and human health linkages in the movement of materials, nutrients, organisms and contaminants along the Delaware Bay watershed-estuary-coastal waters gradient (hereinafter, the “Delaware Bay Ecosystem [DBE]”), and to address specific water quality issues in the mid-Atlantic region, especially the area comprising the Delaware River drainage and near-shore waters. Attendees included federal, state and municipal officials, coastal managers, members of academic and research institutions, and industry representatives. The primary goal of the effort was to identify key management issues and related scientific questions that could be addressed by a comprehensive IOOS-NWQMN infrastructure (US Commission on Ocean Policy 2004; U.S. Ocean Action Plan 2004). At a minimum, cooperative efforts among the three federal agencies (NOAA, USGS and EPA) involved in water quality monitoring were required. Further and recommended by the U.S. Commission on Ocean Policy, outreach to states, regional organizations, and tribes was necessary to develop an efficient system of data gathering, quality assurance and quality control protocols, product development, and information dissemination.

National Status and Trends Bioeffects Program: field methods

Environmental quality indicators provide resource managers with information useful to assess coastal condition and scientifically defensible decisions. Since 1984, the National Oceanic and Atmospheric Administration (NOAA), through its National Status and Trends (NS&T) Program, has provided environmental monitoring data on chemical, physical, and biological indicators of coastal environments. The program has two major monitoring components to meet its goals. The Bioeffects Assessments Program evaluates the health of bays, estuaries, and the coastal zone around the nation using the Sediment Quality Triad technique that includes measuring sediment contaminant concentrations, sediment toxicity and benthic community structure. The Mussel Watch Program is responsible for temporal coastal monitoring of contaminant concentrations by quantifying chemicals in bivalve mollusks. The NS&T Program is committed to providing the highest quality data to meet its statutory and scientific responsibilities. Data, metadata and information products are managed within the guidance protocols and standards set forth by NOAA’s Integrated Ocean Observing System (IOOS) and the National Monitoring Network, as recommended by the 2004 Ocean Action Plan. Thus, to meet these data requirements, quality assurance protocols have been an integral part of the NS&T Program since its inception. Documentation of sampling and analytical methods is an essential part of quality assurance practices. A step-by–step summary of the Bioeffects Program’s field standard operation procedures (SOP) are presented in this manual.

Guide to best practices for ocean CO2 measurements

CHAP 1 - Introduction to the Guide CHAP 2 - Solution chemistry of carbon dioxide in sea water CHAP 3 - Quality assurance CHAP 4 - Recommended standard operating procedures (SOPs) SOP 1 - Water sampling for the parameters of the oceanic carbon dioxide system SOP 2 - Determination of total dissolved inorganic carbon in sea water SOP 3a - Determination of total alkalinity in sea water using a closed-cell titration SOP 3b - Determination of total alkalinity in sea water using an open-cell titration SOP 4 - Determination of p(CO2) in air that is in equilibrium with a discrete sample of sea water SOP 5 - Determination of p(CO2) in air that is in equilibrium with a continuous stream of sea water SOP 6a - Determination of the pH of sea water using a glass/reference electrode cell SOP 6b - Determination of the pH of sea water using the indicator dye m-cresol purple SOP 7 - Determination of dissolved organic carbon and total dissolved nitrogen in sea water SOP 7 en Español - Determinacion de carbono organico disuelto y nitrogeno total disuelto en agua de mar SOP 11 - Gravimetric calibration of the volume of a gas loop using water SOP 12 - Gravimetric calibration of volume delivered using water SOP 13 - Gravimetric calibration of volume contained using water SOP 14 - Procedure for preparing sodium carbonate solutions for the calibration of coulometric CT measurements SOP 21 - Applying air buoyancy corrections SOP 22 - Preparation of control charts SOP 23 - Statistical techniques used in quality assessment SOP 24 - Calculation of the fugacity of carbon dioxide in the pure gas or in air CHAP 5 - Physical and thermodynamic data Errata - to the hard copy of the Guide to best practices for ocean CO2 measurements

Use of Sediment Bioassays to Verify Efficacy of Caulerpa taxifolia Eradication Treatments

Infestations of the marine macrophytic alga Caulerpa taxifolia were discovered in Agua Hedionda Lagoon, California in 2000. Rapid response actions included containment under pvc tarps coupled with injection of liquid sodium hypochlorite. To assess the efficacy of these treatments, replicated sediment cores were removed from representative treated sites and transferred to grow-out facilities. Similar cores from uninfested (control) sediments were removed, inoculated with viable explants of C. taxifolia and placed in grow-out facilities. Results from two sampling periods (1 year, 2 years post-treatment) showed that no viable C. taxifolia emerged in cores, and that inoculated “control” sediments supported normal growth. Eelgrass ( Zostera marina L.) seedlings emerged from native seed-banks in “treated” cores, which also supported growth of some invertebrates (annelid worms and hydroids). This study provided essential verification of C. taxifolia eradication efforts, and demonstrates the feasibility of incorporating quality control/quality assurance components in rapid response actions. Results of this study also suggest that seeds of eelgrass are viable for at least two years. (PDF has 9 pages.)

Integrated Sensor Systems for Vessels of Opportunity, National Oceanographic Centre, Southampton, UK, October 10-12,2006 : workshop proceedings

The use of self-contained, low-maintenance sensor systems installed on commercial vessels is becoming an important monitoring and scientific tool in many regions around the world. These systems integrate data from meteorological and water quality sensors with GPS data into a data stream that is automatically transferred from ship to shore. To begin linking some of this developing expertise, the Alliance for Coastal Technologies (ACT) and the European Coastal and Ocean Observing Technology (ECOOT) organized a workshop on this topic in Southampton, United Kingdom, October 10-12, 2006. The participants included technology users, technology developers, and shipping representatives. They collaborated to identify sensors currently employed on integrated systems, users of this data, limitations associated with these systems, and ways to overcome these limitations. The group also identified additional technologies that could be employed on future systems and examined whether standard architectures and data protocols for integrated systems should be established. Participants at the workshop defined 17 different parameters currently being measured by integrated systems. They identified that diverse user groups utilize information from these systems from resource management agencies, such as the Environmental Protection Agency (EPA), to local tourism groups and educational organizations. Among the limitations identified were instrument compatibility and interoperability, data quality control and quality assurance, and sensor calibration andlor maintenance frequency. Standardization of these integrated systems was viewed to be both advantageous and disadvantageous; while participants believed that standardization could be beneficial on many levels, they also felt that users may be hesitant to purchase a suite of instruments from a single manufacturer; and that a "plug and play" system including sensors from multiple manufactures may be difficult to achieve. A priority recommendation and conclusion for the general integrated sensor system community was to provide vessel operators with real-time access to relevant data (e.g., ambient temperature and salinity to increase efficiency of water treatment systems and meteorological data for increased vessel safety and operating efficiency) for broader system value. Simplified data displays are also required for education and public outreach/awareness. Other key recommendations were to encourage the use of integrated sensor packages within observing systems such as 100s and EuroGOOS, identify additional customers of sensor system data, and publish results of previous work in peer-reviewed journals to increase agency and scientific awareness and confidence in the technology. Priority recommendations and conclusions for ACT entailed highlighting the value of integrated sensor systems for vessels of opportunity through articles in the popular press, and marine science. [PDF contains 28 pages]

Status of the shrimp sector in Bangladesh in the context of HACCP and trade issues: a review

Shrimp culture in Bangladesh has emerged as an important aquaculture industry over the last three decades although its culture in greater parts of the farming area is done in traditional ways. In the meantime, the government of Bangladesh has taken necessary measures along with the private sectors to increase production, upgrade processing industries and to promote export performance. Long supply chain in raw material collection, inadequate infrastructure facilities, poor level of cool chain and lack of adequate HACCP-based training on hygiene and sanitation of different groups of people involved in the field level are the main problems of quality loss of raw materials. Shortage of raw materials results in poor capacity utilization of the processing plants. The growth of bagda (P. monodon) hatchery has expanded rapidly over the last few years, remaining mostly concentrated in Cox's Bazar region is enough to meet the target production. However, there is a shortage of pelleted shrimp feed in Bangladesh. A large number of export processors are now producing increasing amounts of value-added products such as individually quick-frozen, peeled and divined, butterfly cut shrimp, as well as cooked products. The export earnings from value added products is about half of the total export value. About 95% of total fish products are exported to European countries, USA and Japan and the remaining to the Southeast Asia and the Middle East. Most of the EU approved shrimp processing industries have been upgraded with laboratory facilities and provided HACCP training to their workers. As of now, HACCP is applied on the processing plants, but to ensure the quality of raw materials and to reduce risks, shrimp farms are also required to adopt HACCP plan. There is increased pressure time to time from importing countries for fish processors to establish effective quality assurance system in processing plants. Fish Inspection and Quality Control (FIQC) of the Department of Fisheries while having moderately equipped laboratories with chemical, bio-chemical and microbiological testing facilities and qualified technical personnel, the creation of facilities for testing of antibiotics is underway. FIQC mainly supervises quality aspects of the processing plants and has little or no control over raw material supply chains from farm to processing plants. Bangladesh export consignments sometimes face rejection due to reported poor quality of the products. Three types of barriers are reported for export of shrimp to EU countries. These are:(1) government participation in trade and restrictive practices (state aid, countervailing duties, state trading enterprises, government monopoly practices), customs and administrative entry procedures (anti-dumping duties, customs valuation, classification, formalities, rules of origin); (2) technical barriers to trade or TBT (technical regulations, standards, testing, certification arrangement); (3) specific limitations (quantitative restrictions, import licensing, embargoes, exchange control, discriminatory sourcing, export restraints, measures to regulate domestic prices, requirements concerning marking, labeling and packaging).

Organic Contaminant Analytical Methods of the National Status and Trends Program: 2000-2006

This document describes the analytical methods used to quantify core organic chemicals in tissue and sediment collected as part of NOAA’s National Status and Trends Program (NS&T) for the years 2000-2006. Organic contaminat analytical methods used during the early years of the program are described in NOAA Technical Memoranda NOS ORCA 71 and 130 (Lauenstein and Cantillo, 1993; Lauenstein and Cantillo, 1998) for the years 1984-1992 and 1993-1996, respectively. These reports are available from our website (http://www.ccma.nos.gov) The methods detailed in this document were utilized by the Mussel Watch Project and Bioeffects Project, which are both part of the NS&T program. The Mussel Watch Project has been monitoring contaminants in bivalves and sediments since 1986 and is the longest active national contaminant monitoring program operating in U.S. costal waters. Approximately 280 Mussel Watch sites are sampled on a biennial and decadal timescale for bivalve tissue and sediment respectively. Similarly, the Bioeffects Assessment Project began in 1986 to characterize estuaries and near coastal environs. Using the sediment quality triad approach that measures; (1) levels of contaminants in sediments, (2) incidence and severity of toxicity, and (3) benthic macrofaunal conmmunities, the Bioeffects Project describes the spatial extent of sediment toxicity. Contaminant assessment is a core function of both projects. These methods, while discussed here in the context of sediment and bivalve tissue, were also used with other matricies including: fish fillet, fish liver, nepheloid layer, and suspended particulate matter. The methods described herein are for the core organic contaminants monitored in the NS&T Program and include polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), butyltins, and organochlorines that have been analyzed consistently over the past 15-20 years. Organic contaminants such as dioxins, perfluoro compounds and polybrominated biphenyl ethers (PBDEs) were analyzed periodically in special studies of the NS&T Program and will be described in another document. All of the analytical techniques described in this document were used by B&B Laboratories, Inc, an affiliate of TDI-Brook International, Inc. in College Station, Texas under contract to NOAA. The NS&T Program uses a performance-based system approach to obtain the best possible data quality and comparability, and requires laboratories to demonstrate precision, accuracy, and sensitivity to ensure results-based performance goals and measures. (PDF contains 75 pages)

Metallothionein as an indicator of water quality: assessment of the bioavailability of cadmium, copper, mercury and zinc in aquatic animals at the cellular level

The study of metallothioneins (MTs) has greatly improved our understanding of body burdens, metal storage and detoxification in aquatic organisms subjected to contamination by the toxic heavy metals, Cd, Cu, Hg and Zn. These studies have shown that in certain organisms MT status can be used to assess impact of these metals at the cellular level and, whilst validation is currently limited to a few examples, this stress response may be linked to higher levels of organisation, thus indicating its potential for environmental quality assessment. Molluscs, such as Mytilus spp., and several commonly occurring teleost species, are the most promising of the indicator species tested. Natural variability of MT levels caused by the organism's size, condition, age, position in the sexual cycle, temperature and various stressors, can lead to difficulties in interpretation of field data as a definitive response-indicator of metal contamination unless a critical appraisal of these variables is available. From laboratory and field studies these data are almost complete for teleost fish. Whilst for molluscs much of this information is lacking, when suitable controls are utilised and MT measurements are combined with observations of metal partitioning, current studies indicate that they are nevertheless a powerful tool in the interpretation of impact, and may prove useful in water quality assessment.

The microbiological quality of water: the nature of the problem

Improvements in methods for the detection and enumeration of microbes in water, particularly the application of techniques of molecular biology, have highlighted shortcomings in the ”standard methods” for assessing water quality. Higher expectations from the consumer and increased publicity associated with pollution incidents can lead to an uncoupling of the cycle which links methodological development with standard-setting and legislation. The new methodology has also highlighted problems within the water cycle, related to the introduction, growth and metabolism of microbes. A greater understanding of the true diversity of the microbial community and the ability to transmit genetic information within aquatic systems ensures that the subject of this symposium and volume provides an ideal forum to discuss the problems encountered by both researcher and practitioner.

Regional variation in the annual feeding cycle of juvenile walleye pollock (Theragra chalcogramma) in the western Gulf of Alaska

Juvenile fish in temperate coastal oceans exhibit an annual cycle of feeding, and within this cycle, poor wintertime feeding can reduce body growth, condition, and perhaps survival, especially in food-poor areas. We examined the stomach contents of juvenile walleye pollock (Theragra chalcogramma) to explain previously observed seasonal and regional variation in juvenile body condition. Juvenile walleye pollock (1732 fish, 37–250 mm standard length) of the 2000 year class were collected from three regions in the Gulf of Alaska (Kodiak, Semidi, and Shumagin) representing an area of the continental shelf of ca. 100,000 km2 during four seasons (August 2000 to September 2001). Mean stomach content weight (SCW, 0.72% somatic body weight) decreased with fish body length except from winter to summer 2001. Euphausiids composed 61% of SCW and were the main determinant of seasonal change in the diets of fish in the Kodiak and Semidi regions. Before and during winter, SCW and the euphausiid dietary component were highest in the Kodiak region. Bioenergetics modeling indicated a relatively high growth rate for Kodiak juveniles during winter (0.33 mm standard length/d). After winter, Shumagin juveniles had relatively high SCW and, unlike the Kodiak and Semidi juveniles, exhibited no reduction in the euphausiid dietary component. These patterns explain previous seasonal and regional differences in body condition. We hypothesize that high-quality feeding locations (and perhaps nursery areas) shift seasonally in response to the availability of euphausiid

Water quality monitoring in the Mersey

This is the Water Quality Monitoring in the Mersey Estuary report produced by the Environment Agency in 2001. This report focuses on the Water Quality Monitoring Programme held in the Mersey Estuary. Since the mid-1960s water samples have been collected at approximately monthly intervals along the length of the estuary between Warrington and New Brighton and in later years further off-shore. This data-set provides an invaluable resource to determine how the very large capital spending of recent years has resulted in the dramatic improvements in water quality that we are now able to record. Initially, the interest was focused on parameters such as dissolved oxygen, BOD, nutrients and suspended solids. Over the last decades, as analytical methods have improved, toxic metals and persistent organic compounds have been included in the routine monitoring programme at a limited number of sites. Moreover, with the introduction of the European Water Framework Directive monitoring programmes it was an opportune time to review the Mersey monitoring strategy. This revised monitoring programme required data from several other components (water, sediments, flora, fauna, fish and birds. This report also contains information about Routine monthly surveys, Special surveys, Chloralkali Directive, UKNMP, British Geological Survey, EDMAR and NERC Environmental Diagnostics Thematic Programme.

Major and trace element analytical methods of the National Status and Trends Program: 2000-2006

This document contains analytical methods that detail the procedures for determining major and trace element concentrations in bivalve tissue and sediment samples collected as part of the National Status and Trends Program (NS&T) for the years 2000-2006. Previously published NOAA Technical Memoranda NOS ORCA 71 and 130 (Lauenstein and Cantillo, 1993; Lauenstein and Cantillo, 1998) detail trace element analyses for the years 1984-1992 and 1993-1996, respectively, and include ancillary, histopathology, and contaminant (organic and trace element) analytical methods. The methods presented in this document for trace element analysis were utilized by the NS&T Mussel Watch and Bioeffects Projects. The Mussel Watch Project has been monitoring contaminants in bivalves and sediment for over 20 years, and is the longest active contaminant monitoring program operating in U.S. costal waters. Approximately 280 Mussel Watch sites are monitored on biennial and decadal timescales using bivalve tissue and sediment, respectively. The Bioeffects Project applies the sediment quality approach, which uses sediment contamination measurements, toxicity tests and benthic macroinfauna quantification to characterize pollution in selected estuaries and coastal embayments. Contaminant assessment is a core function of both projects. Although only one contract laboratory was used by the NS&T Program during the specified time period, several analytical methods and instruments were employed. The specific analytical method, including instrumentation and detection limit, is noted for each measurement taken and can be found at http://NSandT.noaa.gov. The major and trace elements measured by the NS&T Program include: Al, Si, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Sn, Sb, Ag, Cd, Hg, Tl and Pb.